P r e c i s i o n  ...
Precision Architectural Loudspeaker Series
Parasound’s Precision Architectural
Loudspeakers are the finest in-wall and ceiling
speakers you can buy. They embody 20 years of
the Parasound heritage of high end sound, topnotch parts and build quality, and reliability you
can count on.
There are eight different PAL models designed to
fit inconspicuously in every room of your home.
Every model from the smallest to the largest uses
identical high quality materials. You'll enjoy
virtually invisible installation without
compromising sound quality.
8" cast frame, long throw Kevlar cone woofer with
powerful strontium magnet, acoustic phase plug,
and dust screen
2" soft dome midrange utilizes ferrofluid damping/
cooling, powerful Neodymium magnet and
anti-diffraction ring
1" aluminum dome tweeter utilizes ferrofluid damping/
cooling, powerful Neodymium magnet and
anti-diffraction ring
Pivoting, acoustically sealed tweeter/midrange sub-chamber
Mirror-imaged driver array on rigid "floating" baffles
Three position level controls for treble and midrange
Two position level control for mid-bass
24k Gold "Constant Pressure" 10 AWG push terminals
Knockout plug for installing infrared receiver
Parasound's 10 years parts, 5 years labor warranty
Frequency response: 36Hz - 22kHz +/- 2dB
Nominal impedance: 6Ω
Minimum impedance: 4Ω
Sensitivity: 89dB 1 watt/1 meter
Power range: 10 - 120 watts
Woofer size: 8”
Woofer cone material: Kevlar
Surround material: Multi-layer polyurethane
Midrange size/material: 2” soft fabric dome
Tweeter size/material: 1” aluminum dome
Cut-out hole dimensions: 8-5/8" x 12-3/4"
Outer edge of frame: 10" x 14"
Parasound Products, Inc. 950 Batter y Street, San Francisco, CA 94111
415-397-7100 / FAX 415-397-0144 www.parasound.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF