Scame Industrial Plugs Sockets Connectors
CABLE JOINTS, CABLE TERMINATIONS, CABLE GLANDS, CABLE CLEATS
FEEDER PILLARS, FUSE LINKS, ARC FLASH, CABLE ROLLERS, CUT-OUTS
EASIGO Series
INDUSTRIAL PLUGS AND SOCKETS TO
BS196-1961
11KV 33KV CABLE JOINTS & CABLE TERMINATIONS
FURSE EARTHING
www.cablejoints.co.uk
Thorne and Derrick UK
Tel 0044 191 490 1547 Fax 0044 191 477 5371
Tel 0044 117 977 4647 Fax 0044 117 9775582
REFERENCE
STANDARDS
BS 196: 1961
Industrial Plugs & Sockets
BS196 FITTINGS (5-30 AMPERES)
In1930, BS196 was issued as the first British Standard
covering industrial plugs and sockets. The standard was
revised in 1961 at which time many of the innovations
introduced by ourselves since 1930 were included e.g.
keys and keyways for voltage discrimination and fused
plugs. The standard covers single phase fittings in
current ratings of 5, 15 and 30 amperes.
SCAME UK THREE PHASE FITTINGS (15-60 AMPERES)
The Easigo series of industrial plugs and sockets BS196.1961
is now in the professional hands of Scame limited.
For over 40 years this range continues to provide a
comprehensive choice of protected type non-reversible
single phase plugs, sockets and switches interlocked
sockets in current ratings from 5, 15 and 30 amperes.
The Easigo series also includes 3-phase fittings rated
from 15 to 60 amperes using the same principal of
construction and safety as defined in BS196.
The robust design combines cast metal and high
performance moulded materials making them suited
for the most arduous of environments – typical
industries where this product is well entrenched are
Power Stations, Steel Mills, Distilleries and Breweries,
Chemical Plants, Railways and Airports not only in the
United Kingdom but also overseas.
EASIGO - FEATURES
Range of protected type non-reversible plugs and
sockets with scraping earth connections 5-60 Amperes.
The EASIGO range comprises single phase plugs and
sockets to BS196 and also three-phase with our own
arrangement of pin centres.The fittings have die cast
zinc alloy casings and insulated materials are used for
the back casings of the angle entry plugs and the
spring flap covers of the 5 and 15 ampere 2 pole flush
sockets. These materials have been specifically
selected to withstand the arduous conditions
encountered in industrial applications.
The EASIGO range provides a complete system of connections
from the socket outlet on the wall to the appliance inlet
mounted on apparatus.
t. 30
Until 1968, when BS4343 was issued, no British
Standard existed to cover the requirement for threephase plugs and sockets. SCAME UK, in similar manner
to other manufacturers, produced fittings with their
own unique pin configurations. The SCAME UK threephase range was developed using the same principles
of construction and safety as specified in BS196.
DEGREES OF INGRESS PROTECTION
The accessories supplied by SCAME UK conform to the
ingress protection requirements specified by Clause
27, Section 5 of British Standard 196: 1961. Flush
sockets 5 – 15 ampere, single phase have increased
ingress protection to IP55. However, if fittings are
being used in exposed outdoor installations, it is
recommended that additional means of protection,
such as canopies or enclosures, should be provided.
The SCRAPING EARTH feature provided by permanently
resilient tongues fitted to the socket and connector
casings ensures that the earth connection is made
before and breaks after the main circuit connections and
eliminates the need for a separate earth pin and tube.
Only BS196 offers the facility of industrial ring socket
outlets which will prevent the insertion of an unfused
plug.A range of appropriate fused plugs is available.
The EASIGO range of switch sockets incorporates
mechanical interlocks which are designed so that the
socket contacts are never accessible when live. The plug
can only be withdrawn from the socket with the switch in
the OFF position and the switch cannot be closed untill
the plug is fully inserted. Some of the switch sockets can
be provided with RCCB protection.
TECHNICAL
DATA
1.4
The pilot contacts provided are intended for use with
continuously monitored earth proving devices, but
they can be used with any protective system requiring
an insulated contact. The pilot contact pin in the plugs
is shorter in length than the phase pins and so makes
after and breaks before the phase contacts. The
current carrying capacity of the pilot contact is:
- 15 amp size – 10 amps
- 30 amp size – 25 amps
The pilot contact is not the earth contact of the fitting.
Switch sockets can be supplied incorporating a pilot
contact for use in multi-outlet earth monitoring
systems which require the monitoring circuit to be
maintained when the plug is removed. These have an
auxiliary contact on the rotary switch which opens
before the main contacts close and closes after the
main contacts open.
All switch sockets incorporate double pole or triple
pole double break switches. The 5 and 15 ampere 2
pole switches are suitable for A.C. and D.C. while the
remainder are suitable for A.C. systems only. The units
containing mercury switches are suitable for A.C. and
D.C. systems and must be mounted vertically.
1
PLUG&
SOCKETS
IEC309
EUREKA
ADAPTORS
EASIGO
HEAVY DUTY
CEEGO
2
COMBINATION
UNITS
OMNIA
ADVANCE
QUADRA
Distribution assemblies
Screw in
fuse pin
Colour
coding
MEGA
MASTERBOX
DOMINO
BLOCK
GOMMA
PDU
3
ENCLOSURES
& BOXES
Shrouded
plug pins
EASYBOX
DOMINO
BLOCK
SCABOX
ALUBOX
ACCESSORIES
4
INSTALLATION
ACCESSORIES
TRUNKINGS
LUMINAIRES
CABLE REELS
FUSES
SWITCHES
CONNECTORS
Ring
main
sockets
Scraping
earth
INDEX
Deeply
recessed
contact
tubes
Robust
construction
t. 31
EASIGO Series
EASIGO - FEATURES
Plug and socket key and keyway positions for
non-interchangeability.
In addition to the differences in the size of the casings
and the size and position of the contact pins, BS196:
1961 requires that undesirable interchangeability
between accessories shall also be prevented by the use
of key and keyways on the plug and socket casings.
The key and keyway combinations which have been
established for different systems are as shown
overleaf and the diagram below. The corresponding
key positions of the plug or appliance inlet when
looked at from the front are the opposite to those
shown below.
View looking at the front face of the socket-outlet or connector.
This catalogue contains products with voltage/frequency discrimination of popular demand.
Other variations are available on request.
t. 32
TECHNICAL
DATA
1.4
THREE-PHASE PLUGS AND SOCKETS
COLOUR CODING
In addition to the standard 415 volt arrangements, the
three-phase (3 pole) fittings are also available as types
AN, XK and DR. In this connection the symbols are used
for the purpose of convenience and do not necessarily
conform with the appropriate voltage and frequency
laid down for single phase fittings in BS196: 1961.
In addition to the above key and keyway system, the 5
and 15 ampere 2 pole fittings are colour coded as
follows:
- 240 volt – blue
- 50 volt – white
- 110 volt – yellow
- 25 volt – violet
Code AN
Normally for 125V 200Hz systems
Code XK
Normally for 50V 50Hz systems
Code DR
Normally for 110V 50Hz systems
- 5 ampere
- 15 ampere
- 30 ampere
- 60 ampere
- 10 ampere max
- 20 ampere max
- 40 ampere max
- 80 ampere max
2
COMBINATION
UNITS
OMNIA
ADVANCE
QUADRA
Distribution assemblies
Frequency
Keyway
1
Keyway
2
Keyway
3
Earth
Code
25
50
None
0°
180°
Yes
AN
50
50
None
135°
315°
Yes
XK
110
50
None
45°
225°
Yes
DR
240
50
None
None
None
Yes
None
Alternative configurations available:- Contact Sales Hotline
π * 240
50
None
30°
120°
Yes
CQ
25
other than 50
(e.g. 60)
0°
120°
300°
Yes
AJW
50
other than 50
(e.g. 60)
π 110
other than 50
(e.g. 60)
45°
120°
300°
Yes
DJW
π 240
other than 50
(e.g. 60)
30°
120°
300°
Yes
CJW
π ■ 25
D.C.
0°
60°
240°
Yes
AES
π ■ 50
D.C.
315°
60°
240°
Yes
XES
π ■ 110
D.C.
45°
60°
240°
Yes
DES
π ■ 240
D.C.
30°
60°
240°
Yes
CES
π
π
*
π
■
IEC309
EUREKA
ADAPTORS
EASIGO
HEAVY DUTY
CEEGO
The plugs and sockets can carry currents in excess of
their stated capacity. The maximum continuous ratings
are as follows, provided that adequate cabling is used:
Commonly used configuration
Colour
PLUG&
SOCKETS
CURRENT RATINGS
SCHEDULE OF AVAILABLE KEY AND KEYWAY COMBINATIONS
Voltage
1
MEGA
MASTERBOX
DOMINO
BLOCK
GOMMA
PDU
3
ENCLOSURES
& BOXES
EASYBOX
DOMINO
BLOCK
SCABOX
ALUBOX
ACCESSORIES
4
315°
120°
300°
Yes
XJW
INSTALLATION
ACCESSORIES
TRUNKINGS
LUMINAIRES
CABLE REELS
FUSES
SWITCHES
CONNECTORS
INDEX
Included for situations where complete non-interchangeability is essential.
Original design to BS196: 1930.
Only available with EASIGO flush socket outlets with spring flap covers & angle entry plugs.
Fused plugs must not be used in D.C. systems.
t. 33
EASIGO Series
FUSE SWITCH SOCKET
WITH RCCB PROTECTION
Designed for and approved by the former Central
Electricity Generating Board.
Features
- Sheet steel enclosure with durable dark admiralty
grey finish which has been subjected to appropriate
environmental tests.
- Units meet IP44 specification.
- The units have undrilled gland plates to top and
bottom, facilitating top or bottom cable entry.
- A die cast cover with padlocking facility gives access
to the RCCB which has a tripping sensitivity of 30mA
operating in a maximum of 30mS.
- The fuse switch is interlocked with the lid and the
socket outlet.
- Unit is fully interlocked and cannot be switched on
until the correct plug is fully inserted, nor can the
plug be withdrawn on load.
- Provision for padlocking the switch handle in the OFF
position.
- Units are tested at through fault level of 31.5MVA.
- If necessary, units can be supplied without the RCCB
and solid links can be fitted in place of fuses.
- Units can also be provided with an earth monitoring
facility in accordance with optional features in CEGB
specification.
- Designed to loop up to 35mm2 cables.
60 A
F
G
H
J
Max cable
Phase
Earth
Stud
Wt.
Kg
60A All types 560 326 205 296 440 60
75
2
155
35 mm2
M8
23
Description
t. 34
A
B
C
D
E
TECHNICAL
DATA
1.4
PLUGS
1
PLUG&
SOCKETS
IEC309
EUREKA
ADAPTORS
EASIGO
HEAVY DUTY
CEEGO
Straight
Description
5A
Max. Cable mm2
L&N PINS
EARTH PINS
4
2.5
Max. Cable Ø Wt. Kg
11
.12
11
.12
2
Description
2POLE + E
15A
3POLE + E
A
B
C
83 104 48
83 104 57
Max. Cable mm2
Earth
Phase
6
6
6
6
COMBINATION
UNITS
Max. Wt.
Cable Ø Kg
12
13
OMNIA
ADVANCE
QUADRA
.25
.33
Distribution assemblies
MEGA
MASTERBOX
DOMINO
BLOCK
GOMMA
PDU
Description
60A
ALL TYPES
A
B
C
200 74 148
Max. Cable mm2
Earth
Phase
25
16
3
Max. Wt.
Cable Ø Kg
30
ENCLOSURES
& BOXES
1.4
EASYBOX
DOMINO
BLOCK
SCABOX
ALUBOX
ACCESSORIES
3 pole fused
Description
15A
3POLE + E
A
B
137 58
Max. Cable mm2
Earth
Phase
6
6
Max. Wt.
Cable Ø Kg
16
4
.29
INSTALLATION
ACCESSORIES
TRUNKINGS
LUMINAIRES
CABLE REELS
FUSES
SWITCHES
CONNECTORS
Angled
Description
5A
2POLE + E
2POLE + E
2POLE + PILOT + E
15A
3POLE + E
3POLE + PILOT + E
2POLE + E
2POLE + PILOT + E
30A
3POLE + E
3POLE + PILOT + E
A
48
47
49
49
63
63
63
65
65
B
43
47
52
52
58
58
58
65
65
C D
64 65
70 73
75 78
75 78
92 93
92 93
92 93
96 100
96 100
Max. Cable mm2
Phase
Earth
2.5
6
6
6
6
6
6
6
10
10
10
10
10
10
10
10
10
10
Max. Wt.
Cable Ø Kg
11
12
13
13
18
18
18
18
18
.10
.14
.17
.17
.32
.32
.32
.32
.32
INDEX
t. 35
EASIGO Series
SOCKETS
Surface
Description
5A
2POLE + E
2POLE + E
2POLE + PILOT + E
15A
3POLE + E
3POLE + PILOT + E
30A
ALL TYPES
60A
ALL TYPES
D
51
60.5
68
68
76
76
95
E
25
36
44
44
50
50
60
A
B
C D
46 86 68 5.5
46 86 68 5.5
59 111 85.5 5.5
59 111 85.5 5.5
95 100 80 5.8
E
M5
M5
M5
M5
M5
A
27
38
42
42
56
56
82.5
B
57
68
76
76
84
84
108
C
3.5
4.5
4.5
4.5
4.5
4.5
7
F
Max. Cable mm2
6
M3
10
M3.5
10
M3.5
10
M3.5
10
M3.5
25
M3.5
25
M6
Wt. Kg
.12
.25
.30
.30
.53
.53
1.2
Flush (circular flap)
Description
2POLE + PILOT + E
15A
3POLE + E
3POLE + PILOT + E
30A
ALL TYPES
60A
ALL TYPES
G
F
73 95
73 95
80 108
80 108
92 110
Max. Cable mm2
10
10
10
25
25
Wt. Kg
.5
.48
.88
.88
1.0
Max. Cable mm2
6
10
Wt. Kg
.17
.27
Flush (square flap) IP55
Description
5A
2POLE + E
15A
2POLE + E
t. 36
A
27
40
B
C D
E
F
76 57 4.5 M3.5 54
86 68.3 5.5 M5 73
G
85
95
TECHNICAL
DATA
1.4
Serie
CONNECTORS
1
PLUG&
SOCKETS
IEC309
EUREKA
ADAPTORS
EASIGO
HEAVY DUTY
CEEGO
Straight
Description
15A
3POLE + PILOT + E
2POLE + E
2POLE + PILOT + E
30A
3POLE + E
3POLE + PILOT + E
A
84
84
84
84
84
B
104
104
104
104
104
Max. Cable mm2
Phase
Earth
6
10
10
25
10
25
10
25
10
25
Max. Wt.
Cable Ø Kg
18
18
18
18
25
.85
.85
.85
.85
.85
2
COMBINATION
UNITS
OMNIA
ADVANCE
QUADRA
Distribution assemblies
MEGA
MASTERBOX
DOMINO
BLOCK
GOMMA
PDU
Angled
Description
5A
2POLE + E
2POLE + E
15A
2POLE + PILOT + E
3POLE + E
A
64
74
82
82
B
64
77
82
82
C
54
60
64
64
Max. Cable mm2
Phase
Earth
2.5
6
2.5
10
2.5
10
2.5
10
Max. Wt.
Cable Ø Kg
11
12
13
13
.17
.31
.36
.36
3
ENCLOSURES
& BOXES
EASYBOX
DOMINO
BLOCK
SCABOX
ALUBOX
ACCESSORIES
APPLIANCE INLETS
4
INSTALLATION
ACCESSORIES
Surface
Description
5A
2POLE + E
2POLE + E
15A
3POLE + E
2POLE + E
30A
3POLE + E
A
42
58
66
70
71.5
B
49
58
64
77
73
C
20
26
26
40
90
Max. Cable mm2
Phase
D
F
G
E
Earth
6
42 147.5 4BA 29.5
6
73 73 M3 35
6
73 73 M4 48.5
10
90 90 4BA 48.5
10
40 90 4BA 48.5
Max. Wt.
Cable Ø Kg
2.5
6
6
10
10
TRUNKINGS
LUMINAIRES
CABLE REELS
FUSES
SWITCHES
CONNECTORS
.13
.25
.34
.34
.37
INDEX
t. 37
EASIGO Series
APPLIANCE INLETS
Flush
Description
15A
2POLE + E
A
34
B
86
C D
E
F
68 5.5 M5 56
G
78
Max. Cable mm2
Phase
Earth
6
2.5
CONDUIT BOXES
Surface mounted for surface sockets
CAT No
611
621
631
651
A
B
C D
20 4 66.5 M3
20 5.5 81 M3.5
20 5.5 90.5 M3.5
26 7 98.5 M3.5
CAT No
661
A
B
127 95
E
51
60.5
68
75
E
C D
67 33.5 57
F
57
68
76
84
G
33
33
41
44
H
17
17
21
24
Wt.
Kg
.14
.18
.30
.31
Wt.
F Kg
32 3.9
Surface mounted for flush sockets
and appliance inlets
CAT No
711
721
741
A
B
C D
E
F
20 5.5 M3.5 76 33 57
20 7 M5 86 73 68
25 7 M5 111 80 85.5
Wt.
G H Kg
89 17.5 .26
102 20.5 .44
127 20.5 .90
Flush mounted for flush sockets
and appliance inlets
CAT No
715
725
745
t. 38
A
67
79
98
B
C
32 57
79 68
76 85.5
D
4BA
2BA
2BA
Wt.
Kg
.4
1.1
1.4
Wt.
Kg
.42
TECHNICAL
DATA
1.4
MULTI-SOCKET OUTLETS
1
PLUG&
SOCKETS
IEC309
EUREKA
ADAPTORS
EASIGO
HEAVY DUTY
CEEGO
2
COMBINATION
UNITS
Metal housing
Description
5A
2POLE + E
15A
2POLE + E
A
B
C
186 113 102
186 113 102
D
120.5
120.5
E
101.5
101.5
F
7
7
G
2
2
H
J
21 165
21 175
Max. Cable mm2
Phase
Earth
10
4
10
4
Wt.
Kg
OMNIA
ADVANCE
QUADRA
1.8
2.0
Distribution assemblies
MEGA
MASTERBOX
DOMINO
BLOCK
GOMMA
PDU
3
ENCLOSURES
& BOXES
EASYBOX
DOMINO
BLOCK
SCABOX
ALUBOX
ACCESSORIES
Insulated housing
Description
2POLE + E
5A
2POLE + E
2POLE + E
15A
2POLE + E
2 GANG
3 GANG
2 GANG
3 GANG
A
204
360
204
360
B
159
315
159
315
C
91
91
91
91
D
71
71
71
71
E
7
7
7
7
F
104
104
104
104
G
167
167
177
177
H
40
40
40
40
Max. Cable mm2
Phase
Earth
10
10
10
10
10
10
10
10
Max. Wt.
Cable Ø Kg
21
21
21
21
1.1
1.5
1.3
1.9
4
INSTALLATION
ACCESSORIES
TRUNKINGS
LUMINAIRES
CABLE REELS
FUSES
SWITCHES
CONNECTORS
INTERLOCKED SWITCHED SOCKETS
INDEX
2 pole + earth 5 and 15 amperes
Description
5A
2POLE + E
15A
2POLE + E
A
B
C
76 121 60
86 137 68
D
E
F
5 50.5 73
5 63.5 76
G
14
17
H
67
75
J
K
L
21 14.5 5
21 16 6
M
24
24
Max. Cable mm2
Phase
Earth
6
6
6
6
Wt.
Kg
.95
1.2
t. 39
EASIGO Series
INTERLOCKED SWITCHED SOCKETS
All types except 2 pole + earth
5 and 15 amperes and R.C.D.
3, HOLES “A”
t. 40
Description
15A
30A
A
35
35
B
25
21
Description
60A
A
35
B
21
TECHNICAL
DATA
1.4
INTERLOCKED SWITCHED SOCKETS
1
PLUG&
SOCKETS
Interlocked switched
sockets with R.C.D.
Description
15A
30A
A
35
35
B
25
21
IEC309
EUREKA
ADAPTORS
EASIGO
HEAVY DUTY
CEEGO
2
COMBINATION
UNITS
OMNIA
ADVANCE
QUADRA
Distribution assemblies
Description
60A
A
35
B
21
MEGA
MASTERBOX
DOMINO
BLOCK
GOMMA
PDU
3
ENCLOSURES
& BOXES
EASYBOX
DOMINO
BLOCK
SCABOX
ALUBOX
ACCESSORIES
4
INSTALLATION
ACCESSORIES
CABLE JOINTS, CABLE TERMINATIONS, CABLE GLANDS, CABLE CLEATS
FEEDER PILLARS, FUSE LINKS, ARC FLASH, CABLE ROLLERS, CUT-OUTS
TRUNKINGS
LUMINAIRES
CABLE REELS
FUSES
SWITCHES
CONNECTORS
11KV 33KV CABLE JOINTS & CABLE TERMINATIONS
FURSE EARTHING
www.cablejoints.co.uk
Thorne and Derrick UK
Tel 0044 191 490 1547 Fax 0044 191 477 5371
Tel 0044 117 977 4647 Fax 0044 117 9775582
INDEX
t. 41
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising