Commercial Products
FRANKE
COMMERCIAL
2012
MISSION OF FRANKE WASHROOM SYSTEMS
Franke Washroom Systems is a world leading provider of intelligent washroom solutions to the
public, semi-public and commercial sector. We continually raise our capability and performance in
reliability, service, innovation and know how, enabling our professional customers to set benchmarks
of their own. We are expert partners, dedicated to create complete washroom systems that outshine
the rest in functionality, design and durability.
Clients
Projects
Willbond
Barlow Group
Ashcroft School, Luton
Sandwell College, West Bromwich
Balfour Beatty
JT Ellis
Cromwell Hospital, London
Silverstone Campsite
Wolseley Group
Travis Perkins
Four Seasons Shopping Centre, Mansfield
Southport Market
Skanska
Co-operative Group
HMP Featherstone, Wolverhampton
St Helens Stadium
NG Bailey
Grafton
Hopwood Hall College, Rochdale
Staythorpe Power Station, Nottinghamshire
Mitie Group
Workspace Design
Royal Commonwealth Pool
Taunton Church
NHS Trusts
Crosslings Group
Royal Victoria, Western General Hospital, Edinburgh
Thomas Clarkson Community College, Wisbech
Jewsons
Ryton Park Primary School, Worksop
Franke products are covered in part or wholly by the following Approvals and Standards:
001
ISO9001:2000
Franke Sissons Ltd, Carrwood Road, Sheepbridge, Chesterfield S41 9QB, England
Tel +44 (0)1246 450255, Fax +44 (0)1246 451276, Email ws-info.uk@franke.com, www.franke-sissons.co.uk, www.franke-ws.com
COMMERCIAL
Franke Sissons’ extensive range of commercial equipment
has been designed to meet the needs of today’s leading
catering establishments. Emergency rooms, Operating
Theatres, Nursing Homes and Doctor’s surgeries.
PRODUCT FEATURES
– Wide range of catering sinks to suit all commercial kitchens
– Preparation tables with retro-fit drawers
– Small and large inset sink bowls
– Food waste disposal units for environmentally friendly hygienic disposal
of food waste
–D
urable and easy to clean stainless steel trolleys
– Special fabrication products made to complement standard products
MINI RANGE 600mm WIDE
IMAGE
TYPE/MODEL
ITEM NUMBER
Mini catering sinks 600mm wide - single bowl
Mini sinks are manufactured from 1.2mm thick austenitic grade stainless steel
polished to a satin finish. Single bowl sinks are all supplied with 38mm waste,
plug, chain and overflow. Single bowl sinks have two holes drilled at 180mm
centres suitable for either 13mm pillar taps or mixer taps. An earthing lug is
fitted under the drainer. Stainless steel underframes complete with shelf are
supplied in a flat pack form with easy to read assembly instructions. Each leg is
fitted with an adjustable foot (-20/+10mm) with a working height of 900mm.
External: 1000x600mm, bowl: 400x400x250mm, single drainer E20601L/R
Stand and shelf
K20670N
External: 1200x600mm, bowl: 500x400x250mm, single drainer E20602L/R
External: 1200x600mm, bowl: 500x400x300mm, single drainer E20603L/R
Stand and shelf
K20671N
E20602L
External: 1500x600mm bowl: 500x400x300mm double drainer
Stand and shelf
E20604N
K20672N
L or R after the code number refers to the handing of the drainer.
ie. left or right when facing the unit.
Extras:
13mm crosshead high neck pillar taps
13mm fluted handle high neck pillar taps
13mm deck pattern mixer tap
F1081
F1083
F1026
Spares:
Black plastic foot
38mm waste, plug, chain and overflow
B1423
F2119
Mini catering sinks 600mm wide - double bowl
Mini sinks are manufactured from 1.2mm thick austenitic grade stainless steel
polished to a satin finish. E20605 and E20606 have the larger bowl fitted with
a 38mm waste, plug, chain and overflow and the smaller outer bowl supplied
with a 38mm basket strainer waste outlet. Models E20605L/R and
E20606L/R are both drilled for mixer taps only - see illustrations opposite.
An earthing lug is fitted under the drainer. Stainless steel underframes
complete with shelf are supplied in a flat pack form with easy to read assembly
instructions. Each leg is fitted with an adjustable foot (-20/+10mm) with a
working height of 900mm.
E20605R
External: 1500x600mm, bowls: 500x400x250mm
and 400x400x250mm, single drainer
E20605L/R
External: 1500x600mm, bowls: 500x400x300mm and
400x400x250mm, single drainer
Stand and shelf
E20606L/R
K20672N
L or R after the code number refers to the handing of the drainer.
ie. left or right when facing the unit.
E20605L & E20606L
Typical end elevation
Section through all models
Extras:
13mm deck pattern mixer tap
F1026
Spares:
Black plastic foot
38mm waste, plug, chain and overflow
B1423
F2119
MIDI RANGE 650mm WIDE
IMAGE
TYPE/MODEL
ITEM NUMBER
Midi catering sinks 650mm wide
Midi sinks are manufactured from 1.2mm thick austenitic grade stainless steel
polished to a satin finish. All sinks have two tapholes behind each bowl drilled
at 180mm centres. Single bowl sinks are suitable for either 13mm pillar taps or
mixer taps whereas the double bowl sinks are only suitable for pillar taps.
Bowls are all supplied with 38mm waste and standpipe strainer overflow. An
earthing lug is fitted under the drainer. Stainless steel underframes complete
with shelf are supplied in a flat pack form with easy to read assembly
instructions. Each leg is fitted with an adjustable foot (-20/+10mm) with a
working height of 900mm.
E20614D
E20608N
E20610L
External: 750x650mm bowl: 610x460x300mm single bowl
Stand and shelf
E20608N
K20674N
External: 1200x650mm bowl: 610x460x300mm,
single bowl, single drainer
Stand and shelf
E20610L/R
K20671N
External: 1500x650mm bowl: 610x460x300mm,
single bowl, single drainer
Stand and shelf
E20612L/R
K20672N
External: 1800x650mm bowl: 610x460x300mm,
single bowl, double drainer
Stand and shelf
E20614D
K20673N
External: 1800x650mm bowls: 610x460x300mm,
double bowl, single drainer
Stand and shelf
E20616L/R
K20673N
External: 2400x650mm bowls: 610x460x300mm,
double bowl, double drainer
E20618D
Stand and shelf. Note: This underframe incorporates 6 legs
K20684N
L or R after the code number refers to the handing of the drainer
ie. left or right when facing the unit.
E20612L
E20614D
E20616L
E20618D
Extras:
13mm crosshead high neck pillar taps
13mm fluted handle high neck pillar taps
13mm deck pattern mixer tap
F1081
F1083
F1026
Spares:
Black plastic foot
Stainless steel standpipe strainer for 300mm deep bowls
B1423
F2132
MAGNUM RANGE 700mm WIDE
IMAGE
TYPE/MODEL
ITEM NUMBER
Magnum catering sinks 700mm wide with 610x460mm bowl
Magnum sinks are manufactured from 1.2mm thick austenitic grade stainless
steel polished to a satin finish. Bowls are all supplied with 38mm waste and
standpipe strainer overflow. All sinks have two tapholes behind each bowl
drilled at 180mm centres. Single bowl sinks are suitable for either 13mm pillar
taps or mixer taps whereas the double bowl sinks are only suitable for pillar
taps. An earthing lug is fitted under the drainer. Stainless steel underframes
complete with shelf are supplied in a flat pack form with easy to read assembly
instructions. Each leg is fitted with an adjustable foot (-20/+10mm) with a
working height of 900mm.
E20626R
E20642L
External: 1200x700mm, bowl: 610x460x300mm,
single bowl, single drainer
stand and shelf
E20642L/R
K20671N
External: 1500x700mm, bowl: 610x460x300mm,
single bowl, single drainer
stand and shelf
E20622L/R
K20672N
External: 1800x700mm, bowl: 610x460x300mm,
single bowl, double drainer
stand and shelf
E20624D
K20673N
External: 1800x700mm, bowls: 610x460x300mm,
double bowl, single drainer
stand and shelf
External: 2400x700mm, bowls: 610x460x300mm,
double bowl, double drainer
Stand and shelf. Note: This underframe incorporates 6 legs
E20622L
E20626L/R
K20673N
E20628D
K20684N
L or R after the code number refers to the handing of the drainer.
ie. left or right when facing the unit.
E20624D
E20626L
E20628D
Section through all models
Typical end elevation
Extras:
13mm crosshead high neck pillar taps
13mm fluted handle high neck pillar taps
F1081
F1083
Spares:
Black plastic foot
Stainless steel standpipe strainer for 300mm deep bowls
B1423
F2132
MAGNUM RANGE 700mm WIDE
IMAGE
TYPE/MODEL
ITEM NUMBER
Magnum catering sinks 700mm wide with 760x510mm bowl
Magnum sinks are manufactured from 1.2mm thick austenitic grade stainless
steel polished to a satin finish. All sinks have two tapholes behind each bowl
drilled at 180mm centres. 19mm pillar taps are required to provide sufficient
flow of water for the large sink bowls. Bowls are all supplied with 38mm waste
and standpipe strainer overflow. An earthing lug is fitted under the drainer.
Stainless steel underframes complete with shelf are supplied in a flat pack
form with easy to read assembly instructions. Each leg is fitted with an
adjustable foot (-20/+10mm) with a working height of 900mm.
E20637R
External: 1500x700mm, bowl: 760x510x380mm,
single bowl, single drainer
stand and shelf
E20631L/R
K20672N
External: 1800x700mm, bowl: 760x510x380mm,
single bowl, double drainer
stand and shelf
E20634D
K20673N
External: 2400x700mm, bowls: 760x510x380mm,
double bowl, single drainer
Typical end elevation
Section through all models
E20637L/R
Stand and shelf. Note: This underframe incorporates 6 legs
K20680N
External: 3000x700mm, bowls: 760x510x380mm,
double bowl, double drainer
E20640D
Stand and shelf. Note: This underframe incorporates 6 legs
K20685N
L or R after the code number refers to the handing of the drainer.
ie. left or right when facing the unit.
E20631L
Extras:
19mm crosshead high neck pillar taps
Spares:
Black plastic foot
Stainless steel standpipe strainer for 380mm deep bowls
F1035/6
B1423
F2133
E20634D
E20637L
E20640D
Spares for catering sinks
Stainless steel standpipe strainer for 300mm (12") deep bowls
Stainless steel standpipe strainer for 380mm (15") deep bowls
Black plastic adjustable foot
Crumb Strainer waste for E20605
50mm leg extender
F2132
F2133
B1423
F2080
B1091
PREPERATION WALL TABLES
IMAGE
TYPE/MODEL
ITEM NUMBER
Preparation wall tables 600, 650 and 700mm wide
Mini wall tables will align with the Mini range of catering sinks. Mini wall tables
are manufactured from 1.2mm thick austenitic grade stainless steel polished to
a satin finish. Stainless steel underframes complete with shelf are supplied with
each table, in a flat pack form with easy to read assembly instructions. Each
leg is fitted with an adjustable foot (-20/+10mm) with a working height of
900mm.
Mini wall table 600mm wide with stand and shelf
F20601Z
600x600mm
F20619Z
900x600mm
F20600Z
1200x600mm
F20601Z
1500x600mm
F20602Z
1800x600mm
F20603Z
Midi wall table 650mm wide with stand and shelf
F20619Z/F20620Z
Typical end elevation 600mm
600x650mm
F20620Z
900x650mm
F20604Z
1200x650mm
F20605Z
1500x650mm
F20606Z
1800x650mm
F20607Z
Magnum wall table 700mm wide with stand and shelf
F20600Z/F20604Z/
F20608Z
Typical end elevation 650mm
Typical end elevation 700mm
F20603Z/F20607Z/
F20611Z
F20608Z
1200x700mm
F20609Z
1500x700mm
F20610Z
1800x700mm
F20611Z
Extras:
Stainless steel drawer 380x470x125mm for
all models except F20619/20N
F25171N
Stainless steel drawer with lock 380x470x125mm for
all models except F20619/20N
F25173N
Note: Drawers can not be fitted to tables shorter than 900mm in length
F20601Z/F20605Z/
F20609Z
F20602Z/F20606Z/
F20610Z
900x700mm
CENTRE AND SPECIAL LENGTH TABLES
IMAGE
TYPE/MODEL
ITEM NUMBER
Centre tables and special length tables
Four lengths of centre tables, all 650mm wide compliment the standard wall
tables. All the tables are manufactured from 1.2mm thick austenitic grade
stainless steel polished to a satin finish. Stainless steel underframes complete
with shelf are supplied with each table, in a flat pack form with easy to read
assembly instructions. Each leg is fitted with an adjustable foot (-20/+10mm)
with a working height of 900mm.
Stand and shelf
F20612Z
F20613Z
F20614Z
F20615Z
Centre table end elevation
900x650mm
F20612Z
1200x650mm
F20613Z
1500x650mm
F20614Z
1800x650mm
F20615Z
Extras:
Stainless steel drawer for all models
380x470x125mm
Stainless steel drawer with lock for all models
380x470x125mm
F25171N
F25173N
WALL AND MICROWAVE SHELVES
IMAGE
TYPE/MODEL
ITEM NUMBER
Wall shelves
Manufactured from 1.2mm thick grade 1.4016 (430) stainless steel polished to
a satin finish. All the shelves have integral triangular shaped wall brackets at
each end. The brackets incorporate 2 fixing holes and together with the fixing
holes provided in the upstand make for a strong and durable fastening to the
wall. (Screws and plugs are not supplied). Ensure that the correct fixings are
used to suit the type of wall. Additional loose fitting brackets are supplied for
extra strength.
F10512N
Stainless steel, brackets: 2, max load: 25kg
Front elevation
F10511N
600x300mm
F10511N
900x300mm
F10512N
Stainless steel, brackets: 3, max load: 50kg
F10512N
Section
1200x300mm
F10513N
1500x300mm
F10514N
Stainless steel, brackets: 4, max load: 75kg
1800x300mm
F10513N
F10515N
F10514N
F10515N
Microwave shelf
Manufactured from 1.2mm thick grade EN 1.4301 (304) stainless steel
polished to a satin finish. Two triangular wall brackets are supplied with each
shelf, which fasten to the shelf using two nuts and bolts supplied. Once the
brackets are attached they are then screwed to the wall using the correct
screws and plugs to suit the type of wall (screws and plugs are not supplied).
The shelf can either be supported from underneath or alternatively hung from
the brackets, depending upon the installation and size of the microwave. The
brackets can also be positioned so that a 20mm gap at the rear can be left for
the passage of cables. Fixing instructions are provided with each shelf.
F10510N
Stainless steel, brackets: 2, max load: 25kg
600x500mm
Upturned brackets
Brackets underneath
Plan
Front
elevation
End
elevations
F10510N
WHIRL-A-WASTE FOOD DISPOSAL UNIT
IMAGE
TYPE/MODEL
ITEM NUMBER
Choosing the size of food waste disposal unit
The waste disposal capacity chart provides an important guideline to the size of
motor required by detailing rates of disposal, appropriate volume of meals per day
and type of food to be disposed of (i.e. high % of bones) and any situation where an
abnormally high volume of waste is required for disposal.
Economy model with direct
mains water connection
CODE
In both these cases it is recommended that a larger machine is considered. The
motor grinder is able to dispose of most types of food waste including meat waste
and bones, fish scales and skins, bacon rind, vegetable leaves and cuttings, plate
waste and liquids. The volume of waste effectively disposed of is governed by the
size of the motor. The machines are unable to cope with wire, metal, string, cloth,
plastics and foil as these materials jam up the grinding mechanisms.
Sink fitting model
LOCATION
MOTOR (HP)
RATING
ELECTRICAL
PHASE
UNIT SIZE (lxwxh)
WASTE DISPOSAL CAPACITY
(kg/hr)
(covers/day)
TYPE OF WASTE
SD280
Sink fitting
.50hp
.780kW
1ph
178x178x320mm
60
125
Plate waste, left
SD301
H50751S
H50753S
H50751E
H50751H
H60751E
H50753H
H50753E
H60753E
Sink fitting
Sink fitting
Sink fitting
Free standing
Welding into tabling
Free standing
Welding into tabling
Free standing
Free standing
.75hp
.75hp
.75hp
.75hp
.75hp
.75hp
.75hp
.75hp
.75hp
0.5kW
0.5kW
0.5kW
0.5kW
0.5kW
0.5kW
0.5kW
0.5kW
0.5kW
1ph
1ph
3ph
1ph
1ph
1ph
3ph
3ph
3ph
178x178x320mm
318x318x508mm
318x318x508mm
500x600x850mm
520x520x690mm
500x600x850mm
520x520x690mm
500x600x850mm
520x520x690mm
85
100
100
200
200
200
200
200
200
175
200
200
400
400
400
400
400
400
Plate waste, left
overs, vegetables
and peelings, very
fine chicken bones
Note: The specifications listed above also apply to the mains water supply models prefixed with the code H6751E.
Electrical features
The safety guard fitted to non sink fitting machines ensures that the motor will not work if the guard is not secured in position. All internal electrical controls
are IP65 rated to prevent the risk of electric shock from the switches.
Installation
Full installation instructions are supplied with the product. No internal electrical or water connections are required by the installer. Water, electrical and waste
connections should be carried out by a suitably qualified person.
SINK FITTING MODELS
Nominal meals 150 per day (0.5hp)
capacity
200 per day (0.75hp)
Nom capacity
75kg/hr (0.5hp), 100kg/hr (0.75hp)
.75HP MACHINES
400 per day
200kg/hr
Motor voltages 0.50hp 1ph .375kW, 0.75hp 1ph 0.55kW
240v 1ph 50hz, 415v 3ph 50hz
1ph .55kW, 3hp 0.55kW
240v 1ph 50hz, 415v 3ph 50hz
Motor control
Wall mounted, non reversing starter with waterproof start and stop
buttons. Manual reset.
Reversing motor with waterproof start and stop buttons. Automatic
reset and overload.
Fuse rating
240v 1ph 50hz 0.50hp-13 amps
Full load current 4.5 amps 0.75hp-25amps.
Full load current 5.6 amps 415v 3ph 50hz 10 amps.
Full load current 1.6 amps.
Recommended fuse links for Type 2 co-ordination as listed by the
motor control gear manufacturer (BS 88 Type T)
240v 1ph 50hz
25 amps Full load current 5.6 amps 415v 3ph 50hz
10 amps. Full load current 1.6 amps.
Recommended fuse links for Type 2 co-ordination as listed by the
motor control gear manufacturer (BS 88 Type T)
Water
connection
Cold supply from sink taps. Recommended flow rate 9 litres per
minute. Water regulations.
Cold supply to 15mm pipe connector. Fit stop cock adjacent to
machine. To satisfy UK water regulations. Machines starting with
an H5 code should not be fitted to the rising water mains. However
machines starting with an H6 code are an H6 code are designed
to be fitted to the rising mains. Automatic solenoid valve operated.
Recommended flow rate 12 litres per minute. Inlet pressure to be
minimum of 0.3 bar.
Waste
connection
38mm BSP outlet bend 50mm male for connection to waste pipe
with U, P or S trap (not bottle trap). Avoid grease traps. Increase
pipe size after trap if possible. Fall on pipe to a minimum of 1 in 7.
38mm BSP outlet bend 50mm male for connection to waste pipe
with U, P or S trap (not bottle trap). Avoid grease traps. Increase
pipe size after trap if possible. Fall on pipe to a minimum of 1 in 7.
Motor
construction
NEMA ULCSA
NEMA ULCSA
FOOD WASTE DISPOSAL UNITS
IMAGE
TYPE/MODEL
ITEM NUMBER
Light duty sink fitting waste disposal units
Disposal units designed to be installed into catering sinks with a 89mm waste
outlet. Suitable for installation in cafes, pubs and restaurants serving less than
175 meals per day. The durable units will dispose of plate waste, vegetables
and peelings, fine fish and chicken bones.
0.5hp 780W 1phase sink fitting light duty waste disposal unit with
wall mounted starter. IP rating: IP20.
SD280
0.75hp 1300W 1phase sink fitting light duty waste disposal unit with
wall mounted starter. IP rating: IP20.
SD301
Sink fitting waste disposal units
The sink fitting waste disposal units are designed to fit into an 89mm waste
outlet. The motor is activated using the wall mounted control box supplied.
For planning chart and all technical details relating to these product see
previous page.
0.75hp Sink fitting waste disposal unit, single phase
0.75hp Sink fitting waste disposal unit, 3 phase
H50751S
Wall Mounted
Control Box
H50751S
H50753S
Front elevation
Inset Hopper Waste Disposal Units
Inset hopper models are suitable for welding into dishwash tabling and are
available with a 0.75hp motor. They can also be fitted to give either front, left
or right hand side feed, depending on the size of tabling. The hopper and motor
are supplied separately for assembly on site. A magnetic cutlery saver is fitted
as standard. The motor is activated by using the front control buttons but a
remote wall mounted control box can be supplied as an extra. For planning
chart and all technical details relating to this product see previous page.
H50751H
0.75hp Inset hopper waste disposal unit, 1 phase
H50751H
0.75hp Inset hopper waste disposal unit, 3 phase
H50753H
FOOD WASTE DISPOSAL UNITS
IMAGE
TYPE/MODEL
ITEM NUMBER
Economy waste disposal units
Plan
H50751E
Front elevation
Economy models are ideal for fitting between tabling and sinks as a free
standing unit. Therefore they can be used for several purposes ie. plate waste
and food preparation. Each unit is supported on four stainless steel legs which
have adjustable feet. The unit is wired up and ready for connection to an
isolator (not supplied). Models prefixed with H5 are tank fed, whereas models
prefixed with H6 can be fed directly from the mains water supply. For planning
chart and all technical details relating to this product see previous page.
0.75hp Economy waste disposal unit, 1 phase
0.75hp Economy waste disposal unit, 3 phase
H50751E
H50753E
0.75hp Economy waste disposal unit, 1 phase with swan neck,
for connecting to the mains water supply.
H60751E
0.75hp Economy waste disposal unit, 3 phase with swan neck,
for connecting to the mains water supply.
H60753E
End elevation
Extras & Spares for Whirl-A-Waste
Replacement motors: 0.5hp 1 ph motor (light use)
Replacement motors: 0.75hp 1ph motor (light use)
Replacement motors: Waw motor grinder 0.75hp 1 phase
Replacement motors: Waw motor grinder 0.75hp 3 phase
Pry bar for Whirl-A-Waste units
SD280M
SD301M
B2085
B2087
F1011
CROMFORD STAINLESS STEEL TROLLEYS
IMAGE
TYPE/MODEL
ITEM NUMBER
Cromford trolleys
A range of three different sized stainless steel trolleys, all with three tray
variants to suit all sizes of catering situations. The tubular frame is made from
25mm dia. stainless steel and incorporates pressed trays which are both
hygienic and easy to clean. Each leg is fitted with 125mm dia. castors.
Small Cromford trolley with three trays
600x400x930mm
7051305
Medium Cromford trolley with three trays
850x450x930mm
7051302, 7051305 and 7051307
Large Cromford trolley with three trays
1000x550x930mm
Front
elevation
7051302
7051307
End elevation
Plan
Small Cromford Trolley 7051305
Front
elevation
End elevation
Plan
Medium Cromford Trolley 7051302
Plan
Front
elevation
End
elevation
Large Cromford Trolley 7051307
Extras and spares for trolleys and racks
B7012
125mm braked castor
B7011
125mm castor
125mm castor for clearing trolleys
B7011
125mm braked castor for clearing trolleys
B7012
SPECIAL PRODUCTS AND SITE SERVICES
Special products
Franke have provided a large number of special products that are either
variations on standard products by length/width or are complimentary to
the standard product such as inset sinks for laboratories with large bowls,
for example. The large amount of experience and the inherent flexibility of
stainless steel as a material enables Franke to offer a level of expertise in the
design, manufacture and project management.
The range of special products available include:
•
•
•
•
Hospital and Laboratory sinks and worktops
Multiple washbasins and washtroughs for factories
Slab Urinals for stadium and nightclub projects
Vacuum WCs and Urinals for ships, trains and aircraft
Site services
Franke are able to provide a range of site services to maintain, repair and
refurbish stainless steel products. Utilising skilled and experienced fabricators
we are able to deliver a service that can be provided at a reasonable cost
to the client. This service does not include initial installation of the product.
Enquiry to Franke Customer Service Department for further details.
Spare parts
Franke offers a comprehensive spare part service for all products from
replacement keys to security screws.
Enquire to Franke Customer Service Department for further details.
Franke Sissons Ltd
Carrwood Road
Sheepbridge
Chesterfield S41 9QB
England
Tel +44 (0)1246 450255
Fax +44 (0)1246 451276
Email: ws-info.uk@franke.com
Web: www.franke-ws.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising