Liebert DS Designed To A Higher Standard Of Performance And Reliability

Liebert DS Designed To A Higher Standard Of Performance And Reliability
Precision Cooling
For Business-Critical Continuity
Liebert DS ™
Designed To A Higher Standard Of Performance And Reliability
Liebert Understands The Need For Precision And Reliability...
And Why This Is So Important To You
For sensitive electronics, environmental control is more than simple cooling. “Comfort” air conditioning systems are designed
to cool people and office space. They simply cannot provide the kind of environment required by high performance computer or
communication equipment.
Why You Can’t Take Chances
When Cooling Your Critical Space
We Have The Right Solution For Your
Specific Application
Standard building cooling systems are designed to keep
Liebert has identified a number of distinct zones or areas of
people comfortable 8-12 hours each day from spring to
application found within many business-critical applications.
autumn with no provision for winter operation. A precision
Each zone has similarities, but with different needs for
cooling system is designed to operate over a wide range of
infrastructure protection—all of which can be met by
ambient temperatures from as low as -30°F (-34.4°C) up to
Liebert solutions.
120°F (48.9°C).
Specific zones where the Liebert DS can be used include:
Sensitive electronics must be maintained in a stable
Data Centers
environment of 68°F to 77°F (20°C to 25°C) with a relative
Computer Rooms
Labs And Testing
humidity of 40% to 55%. Computers and communications
Network Operations Centers
Production Facilities
Telecom/CATV
equipment generate six to ten times the heat density of
normal office space, the air conditioning system must
have more than just enough cooling capacity. It must
have the precision to react quickly to a drastic change
in heat load and prevent wide temperature
fluctuations—something a large building HVAC
system cannot do.
80
Hu
m
id
ity
75
Re
la
tiv
e
70
65
60
%
ity
id
m
Hu
e
iv
lat
ity
Re
id
%
m
50
Hu
e
iv
lat
Re
%
40
60%
50%
40%
2
60
in the field far exceeds the combined number of all other
Liebert Mission-Critical Cooling Systems are used in the
50
55
by which all others are judged. The number of units that are
cooling systems.
55
50
Liebert Mission Critical Cooling equipment is the standard
brands. Nine out of ten Fortune 500 Companies use Liebert
60
The ASHRAE document, “Thermal Guidelines
for Data Processing Environments,” spells out
the temperature, dew point and humidity
specifications for electronic components
operating in mission-critical facilities.
Types of equipment typically found
in these facilities are enterprise servers
and storage products.
A Tradition Of Reliability You Can Count On
65
70
75
80
Primary precision air
conditioning systems
keep room temperature
and humidity within
this area of control.
most demanding, critical applications in the world. From
banking to government to corporate computer and
communications centers, when it has to be the best—this is
the brand of choice.
The Liebert DS Is Designed And Built Like No Other
Why You Should Specify Liebert Over Competitive
Precision Systems
Reliability:
■
Proper protection of critical facilities takes more than bolting together
pre-engineered computer room cooling modules. In many cases, your
■
critical systems are only as reliable as the support equipment protecting
them. Compromising on a less capable precision cooling system can
■
compromise your operations. Your critical operations demand support
equipment that can provide the highest level of reliability.
■
Engineering Excellence Goes Into Every Liebert DS
The Liebert DS is based on the proven design and technology of Liebert
Deluxe Systems used in thousands of critical data centers around the
world since 1965.
■
Flexibility:
■
Full scale analysis and evaluation of the Liebert DS during all phases of
development and production is your assurance of the most advanced
performance and highest quality. Units are thoroughly tested under a wide
The Liebert DS is designed with the highest quality
components selected for their proven reliability and
performance.
Microprocessor technology adds automatic sequencing
of components to even wear and extend service life.
An alarm system and self-diagnostics provide rapid
troubleshooting and can prevent a problem before it
affects the electronic equipment room environment.
Air delivery system designed for optimized air
distribution and long service life.
Corrosion resistant frame and cabinet.
■
■
variety of temperature and humidity conditions.
■
■
■
■
Available in both downflow and upflow configurations to
cover a wide range of room applications.
Choice of compressors to match performance and energy
efficiency requirements.
Front access provides easy serviceability and saves
valuable floor space.
Modular frame construction allows even more flexibility
in meeting specific needs for installation—frame can be
field-separated into three sections.
Built-in humidity control and reheat function.
Liebert iCOM control system brings high-level
supervision to multiple units allowing them to work
together as a single system to optimize room
performance.
Available with R-407C environmentally friendly
refrigerant or R-22 standard refrigerant.
Low Total Cost Of Ownership:
■
■
■
Energy efficiency options and configurations can save
money and even pay back part of your investment over
the life of the product.
Built for serviceability, with many components—such as
the Paradenser™ cleanable condenser—designed to be
maintained rather than replaced.
Specifically designed for the demanding requirements of
year-round operation, the Liebert DS is actually less
expensive to operate over its life cycle compared to both
comfort cooling equipment and competitive precision air
conditioning products.
3
Engineered For Precision, Efficiency And Strength
The Liebert DS is designed to fit room applications requiring
Designed For Energy Efficiency
high level precision control of the room environment,
Liebert is dedicated to providing maximum energy
including temperature, humidity, filtration and airflow.
Precise Temperature And
Humidity Control
The environmental control system must be able to sense
and react to temperature and humidity fluctuations far
too small for building HVAC systems to control. The
Liebert DS is capable of control to within ±1°F (°C) and
±1% RH. By analyzing the rate of change in temperature
or the moisture content in the environment, the control
system anticipates what is going to happen in the room,
not simply responding to what has happened.
efficiency in its precision cooling systems without
compromising the accuracy and reliability demanded by
sensitive electronics. All enhancements to energy efficiency
are designed to reduce operating time of key components
and increase the Mean Time Between Failure. This is
accomplished by taking advantage of alternate sources
of cooling by minimizing compressor operation when
heat loads in the conditioned space are lower. Energy
savings is also gained through the use of high efficiency
components such as advanced digital scroll and 4-step
semi-hermetic compressors.
Quality, Rugged Construction
The durable design of the Liebert DS provides a
stable, virtually vibrationless platform for compressor
and fan operation:
Autophoretic® frame coating—protects frame against
corrosion for years of reliable service.
Welded frame—14 gauge steel provides rugged
construction, proven to withstand shipping and handling
through ISTA (International Safe Transit Association)
certified ship testing.
Durable powder coated exterior panels—look good
and stay that way.
Slot and tab sheet metal—for consistent, quality
construction.
Optional double-skin panels—eliminate insulation in the
air stream. This allows for easy panel cleaning.
Optional floorstands—Adjustable standard and seismicrated floorstands allow for installation and connection of
the system prior to the installation of the raised floor.
Available in heights from 6” to 36”, a field installed turning
vane may be specified.
4
Front Access And Serviceability
Save Valuable Floor Space
Total front access provides space and
serviceability benefits not found on
previous models or competitive units.
The Liebert DS can be placed adjacent
to or in back of other equipment or
against a wall or partition.
All key components visible and
accessible—from the front of the unit
for easy maintenance and removal.
Compressors removable from front—
isolated from air stream for easier
maintenance.
Modular Frame
Construction
The unit’s modular frame
construction allows even more
flexibility in meeting specific needs
for installation, energy efficiency and
other special requirements.
Frame can be field-separated into
three sections—enables unit to fit
into small elevators or through other
tight spaces.
5
When You Need Flexibility In
Cooling Configurations
The Liebert DS provides a complete environmental
control package, including both precision air
conditioning as well as humidity control—no matter
what the temperature is outside. Both upflow and
downflow configurations are available to cover raised
floor and non-raised applications.
The Liebert DS product line has been designed to
cover the widest possible range of application
requirements. These include choice of airflow
configuration, cooling method options and many
other selections that will create the most effective and
efficient system for your facility.
Liebert DS Downflow
Liebert DS Units Can Be Configured For
Optimum Cooling Of Any Type Of Space
Downflow configurations are designed for use in raised
floor applications such as data centers and other facilities
housing sensitive electronic equipment. The Liebert DS
downflow configuration combines top air return with
bottom air supply to circulate air underneath the floor.
Upflow units can be specified in situations where the
floors are not raised, such as communications facilities,
industrial control rooms and laboratories. These units
can supply air directly into the room or be connected
to distribution ductwork.
Compressorized Systems Offer
Flexibility, Efficiency, Reliability
Long recognized as the standard in environmental
control systems for data center operations, Liebert DS
Liebert DS Upflow
compressorized systems are built to the highest
specifications in the industry with proven components
and design. They feature direct expansion operation in
four types of cooling configurations: air cooled, water
cooled, glycol cooled and our exclusive GLYCOOL
free-cooling option.
6
The Widest Variety Of Air Supply Choices
Downflow Supply
Designed for raised-floor applications, the downflow
air supply configuration is commonly found in data
centers and other similar facilities housing sensitive
electronic equipment.
Top Front Supply with Plenum & Grille and
Front Return
In-the-space applications without ductwork, such as
Telecommunications, Networks and Switching Centers,
benefit from this economical configuration. Optional
high filtration may be desirable.
Top Front Supply and Front Return
Engineered for in-the-space applications utilizing duct
work, this airflow design is commonly used for
Telecommunications or Industrial applications. High
static pressure and filtering options may be selected.
Top Rear Supply and Rear Return
Designed for use in out-of-space applications, this
configuration is typical for Industrial Processes such as
Control Rooms, and Labs. Many of these sites will select
a higher static pressure and optional high efficiency
filters. (Customer ducted supply and return)
7
Air Delivery System Designed For Optimized Air
Distribution And Long Service Life
5-YEAR
WARRANTY on
drive components
(bearings, belts,
shaft, pulleys).
Flexibility for
high filtration or
external static
pressures up
to 2.5" (625 Pa).
Centrifugal
blowers enable
performance over
a wide range of air
volume and static
pressure ranges.
Static regain
duct improves
underfloor air
distribution.
Pillow block fan
bearing with
minimum L3 life
of 200,000 hours.
High efficiency
motor meets
NEMA Premium
motor standard.
Computers and other sensitive electronics require greater air volumes than comfort air conditioning can provide. The high
density heat load in the relatively small space of a data center requires more air changes to remove heat properly. A key to the
outstanding performance of the Liebert DS is its optimized air delivery design. It combines high efficiency and effective air
handling to deliver reliable, constant cooling under the most demanding conditions.
Pentadrive™ Blower
system/belt tensioning:
■
Automatic self-tensioning
motor base increases belt life
Special 5-year
Liebert Belt
and reliability of shaft and
bearings.
■
Keeps constant tension on belt.
■
Maintains good sheave and
pulley alignment.
■
Prevents over-tightening.
■
Dual belts for 100%
redundancy.
8
Pentadrive ™ Blower
System
Large capacity fans are dynamically
balanced to minimize vibration and
provide even air distribution. The low
velocity fans use less fan motor energy
and operate more quietly than forced
air blowers. Filtered air at the right
temperature and humidity is fed
positively and evenly into the room.
Intellislot for easy
plug-in of
optional
communication
cards.
Low voltage
terminal strip
provides
connection
flexibility.
Control interface
board for easy
access.
Optional
disconnect switch
available as
non-locking or
locking.
Location for
optional
secondary
disconnect switch
for non-critical
loads.
Deadfront panel
folds down for
easy viewing of
electrical
schematic.
Optional solidstate contactors
used on SCR
reheat for tight
temperature
applications.
Individually-fused components
high-rated fuses for maximum
reliability, high interrupt rating, and
cooler operating fuses for maximum
reliability.
Motors
Electric Panel
The Liebert DS features fan motors
The electric panel of the Liebert DS is designed for easy access to critical
that are optimized for reliability and
electrical and control components.
energy efficiency.
High-efficiency open drip-proof
motor meets National Electrical
Manufacturers Association (NEMA)
Unit Monitoring And Control Options
■
■
Premium motor standard.
Motor Options
Optional TEFC (Totally Enclosed
Fan-Cooled) motors—for rugged
industrial environments.
Optional larger horsepower
motors available—for higher air
volume or higher static pressures.
■
■
■
■
■
Dual float condensate pump—installed in unit, with secondary float to shut down unit and
trigger alarm if high water detected.
Optional low voltage terminal package—two extra n/o common alarm contacts, two extra
remote shutdown terminals, one main fan auxiliary contact. When connected to an optional water
sensor, shuts down unit and provides dry contact closure.
Smoke sensor—senses the return air, shuts down the unit upon detection, and sends visual and
audible alarm. Dry contacts are available for a remote customer alarm. This smoke sensor is not
intended to function as, or replace, any room smoke detection system that may be required by
local or national codes.
High temperature sensor—alerts users to any high temperature situations within the system.
Senses return air temperature and shuts down unit if temperature exceeds 125°F (51.7°C).
Analog input wiring—includes four customer-accessible analog inputs for sensors provided by
others. The analog inputs accept a 4 to 20 mA signal. Gains Calibration for each input are
programmable from the front panel.
Compressor overload—activates an audible and visual alarm in the event of a
compressor overload.
Main Fan Overload—activates an audible and visual alarm in the event of a motor overload.
9
Dependable, Effective Cooling System
A-frame coil design maximizes coil
area, reduces air velocity, lowers
chance of water blowing off coil,
results in far less turbulence with
superior efficiencies in heat transfer.
Optional polymeric
coating on coils
protects against
corrosion due to
harsh environments.
Draw-through design pulls air
evenly through the cooling
coil, reheat and
humidification systems.
At the heart of the Liebert DS are its cooling system components, each designed to provide maximum reliability.
A-Frame Coil
Refrigeration System Features
This Liebert designed and manufactured A-Frame
coil features a large face area/low face velocity design
for precise control of cooling and dehumidification—
and is designed to optimize heat transfer and
minimize pressure drop.
Each refrigeration circuit includes:
Dual Refrigeration Circuits For
Redundancy
Dual compressors and refrigeration circuits assure
reliability and feature automatic sequencing for even
wear of components.
Components include dual compressors and dual
refrigeration circuits enabling the system to operate
even if one circuit fails.
Pump-down evacuation of refrigerant from
compressor crankcase shields the compressors from
the “hard starts” that can shorten their life.
10
Sight glasses serve as a means of quick visual inspection
to determine if there is moisture in the system and if the
system is properly charged.
Refrigerant dehydrators assure a moisture-free
refrigerant system for extended component life.
Expansion valves – Externally equalized expansion
valves smoothly control refrigerant flow during indoor
heat loads and outdoor ambients by controlling
evaporator superheat.
Muffler – Specially engineered mufflers afford a quiet
pulsation-free refrigeration system.
Safety controls – Each compressor has an automatic
reset high pressure switch which locks-out after the third
trip. A low pressure transducer protects against coil
freezing and low refrigerant pressure.
Hybrid Designs Deliver
Maximum Energy Efficiency
Optional 70/30 Cu/Ni free-cooling coil
must be specified to prevent tube
corrosion when used with a cooling
tower loop or other open water system.
Provides
redundancy
and energy
savings for
increased ROI.
Optional econo-coil
rests on an
A-frame coil to
minimize air
pressure drop and
increase efficiency.
Dual Cooling coil increases availability
by using building chilled water as
primary, compressor as back-up.
For even greater efficiency and reduced operating costs, Liebert offers energy saving alternatives such as our GLYCOOL and Dual Cool options. Used
where the climate permits, a conventional air or water cooled direct expansion system adds a second cooling coil which utilizes a building chiller
supply to reduce compressor operation.
GLYCOOL ™ System
Dual Cool
The Liebert GLYCOOL freecooling system incorporates a conventional glycol
cooled unit along with the addition of a second cooling coil, control valves
and a comparative temperature monitor. This allows the system to take
advantage of cooler outdoor temperatures to reduce or eliminate
compressor runtime. During colder months, the glycol solution returning
from the outdoor drycooler is routed to the second coil by a pre-piped
modulating three-way valve. Located upstream of the evaporator coil, the
second coil becomes the primary source of cooling for the room. This coil is
sufficiently sized to offer the identical cooling capacity as is obtained during
the refrigeration cycle of both compressors.
Utilizing this option, a conventional air cooled Liebert DS is
converted to a dual source cooling system by the addition
of a second coil that utilizes a central building chiller supply.
Using a modulating control valve and a comparative
temperature sensor, the unit can function either as a
chilled water system, as a compressorized system—or a
combination of both.
During times when the chiller supply is available,
compressor operation is eliminated, reducing energy costs.
Switchover between the two cooling modes is performed
automatically by a microprocessor control and temperature
sensor. In addition to energy efficiency, this option can
provide increased redundancy and flexibility to the
environmental control system.
11
Controlling The Critical Environment
A key to the ability of a quality
Mission Critical Cooling system to
control conditions within the critical
space is its high “sensible heat ratio.”
Unlike people, computers generate dry
or “sensible” heat, but not humidity.
With a large percentage of their total
capacity devoted to the removal of
moisture, comfort systems can lower
room humidity far below acceptable
standards for electronic equipment—
and they have no provisions for
adding moisture.
To correct this situation, precision air
conditioning systems typically have a
high ratio of sensible-to-total cooling
capacity to remove heat from the air.
Standard
Infrared
Humidifier
Humidifier makeup valve controls
flow of water to
the humidifier
pan.
This capability is provided through the
use of integrated humidification
systems to provide the necessary level
Pure water vapor
provides most
effective
humidification.
Does not depend
on water quality.
High-intensity
quartz lamps shine
on water creating
instantaneous
moisture using
almost any water
quality.
of moisture control, higher air supply
Humidity Control
capacity and larger coil size.
Maintaining the correct humidity level in the room is just as important as
maintaining proper temperature. Inadequate humidity control can cause static
electricity if it’s too dry—or condensation that can corrode circuitry if the air is
too moist. The Liebert DS utilizes an integrated humidification system to provide
the necessary level of moisture control.
Standard Infrared Humidifier
Instant Humidification—on when needed, off when not needed.
Optional Steam Generating Canister Humidifier
Utilizes replaceable bottle—requires a specific water quality level for
optimum operation.
Utilizes a drain and refill cycle—to maintain a current setpoint.
Dehumidification Control
The compressors operate at full capacity during dehumidification. The precision
control of the Liebert DS saves energy by tightly regulating compressor
operation and avoiding over-dehumidification that causes the humidifier to
come on when not needed.
12
Natural air-gap.
No need for backflow prevention.
Filtration System
The Liebert DS features integral air filtration to protect
against airborne contaminants within the critical
environment. Without proper air filtration, even small
amounts of dust and other particles can damage storage
media and charged electronic components.
High-efficiency air-filtration—removes damaging
particles from air.
Standard filter—4” deep, Merv 8. (45% ASHRAE 52.1).
Optional high-efficiency filter—4” deep, Merv Merv 11
(60-65% ASHRAE 52.1)
Optional 2” Merv 7 pre-filter with 2” Merv 11 filter.
V bank filter arrangement—reduces air pressure
drop, top filter access.
Autoflush system
reduces build-up
of mineral
deposits and
impurities in the
water pan.
High water float
switch shuts down
humidifier upon
high water.
Bypass air slots
ensure that
moisture can be
introduced into
air stream.
Cleanable
stainless steel
humidifier pan.
Removable from
front.
Reheat Function
The reheat function of the Liebert DS is primarily used to keep the temperature
from going too low during the dehumidification cycle.
Standard Reheat
Three-stage electric reheat—low watt-density, 304 stainless-steel
fin-tubular reheat, location maximizes airflow to maximize element life
and improve reliability.
Minimum Efficiency Reporting Value (MERV), adopted by
ASHRAE in its 52.2 standard.
Reheat Options
SCR electric reheat—For specialized applications
requiring tight temperature control. Multiple pulses of
reheat vs. three equal stages provide smooth
temperature adjustment.
Optional hot water reheat—Uses existing building
hot water, saving energy.
Reheat/humidifier lockout—Reduces power
requirements during emergency power operation.
13
A Choice Of Compressors Offers Higher Efficiency,
Adaptability And Reliable Operation
Cumulative Compressor Cycles
It Starts With Reliable Scroll
Compressor Technology
As Load Grows From 50% To 100%
The Standard Scroll Compressor:
Rugged, Quiet, Efficient
60% Load
80% Load
70% Load
Single Compressor
120000
100000
Two Compressors
80000
60000
40000
4-Step System
20000
The standard scroll compressor offers efficient, reliable
performance with a robust design that contains only a
few moving parts. Quiet operation is accomplished
through a continual, smooth compression process.
Discharge gas and vibration are kept at a low level.
The Digital Scroll Compressor: A New
Standard For Performance and Reliability
Digital Compressor
0
Year 1
Year 2
Year 3
■
■
Digital Scroll
Capacity Control
Diagram
Greater energy savings—variable capacity system allows
maximum load tracking for higher efficiency.
Improved reliability—by reducing compressor cycling
and component wear.
Improved performance—the compressor can easily
adapt to changing load conditions, providing precise
temperature control.
50% Load
100%
capacity
7.5 secs
7.5 secs
Digital Scroll Capacity adapts as load changes
Future Load
0%
capacity
15 secs
5 secs
100%
Initial Load
33% Load
10 secs
15 secs
14
Year 4
Increasing compressor cycling takes a toll on compressor life.
Liebert Four-Step Semi-Hermetic compressors and Digital
Scroll compressors automatically adjust to yearly increases
in heat load, providing significantly greater component life
than other compressor technologies.
The exclusive digital scroll compressor option on the Liebert
DS utilizes the latest control technology to deliver precise
operation and significantly higher energy efficiency. In
addition to the advantages of the dependable scroll design,
Digital Scroll technology provides infinitely variable
capacity modulation that enables the output to precisely
match the changing cooling demands of the room. This
approach is as much as 30 percent more efficient than
traditional hot-gas bypass. Benefits include:
■
90% Load
140000
Cumulative Compressor Cycles
The scroll compressor design provides high efficiency,
low sound levels and excellent durability. The Liebert DS
precision cooling system is available with either:
■ A standard fixed-capacity scroll compressor.
■ An optional Digital Scroll compressor with energy
saving, variable capacity operation.
10%
Capacity
Load
Four-Step Semi-Hermetic Compressors:
Proven Performance
New Refrigerants To Meet Government Regulations
The Liebert DS Four-Step system achieves high levels
cooling equipment could become obsolete and “out of compliance.” The
of energy efficiency through the integration of two
Montreal Protocol and EPA Clean Air Act require cooling equipment
high-efficiency semi-hermetic compressors with
manufacturers to switch to environmentally-friendly refrigerants by 2010.
capacity control valves, an advanced microprocessor
■
Without the ability to utilize newer environmentally-friendly refrigerants, your
control system and a computer-optimized cooling coil.
R-407C is Liebert’s choice for optional environmentally-friendly refrigerant to
meet future environmental standards. This is the best fit for Liebert
applications, with near drop-in replacement.
The Four-Step system reduces compressor cooling
capacity and energy consumption during periods of
low room load conditions. As a result, four distinct
■
R-22 is the standard refrigerant offered in the Liebert DS.
■
Field conversion from R-22 to R-407C refrigerant is most practical for
scroll compressors. Some R-22 systems use mineral oil, while R-407C
stages of cooling are activated to more closely
refrigerants utilize POE (polyolester) oil. Therefore, a complete system
respond to changing room conditions. Reliability is
clean-out may be required.
enhanced by fewer and less stressful compressor
starts for reduced wear.
Energy Savings
100% 100%
88%
75%
76%
50%
38%
25%
Step Four
Step Three
Capacity
Step Two
Energy
Step One
Energy Savings
4-Step Compressor Operation Improves
Saturated Condensing Temperature
Energy Efficiency Ratio
105°F
18.1
20.1
22.4
110°F
16.4
18.2
20.1
115°F
15.1
16.7
18.4
120°F
13.8
15.2
16.7
125°F
12.8
14.0
15.4
130°F
11.7
12.8
14.0
45°F
50°F
55°F
Semi-Hermetic Compressors
Saturated Evaporator Temperature
15
Liebert
Removable display makes
troubleshooting servicing easier.
Small Graphic Display
The standard Small Graphic Display features a 128x64 dot matrix backlit screen.
Advanced monitoring can be achieved with the addition of the Optional Wall
Mounted Display.
Parts list available on control
for easier maintenance.
The Liebert iCOM control system featured on the Liebert DS brings high-level
supervision to multiple units allowing them to work together as a single
system to optimize room performance. The Liebert iCOM control system
offers a variety of advantages.
Intelligent Communications And Monitoring
Monitors all key system functions
and reports to alarm, if needed.
■
Saves Energy using Predictive Humidity Control.
■
Built-in Lead/Lag Functions for enhanced system reliability.
■
Wellness Calculation alerts service personnel before problems occur.
■
Unit to Unit Communications allows Lead/Lag and optional teamwork
settings for maximum flexibility of control.
On-board Unit Diary provides a
maintenance history to any
authorized user.
16
The Optional Wall
Mounted Large
Graphic Display
provides
centralized
monitoring and
control of
connected Liebert
DS units.
The optional vNSA with iCOM
combines a Wall Mounted Large
Graphic Display along with a network
switch to facilitate U2U wiring in one
convenient cabinet.
Additional Views Available with Large
Graphic Displays
■
System View—Allows you to see the average operation
of the “system” or all units that are working together in
Unit to Unit (U2U) Communication mode for Teamwork
or Lead/Lag from a centralized location.
■
Spare Parts List—Critical spare part numbers are saved
in unit memory and may be displayed on the Large
Graphic Display, speeding identification of parts.
■
Unit Diary—Free field area within the unit memory
where unit maintenance shares history with any
Maintenance/
Wellness Set-up
Large Graphic Display
authorized users or logged-in service contacts, including
record of what others have done.
The optional
Large Graphic
Display features a
320x240 dot
matrix backlit
screen with
helpful system
and maintenance
views.
Spare Parts
Unit Diary
Standby Settings (Lead/Lag Set-up)
U2U Configuration 2
Teamwork: Mode 2
Liebert DS units with Small Graphic Display may be centrally monitored and
controlled with the Optional Wall Mounted Display.
Units work together to provide precision
cooling in rooms with unbalanced loads.
17
Paradenser ™ Cleanable Condenser Provides Liebert DS
With Longer Service Life
The Liebert DS mission-critical cooling
system offers the new Paradenser
■
degrade heat rejection performance and result in cooling system shutdown.
condenser for use in water/glycol
Large water passages prevent plugging and allow for conventional tube
systems. This patented component
utilizes a counter-flow design and
Fully cleanable—eliminates costly condenser failures due to plugging and
providing a longer service life. This reduces fouling and scaling which can
™
cleaning methods.
■
Sturdy, corrosion-resistant materials—Steel shell, copper tubes, and
nickel-plated plug are durable, non-corrosive and easy to clean.
features a shell and tube type
■
construction.
Shell side of the condenser acts as a receiver—holds refrigerant charge
during pumpdown.
■
Works equally well with either R-407C or R-22 refrigerants—high
velocity refrigerant shell eliminates need to upgrade condenser when
changing to alternate refrigerant. Counterflow design and high refrigerant
velocities significantly maintain performance when using R-407C refrigerant.
■
Utilizes no gaskets—offers further reliability by preventing leaks.
Fully cleanable
Paradenser tubes
are located for
convenient
maintenance.
18
Liebert Heat Rejection Systems—Flexibile Configurations
To Meet Application Requirements
Liebert Condensers & Drycoolers
■
horizontal airflows, indoor or outdoor models,
Liebert manufactures its own high-efficiency air cooled condensers and
freestanding or ducted configurations.
drycoolers that are precisely matched to the heat rejection requirements of our
precision air conditioning systems. Constructed with an aluminum cabinet and a
■
Standard units—Sized for maximum outdoor ambient
temperatures of 85 °F (29.4°C) to 105°F (40.6°C).
copper-tube aluminum-fin coil, these exceptionally dependable units are
corrosion resistant and designed to operate for prolonged periods of exposure
Wide range of heat rejection solutions—vertical or
■
Liebert VFD Control Condenser—Features a variable
to the worst weather conditions. Liebert condensers and drycoolers are fully
frequency drive (VFD) and an inverter duty fan motor with
factory wired and tested for easy installation.
ceramic bearings. The VFD control integrates pressure
variations from either compressor operation, including
digital scroll compressors, using pressure transducers and
modulates the condenser fan motor speed to hold
condensing temperatures constant. This system allows
for operation at ambient temperatures as low as
-20°F (-28.9°C).
■
Fan Speed Control Condenser—A fan-speed control
varies the variable speed fan motor based on compressor
head pressure to maintain constant condensing
temperatures. This system allows for operation at ambient
temperatures as low as -20°F (-28.9°C).
■
Drycoolers, Pumps, Tanks and Controls—Complete
heat rejection solutions for glycol-cooled and GLYCOOL
units consist of drycoolers, glycol pumps, expansion tanks
and integral or separate pump electrical control boxes.
■
Quiet-Line™ Condenser/Drycooler—Operate with the
lowest noise level of any heat rejection available, offering
levels of less than 57 dBA.
■
Indoor Piggyback Condenser/Drycooler—Indoor
condensers/drycoolers designed to provide heat
rejection by ducting air from outside the building, such as
high-rise buildings.
■
Outdoor Centrifugal Condenser/Drycooler—
Centrifugal drycoolers suitable for outdoor or indoor
mounting, providing heat rejection for unique applications
requiring ducted airflow.
■
High Ambient Condensers—Utilize increased coil
surfaces for operation in outdoor climates up to
120 °F (48.9 °C).
19
No Other Precision Cooling System Offers This Much Flexibility
The Liebert DS Has A Solution To Meet Your Critical Needs
Water Cooled
Long recognized as the standard in
environmental control systems for
data center operations, the Liebert
DS is built to the most demanding
specifications in the industry with
proven components and design.
Liebert DS features compressorized
direct expansion operation in air
cooled, water cooled and glycol
cooled configurations, as well as
GLYCOOL™ free-cooling models and
chilled water systems.
Remote
cooling
tower
A-frame
coil
Paradenser
Tubes
Compressors
Centrifugal
Blower
GLYCOOL™ System with free-cooling cool
Glycol
circulating
pump
A-frame coil inside
Econ-ocoil rests
on
A-frame
coil
Liebert
drycooler
Paradenser
Tubes
Compressors
Centrifugal
Blower
Glycol-cooled
condensers
20
Air Cooled
Condenser
with optional
Lee-Temp
Package
Glycol Cooled
Piggyback Heat Rejection Configurations
Glycol circulating
pump
A-frame
coil
Air-cooled or
Glycol-cooled
configurations
available
Fan
Liebert
drycooler
Compressors
Centrifugal
Blower
Coil
21
Stand-Alone Monitoring And Leak Detection Solutions
Autonomous microprocessor controlled modules are
available to provide supervision, control and remote
notification of Liebert precision cooling equipment.
Liqui-tect
410 Point
Leak Detection
Configuration
These stand-alone devices include:
Liebert Universal Monitor
The Liebert Universal Monitor is an all-purpose, easy- touse microprocessor-based monitoring panel with
connections for up to 8 digital inputs, 8 digital outputs and
4 analog inputs. Designed to bring critical monitoring
information directly to your facility or offsite location, the
Liqui-tect
460 Zone
Leak Detection
Configuration
unit includes an on-board modem to provide remote
monitoring while minimizing configuration and installation
requirements. It features a built-in LCD user interface,
making the panel self contained and accessible without
additional hardware and software.
Contact Closure Alarm Panels
The Liebert RCM series of contact closure alarm panels
provides customized alarm indication at a single location
Liebert Leak Detection Modules
for any dry contact input from environmental, power and
Liebert Liqui-tect® leak detection systems provide
UPS systems, including Liebert units. These remote
quick sensing and accurate reporting of leaks below
systems continuously monitor your most critical support
the floor or above the ceiling in critical facilities.
equipment and instantly alert you to alarm conditions.
These reliable systems provide immediate warning
Three different system configurations are available for
and precise location, allowing you to find and
monitoring up to eight points with communications and
correct a leak before moisture can damage computers,
pager interface plus eight digital outputs.
wiring connections or other sensitive electronics.
Temperature and Humidity Recorder
A seven-day temperature and humidity recorder permits
close examination of computer room environment
condition and can be used as a permanent record of the
environmental control system's operation efficiency.
Liebert Universal Monitor
22
Maximizing Your Investment Through Adaptive Monitoring
Distributed Management
with Liebert IntelliSlot
Interface Cards
Centralized Management
with Liebert Nform
Software
Enterprise Management
with Liebert SiteScan ®
Web Software
For enchanced remote communications
and control of your Liebert units, the
Liebert IntelliSlot Web Card will deliver
SNMP and web-management
communications capabilities.
As business grows, your critical
equipment infrastructure will expand,
thus the need for centralized
management of this equipment will be
key to your business success.
Connecting to equipment in the
distributed critical space is only part of
the monitoring challenge.
For customers who require extensive
management of critical system
equipment that may span multiple
locations in an ever-moving global
enterprise, Liebert SiteScan Web will
centrally manage your critical
equipment and give you the power to
move beyond the event-responsive
service paradigm.
Monitoring and control through
your existing Network with no
additional software required.
Each Liebert system equipped with
an Liebert IntelliSlot Web Card takes
full advantage of your Ethernet
network, allowing remote monitoring
from your computer desktop, network
operations center or wherever
network access is permitted, without
the need for front-end software.
The Liebert IntelliSlot Web Card
supports 10 and 100 MBit Ethernet
network transmissions speeds, which
will be auto-detected upon
connection to the network. Plus,
these cards support in-the-field
firmware updates.
Liebert Nform leverages the
network connectivity capabilities of
your Liebert equipment to provide a
centralized monitoring view of your
distributed equipment.
Utilizing the SNMP and Web
technologies built into each of the
Liebert IntelliSlot communication cards,
Nform will centrally manage alarm
notifications to provide you with an easy
interface to access critical status
information. Liebert Nform puts critical
systems information at the fingertips
of support personnel—wherever they
are—increasing responsiveness to alarmevent conditions, thus allowing IT
organizations to maximize their
system availability.
Liebert SiteScan Web does it all—
■ Real-Time Monitoring and Control
■ Event Management and Reporting
■ Data Analysis and Trending
■ Building Management Integration
Liebert SiteScan Web is a comprehensive
critical systems management solution
dedicated to ensuring reliability through
graphics, event management and data
extrapolation. The standard Web
interface allows users easy access
from anywhere at anytime.
■
■
■
■
■
■
Liebert IntelliSlot Web
Single- and multi-site applications.
Event management and unit control.
Trend and historical data captures
and reporting.
Full ASHRAE BACnet compatibility.
Java based.
Windows 2000, XP and 2003
compatible.
Liebert Nform
Liebert SiteScan Web
23
Ensuring The High Availability Of
Mission-Critical Data And Applications.
Emerson Network Power, the global leader in enabling business-critical continuity,
ensures network resiliency and adaptability through a family of technologies—
including Liebert power and cooling technologies—that protect and support
business-critical systems. Liebert solutions employ an adaptive architecture that
responds to changes in criticality, density and capacity. Enterprises benefit
from greater IT system availability, operational flexibility, and reduced capital
equipment and operating costs.
Liebert Corporation
1050 Dearborn Drive
P.O. Box 29186
Columbus, Ohio 43229
800 877 9222 Phone (U.S. &
Canada Only)
614 888 0246 Phone (Outside U.S.)
614 841 6022 FAX
Via Leonardo Da Vinci 8
Zona Industriale Tognana
35028 Piove Di Sacco (PD)
Italy
39 049 9719 111 Phone
39 049 5841 257 FAX
Emerson Network Power Asia Pacific
7/F., Dah Sing Financial Centre
108 Gloucester Rd, Wanchai
Hong Kong
852 25722201 Phone
852 28029250 FAX
liebert.com
24 x 7 Tech Support
800 222 5877 Phone
614 841 6755 (outside U.S.)
While every precaution has been taken to ensure accuracy and
completeness in this literature, Liebert Corporation assumes no
responsibility, and disclaims all liability for damages resulting
from use of this information or for any errors or omissions.
© 2006 Liebert Corporation. All rights reserved throughout
the world. Specifications subject to change without notice.
All names referred to are trademarks or registered trademarks
of their respective owners.
® Liebert and the Liebert logo are registered trademarks
of the Liebert Corporation.
SL-18810 (R11/06)
Emerson Network Power.
The global leader in enabling Business-Critical Continuity™.
Printed in USA
EmersonNetworkPower.com
AC Power
Embedded Computing
Outside Plant
Racks & Integrated Cabinets
Connectivity
Embedded Power
Power Switching & Controls
Services
DC Power
Monitoring
Precision Cooling
Surge Protection
Business-Critical Continuity, Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co.
©2006 Emerson Electric Co.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising