IN 842
IH-528
Innovations in Communications TM
since 1955
SURFACE MOUNT BACK BOX
APPLICATION
The IH528 (IH-528) Surface-Mount Single-Gang Plastic Back Box is
for use with the Tek-CARE®500 Wireless Emergency Call System.
The back box is used to surface mount the SF529 Check-In/Assistance Station or the SF531 Emergency Switch.
The IH528 is constructed of durable ABS plastic to coordinate with
the emergency switches, and does not interfere with wireless transmission signals. The back box includes mounting holes on the back
for attachment to the wall.
FEATURES
• Durable ABS Platic
• Mounting holes front and back
SPECIFICATIONS
Dimensions: Height: 4.5" (115 mm)
Width: 2.85" (72 mm)
Depth: 1.38" (35 mm)
Plastic: 3.00 mm thick
Material: ABS plastic
REQUIRED COMPONENTS
Tek-CARE®500 Wireless Emergency Call System
SF529 Check-In/Assistance Station
-orTek-CARE®500 Wireless Emergency Call System
SF531 Emergency Switch
IH-528
Surface Mount Box
ARCHITECTS’ AND ENGINEERS’
SPECIFICATIONS
The surface-mount single-gang plastic back box shall be
TekTone® IH528 or approved equal as supplied by
LEE DAN®. The IH528 shall be of plastic construction
for durability and for unhindered wireless signal transmission.
The IH528 shall be used in wireless applications for
mounting the SF529 Check-In/Assistance Station or the
SF531 Emergency Switch. Mounting holes shall be
provided on the back for easy mounting to the wall, and
on the front for easy mounting of the emergency switch
to the back box.
TekTone® has designed Tek-CARE®500 to work as a system. Its NC501 Master Station Computer has been carefully designed and
matched to work with Tek-CARE®500 wireless and wired peripherals. TekTone® will not warrant or support components of TekCARE®500 that are purchased separately unless the components are add-ons to previously sold systems. TekTone® will also not warrant
or support a system that is a mix of TekTone® and Non-TekTone® parts, unless prior permission has been obtained. A site survey must be
performed and submitted before ordering a Tek-CARE®500 system. In order to track our systems and to inform facilities of software
upgrades, full site information (site name, address and phone number) will be required when ordering. Site information and NC501
warranty numbers will also be required when requesting technical support.
800-231-1414 • 631-231-1414
155 Adams Avenue • Hauppauge, NY 11788-3699
Fax 631-231-1498 • www.LEEDAN.com
©2009 LEE DAN® Communications, Inc.
INTERCOMS • MAILBOXES • DIRECTORIES
NURSE-CALL • ANNUNCIATORS • WIRE & CABLE
With continuous product improvement, specifications are subject to change without notice.
IN-842 Rev. 0 (9/09)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising