Marine LCD Display MV-1504/1704/1904/2104 (04-0-13122013)

Marine LCD Display MV-1504/1704/1904/2104  (04-0-13122013)
Unicont SPb Ltd
Marine LCD Display
MV-1504/1704/1904/2104
Operating Manual
(04-0-13122013)
St. Petersburg
2013
v.0.0
Unicont SPb Ltd
Operating manual MV-1504/1704/1904/2104
Table of Contents
1. GENERAL INFORMATION ..........................................................................................4 2. DELIVERY SET ...............................................................................................................4 3. SPECIFICATIONS ..........................................................................................................5 4. MOUNTING AND CONNECTION ...............................................................................6 5. CONTROLS ....................................................................................................................10 6. TRANSPORTATION AND STORAGE ......................................................................11 7. WARRANTY ..................................................................................................................12 8. DATE OF PACKING .....................................................................................................13 9. ACCEPTANCE DETAILS ............................................................................................13 10. DATE OF COMMISSIONING .....................................................................................13 Page 2
Unicont SPb Ltd
Operating manual MV-1504/1704/1904/2104
This operating manual (OM) is designed for marine LCD display MV-1504/1704/1904/2104.
The OM is designed for study of design, operation principles and operation rules of the
device for its intended use and maintenance. The OM may also be a source of information about the
device to compile relevant sections of the equipment operational documentation in which the device
can be used as an integral part.
Important! The company-manufacturer does not assume any responsibility that comes with
loss or damage resulting from use of this product or related documentation.
All information in this manual is distributed by the company for information purposes only.
They are subject to change without notice of consumers; they may contain errors or inaccuracies.
Information specified may not include an obligation on the part of the company Unicont Spb Ltd.
Page 3
Unicont SPb Ltd
Operating manual MV-1504/1704/1904/2104
1. GENERAL INFORMATION
Marine LCD MV-1504/1704/1904/2104 series MasterView is a multipurpose display used to
output visual data received from the navigation system and other automated systems.
2. DELIVERY SET
1.
2.
3.
4.
5.
6.
7.
Marine LCD MV-xx04
Plate/desktop mounting brackets
Operation Manual
VGA cable
DVI cable
Feeding cable
Sunscreen
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
As an option you may choose to add the following items to the scope of supply:
 Touch-sensitive screen (touch screen), model of execution is marked with MV-xx04 TS
 CD with drivers.
Page 4
Unicont SPb Ltd
Operating manual MV-1504/1704/1904/2104
3. SPECIFICATIONS
Table 1. Versions
Parameter
Power supply voltage
Power demand
Display diagonal
Viewable area of the screen
Angle of view
Contrast
Brightness
Response time
Resolution
Point size
Vertical repetition frequency:
Horizontal repetition
frequency:
Dimensions (mm)
Max. weight:
Protection class:
Storage temperature
Operating temperature
MV-1504
MV-1704
MV-1904
MV-2104
110/220 VAC / 9...36 VDC
40 W
60 W
80 W
100 W
15”
17”
19”
21”
305 х 229 mm 337 х 270 mm 377 х 302 mm 432 х 324 mm
160°
170°
170°
178°
400:1
1000:1
700:1
1000:1
2
2
2
430 Cd/m
300 Cd/m
300 Cd/m
300 Cd/m2
25 ms
5 ms
5 ms
5 ms
1024 х 768
1280 х 1024
1280 х 1024
1600 х 1200
0.297 mm
0.264 mm
0.294 mm
0.27 mm
56–75 Hz
30–63 kHz
371х340.5х77
7 kg
30–81 kHz
30–81 kHz
31–91 kHz
411.5х388х75 449х418х75
9 kg
12 kg
IP 22
-55...+75°С
-25...+55°С
510х443х81
15 kg
Backlight intensity is adjusted by the dimmer and can be fully cancelled (“deep dimming”).
Page 5
Unicont SPb Ltd
Operating manual MV-1504/1704/1904/2104
4. MOUNTING AND CONNECTION
Device casing provides for it to be mounted on the desktop and on the plate.
If plate mounting is chosen, refer to the dimensional drawing (Figure 1) to prepare the
location where the display is to be mounted to the control panel plate with fixing holes. If desktop
mounting is chosen, attach the brackets to the display casing, prepare the location and tighten M5
screws to fix the display to the brackets.
Mounting being completed, lay connecting cables from external devices and connect it to the
matching display connectors. Tighten the fixing screws to avoid their inadvertent disengagement.
After mounting and connection are completed, power the device up and ensure that the
graphical data are properly output on the screen.
It is possible to connect several video signal sources (1 x VGA, 1 x DVI, 2 x AV and 1 x SVideo).
Power Connector
Power
Pin 1
Pin 2
24 VDC
+18...36 VDC
0 VDC
220 VAC
L
N
Page 6
Unicont SPb Ltd
Operating manual MV-1504/1704/1904/2104
DVI Connector
Pin number
Designation
Pin number
Designation
1
DATA2-
16
HOT PLUG DET
2
DATA2+
17
DATA0-
3
DATA2/4 SHIELD
18
DATA0+
4
DATA4-
19
DATA0/5 SHIELD
5
DATA4+
20
DATA5-
6
DDC CLK
21
DATA5+
7
DDC DATA
22
CLOCK SHIELD
8
ANALOG VSYNC
23
CLOCK+
9
DATA1-
24
CLOCK-
10
DATA1+
11
DATA1/3 SHIELD
С1
ANALOG RED
12
DATA3-
С2
ANALOG GREEN
13
DATA3+
С3
ANALOG BLUE
14
+5V POWER
С4
ANALOG HSYNC
15
GND
С5
ANALOG GND
Composite Connection (Composite Input)
display
signal
Page 7
Unicont SPb Ltd
Operating manual MV-1504/1704/1904/2104
S-Video Connector
Pin number
Designation
Pin number
Designation
1
GND
3
Brightness
2
GND
4
Color
Pin number
Designation
Pin number
Designation
1
Red
9
NC
2
Green
10
GND
3
Blue
11
GND
4
GND
12
SDA
5
GND
13
HSYNC
6
Red GND
14
VSYNC
7
Green GND
15
SCL
8
Blue GND
VGA Connector
Page 8
Unicont SPb Ltd
Operating manual MV-1504/1704/1904/2104
Figure 1. Dimensions
Version
MV-1501
MV-1701
MV-1901
MV-2101
A
371
411.5
449
509.5
B
357
395.5
433
493.5
C
60
75.5
75.5
77
Dimension (mm)
D
E
F
220.5
58
14
217
58
19.5
247
58
19.5
269
67
17
Page 9
G
340.5
388
418
443
H
311
352
382.5
410.5
I
343
373
411.5
475.5
Unicont SPb Ltd
Operating manual MV-1504/1704/1904/2104
5. CONTROLS
Menu Access Button
Set Button (to apply
changed parameters and
to access menu items)
Dimmer (Backlight)
Power LED
Setting Selection
and Change Buttons
Display Power on/off
Button (to choose
video signal sources)
The following controls are located on the front panel:
1. Display Power on/off button (short-time pushing switches the display over cycle-wise
according to the video signal sources).
2. “MENU”. Enter/exit button to access the display settings menu. When in the menu, this
button allows to exit the active setting without saving the changed parameter.
3. “▲” and “▼”. Selection buttons to select a menu item/parameter measurement. When in
the menu, this buttons allow to scroll up the items (settings) up and down. If any setting is changed,
they are used to increase/decrease its value.
4. Dimmer to control the backlight intensity. Turn it up to the stop in direction right to
maximize the backlight intensity. Turn it up to the stop in direction left to cancel it (no backlight).
5. Power LED shows that power is available and the device is operating. If power is on and
video signals are received from the current video input, this LED is green. If power is off or no video
signal available in the current input, the LED goes out.
Warning! Changing backlight intensity automatically and correspondingly changes the LEDlight intensity. If it is in the minimum (backlight cancelled), the LED will go out.
