Classen TR-20RB T Specifications

Classen TR-20RB T Specifications
MODELS:
Rev. B 07-2013
MAN C100561
SCHV-18/5.5
SCHV-18/8.0
PARTS MANUAL C100578
OPERATORS MANUAL
HYDRO-DRIVE SOD CUTTER
TABLE OF CONTENTS
Safety..................................................................................................... 3-6
Labels.................................................................................................... 6-7
Set-up.................................................................................................... 7
Maintenace / Storage........................................................................... 8
Introduction........................................................................................... 8
Owners Record...................................................................................... 8
Pre-Delivery Check List............................................................................ 9
Delivery Check List................................................................................. 9
Operation............................................................................................... 10-12
Troubleshooting Chart......................................................................... 13
Specifications....................................................................................... 14
Declaration of Conformity................................................................... 15
Warranty................................................................................................ 16
See Parts Manual for service parts call out.
2
SAFETY
NOTICE !!!
This symbol means:
ATTENTION!
BECOME ALERT!
Unauthorized modifications may present extreme
safety hazards to operators and bystanders and
could also result in product damage.
Your safety and the safety of others is involved.
Schiller Grounds Care, Inc. strongly warns against,
rejects and disclaims any modifications, add-on
accessories or product alterations that are not designed, developed, tested and approved by Schiller
Grounds Care, Inc. Engineering Department. Any
Schiller Grounds Care, Inc. product that is altered,
modified or changed in any manner not specifically
authorized after original manufacture–including the
addition of “after-market” accessories or component
parts not specifically approved by Schiller Grounds
Care, Inc. will result in the Schiller Grounds Care,
Inc. Warranty being voided.
Any and all liability for personal injury and/or property damage caused by any unauthorized modifications, add-on accessories or products not approved
by Schiller Grounds Care, Inc. will be considered the
responsibility of the individual(s) or company designing and/or making such changes. Schiller Grounds
Care, Inc. will vigorously pursue full indemnification and costs from any party responsible for such
unauthorized post-manufacture modifications and/or
accessories should personal injury and/or property
damage result.
Signal word definitions:
The signal words below are used to identify levels of hazard
seriousness. These words appear in this manual and on the
safety labels attached to Schiller Grounds Care, Inc. machines. For your safety and the safety of others, read and
follow the information given with these signal words and/or
the symbol shown above.
!
DANGER indicates a hazardous situation which, if not
avoided, WILL result in death or serious injury.
! WARNING WARNING indicates a hazardous situation which, if not
avoided, COULD result in death or serious injury.
!
CAUTION indicates a hazardous situation which, if not avoided, COULD result in minor or moderate injury. It may also be
used to alert against unsafe practices or property damage.
!
CAUTION used without the safety alert symbol indicates a
potentially hazardous situation which, if not avoided, MAY
result in property damage.
MODEL NUMBER: This number appears on
sales literature, technical manuals and price
lists.
SERIAL NUMBER: This number appears only
on your machine. It contains the model number
followed consecutively by the serial number.
Use this number when ordering parts or seeking warranty information.
CALIFORNIA
Proposition 65 Warning
Diesel engine exhaust and some
of its constituents are known to the
State of California to cause cancer,
birth defects and other reproductive
harm.
CALIFORNIA
Proposition 65 Warning
Battery posts, terminals, wiring
insulation, and related accessories
contain lead and lead compounds,
chemicals known to the State of
California to cause cancer and birth
defects or other reproductive harm.
WASH HANDS AFTER HANDLING.
! WARNING
The engine exhaust from
this product contains
chemicals known to the
State of California to
cause cancer, birth defects
or other reproductive
harm.
3
SAFETY
Machine Preparation
Operator preparation and training
Read the Operation & Safety Manual
• If an operator or mechanic
cannot read English, it is
the owner's responsibility to
explain this material to them.
If any portion of this material is unclear, contact your
factory representative for
clarification.
• B
ecome familiar with the safe operation of the equipment, operator controls and safety signs. Be prepared
to stop the engine quickly in an emergency. Do not operate or allow another person to operate this machine
if there are any questions about safety.
• A
ll operators and mechanics should be trained. The
owner is responsible for training the users.
• W
ear appropriate clothing, including safety goggles or
safety glasses with side shields when operating. Do
not operate barefoot or wearing open sandals. Long
hair, loose clothing or jewelry may get tangled in moving parts.
• Wear hearing protection.
• Wear safety glasses.
• N
ever allow underage children, unskilled or improperly
trained people to operate this equipment. Local regulations
can restrict the age of the operator.
• K
eep warning labels and this operator's manual legible and intact. Replacement labels and manuals are
available from the factory.
• K
eep all fasteners such as nuts, bolts and pins well
secured.
• V
isually inspect blade and blade bolts for wear or
damage. Replace worn or damaged blades and bolts.
• V
erify that machine and attachments, if any, are in
good operating condition.
• Do not engage blade until ready to cut sod.
OPERATING SAFELY
In General
• U
se extra care when loading or unloading the machine
into a trailer or truck.
• U
se caution when making turns and crossing roads
and sidewalks. Stop blade when not cutting sod.
• D
o not run the engine in an enclosed area where dangerous carbon monoxide fumes can collect.
• N
ever leave a machine unattended. Always turn off
blade and stop engine when leaving the operator
position. When leaving the machine be sure the wheel
drive clutch is engaged.
• Use extreme caution when reversing or pulling machine towards you.
Storage Safety
• Stop the engine and allow to cool before storing.
• Drain the fuel tank outdoors only.
• D
o not operate machine while under the influence of
drugs or alcohol.
• S
tore fuel in an approved container in a cool, dry
place.
• T
he owner/user can prevent and is responsible for
accidents or injuries occurring to themselves, other
people or property.
• K
eep the machine and fuel containers in a locked storage place to prevent tampering and to keep children
from playing with them.
Site preparation and circumstances
• Evaluate the terrain to determine how to safely perform the job. Only use accessories and attachments
approved by the manufacturer.
• Clear the area to be cut of objects such as rocks, toys,
wire or other debris that may be thrown or get tangled
in the sod cutter.
• Identify and mark objects to be avoided such as sprinkler heads, stakes, water valves, etc.
• B
e sure the area is clear of pets and people, especially young children. Never assume they will remain
where you last saw them. Stop the machine if any
enter the area.
• Cut sod only in daylight or in good artificial light.
Machine Preparation
• Do not tamper with or defeat safety devices. Keep
4
guards, shields and interlock safety devices in place
and in proper working condition. They are for your
protection.
• D
o not store the machine or fuel container near heating appliances with an open flame, such as a water
heater, or an appliance with a pilot light.
• K
eep gasoline storage area free of grass, leaves and
excessive grease to reduce fire hazard.
• C
lean grass and debris from cutting units, drives, mufflers and engine to help prevent fires.
Storage Safety
• S
tart according to instructions in this manual or on the
machine.
• B
efore attempting to start the engine, make sure the
master clutch is disengaged.
• When starting the engine, make sure hands and feet
are clear of the blade.
• D
o not change engine governor settings or overspeed
the engine. Operating the engine at excessive speed
can increase the hazard of personal injury.
SAFETY
MAINTENANCE SAFETY
Operating On Slopes
Use Extra Care When Working On Slopes
• D
o not operate on slopes if uneasy or uncertain. Ultimate responsibility for safe operation on slopes rests
with the operator.
• Do not operate on steep slopes.
• Keep all movement on slopes slow and gradual.
• D
o not cut sod near drop-offs, ditches or embankments. The machine could suddenly turn over if a
wheel runs over the edge or an edge caves in.
• D
o not turn on slopes unless necessary, and then turn
slowly and downhill when possible.
• Be sure of your footing on slopes.
Interrupting Operation
• Before leaving the operator’s position:
— Park on level ground.
— Disengage the master clutch.
— Shut off the engine.
• D
isengage the master clutch and wait until the blade
stops moving then disengage the blade clutch:.
— when not cutting sod;
— for transport;
— when crossing surfaces other than grass.
• S
top the engine, disengage the master clutch and wait
until the blade stops moving:
— before refueling;
— before making blade adjustment.
• S
top the engine, disengage the master clutch, and
disconnect the spark plug wire(s):
­­­— before clearing blockages;
­— before checking, cleaning or working on the machine;
­— after striking a foreign object. Inspect the machine
for damage and make repairs before restarting;
— if the machine begins to vibrate abnormally: shut off
machine immediately. Inspect and make repairs as
needed before restarting;
— except for repairs or adjustments as specifically
noted, such as for carburetor adjustment, where
the engine must be running. Keep hands and feet
clear of moving parts in these circumstances.
• A
llow the blade to come to a complete stop when
stopping operation to clear blockages, unclog, inspect
the machine, do maintenance or repair.
• R
educe the throttle setting during engine shut-down
and, if the engine is provided with a shut-off valve, turn
the fuel off at the conclusion of operation.
In general
• Maintain machine according to manufacturer’s schedule and instructions for maximum safety
and best results.
• Park machine on level ground.
• Never allow untrained personnel to service machine.
• Guards should only be removed by qualified maintenance technician for maintenance/service. Replace
when work is complete.
• Adjust or repair only after the engine has been
stopped and the blade has stopped moving.
• Disconnect spark plug wire(s) before doing any maintenance.
• Replace parts if worn, damaged or faulty. For best
results, always replace with parts recommended by
the manufacturer.
• Do not dismantle the machine without releasing or
restraining forces which may cause parts to move
suddenly.
• Provide adequate support, e.g. jack stands for lifted
machine or parts if working beneath.
• Do not put hands or feet near or under
rotating parts.
• Clean up spilled oil or fuel thoroughly.
• Replace faulty mufflers.
• To reduce fire hazards, keep the engine, muffler, and
fuel storage area free of grass, leaves, debris buildup
or grease.
Blades
The sod cutter blade is sharp and can cut. Use extra caution
when handling. Remove obstructions with care. Wrap the
blade or wear gloves.
• Only replace blade. Never straighten or weld.
• Keep other persons away from blades.
Fuel
•
Petrol (gasoline) and diesel fuels
are flammable; petrol (gasoline) vapors are explosive.
Use extra care when handling.
•
Store only in containers specifically designed for fuel.
•
When refueling or checking fuel level:
• Stop the engine and allow to cool;
• Do not smoke;
!
WARNING
• Refuel outdoors only;
• Use a funnel;
• Do not overfill;
• If fuel is spilled, do not attempt to
start the
engine until the spill is cleaned up and vapors have
5
SAFETY
cleared.
• Replace caps on fuel containers and tanks
securely.
!
WARNING
Storage Safety
• Stop the engine and allow to cool before storing.
• Drain the fuel tank outdoors only.
• S
tore fuel in an approved container in a cool, dry
place.
Sparks from static electricity can start
fires or cause explosions. Flowing fuel
can generate static electricity. To prevent
static electricity sparks:
• Keep fuel containers electrically grounded. Do not fill
containers in a vehicle or on a truck or trailer bed with
a plastic liner. Fill containers on the ground away from
the vehicle.
• When practical, remove petrol (gas) powered equipment from the truck or trailer and refuel it on the
ground. If equipment must be refueled on the truck or
trailer, refuel from a portable container rather than a
dispenser nozzle.
• K
eep the machine and fuel containers in a locked storage place to prevent tampering and to keep children
from playing with them.
• D
o not store the machine or fuel container near heating appliances with an open flame, such as a water
heater, or an appliance with a pilot light.
• K
eep gasoline (petrol) storage area free of grass,
leaves and excessive grease to reduce fire hazard.
• C
lean grass and debris from cutting units, drives, mufflers and engine to help prevent fires.
• Keep the dispenser nozzle in contact with the rim of
the fuel tank or container opening until fueling is complete. Do not use a nozzle lock-open device.
LABELS
ATTENTION:
Read and understand Operator Manual.
Replace manual if lost or damaged.
ATTENTION:
Wear hearing protection and safety
glasses.
ENGINE THROTTLE
CONTROL:
Move forward to increase
engine speed.
Move rearward to decrease engine speed.
MASTER CLUTCH:
Move lever forward to engage.
Move lever rearward to disengage.
6
UNDERGROUND UTILITY HAZARD:
Contacting underground utilities may cause leaks, explosions
or electrocutions.
• Check operation area for underground utilities such as
electrical, gas, and water lines.
• Do not operate where underground utilities are present.
LABELS
ROTATING PARTS:
Entanglement / Amputation Hazard
Do not operate with cover removed.
Stop engine before servicing.
Moving blades/blade
arms
cut/crush Hazard
Stay clear of blade/
blade arms while
operating.
Stop engine before
servicing
or adjusting.
To prevent injury, wear appropriate eye protection and
stand clear when cutting banding. Banding is under tension and may snap back when cut.
ATTENTION:
• Read Operator Manual
before servicing or repairing.
• Remove spark plug wire
before servicing or repairing.
SET-UP
1. Remove crate top, sides and plastic covering unit.
Remove the banding attaching the Sodcutter to
the pallet.
2. Roll the Sodcutter off the pallet. The unit can also
be driven off the pallet, but first read the Safety,
Controls, and Operation sections of this manual,
then check the oil and add gas.
3. Dispose of pallet, crate, plastic and banding in a
responsible manner.
7
MAINTENANCE / STORAGE
Storage Instructions
! WARNING
To prevent possible explosion or ignition of vaporized fuel, do not store equipment with fuel in tank or
carburetor in enclosure with open flame (for example,
a furnace or water heater pilot light).
Daily Storage
1. Check engine oil level and air filter element daily.
2. Check oil level in gear case.
3. Close fuel valve at bottom of fuel tank.
4. Clean cutting blade (grass, dirt, etc.).
Extended Storage
Before the equipment is put into storage for any
period exceeding 30 days:
1. Drain all fuel from fuel tank and lines (use a
hose or fuel line, routed from fuel tank shut-off to
proper container).
INTRODUCTION
Thank You
Thank you for purchasing the Classen Model SCHV-24,
SCHV-20, SCHV-18, SCHV-16, or SCHV-12 sod cutter.
Read This Manual
Read this manual carefully to learn how to operate sod cutter correctly. Failure to do so could result in personal injury
or equipment damage.
This manual should be considered a permanent part of your
sod cutter and should remain with it if you sell it.
Warranty
2. Start engine and run until all fuel is used from the
carburetor float bowl.
3. While engine is warm, check the transmission oil
and refill with the proper weight of oil corresponding to the season when the equipment will next
be used.
4. Remove the spark plug and squirt a small quantity of engine oil into the cylinder. Turn the engine
over a few times to distribute the oil.
5. Lubricate all lubrication fittings.
6. Clean and oil cutting blade to prevent rust.
To put equipment into operation after an
extended storage:
1. Fill fuel tank with clean fresh fuel.
2. Check crankcase oil level, and start engine.
3. Check fuel system for fuel leaks.
Measurements
U.S. units of measure are used in this manual.
Serial Numbers
Write frame and engine serial numbers, plus model numbers in “Owners Record” section below. Your dealer needs
these numbers when you order parts. The serial number is
located on a sticker on the center section of the frame.
Directions
“Right Hand” and “Left Hand” sides of the sod cutter are determined by facing the back of the sod cutter as you would
operate the machine.
Refer to back page.
OWNER’S RECORD
Date Purchased___________________________________________________________________________________
Sod Cutter Model Number__________________________________________________________________________
Sod Cutter Serial Number___________________________________________________________________________
Engine Model Number______________________________________________________________________________
Engine Serial Number______________________________________________________________________________
8
LISTS
PRE-DELIVERY CHECK LIST
DELIVERY CHECK LIST
Check the following before you deliver the sod cutter to
the customer.
Review the operators manual with the customer.
Explain the following:
1. Guards and shields fastened in place.
1. Schiller Grounds Care, Inc. warranty.
2. Decals fastened and legible.
2. Safe operation and service.
3. Tire pressure.
3. How to use controls.
4. Gas lever on engine turned on.
4. Operating the machine correctly.
5. All eight lubrication points greased.
5. Transporting the sod cutter.
6. 2:1 gearbox oil level.
6. Correct fuel and lubricants.
7. Engine oil level.
7. Daily and periodic inspections.
8. Air cleaner.
8. Changing oil after break-in period.
9. Touch up scratches.
9. Servicing the sod cutter regularly and correctly.
10. Chain tight.
10. Schiller Grounds Care, Inc. parts and service.
11. Engine belt tight.
11. Give the customer the operators manual and
encourage customer to read it.
12. Levers working properly.
13. All controls.
14. Add fuel, start engine, test run.
DATE SET UP __________/__________/__________
DATE DELIVERED __________/__________/__________
SIGNATURE ___________________________________
NOTES:_______________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
9
OPERATION
PRE-OPERATION CHECK LIST
(operator’s responsibility)
• R
eview and follow all safety rules and safety
decal instructions.
• C
heck that all safety decals are installed and
in good condition. Replace if damaged.
• C
heck to make sure all shields and guards are
properly installed and in good condition.
• C
heck that all hardware is properly installed
and secured.
• C
heck to be sure engine is free of dirt and debris.
Pay particular attention to the cooling fins, governor
parts and muffler. Clean air intake screen. Check
air cleaner; service is necessary.
!
WARNING
Petrol (gasoline) is extremely flammable and highly explosive under certain
conditions. BE SURE to install fuel cap
after refueling.
Fill fuel tank with good quality, clean, unleaded regular
gasoline to the level recommended by the engine
manufacturer.
To Check or Add Fuel:
• Use a funnel to avoid spilling.
• Do it outdoors.
• Inspect area. Remove stones or other hard objects
that might cause damage.
• Do not smoke.
• C
heck that there are no underground utilities
in work area.
• Do not overfill.
• C
heck all lubrication points and grease as
instructed in manual.
• P
erform a functional check of the safety interlock
system each time you operate the unit. If it doesn’t
work, repair before using the machine.
• Stop the engine; allow to cool.
• Clean up spilled fuel.
SAFETY
Operate Safely
Carefully read this manual and operate sod cutter correctly.
Protect Children
!
WARNING
ALL GUARDS MUST
BE IN PLACE WHILE
MACHINE IS IN OPERATION.
!
WARNING
KEEP HANDS AND
FEET AWAY FROM
MOVING PARTS.
READ SAFETY SIGNS
Carefully read and follow caution stickers.
BEFORE STARTING THE ENGINE
1. B
e familiar with the controls, how each functions,
and what each operates.
2. C
heck engine oil level. Add oil if necessary, following
the engine manufacturer’s recommendations. Refer to
engine manual supplied with machine.
3. Check Hydro gear oil, add 20W50 oil if necesssary.
4. Open the fuel valve.
5. F
ill the fuel tank with the amount and type of fuel
recommended by the engine manufacturer.
10
Keep children and pets out of the area where you are
cutting sod.
Avoid Tipping
Make sure you do not get too close to sharp drop-offs to
avoid tipping sod cutter over.
Operate Safely On Slopes
You may cut sod any direction on slopes, however, make
sure you do this carefully. Cutting on slopes can be dangerous. To avoid any accidents, make sure to leave yourself
room to correct the problem if one arises. Always park your
sod cutter on level ground.
Practice Safe Maintenance
Keep all machine parts in good condition and fastened in
place. Fix damages immediately. Replace worn or broken
parts. Whenever you work on the sod cutter, disconnect
spark plug wire.
Start Engine Safely
Make sure hands and feet are out of the way of moving
parts when starting engine.
OPERATION
!
WARNING
When replacement parts are
required, use genuine Schiller
Grounds Care, Inc. parts or
parts with equivalent characteristics, including type, strength
and material. Failure to do so
may result in product malfunction and possible injury to the
operator and/or bystanders.
Carbon monoxide present in the exhaust is an odorless
and deadly gas. Never start or run the engine inside where
exhaust fumes can collect.
Provide enough fresh air to keep fumes from getting too
strong. Replace any warning decal that becomes illegible
immediately.
ENGINE STARTING PROCEDURES
NOTICE: There are two locations on this engine that require
oil, both the crankcase and the transmission (gearbox).
Running the engine or gearbox with a low oil level can
cause engine damage. Refer to the engine manual for complete engine information and recommendations.
Engine Oil Level Check
Starting Engine
1. Turn fuel cock to the “open” position.
2. Turn choke on (closed).
3. Turn ignition switch to “on”.
4. Move throttle lever on engine to half throttle position.
5. Pull recoil starter rope until engine starts.
6. After engine is warm, turn off choke (open).
7. Allow engine to run one minute before cutting sod.
8. Check engine rpm setting before operating. DO NOT
exceed 3600 rpm.
Stopping Engine
1. Turn throttle to “slow” position.
2. Turn off ignition switch.
OPERATING THE SOD CUTTER
Preparation
1. Police lawn area for obstacles and debris (i.e. sprinklers, hoses, toys, etc.). Remove all items.
2. Make sure underground sprinkler heads and other hidden obstacles are marked to prevent damage.
• make certain the engine is level
3. Mark other areas where sod cutting will be a problem
or too risky (i.e. mud, tree roots, steep hills).
• the engine switch is in the OFF position
Operating
1. BEFORE CHECKING ENGINE:
• the sod cutter blade is NOT engaged
• the drive wheels are disengaged.
2. Remove the filler cap/dipstick and wipe it clean.
3. Insert and remove the dipstick without screwing it into
the filler neck. Check the oil level shown on the dipstick.
4. If the oil level is low, fill to the edge of the oil filler hole
with the recommended oil. SAE 10W-30 is recommended for general use. Refer to engine oil recommendations in engine manual for other viscosities and
information.
5. Screw in the filler cap/dipstick securely.
Transmission Oil Level Check
1. C
heck the transmission oil level with the engine stopped
and in a level position.
2. Remove the filler cap/dipstick and wipe it clean.
3. Insert and remove the dipstick without screwing it into
the filler hole. Check the oil level shown on the dipstick.
4. If the oil level is low, add oil to reach the upper limit
mark on the dipstick. Use the same oil that is recommended for the engine, SAE 10W-30.
5. Screw in the filler cap/dipstick securely.
1. Start the engine. CAUTION: To avoid injury, do not
place your feet or other body parts under the blade
while starting the engine.
2. Select the correct cutting depth desired up to 2 1/2
inches. Loosen the tee handle from the depth gauge
plate, located under the height adjustment bar, (#3
on illustration) and put it to the correct height setting.
Tighten the tee handle.
3. Push the wheel drive transport handle (#5 on illustration) and the cutter blade speed handle (#4 on illustration) to the desired speed, toward the engine.
4. Raise the main handle upward so the front nose of the
sod cutter rests on the ground.
5. Loosen the 1/2” handle nut (#2 on illustration) and
lower the height adjustment bar to rest on the depth
gauge. Now tighten the 1/2” handle nut securely so it
will not loosen with the vibration of the machine.
6. Go to the back of the machine and lower the handle
until the cutting blade rests on the ground. You are
now ready to cut sod.
7. T
urn the throttle to the desired operating speed by
pulling the finger throttle control (#6 on illustration)
toward you. Maximum engine rpm is recommended for
smooth operation.
11
OPERATION
8. A
fter cutting a short distance, stop machine by letting
the finger throttle control go back to its original position. Check thickness of cut and adjust if necessary.
9. A
t the end of each cutting pass, lift up on the handle
bar to clear the cutting blade from the sod. Retard the
throttle control and turn machine around into the position for the next cut.
10. W
hen finished cutting sod, reverse steps 6 through 3,
leaving the wheel drive handle on for transportation.
!
WARNING
BLADE SHARPENING – Wear the appropriate personal
protective equipment when sharpening blades. Use correct
tools for sharpening or when servicing machine.
GENERAL MAINTENANCE
To keep the sod cutter in good operating condition, perform
the following:
•Keep blade sharp; a sharp blade cuts cleaner, faster
and more uniformly and places less load on the machine. Sharpen cutting edge on bevel or top side only.
•Keep drive belt at proper tension and free of oil and dirt
at all times.
•Check engine oil level and air filter element daily.
•Check Hydro Gear oil (20W50 oil).
•Check for loose bolts and connections.
•All grease fittings are pressurized type. Use a good
grade Lithium Base Grease or equivalent. Grease
eccentric arms sparingly every 4 hours of service, all
others daily. Wipe off all grease fittings before and
after each greasing (there are a total of 8 grease fittings).
•To make sure the chain on the front drive wheels is
tight, you will need to remove the chain guard to
check this. If tightening is required, loosen nuts and
bolts on the 3/4” pillow block bearings and push the
bearings toward the back of the sod cutter until chain
is tight. Make sure both bearings go back evenly to
keep jackshaft running even with the frame. After doing this, retighten nuts and bolts on the bearing and
replace the chain guard.
•Engine (refer to Honda owner’s manual).
!
SAFETY WARNING
DO NOT STORE GASOLINE (PETROL) UNNECESSARILY
OVER LONG PERIODS OF TIME. TO PREVENT
POSSIBLE EXPLOSION, STORE ONLY IN AN
APPROVED “SAFE” CONTAINER. TO PREVENT EXPLOSION OF VAPORIZED FUEL, DO NOT STORE MACHINE
WITH FUEL IN TANK OR CARBURETOR
IN AN ENCLOSURE WITH OPEN FLAME.
(EXAMPLE: FURNACE OR WATER HEATER PILOT LIGHT.)
12
TROUBLESHOOTING CHART
Only on Gear Drive Models
PROBLEM
CAUSE
REMEDY
Blade will not stay in ground
replaced
a. Bottom of blade is rounded off
a. Blade should be sharpened or
Belts jump off
a. Wrong type of belt
b. Pulley misalignment
a. Use only the special factory belt
b. Realign pulley
NOTES:____________________________________________________________________________________________
__________________________________________________________________________________________________
__________________________________________________________________________________________________
__________________________________________________________________________________________________
__________________________________________________________________________________________________
__________________________________________________________________________________________________
13
SPECIFICATIONS
SELF-PROPELLED WALK-BEHIND SOD CUTTER
SCHV-18/5.5 - S.N. 000101 & UP; SCHV-18/8.0 - S.N. 000101 & UP
ENGINE
Model................................................. 4 cycle 5.5 H. P. Honda
Model GX160 GX1600HV
9.9 cu. in. (163 cc)
GEAR CASE
Starter........................................................................... Recoil
Capacity.........................................................31/2Pints(1.7L)
Governor.............................. 3600 RPM ± 100 RPM, no load
Hydro Gear Oil...........................................................20W50
Clutch.................................. spring loaded belt tightener type
REDUCTION
Lubrication..................................................EP 140 Gear lube
Cutting depth......................................................up to 2-1/2”
Engine to blade......................................................... 3.03 to1
Engine to drive wheels............................................. 57.2 to 1
Blade speed....................... 1188 RPM @ 3600 engine RPM
WHEELS:
Drive............................................ 8” (203 mm) Dia. w/knobby
tread vulcanized to hub
DIMENSIONS
Rear................. 8 x 1.75 (203 X 45mm) semi-pneumatic tires
CUTTING WIDTH:
SCHV-18........................................................................... 18”
Width................................................................................. 23”
Length............................................................................... 59”
Height................................................................................ 35”
Wheel Base....................................................................... 22”
WEIGHT
Dry Weights
SCHV-18/5.5............................................................ 331* Ibs.
SCHV-18/8............................................................... 355* Ibs.
* Add 12 Ibs. to each above weight for CE Guards
18
SECTION TITLE
Schiller Grounds Care, Inc.
1028 Street Road • Southampton, PA 18966
Telephone: 1-800-366-6268
TWO YEAR LIMITED WARRANTY
Effective April 1, 2007
For the period of two years from the date of purchase, SCHILLER GROUNDS CARE, INC. will repair or
replace for the original purchaser free of charge, any part or parts found upon the examination of our factory
authorized service station, or by the factory in Norfolk, Nebraska, to be defective in material or workmanship. All
transportation charges on parts submitted for repair or replacement under this warranty shall be borne by the
purchaser.
This warranty does not include engines or engine parts, tires, batteries, or gearboxes that are covered under
separate warranties furnished by their manufacturer or supplier, nor does it include normal maintenance parts,
including but not limited to, spark plugs, points, filters, blades, and lubricants.
All service under this warranty will be furnished or performed by our factory authorized service stations.
There is no other expressed warranty. Implied warranties, including those of merchantability and fitness for a
particular purpose, are limited to two years from the date of purchase and to the extent permitted by law, any
and all implied warranties are excluded. The above remedy of repair and replacement of defective parts is
the purchaser’s exclusive remedy for any defect, malfunction or breach of warranty. Liability for incidental or
consequential damages under any and all warranties is excluded to the extent permitted by law.
NORMAL RESPONSIBILITIES OF THE SELLER AND THE USER
1.The Distributor or Dealer is responsible for the proper assembly and preparation of the product for
delivery to the end user.
2. The User is responsible for reading the Manual and Instructions.
3. The User is responsible for proper operation and maintenance as described in the manual.
4. The User is responsible for the replacement of wear items such as blades, belts, tires, batteries, etc.
5. The User is responsible for damage due to improper operation and maintenance, as well as abuse.
All claims must be received by the factory 30 days after the end of the warranty period to receive warranty consideration.
© 2010 Schiller Grounds Care, Inc. All Rights Reserved.
02/11
19
See the complete line of Turf Care Products
from
COMPACT AERATORS
CA-18H
CA-18B
STAND ON AERATOR
SA-25
SPLIT DRIVE AERATORS
TA-25D
TA-17D
TURF AERATORS
TA-19D
TA-19B
TA-26D
RECIPROCATING AERATORS
TURF SEEDERS
TS-20H
TS-20B
TSS-20H
TSS-20B
TRAILERS
AST
TURF RAKES
TR-20H
TR-20B
TRS-20H
TRS-20B
TR-20RH
TR-20RB
RA-21H
RA-21B
RAS-21H
RAS-21B
SOD CUTTERS
TOW/3PT AERATORS
HYDRO-DRIVE SOD CUTTERS
48RT
60RT
SC-18/5.5
SC-18/8.0
SCHV-18/5.5
SCHV-18/8.0
Classen reserves the right to make changes or add improvements to its products at any time without incurring any obligation to make
such changes to products manufactured previously. Classen, or its distributors and dealers, accept no responsibility for variations
which may be evident in the actual specifications of its products and the statements and descriptions contained in this publication.
© 2007 Schiller Grounds Care, Inc.
02/2011
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement