Grande™ Exit Series

Grande™ Exit Series
GRANDE
TM
EXIT SERIES
Specification-grade, LED, Thermoplastic, Snap Together Exit Sign
FEATURES
SPECIFICATIONS
Construction
•Frame, faceplate, backplate and canopy are made of Thermoplastic
•6 inch EXIT lettering legend, available in Red or Green
Supply and Install Lightalarms® Grande™ Exit Series.
The Exit Sign specified as a universal model includes (2) faceplates, (1) backplate
and (1) canopy, specified as single face includes (1) faceplate, (1) backplate and
(1) canopy, specified as double face includes (2) faceplates and (1) canopy. The
frame, faceplate, backplate and canopy shall be constructed of injection-molded
Thermoplastic. Frame, backplate and canopy shall be matching in color, (W)
white or (B) black. Faceplate shall be (W) white, (B) black or optional (A) brushed
aluminum with a (R) red or (G) green legend. Snap together design allows for
no screws being necessary to hold the faceplate(s) or backplate together. The
faceplate shall come standard with two field-selectable, removable snap-in/out
chevron indicators. The universal and single face Exit Sign shall be suitable for
surface mount, wall, end or ceiling installations. The double face Exit Sign shall be
suitable for surface mount, end or ceiling installations.
The illumination source shall be Light Emitting Diodes (LED) in (R) red or (G) green
color. The LEDs shall provide illumination in normal and emergency operation
mode. The LEDs shall be mounted inside the Exit Sign housing. A color matching
LED sensitive legend diffuser of (R) red or (G) green, shall be mounted in front of
the LEDs to provide the 6” high by ¾” stroke EXIT letters with even illumination
and no visible LEDs or hot spots.
Based on the test results, the authors estimate that ALINGAP LEDs exposed to
100,000 hours (11.4 years) of continuous use at an ambient temperature of
+55°C
AC-Only models shall be 120/277VAC, 60Hz, with a power consumption of less
than 2.5W.
AC/DC models shall be 120/277VAC, 60Hz, with a power consumption of less
then 2W and allows for DC operation from 6VDC to 48VDC.
Self-Powered models shall be 120/277VAC, 60Hz, with a power consumption of
less than 3.3W and supplied with a sealed maintenance-free Nickel-Cadmium
battery, providing at least 90 minutes, illumination upon AC failure.
When specified, the Self-Powered Exit Sign with Improved Diagnostics shall
include a self-test and silent diagnostic function, managed by a micro-controller;
it shall execute automatic tests for one minute every 30 days, 30 minutes every
60 days and 90 minutes annually. A diagnostic circuit shall continuously monitor
the performance of the battery, charger module and LED lamps. When a fault is
detected, the pilot light shall change color from green to red and flash with a
specific code. The red light is steady-on in case of a battery disconnect; it will
flash with one blink for battery failure; two blinks for charger failure and four
blinks for LED lamp failure. A label with the diagnostic legend shall be visible next
to the pilot light.
The Exit Sign shall be tested by Underwriters Laboratories, listed to UL 924
standards. UL listed for Damp location (50°F to 104°F, 10°C to 40°C). The Exit
Sign shall meet NFPA101 (Life Safety Code), NFPA 70-NEC and OSHA illumination
standards. Includes a five-year full warranty.
The Exit Sign shall be Lightalarms® Model _________________________.
Mounting
•Surface Mount
•Universal model includes (2) faceplates, (1) backplate and (1) canopy
•Single face model includes (1) faceplate, (1) backplate and (1) canopy
•Double face model includes (2) faceplates and (1) canopy
•Canopy included for end or ceiling mount applications
•Backplate features universal knockouts for a standard 4 inch junction box, used
in wall mount applications
Finishes
•Choice of finishes: white or black
•Optional brushed aluminum faceplate stencil available
Chevrons
•Faceplate includes two field-selectable, snap-in/out chevron indicators
LEDs
•Red or Green Long-Life Light Emitting Diodes (LED) illumination
Self-Diagnostics
•Self-Powered models available with or without Improved Diagnostics
•NEXUS® Wired or Wireless system compatible
Special Wording Panels
•Available. Contact your sales representative with your design requirements
Approvals
•Listed to UL 924 Standards
•UL listed for Damp location (50°F to 104°F, 10°C to 40°C)
•Meets NFPA101 (Life Safety Code), NFPA 70 NEC, OSHA illumination standards
Warranty
•Five-Year full warranty (subject to proper installation and maintenance)
ACCESSORIES
(Order as a separate item)
WG1-L
WG5-L
Wire Guard (Wall Mount)
Wire Guard (Ceiling Mount and End Mount)
POWER CONSUMPTION CHART
MODEL
AC SPECS
DC SPECS
AC-Only
120/277VAC, 60Hz
Less than 2.5W
–
AC / DC-remote
120/277VAC, 60Hz
Less than 2W
6 to 48VDC
Less than 1.5W
Self-Powered
120/277VAC, 60Hz
Less than 3.3W
Nickel-Cadmium
battery
Min. 90 minutes
Self-Powered
with Diagnostic
120/277VAC, 60Hz
Less than 2.8W
Nickel-Cadmium
battery
Min. 90 minutes
30
–
www.lightalarms.com
TYPE
Compact with an all-in-one, snap-fit
design. Easy to install and affordable.
Ideally suited for spec-grade
applications
CATALOG #
NOTES
DIMENSIONS
8” [20.82 cm]
9” [22.86 cm]
Dimensions are approximate and subject to change.
11-7/8” [30.16 cm]
12-7/8” [32.71 cm]
2”
[5.08 cm]
ORDERING FORMAT
SERIES
GRAN
UNIT TYPE
Standard Models
AC= AC-Only (120/277V )
DC= 120/277VAC & 6 to 48VDC
N= Self-Powered Nickel-Cadmium
Optional Models
21= Dual AC circuit (2x120V)
22= Dual AC circuit (2x277V)
ND= Self-Powered with Improved
Diagnostic circuitry
-NEX= Nexus® Wired1
-NEXRF= N
exus® Wireless1
LEGEND COLOR / # OF FACE
R= Red Universal
R1= Red single face
R2= Red double face
G= Green Universal
G1= Green single face
G2= Green double face
Open face1
RW= Red on White
GW= Green on White
Universal= (2) faceplates, (1) backplate and (1) canopy
Single Face= (1) faceplate, (1) backplate and (1) canopy
HOUSING
COLOR
W= White
B= Black
OPTIONS
-BA= Brushed Aluminum exit stencil
-FB= Flasher Buzzer (ND model only)
-FL= Flasher (ND model only)
-FAF= F ire Alarm activated Flasher
(AC, DC, 21,22 or ND models only)
-FBF= Flasher Buzzer + Fire Alarm activated
Flasher (ND model only)
-VR= Vandal Resistant Screws
-LVR1= Vandal Resistant Polycarbonate lens
and screws
-PM= Pendant Mount
For Pendant Kit see p. 51
Double Face= (2) faceplates and (1) canopy
1 Consult
your sales representative
1 Open
face required with special wording legends
EXAMPLE: GRANACRW
GRANDE™ THERMOPLASTIC FAMILY
The Grande™ Exit Sign is a part of the Grande™ family of Thermoplastic emergency lighting products. The Grande™ family offers complete emergency lighting solutions
where style and design are required in an economical package.
Grande™ Combination Series
p.32-33
Grande™ Battery Series
p.74-75
www.lightalarms.com
ELF640 (indoor) & ELF650 (outdoor) Remote Series
p.110-111
31
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising