GMC 2016 Yukon Guide

GMC Yukon 2016 boasts a plethora of features to enhance your driving experience. Its customizable driver display provides real-time vehicle information and warnings. The power front seats with memory and lumbar support ensure a comfortable ride. The keyless entry system allows convenient access without a key. The power liftgate, openable with a button or foot sensor, makes loading and unloading a breeze. The 2nd and 3rd-row seats can be folded to create ample cargo space. The rear-seat entertainment system with a DVD player keeps passengers entertained on long journeys.

PDF Download

Document

Getting to Know Your

2016 Yukon Denali/

Yukon XL Denali

www.gmc.com

Review this Quick Reference Guide for an overview of some important features in your GMC Yukon Denali or Yukon XL Denali.

More detailed information can be found in your Owner Manual.

Some optional equipment described in this guide may not be included in your vehicle. For easy reference, keep this guide with your Owner Manual in your glove box.

Instrument Panel

Illumination

Control/Exterior

Lamp Control

4WD

Control F

Integrated

Trailer Brake

Control

Traction Control and StabiliTrak/

Front and Rear Parking Assist/Lane

Keep Assist/Adjustable Pedals/

Power Assist Step F Buttons

Turn Signal/

Windshield

Wipers Lever

Driver

Information

Center

Cruise Control/

Collision Alert/

Heated Steering

Wheel Buttons

Audio Next/

Previous Favorite

Station Controls

(behind steering wheel)

Tilt/Telescopic

Steering Wheel

Control

Voice Recognition

Buttons/Driver

Information Center

Control Pad

Audio Volume

Controls (behind steering wheel)

Symbols

Low Fuel

Traction Control Off

Lane Keep Assist

Warning

Brake System

Cruise Control Set

StabiliTrak Active

StabiliTrak Off

Security

Tow/Haul Mode

Lights On Reminder

Airbag Readiness

Tow/Haul

Button

GMC

IntelliLink

Radio

Climate

Controls

Engine

Start/Stop

Button

Driver’s Heated/

Cooled Seat

Buttons

Storage

Compartment with

Accessory Power

Outlet/USB Ports

Rear

Climate

Controls

Passenger’s

Heated/Cooled

Seat Buttons

Check Engine

Antilock Brake

System

Low Tire Pressure

F Optional equipment

Door Ajar

Oil Pressure

Charging System

Safety Belt Reminder

Refer to your Owner Manual to learn about the information being relayed by the lights, gauges and indicators on the instrument cluster.

See In Brief in your Owner Manual.

Remote Keyless Entry Transmitter (Key Fob)

Unlock

Press to unlock the driver’s door.

Press again to unlock all doors.

Lock

Press to lock all doors.

Note: Press and hold the Lock/Unlock buttons to automatically fold/unfold the power mirrors.

To change the Auto Mirror Folding setting, go to

Comfort and Convenience in the Vehicle Settings menu.

Liftglass

Press twice to open the liftglass.

Power Liftgate

Press twice to open or close the power liftgate.

Vehicle Locator/Panic Alarm

Press and release to locate your vehicle.

The turn signal lamps will flash and the horn will sound.

Press and hold to activate the alarm. The turn signal lamps will flash and the horn will sound until the button is pressed again or the ignition is turned on.

Remote Vehicle Start

Press and release the Lock button and then press and hold the button until the turn signal lamps flash (about

4 seconds) to start the engine from outside the vehicle. After entering the vehicle, turn on the ignition.

• During a remote start, the engine will run for 10 minutes.

• Remote Start can be extended once by repeating the remote start procedure.

• Press and hold the button until the parking lamps turn off to cancel a remote start.

• The heated/cooled seats will turn on during a remote start (if selected in the

Vehicle Settings menu) when outside temperatures warrant.

Note: To program the remote lock, unlock, and remote start settings, go to Remote Lock, Unlock,

Start in the Vehicle Settings menu.

See Keys, Doors and Windows in your Owner Manual.

Power Liftgate

Open/Close the Power Liftgate

Press the Power Liftgate button on the RKE transmitter twice.

Press the Power Liftgate knob on the overhead console.

Press the touchpad on the liftgate handle to open the liftgate.

Press the button next to the liftgate latch to close the liftgate.

Hands-Free Operation

To open or close the liftgate hands-free, kick your foot straight in and out under the center of the rear bumper. Do not swing your foot side-to-side. The RKE transmitter must be within 3 feet of the liftgate.

4 F Optional equipment

Programming the Liftgate Height

1. Turn the Power

Liftgate knob to the

3/4 mode position.

2. Open the liftgate.

3. Adjust the liftgate manually to the desired height.

4. To save the setting, press and hold the button next to the liftgate latch for

3 seconds. The turn signals will flash when the setting is saved.

See Keys, Doors and Windows in your Owner Manual.

Keyless Entry System

The Keyless Entry System enables operation of the doors and ignition without removing the Remote Keyless Entry transmitter from a pocket or purse. The transmitter must be within 3 feet of the door being unlocked or the liftgate.

Keyless Unlocking

With the transmitter within range:

Press the lock button on the driver’s door handle to unlock the driver’s door; press it again within 5 seconds to unlock all doors.

Press the lock button on a passenger door handle to unlock all doors.

Press the touchpad on the liftgate handle to open the liftgate.

Keyless Locking

With the ignition off, the transmitter out of the vehicle, and all doors closed:

Press the lock button on any door handle to lock all doors immediately.

If Passive Locking is turned on, all doors will lock automatically after a short delay once all doors are closed.

Note: To program the door lock and unlock settings, go to Remote Lock, Unlock, Start in the Vehicle

Settings menu.

See Keys, Doors and Windows in your Owner Manual.

Pushbutton Start

Starting the Engine

With the vehicle in Park or Neutral, press the brake pedal and then press and hold the ENGINE START/STOP button to start the engine.

Note: The transmitter must be in the vehicle to turn on the ignition. If the transmitter battery is weak, place the transmitter in the pocket in the center console to enable the engine to start. Replace the transmitter battery as soon as possible.

Stopping the Engine

Shift to Park and press the ENGINE START/STOP button to turn off the engine.

Accessory

With the engine off and the brake pedal NOT depressed, press the ENGINE START/

STOP button to place the ignition system in the accessory position.

See Driving and Operating in your Owner Manual.

F Optional equipment 5

Power Front Seats

Seat Adjustments

A. Seat Cushion Adjustment

Move the front horizontal control to move the seat forward or rearward, or to tilt, raise or lower the seat.

B. Seatback Adjustment

Move the vertical control to recline or raise the seatback.

C. Lumbar Adjustment

Move the rear control fore/aft to increase/decrease lumbar support or up/down to raise/lower the lumbar location.

Set Memory Positions

1. With the vehicle in Park and the ignition on, adjust the power driver’s seat, power adjustable pedals, power outside mirrors, and power tilt/telescopic steering column to the desired positions.

2. Press and release the SET button and then press and hold button 1 on the driver’s door until two beeps sound.

3. Repeat the steps using button 2 for a second driver.

Set Exit Position

1. With the vehicle in Park and the ignition on, adjust the power driver’s seat, power adjustable pedals power, and power tilt/telescopic steering column to the desired positions.

2. Press and release the SET button and then press and hold the Exit button on the driver’s door until two beeps sound.

Recall Positions

With the ignition on and the vehicle in Park, press and release button 1 or 2 or the

Exit button to recall the stored position.

With the vehicle off or not in Park, press and hold button 1 or 2 or the Exit button until the stored position is reached. Releasing the button before the stored position is reached cancels the recall.

The memory/exit positions can be programmed to be recalled automatically when the ignition is turned on/off (for exit recall, the driver’s door must be opened).

To set the Auto Memory Recall or Easy Exit Options, go to Settings > Vehicle > Comfort and Convenience > Auto Memory Recall or Easy Exit Options.

See Seats and Restraints in your Owner Manual.

6 F Optional equipment

Rear Seats

Folding 2nd-Row Seats

The 2nd-row seats fold and tumble to provide more cargo space and access to the

3rd-row seats.

1. Lower the head restraint, unbuckle the safety belt, make sure nothing is under or in front of the seat, and move the front seat forward enough to allow room for the folded seat.

2. Lift the lever on the lower outboard side of the

2nd-row seat. The seatback will fold forward.

3. Lift the lever again to tumble the seat forward.

Power Folding 2nd-Row Seats

1. Lower the head restraint, unbuckle the safety belt, make sure nothing is under or in front of the seat, and move the front seat forward enough to allow room for the folded seat.

2. Press the Seat Release button (A) on the panel behind the rear doors or the x2 button (B) in the rear cargo area to fold the seat forward. Press either button again to tumble the seat forward.

Unfolding 2nd-Row Seats

1. Pull down the seat until it latches to the floor.

2. Lift up the seatback until it locks in place.

Power Folding/Unfolding 3rd-Row Seats

1. With the vehicle in Park, lower the head restraint, unbuckle the safety belt, and make sure nothing is on the seat.

2. Press and hold the bottom of the Seat

Release button (C) in the rear cargo area to fold the seat flat.

3. Press and hold the top of the button to raise the seatback.

B C

See Seats and Restraints in your Owner Manual.

F Optional equipment 7

Customizable Driver Display

The Customizable Driver Display on the instrument cluster displays a variety of vehicle system information and warning messages.

Menu Items

Use the control pad on the right side of the steering wheel to view the following menus:

Info – display trip and fuel information

Audio – browse music or change the audio source

Phone – view active call or recent calls and scroll through contacts

Navigation – view active route or change voice prompts

Settings – display units, info pages settings and set a speed warning

Display/Select Menu Items

Press the or button to move between the display zones.

Press the or button to move through the menus.

Press to open a menu or select/deselect a setting.

Reset an Item

1. Use the control pad to display the item.

2. Press and hold to reset or clear the item.

Changing Display Themes

The Customizable Driver Display features three display themes: Standard, Technology, and Media. The style of the display will change depending on the selected theme.

1. Use the control pad to display the Settings menu.

2. Select Display Theme.

3. Select the desired theme.

See Instruments and Controls in your Owner Manual.

Head-Up Display

The Head-Up Display (HUD) projects some operating information onto the windshield.

The HUD controls are located on the left side of the instrument panel.

HUD HUD

Lift up or press down to adjust the position of the image on the windshield. It cannot be adjusted side-to-side.

INFO

Press to select a display view.

+ –

Lift up or press down to brighten or dim the display. Hold down to turn off the display.

See Instruments and Controls in your Owner Manual.

Audio Steering Wheel Controls

Push to Talk

Press to answer an incoming call or to use natural voice recognition with the audio,

Bluetooth or navigation system.

Press and hold to activate voice pass-thru or Siri® Eyes Free.

End Call/Mute

Press to end or reject a call.

Press to mute/unmute the vehicle

speakers.

Next/Previous

With the Audio screen displayed on the

Next/Previous Favorite Station button shown. Volume button is located behind the right side of the steering wheel.

F Optional equipment

Volume

(behind right side of steering wheel)

Press the top or bottom button to adjust the volume.

Next/Previous Favorite Station

(behind left side of steering wheel)

Press the top or bottom button to display the current station or track. Press the top or bottom button again to go to the next or previous favorite radio station or track.

See your Infotainment System Owner Manual.

**GMC IntelliLink Radio with 8-Inch* Color Touch Screen**

Refer to your Owner Manual for important safety information about using the infotainment system while driving.

The GMC IntelliLink radio is controlled by using the audio system buttons and touch screen.

Power/

Volume

Applications:

Touch the screen icon to access the application

Interaction

Selector:

Touch to display the favorites list

Additional Pages:

Touch to view additional pages of applications

(if available)

TUNE/MENU:

Tune radio stations/Open and select menus

RADIO:

Select AM,

FM, XMF

MEDIA:

Select the media source

Open/Close the storage compartment

SEEK:

Previous/Next radio station or track

Eject disc

BACK:

Move back one level in the menus

Home screen

GMC IntelliLink uses a Bluetooth or USB connection to link to a compatible device, such as a smartphone, cell phone, USB flash drive or portable audio player/iPod ® . IntelliLink enables streaming audio through a smartphone and hands-free voice control. For assistance with the IntelliLink system, contact Customer Assistance at 1-855-4-SUPPORT

(1-855-478-7767) or visit www.gmc.com and click the For Owners tab.

10 F Optional equipment *Screen measured diagonally See your Infotainment System Owner Manual.

**GMC IntelliLink Radio with 8-Inch* Color Touch Screen**

Setting the Time

1. Touch Settings on the home page.

2. Touch Time and Date.

3. Touch Set Time.

4. Touch the arrows to adjust the hours, minutes and AM or PM.

5. Touch BACK to exit the menu.

Storing Favorites

Up to 60 radio stations from all bands (AM, FM or XM F ), media (song, artist, album, and genre with device connected to a USB port), phone contacts and navigation destinations can be stored in any order.

1. Select the desired radio station, media favorite, navigation destination or contact.

2. Touch and drag up the Interaction Selector at the bottom of the screen to display the favorite screen buttons.

3. Touch and hold one of the favorite screen buttons until a beep is heard, indicating it is stored.

4. Repeat the steps to store another favorite item.

To change the number of favorites displayed, go to Radio in the Settings menu.

Managing Home Page Icons

The home page icons (A) can be arranged in any order.

1. Press the Home button.

2. To enter edit mode, touch and hold the home page icon to move.

3. Continue holding the icon and drag it to the desired position, and then release.

4. Press the Home button to exit edit mode.

Apple CarPlay™ F

Apple CarPlay capability may be available through a compatible smartphone. If available, a Projection icon will appear on the home page of the infotainment display.

1. Connect your compatible Apple iPhone to a USB data port in the console front storage bin or inside the console. Use your device’s factory-provided USB cable. Aftermarket cables may not work.

2. The Projection icon will change to Apple CarPlay, depending on the phone. Apple

CarPlay may launch automatically upon USB connection. If not, touch the Apple

CarPlay icon on the home page.

For more information on using Apple CarPlay, call 1-855-4-SUPPORT (1-855-478-7767) or visit my.gmc.com/learn.

See your Infotainment System Owner Manual.

F Optional equipment *Screen measured diagonally 11

GMC IntelliLink

Natural Voice Recognition

Control the music source and make phone calls hands-free (after pairing your Bluetoothenabled phone) using the natural voice recognition system.

1. Press the Push to Talk button on the steering wheel.

2. The radio will say “Command please,” followed by a beep.

3. After the beep, say what you want it to do using natural speech.

(Example: “Call Amanda” or “Tune FM 104.3.” Say “Help” for assistance.)

PANDORA ® Internet Radio

Listen to personalized radio stations based on favorite artists or genres.

Download the Pandora app to your smartphone. Restart the smartphone and sign in to Pandora.

Create a station on your phone to listen to a customized song list in the vehicle.

Connect your smartphone/device to the system by Bluetooth or, for Apple devices, by a USB cable.

Touch the Pandora icon on the touch screen to access Pandora. A slight delay may occur when loading a song or changing a station.

Voice Pass-Thru and Siri ® Eyes Free

Voice pass-thru allows access to the voice recognition commands on a paired cell phone; i.e. Siri or Voice Command. For more information, visit www.gmc.com and click the

For Owners tab.

To activate voice pass-thru, press and hold the Push to Talk steering wheel button.

Text Message Alerts

Text message alerts play a text message over the audio system and allow a response with a preset message. The text messaging feature must be set up when the cell phone is paired. Messages can be viewed on the touch screen only when the vehicle is not moving.

Touch Text to view the text message inbox.

See your Infotainment System Owner Manual.

Portable Audio Devices

Accessory power outlets and USB ports are located in several locations in the vehicle to connect portable audio devices.

An iPod ® , iPhone ® , MP3 Player, a USB flash drive or a USB mass storage device can be connected to the USB port. GMC IntelliLink will read the device and build a list of songs. Search for music on-screen or by voice commands.

Press the MEDIA button to select a portable device as the audio source.

See your Infotainment System Owner Manual.

Bluetooth® System

Refer to your Owner Manual for important safety information about using the Bluetooth system while driving.

Before using a Bluetooth-enabled device in the vehicle, it must be paired with the in- vehicle Bluetooth system. The pairing process is disabled when the vehicle is moving.

Not all devices will support all functions. Visit my.gmc.com/learn for more information.

Pair a Phone

“Pair phone,” or use the MENU knob or the touch screen to select the Phone icon >

Phones > Pair Device.

2. Start the pairing process on the phone. Locate GMC IntelliLink on the phone.

3. Enter the four-digit code that appears on the touch screen into the phone or, if a sixdigit code appears on the phone, confirm it on the touch screen.

4. If your phone prompts you to accept the connection or phone book download, select

Always Accept and Allow.

Streaming Audio

With a paired device connected via Bluetooth, press the MEDIA button until Bluetooth is displayed on the touch screen to stream audio from the device. Control audio operation using the device controls. For full control of the device, connect it to a USB port.

See your Infotainment System Owner Manual.

Wireless Charging

The Wireless Charging system is located on the storage tray on top of the center console.

To check mobile device compatibility, visit my.gmc.com/learn. See your phone retailer for details on required phone accessories.

1. The vehicle must be on or Retained Accessory Power must be active.

2. Remove all objects from the charging pad.

3. Place the device, face up, on the symbol on the pad, aligned with the rear rib.

4. Move the device slowly until the battery charging symbol displays on the infotainment screen. If not charging, remove the device for 3 seconds, and rotate it 180 degrees.

See your Infotainment System Owner Manual.

OnStar® with 4G LTE

With OnStar 4G LTE and a Wi-Fi® hotspot, up to seven devices (smartphones, tablets and laptops) can be connected to a reliable, built-in Internet connection.

To retrieve the SSID and password for the hotspot, press the OnStar Voice

Command button on the rearview mirror, wait for the prompt, and then say “Wi-Fi

settings.” The information will be displayed on the screen.

For assistance or to change the SSID and password, press the blue OnStar button or call

1-888-4ONSTAR (1-888-466-7827).

Note: See onstar.com for a detailed instruction guide, vehicle availability and system limitations.

F Optional equipment

See your Infotainment System Owner Manual.

Vehicle Personalization

Some vehicle features can be customized using the audio controls and menus or the touch screen buttons.

Changing Vehicle Settings

The Vehicle Settings menu may include

Climate and Air Quality, Collision/Detection

Systems, Comfort and Convenience,

Lighting, Power Door Locks, or Remote

Lock/Unlock/Start.

Use the MENU knob or the touch screen to:

1. Select Settings on the home page.

2. Select Vehicle.

3. Select the desired menu item.

4. Select the desired feature and setting.

Settings are saved automatically.

5. Select BACK to exit each menu.

See Instruments and Controls in your Owner Manual.

Driver Assistance Systems

The driver assistance systems use advanced technologies to help avoid collisions by

providing visual and audible alerts under some imminent collision conditions.

Forward Collision Alert – The Vehicle Ahead indicator will illuminate in green on the instrument cluster when a vehicle is detected and will illuminate in amber when following a vehicle ahead too closely. If your

vehicle approaches another vehicle too rapidly, the will flash, a visual alert will flash on the windshield and the Safety Alert Seat will pulse. See Safety Alert Seat.

Press the Collision Alert button on the left side of the steering wheel to set the alert sensitivity to

Far, Medium, Near, or Off. The setting is displayed in the Driver Information Center.

Safety Alert Seat – The driver’s seat pulses, left side, right side, or simultaneously, to alert the driver of potential hazards.

Audible notification may be selected instead of

Safety Alert Seat pulsing notification. To change the alert setting, go to Settings > Vehicle > Collision/

Detection Systems > Alert Type.

See Driving and Operating in your Owner Manual.

Driver Assistance Systems

Lane Keep Assist with Lane Departure Warning F – The Lane Keep Assist indicator is green on the instrument cluster when a lane marking is detected. The system may assist by gently turning the steering wheel and display an amber if the vehicle approaches a detected lane marking without using a turn signal in that direction. It may also provide a

Lane Departure Warning alert by flashing an amber and pulsing the left or right side of the Safety Alert Seat as the lane marking is crossed. See Safety Alert Seat.

Press the Lane Keep Assist button on the left side of the instrument panel to turn the system on or off.

Rear Vision Camera – Provides a view directly behind the vehicle when backing up.

To turn the Rear Vision Camera Guidelines or Rear Park Assist Symbols on or off, go to

Settings > Rear Camera.

Rear Cross Traffic Alert – Warns of traffic coming in either direction behind the vehicle by displaying a visual alert on the Rear Vision Camera display and pulses the left or right side of the Safety Alert Seat. See Safety Alert Seat.

To turn the system on or off, go to Settings > Vehicle > Collision/Detection Systems >

Rear Cross Traffic Alert.

Front Automatic Braking ous alerts.

F – Prepares the brakes or applies the brakes and slows the vehicle if an emergency collision appears imminent or the driver does not react to previ-

Side Blind Zone Alert/Lane Change Alert – While driving, the Side Blind Zone Alert/Lane

Change Alert displays a warning symbol on the left or right side mirror when a vehicle is detected in that side blind zone area or rapidly approaching that side blind zone area. The warning symbol flashes if a turn signal is activated when a vehicle has been detected.

To turn the system on or off, go to Settings > Vehicle > Collision/Detection Systems >

Lane Change Alert.

Front and/or Rear Parking Assist – During low-speed parking maneuvers, the system provides “distance to closest object” information in the Driver Information

Center and a caution symbol on the Rear Vision

Camera display. When the vehicle should be stopped immediately to avoid a collision, a continuous audible tone sounds or the Safety Alert Seat pulses. See Safety

Alert Seat.

To turn the system on or off, press the Parking Assist button on the left side of the instrument panel.

See Driving and Operating in your Owner Manual.

F Optional equipment 15

Automatic Climate Controls

AUTO:

Driver’s Temp.

Control/

Automatic

Operation

A/C/

Air Conditioning

Control/

Recirculation

Mode

Vent

Mode/

Floor

Mode

Fan

Speed

Control/

On/Off

Defog

Mode/

Bi-level

Mode

REAR

Defrost Mode/

Rear Window/

Outside Mirror

Defogger

SYNC:

Passenger’s

Temp. Control/

Link setting to driver’s setting

Driver’s

Heated/

Cooled Seat

Buttons

Rear Power

Control

AUTO:

Rear

Automatic

Operation

Rear Fan

Speed

Rear Air

Delivery

Rear

Temperature

Rear Control

Lock-out

Passenger’s

Heated/

Cooled Seat

Buttons

Automatic Operation

1. Press AUTO.

2. Set the temperature. The system automatically controls the fan speed, air delivery, air conditioning and recirculation to reach the set temperature. Allow time for the system to reach the desired temperature.

If the air delivery mode or fan speed is manually adjusted, automatic operation is turned off.

Sync Temperature Settings

Press SYNC to link the passenger’s and rear climate temperature settings to the

driver’s setting. When the passenger’s or rear climate setting is adjusted, the different temperature setting is displayed.

Rear Climate Controls

Press the Power button to turn the rear climate controls on/off.

Press the button to lock out the rear controls. Rear climate control operation is controlled using the front controls.

16 See Climate Controls in your Owner Manual.

Wipers and Washers

Windshield Wipers

Rotate the band on the lever to activate the wipers.

Rear Wiper

Slide the switch to activate the rear wipers.

Lighting

Dome Lamps

Fast Wipes

Slow Wipes

INT Intermittent

Rotate the band to adjust the delay between wipes. The wipers activate more often as the band is rotated upward.

AUTO – Rainsense™ On/Off

Press to turn the Rainsense wipers on/off.

Use the INT band to adjust the wiper cycling based on the amount of moisture on the windshield. Rotate the band upward to increase the moisture sensitivity setting and the wipers will cycle more frequently.

OFF

Single Wipe

Washer Fluid

Push the paddle forward to spray washer fluid on the windshield.

OFF – INT Intermittent – ON

See Instruments and Controls in your Owner Manual.

Instrument Panel Lighting

OFF

Press to turn off the lamps at all times, even when a door is open.

DOOR

Press to have the lamps turn on

automatically when a door is open.

Press to turn on all dome lamps.

Instrument Panel Brightness

Rotate the thumbwheel on the left side of the instrument panel to adjust the

instrument panel lighting.

See Lighting in your Owner Manual.

Cruise Control

Setting Cruise Control

1. Press the On/Off button. The Cruise Control symbol will illuminate in white on the instrument cluster.

2. When traveling at the desired speed, press the SET– button to set the speed. The symbol will illuminate in green on the instrument cluster.

Adjusting Cruise Control

RES+ Resume/Accelerate

Press to resume a set speed.

When the system is active, press once to increase speed

1 mph; press and hold to continue increasing speed.

SET– Set/Coast

When the system is active, press once to decrease speed

1 mph; press and hold to continue decreasing speed.

Cancel

Press to cancel the cruise control without erasing the set speed from memory.

Pressing the brake pedal also will cancel the cruise control.

The set speed is erased when cruise control or the vehicle ignition is turned off.

Adaptive Cruise Control F

Adaptive Cruise Control enhances traditional cruise control by maintaining a driver-selected following gap between your vehicle and a vehicle detected directly ahead. Once a speed is set, the vehicle will maintain the selected gap distance by braking or accelerating.

When a slower vehicle is detected ahead, the Vehicle Ahead symbol is displayed and the vehicle brakes moderately to maintain the selected following gap. If driver action is required to apply sufficient braking, a visual alert flashes on the windshield and the

Safety Alert Seat pulses.

Selecting the Following Gap

Press the

See Driving and Operating in your Owner Manual.

Power Assist Steps

The power assist steps lower automatically when a door is opened and retract after the doors are closed.

With the ignition on and the vehicle in Park or with the vehicle running and in Neutral, press the Power Assist Steps button on the left side of the instrument panel to deploy the steps for cleaning and car washes. Press the button again to retract the steps.

With the ignition on and the vehicle in Park or Neutral, press and hold the for 4 seconds to lock/disable the steps or to unlock/enable the steps.

button

18 F Optional equipment

See Keys, Doors and Windows in your Owner Manual.

Traction Control and StabiliTrak Systems

The traction control system limits wheelspin and the StabiliTrak ® stability control system assists with directional control of the vehicle in difficult driving conditions. Both systems turn on automatically every time the vehicle is started.

Turn off traction control if the vehicle is stuck and rocking the vehicle is required.

Press the Traction Control/StabiliTrak Off button on the left side of the instrument panel to turn traction control off or back on. The Traction Control Off light will illuminate on the instrument cluster when the system is off.

See Driving and Operating in your Owner Manual.

Integrated Trailer Brake Control (ITBC)

The ITBC system can be used to adjust the amount of power output, or Trailer Gain, available to the trailer brakes. The control panel is located on the left side of the instrument panel. ITBC information is displayed on the Driver Information Center.

Adjust the Trailer Gain by pressing the +/– adjustment buttons on the control panel.

Squeeze the levers together (left lever does not move) on the control panel to manually apply the trailer brakes.

See Driving and Operating in your Owner Manual.

Tow/Haul Mode

The Tow/Haul Mode adjusts the transmission shifts to reduce shift cycling, such as when towing or hauling heavy loads or driving on steep grades.

Press the on or off.

Tow/Haul Mode button on the end of the shift lever to turn the system

See Driving and Operating in your Owner Manual.

Tire Pressure Monitor

The Low Tire Pressure warning light on the instrument cluster illuminates when one or more of the vehicle’s tires is significantly underinflated. Fill the tires to the proper tire pressures. The proper tire pressures for the vehicle are listed on the Tire and Loading

Information label, located below the driver’s door latch. Current tire pressures can be viewed in the Driver Information Center.

Tire pressure is affected by cold weather and distance driven. If the low tire pressure

warning light illuminates when the vehicle is first started in cooler temperatures and then turns off as the vehicle is driven, check for the proper tire pressures.

Refer to your Owner Manual for additional information about normal monthly tire maintenance.

See Vehicle Care in your Owner Manual.

Roadside Assistance

1-800-GMC-8782

(1-800-462-8782)

TTY Users: 1-888-889-2438

As the owner of a new GMC, you are automatically enrolled in the GMC Roadside

Assistance program for up to 5 years/60,000 miles, whichever occurs first, at no expense to you. GMC’s Roadside Assistance toll-free number is staffed by a team of trained advisors who are available 24 hours a day, 365 days a year, to contact a service provider for light services (fuel delivery, jump-starts, flat tire and lock-outs) or make arrangements to tow your vehicle to the nearest GMC dealer for any repairs.

Roadside Assistance and OnStar ®

If you require roadside service and have a current OnStar subscription, press the OnStar button and the vehicle will send your current GPS location to an OnStar Advisor who will speak to you, assess your problem, contact Roadside Assistance and relay your exact

location so you will get the help you need.

Mobile Apps

The myGMC mobile app connects owners to a variety of vehicle info rmation and services, such as a searchable Owner Manual, real-time fuel information and Roadside Assistance.

Download the OnStar RemoteLink mobile app and enjoy select features for five years from date of vehicle delivery. With a compatible mobile device, OnStar subscribers can access many services, including remotely starting/stopping the vehicle, locking/unlocking doors, and locating the vehicle on a map (on properly equipped vehicles). To learn more about OnStar services, press the blue OnStar button, call

1-888-4ONSTAR (1-888-466-7827), visit onstar.com or refer to your owner manual.

Download the mobile apps from your compatible mobile device’s app store.

GMC Owner Center

Get to know your vehicle inside and out with the GMC Owner Center. Check out personalized information, including an online owner manual and helpful how-to videos, track your service history and warranty status, review your current OnStar Vehicle Diagnostics report

(active OnStar account required) and more. Create an account today at my.gmc.com.

We recommend always using ACDelco or genuine GM service parts.

Certain restrictions, precautions and safety procedures apply to your vehicle. Please read your Owner Manual for complete instructions. All information contained herein is based on the latest information available at the time of printing and is subject to change without notice. Copyright 2015 General Motors. All rights reserved.

23133501 A

!23133501=A!

Hello! I am an AI chatbot specifically trained to assist you with the GMC 2016 Yukon Guide. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Assistant typing

Assistant terminated