Page 10
Unicont SPb Ltd
Operating manual MV-1504/1704/1904/2104
6. TRANSPORTATION AND STORAGE
The device shall be stored in heated space at air temperature of +5 ºС to +35 ºС (maximum
values of -55 ºС to +75 ºС), at relative humidity of air not exceeding 95 % at temperature of +25 °C
and content of dust, oil, moisture and aggressive admixtures in the air not exceeding the norms
envisaged by GOST 12.1.005-88 for the working zone of production areas.
The device shall be transported in transport container of the manufacturer in closed transport.
Means of transport:
 automobile and railway closed transport (covered wagons, universal containers)
 by air (in pressurized and heated bays of airplane)
 by sea (in dry service spaces).
The device shall be transported in accordance with the transport regulations in force for the
particular transport.
During handling operations and transportations strictly observe the requirements of handling
marks on boxes and do not allow bumps and impacts which can affect preservation and serviceability
of the device.
Packed devices shall be reliably secured in vehicles.
After storage in stores or transportation at temperature below +10 ºС the devices shall be
unpacked only in heated spaces after keeping them unpacked in under normal climatic conditions
for12 hours.
Page 11
Unicont SPb Ltd
Operating manual MV-1504/1704/1904/2104
7. WARRANTY
The manufacturer guarantees the unit complies with this manual provided that the operation,
transportation and storage conditions are adhered to during the warranty period.
The unit’s warranty period expires 24 months from the date of its shipping from the
manufacturer’s storehouse.
Within the warranty period, the owner is entitled for a free repair, or a replacement of a
separate part, provided that the malfunction occurred through the manufacturer’s fault.
Warranty repair is provided if the unit is submitted with the manufacturer’s label and a
legible serial number available on it, as well as this operating manual.
The manufacturer is not responsible and cannot guarantee the unit’s operation:
1. After the warranty period is over;
2. In case of the failure to observe the unit’s operation, transportation, storage and
installation rules and conditions;
3. If the unit is in an unmarketable condition, or has a damaged body, and other causes
beyond the manufacturer’s control;
4. If self-made electrical devices were used.
5. If there was an attempt to repair the unit by a person who is not an authorized
representative of the manufacturer.
If the owner loses this operating manual or the manufacturer’s label with a serial number, the
manufacturer shall not provide their copies, and the owner shall be divested of the right for a free
repair during the warranty period.
Upon the warranty expiry, the manufacturer shall facilitate the repair of the unit at the
owner’s expense.
Note: in case of warranty repair, the unit’s disassembling from the installation site and its
delivery to the manufacturer’s service center are done at the owner’s expense.
Visit the manufacturer’s website www.unicont.spb.ru (section “support/warranty”) to find:
 forms to fill in claims,
 full warranty description;
 full description of the warranty service rendering procedure.
The manufacturer service center’s address and contact details:
Unicont SPb, Ltd.
Bld. 26Е Kibalchich Str., Saint Petersburg, 192174, Russia
tel.: + 7 (812) 622 23 10, +7 (812) 622 23 11
fax: +7 (812) 362 76 36
e-mail: service@unicont.spb.ru
Page 12
Unicont SPb Ltd
Operating manual MV-1504/1704/1904/2104
8. DATE OF PACKING
Marine LCD Display
№
name of article
Packed
designation
serial number
Unicont SPb Ltd., Russia.
Manufacturer
according to the requirements of the current technical documentation.
post
signature
clarification of signature
year, month, day
9. ACCEPTANCE DETAILS
Marine LCD Display
№
name of article
designation
serial number
was manufactured and accepted in accordance with the regulatory requirements of the
state standards and applicable technical documentation, and is suitable for operation.
Quality control representative
Stamp
here
signature
clarification of signature
year, month, day
10. DATE OF COMMISSIONING
Marine LCD Display
№
name of article
designation
serial number
The unit has been put into operation.
Date of installation:
_________________________________________
Place of installation:
_________________________________________
Person in charge of installation: _________________________________________
Page 13
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising