NIKY S 1500
87045 LIMOGES Cedex
Telephone : (+33) 05 55 06 87 87 - Fax : (+33) 05 55 06 88 88
Niky S 1500
3 100 20
TABLE OF CONTENTS Page
1. General features.....................................1
2. Technical features..................................1
1. GENERAL FEATURES
2. TECHNICAL FEATURES
The Legrand UPS NIKY S 1500 model is an uninterruptible power
source with interactive line technology and sinusoidal output.
It delivers a rated power of 1500VA – 900W, is managed by a
microprocessor, is equipped with integrated self-diagnostics and
works on cold-start.
NIKY S 1500 is equipped, internally, with valve-regulated,
hermetically sealed lead accumulator batteries to guarantee a
minimum uptime of 9 minutes at 80% of the load. The batteries can
be easily replaced thanks to a specific door located on the front of
the UPS.
The presence of an electronic stabiliser (AVR) inside the UPS
provides the connected loads with effective protection against
any interference in the electrical mains. It also guarantees an
uninterrupted power supply, thanks to the RJ11/ RJ45 sockets,
offering excellent telephone/fax/modem/LAN protection.
This UPS has 6 IEC output sockets.
NIKY S 1500 can be connected to a PC through the USB and Serial
RS232 port allowing you to monitor its operation, thanks to the free
software, and carry out an emergency shutdown of Windows and
Linux operating systems.
Through the 3-button control panel, the LCD screen and 3 status
LEDs, it can display the following alarms and operating modes:
• battery charge percentage
• normal operation
• battery-powered operation
• overloaded
• generic anomaly
• back-up time
• end of uptime
The NIKY S 1500 Static Uninterruptible Power Supply bears the
CE marking, pursuant to Directives 73/23, 93/68, 89/336, 92/31,
93/68, and is designed and built in compliance with the following
standards:
• EN 62040-1 “General and safety requirements for UPSs used in
areas that are accessible to the operator”
• EN 62040-2 “Electromagnetic Compatibility requirements (EMC)”
• EN 62040-3 “Performance and test method requirements”.
General Features
Nominal power (VA)
1500
Active power (W)
900
Technology
Line-interactive VI
Waveform
Sinusoidal
Input
Input voltage
230 V ± 12% when powered from the mains ± 5%
when battery-powered
Input frequency
50-60 Hz
Input Voltage Range
160V-290V
Output
Output voltage
230V ± 10%
Output frequency (nominal)
50/60 Hz +/-0.2%
THD Output voltage
< 3% with linear load
Batteries
Number of batteries
2
Battery series Type/Voltage
12V, 9Ah
Communication and Management
Display and Signals
Four buttons and four LEDs to monitor
the status of the UPS in real time
Protection for the telephone
RJ11/RJ45
Remote Management
available through USB and RS232 port
Mechanical Features
Measurements H x L x D (mm)
247x173x369
Net Weight (kg)
15
Environmental Conditions
Operating temperature (°C)
0 ÷ 40°C
Relative humidity (%)
0÷95 % non-condensing
Noise level at 1 m (dBA)
< 40
Certifications
Standards
Technical file: UPS-LGR-0059/GB
Update: 01/09/2012
EN62040-1, EN62040-2, EN62040-3
01/09/2012
1/1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising