• Fully enclosed high-torque, fan-cooled motor
• Commercial 12.6 amp motor, 1-1/2 Hp
• Permanently lubricated, dual-sealed, heavy-duty blade shaft bearings
• Multi-position motor post cutting head for convenient cutting of various tile sizes
• Built-in water distribution system supplies water to both sides of the blade
• Variable height cutting head allows for plunge cutting and use of blades smaller than 10" in diameter
• Blade guard accommodates 6" and 8" profile wheels
• Micro V-belt drive for maximum horsepower transfer
• Blade shaft lock for easy blade removal
• Linear-bearing and chrome-plated guide-bar assembly ensure precise cutting
• Cast aluminum blade guard and motor post
• One-piece reinforced zinc-plated steel frame for durability
• Made in USA
• One-year limited warranty
1315 Storm Parkway, Torrance, CA 90501 | P 800.421.5830 | F 310.539.5158
www.mkdiamond.com | customerservice@mkdiamond.com
MK-101 1-1/2 HP, 10" Wet Cutting Tile Saw
The MK-101 saw features a powerful, high torque motor for improved
performance to tackle all cutting jobs. The one-piece unitized steel frame is
built for increased durability. The covered linear guide bar system provides
precise cutting on the entire length of the cut. The blade guard has been engineered to provide optimal water flow and is wide enough to accommodate
a profile wheel. One-year limited warranty.
Two position motor
post and cutting
head for convenient
cutting of various
tile sizes
Motor Electric
Power 1-1/2 HP, 120V
Blade Capacity 10" (254 mm)
Depth of Cut 3" (76 mm)
Length of Cut 20" (508 mm)
Locking blade
shaft for easy
blade removal
Diagonally Cut 14" (356 mm) Tile
L x W x H (inches) 36" x 22" x 23"
L x W x H (mm) 914 x 559 x 584
Weight 92 lbs. (42 kg)
10" Wet Cutting Diamond Blade
Water Pump
• Rip Guide
• 45º Miter
Part# 151991
Optional Folding Stand
Part# 168244
Stand w/ Casters
6" and 8" profile
(Motor available in other electrical configurations)
1315 Storm Parkway, Torrance, CA 90501 | P 800.421.5830 | www.mkdiamond.com | F 310.539.5158
© 2014 MK Diamond Products, Inc. All Rights Reserved. Images and specifications are subject to change without notice. MK-101 Sell Sheet Part # AP080135 (03/14)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF