103M PDPS Datasheet
IEC 60870-5-103 Master to
PROFIBUS DP Slave Gateway
The ProLinx IEC60870-5-103 Master to PROFIBUS DP Slave
Gateway creates a powerful connection between devices on an IEC
103 network and PROFIBUS DP master devices. This stand-alone
DIN-rail mounted protocol gateway provides one PROFIBUS DP
Slave configurable DB9F port and one IEC 103 Master configurable
serial port.
IEC 60870-5-103 Master to
PROFIBUS DP Slave Gateway
The 103M-PDPS modules are the ideal solution for the
many applications where IEC 103 Master connectivity
can be used to integrate a PROFIBUS DP master device
into a system. The IEC60870-5-103 Master gateway is a
powerful module designed with Master support, enabling
easy connection to other IEC 103 slave devices. In
combination with the PROFIBUS DP Slave support, the
module provides a very powerful interface to the many
PROFIBUS master devices which are in use in the
industrial marketplace today. Applications for the module
are found in most industries, especially Manufacturing,
Oil and Gas, Electrical Power and Food Processing.
The IEC 60870-5-103 Master protocol driver works as a master to
monitor and control up to 16 slaves. The serial port is userconfigurable, providing a very powerful and flexible host or device
interface solution.
The PROFIBUS DP Slave protocol driver supports the PROFIBUS
V0 Slave implementation, providing powerful data transfer capability
between the ProLinx module and Siemens PLCs or other hosts. User
configurable data mapping and DP port operation make the interface
an easy to use and powerful data transfer tool.
IEC 60870-5-103 Master
The IEC 60870-5-103 Master driver provides extensive support for
Master implementations of the protocol. The serial port on the
gateway is user-configurable to support the IEC protocol (Master,
Error Checking, Baud rate, etc).
The module supports:
How to Contact Us: Sales and Support
All ProSoft Technology® products are backed with
unlimited technical support. Contact our worldwide
Technical Support team directly by phone or email:
Asia Pacific
+603.7724.2080, asiapc@prosoft-technology.com
Languages spoken include: Chinese, Japanese, English
Europe – Middle East – Africa
+33 (0), support.EMEA@prosofttechnology.com
Languages spoken include: French, English
North America
+1.661.716.5100, support@prosoft-technology.com
Languages spoken include: English, Spanish
Latin America (Sales only)
+, latinam@prosoft-technology.com
Languages spoken include: Spanish, English
+55-11.5084.5178, eduardo@prosoft-technology.com
Languages spoken include: Portuguese, English
16 slaves (sessions with distinct Data Link Addresses)
Each slave (session) supports up to 3 sectors (with distinct
Common ASDU Addresses)
Configurable Time Sync and General Interrogation messages
during initialization
Supports General Interrogation, General Command and Time
Synchronization Commands.
General Parameters
Communication parameters
Baud Rate: 110 to 19200 baud
Stop Bits: 1 or 2
Data Size: 5 or 8 bits
Parity: None, Even, Odd
RTS Timing delays: 0 to 65535 ms
IEC 60870-5-103 Master
Configurable Parameters
Baud Rate
Minimum Delay
Receive Timeout
Data Link Address
Common ASDU Address
The PROFIBUS DP Slave driver gives access to the ProLinx unit's
internal database via 244 bytes of Input data and 244 bytes of Output
data (maximum 400 bytes total). These Input and Output data blocks
are mapped by the user within the ProLinx module's data memory
allowing the user maximum flexibility and data transfer with other
Configuration Serial Port
DB-9M RS-232 only
No hardware handshaking
RJ45 Connector
Link and Activity LED indicators
RS-232 handshaking configurable
RS-422/485 screw termination included
2500V RMS port signal isolation per UL
3000V DC min. port to ground and port to
logic power isolation
Mini-DIN to DB-9M serial cables
4 ft RS-232 configuration cable
2.5mm screwdriver
CD (docs and Configuration utility)
RS-422/485 DB-9 to Screw Terminal
Adaptor (1 or 4, depending on ports)
Ethernet Port (Ethernet
modules only)
Application Serial Ports
General Parameters
GSD File
Downloadable from ProSoft Technology
web site
Serial Port Isolation
Baud Rate: 9.6 kbit/s – 12 Mbit/s
244 bytes Input data
244 bytes Output data
400 bytes total
PROFIBUS V0 Slave using Siemens SPC3
Freeze Mode
Sync Mode
Auto Baud Setting
PROFIBUS Node Address: 1 to 125
Data byte swapping
Action on loss of PROFIBUS connection
Comm Fail Timeout Multiplier
Status Data location in Internal Database
Shipped with Each Unit
PROFIBUS Specifications
Communication parameters
Supported I/O length
Configurable Parameters
General Specifications
The ProLinx Communication Modules provide connectivity for two or
more dissimilar network types. The modules, encased in sturdy
extruded aluminum, are stand-alone DIN-rail mounted protocol
gateways, providing communication between many of the most
widely used protocols in industrial automation today.
Hardware Specifications
Power Supply
24 VDC nominal
18 to 36 VDC allowed
Positive, Negative, GND Terminals
2.5 mm screwdriver blade
500 mA max@ 24 VDC
–20 to 50°C (–4 to 122°F)
–40 to 85°C (–40 to 185°F)
5 to 95% (non-condensing)
Standard: 5.20H x 2.07W x 4.52D in.
(13.2cmH x 5.25cmW x 11.48cmD)
Extended: 5.20H x 2.73W x 4.52D in.
(13.2cmH x 6.934cmW x 11.48cmD)
Power and Module Status
Application Status
Serial Port Activity LED
Serial Activity and Error LED Status
Current Load
Operating Temperature
Storage Temperature
Relative Humidity
LED Indicators
ProSoft Configuration Builder
ProSoft Configuration Builder (PCB) provides a quick and easy way
to manage module configuration files customized to meet your
application needs. PCB is not only a powerful solution for new
configuration files, but also allows you to import information from
previously installed (known working) configurations to new projects.
Additional Products
ProSoft Technology offers a full complement of hardware and
software solutions for a wide variety of industrial communication
Visit our web site at http://www.prosoft-technology.com for a
complete list of products.
Ordering Information
To order this product, please use the following:
IEC 60870-5-103 Master to
PROFIBUS DP Slave Gateway
To place an order, please contact your local ProSoft Technology
distributor. For a list of ProSoft distributors near you, go to
Place your order by email or fax to:
North American / Latin American / Asia Pacific
fax to +1 661.716.5101
fax to +33 (0)
Copyright © ProSoft Technology, Inc. 2000 - 2007. All Rights Reserved.
May 03, 2007
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF