281

281
DB14 Range - SPEAKERS - Up to 15 Watts
Harsh Industrial & Marine Environments
Features
ᔢ IP66 and IP67.
ᔢ Temperature range: –55°C to +70°C.
ᔢ Corrosion resistant GRP.
ᔢ 117dBA at 15 watts at 1 metre.
ᔢ 100V line transformer.
ᔢ Power tappings, via integral transformer.
ᔢ Addressable capability.
ᔢ Stainless steel ratcheted mounting bracket.
ᔢ Earth continuity available.
ᔢ BS5839 part 8 compliant version available.
Introduction
This range of loudspeakers has a power rating of 15 Watts and is suitable
for use in demanding environments where a robust construction and high
ingress protection rating is required.
The body is manufactured completely from a UV stable glass reinforced
polyester which is also highly flame retardant and impact resistant. Stainless
steel screws are incorporated thus ensuring a corrosion free product.
MEDC can also provide a range of speakers suitable for use in potentially
explosive atmospheres.
For more information please contact Cooper MEDC.
Authorized Distributor:
GasDetectorsUSA.com
Houston, TX USA
832-615-3588
sales@GasDetectorsUSA.com
6DS106/F
Specification
Material:
Body & horn in UV stable, glass reinforced polyester.
Swivel bracket in stainless steel.
Cover screws in stainless steel.
Finish:
Painted to customer's specification.
Rated Power:
15 watts RMS continuous (at 25°C).
Certified Temp:
–55°C to +70°C.
Weight:
2.6kg approx. dependent on model.
Ingress Protection:
IP66 & IP67.
MOUNTING HOLE
Ø13±1
MOUNTING STIRRUP
30±1
30°±1°
Ø163±3
Ø123±3
30°±1°
30±1
Entries:
2 x M20 ISO.
Terminals:
Up to 8 x 2.5mm2. Other terminal arrangements available on request.
Output:
Maximum output at 1W/1m at 900Hz is 107 dBA.
Maximum output at 15W/1m at 900Hz is 117 dBA.
Frequency Range:
400Hz to 7kHz.
24±2
MOUNTING HOLES
Ø7±1
2 OFF POS.
245±3
Voice Coil Impedence: 8 ohms.
ALL DIMENSIONS IN MILLIMETRES
Mounting:
Via stirrup with ratchet facility.
Earth Continuity:
Available.
Labels:
Duty and tag labels optional.
Transformer:
Used to vary the rated power by selecting different tappings
(see table below).
Frequency Response @ 1W/1M for 15W Unit (1/3 Octave Pink Noise)
110
100
6
Transformer
Tappings
1:2
2:3
3:4
1:3
2:4
1:4
8Ω
1
2
3
4
Power
W
15.0
7.5
5.0
4.0
2.0
0.8
90
SPL (dB)
5
80
70
60
50
250
500
1000
2000
4000
8000
Frequency, Hz
Transformer Options:
Standard:
i)
ii)
Standard Tapping: Loop in/Loop out (4 x 2) terminal tap
change (8 terminals).
Optional Tapping: 4 terminal tap change with 2 terminals (5 &
6), directly connected to driver (8 ohms).
340 350 0
330
-5
320
-10
310
-15
300
290
280
270
0
10 20
30
40
50
60
-20
-25
-30
-35
-40
70
80
90
260
250
110
240
230
220
210
200 190
Ordering Requirements
DB14 15W @ 1kHz
100
120
180
130
140
150
170 160
The following code is designed to help in selection of the correct unit. Build up the reference number by inserting the code for each
component into the appropriate box. Standard products available ex-stock. Please visit www.coopermedc.com for further details.
Model
Option
Transformer
Finish
DB14
Transformer
Yes
None
Code
X*
N
* Standard 100V
Other voltages available, specify
voltage.
Option
Duty label
Tag label
Earth continuity
BS5839, part 8
compliant
Blanking Plug
None
Code
D*
T*
E
PT8
Finish
Painted Grey
Red
Special
Code
G
R
S*
*Please specify
P
N
* Please specify wording
All the above specifications, dimensions, weights and tolerances are nominal (typical) and Cooper MEDC reserve the right to vary all data without prior notice. No liability is accepted for any consequence of use.
02/12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising