Product Specifications CNT CNT--400 400

Product Specifications CNT CNT--400 400
Product Specifications
CNT
CNT--400
CNT­400, CNT® 50 Ohm Braided Coaxial Cable, variable, black PE jacket Construction Materials
Jacket Color Black Jacket Material Non­halogenated PE Braid Material Tinned copper Shield Tape Material Aluminum Dielectric Material Foam PE Inner Conductor Material Copper­clad aluminum wire Dimensions
Cable Weight 0.10 kg/m Diameter Over Dielectric 7.240 mm
Diameter Over Jacket 10.290 mm
Diameter Over Tape 7.391 mm
Inner Conductor OD 2.7400 mm
Nominal Size 0.400 in Outer Conductor OD 8.080 mm
|
0.285 in |
|
0.405 in 0.291 in |
0.1079 in |
0.318 in |
24.0 pF/ft Electrical Specifications
Cable Impedance 50 ohm Capacitance 78.0 pF/m
dc Resistance, Inner Conductor 4.690 ohms/km
|
1.430 ohms/kft dc Resistance, Outer Conductor 5.610 ohms/km
|
1.710 ohms/kft dc Test Voltage 2500 V Jacket Spark Test Voltage (rms) 4000 V Maximum Frequency 16.20 GHz Operating Frequency Band 30 – 6000 MHz Peak Power 16.0 kW Shielding Effectiveness >90 dB Velocity 85% Environmental Specifications
Installation Temperature ­40 °C to +85 °C (­40 °F to +185 °F) Operating Temperature ­40 °C to +85 °C (­40 °F to +185 °F) Storage Temperature ­70 °C to +85 °C (­94 °F to +185 °F) ©2016 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: January 16, 2016
page 1 of 2
April 14, 2016
Product Specifications
CNT
CNT--400
General Specifications
Cable Type CNT­400 Braid Coverage 90% braid Brand CNT® Mechanical Specifications
Bending Moment 0.7 N­m | 0.5 ft lb Flat Plate Crush Strength 0.7 kg/mm | 40.0 lb/in Minimum Bend Radius, Single Bend 25.40 mm
Tensile Strength 73 kg
|
|
1.00 in 160 lb Electrical Performance
Frequency
30 MHz
50 MHz
150 MHz
220 MHz
450 MHz
900 MHz
1500 MHz
1800 MHz
2000 MHz
2400 MHz
2500 MHz
3000 MHz
4000 MHz
4500 MHz
5000 MHz
5200 MHz
5500 MHz
5800 MHz
6000 MHz
Attenuation (dB/100 m)
2.49
3.18
4.92
6.23
8.86
12.80
16.70
18.40
19.40
21.65
22.00
24.60
28.87
30.84
32.81
33.46
34.78
35.76
36.42
Attenuation (dB/100 ft)
0.76
0.97
1.50
1.90
2.70
3.90
5.10
5.60
5.90
6.60
6.70
7.50
8.80
9.40
10.00
10.20
10.60
10.90
11.10
Regulatory Compliance/Certifications
Agency
RoHS 2011/65/EU
China RoHS SJ/T 11364­2006
ISO 9001:2008
Classification
Compliant
Below Maximum Concentration Value (MCV)
Designed, manufactured and/or distributed under this quality management system
©2016 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: January 16, 2016
page 2 of 2
April 14, 2016
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising