she_SDI02-2_User_Manual
HDMI to SDI CONVERTER
Elpro Video Labs Ed.1 October 2013
ITEM NO.: SDI02
The device SDI02 converts a signal from HDMI to 3G/HD/SD-SDI which providing the highest quality
images for professional audio-visual end users. It is designed for high performance video process for
post-production and broadcast applications,
Features:
Support video signal 480i, 576i, 720p, 1080i, 1080p.
Incoming HDMI signal must be YUV 4:2:2 encoded
Support SDI (SMPTE 259M), HD-SDI (SMPTE 292M), 3G-SDI (SMPTE 424M).
Support audio LPCM 7.1 Channel.
Installation:
Panel View:
SDI02
Recommend Cable:
Maximun 10 m HDMI input cable is recommended. High Speed cable type is preferred.
High quality 75Ω Coaxial Cable is recommended. Low quality coaxial cable may cause
signal loss and affect transmission distance and reliability.
1
Working Distance output cable:
Max. distance via high quality 75Ω Coaxial Cable ( Belden 1694A Testing)
SD (480i, 576i) (270Mbps)
300 m (Note 1)
HD (720p, 1080i, 1080p 24/25/30Hz) (1.45Gbps)
200 m (Note 1)
Full HD (1080p 50/59.94 Hz) resolution (2.97Gbps)
100 m (Note 1)
Note 1: The distances above mentioned depend on the quality of the input circuitry of the SDI destination.
Therefore, some devices could not permit these cable length despite of the use of 1694A Belden cable.
LED Indication:
GREEN
ON
FLASH
Power & Signal
Power on
Not support HDMI input format
ON
OFF
SDI
SDI
SDI
BLUE
signal
signal output
signal output not present
Switch Instruction:
1
↑
↓
Video Support
Video Support
480i, 576i, 720p@50/59.94/60Hz, 1080i@50/59.94/60Hz.
480i, 576i, 720p@50/59.94/60Hz, 1080i@50/59.94/60Hz,
1080p@23.98/24/29.97/30/50/59.94/60Hz.
2
↑
↓
Audio Support
Audio Support
LPCM 2 Channels.
LPCM 8 Channels.
Trouble Shooting:
1. SDI signal not support HDMI 480p and 576p resolution.
2. SDI output resolution and frequency is same as HDMI input. If your SDI monitor not support HDMI
input resolution and frequency, then it won’t have picture at the monitor.
Specification:
ITEM NO.
SDI Standard / Protocol
Resolution
Audio
HDMI Output Connector
SDI Output Connector
Power Consumption
Power Supply
Temperature
Dimensions
Weight
SDI02
SDI (SMPTE 259M), HD-SDI (SMPTE 292M), 3G-SDI (SMPTE 424M)
NTSC (480i), PAL (576i),
720p@50/59.94/60Hz,
1080i@50/59.94/60Hz,
1080p@23.98/24/29.97/30/50/59.94/60Hz
LPCM 8 Channels, 48Khz, 16 / 20 / 24Bit
HDMI Type A
BNC 75Ω
850mA (Max)
Switching DC5V 2AMP
Operation: 0 to 55°, Storage: -20 to 85°, Humidity: up to 95%
67 x 110 x 27 (mm)
200 g
2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising