Eddy_CPU_V2.0_Spec_Sheet
Eddy™ CPU Module SPEC SHEET
Eddy™ CPU Module
Embedded CPU Module
Main Features
● 32-bit ARM9 CPU / 4MB Flash / 32MB SDRAM
● Pin Header Interface(108 pin)
●10/100 Ethernet PHY (Auto MDIX) & 2 UARTs
● Max 16 Programmable GPIO
● Supported by Dev Kit including SDK, API
● Operated by Real Time Linux – Lemonix™
● Supported by Eclipse based IDE LemonIDE™
● Provides easy-to-use Windows utilities
COM Port Redirector,
PortView™,TestView™
● Compact sized to fit into any hardware
● Operation Temp : -40 ~ 85˚C
Eddy-CPU is a high-performance embedded
CPU module with powerful ARM9 core
processor. This compact-sized Eddy-CPU module
provides
complete
embedded
network
connectivity, allowing developers and OEMs to
design their own customized device that can be
applied to almost all hardware environments.
It’s features include 16bit address and 8 bit
data bus interface to connect external device,
PHY interface for Ethernet connectivity, and 16
programmable GPIO pins.
Design your applications faster and
easier.
Designing an embedded device is not an easy
task. CPU, memory and other complicated
hardware specs must be considered and reviewed.
Having to go over every component of your
embedded device is not only difficult but also
very time consuming, and this often leads to
sloppy designs. You also have to port and
customize your OS so that it would be fully
compatible to your embedded device. Also a very
Experience the powerful and flexible features
difficult task.
of Eddy-CPU optimized for your special
applications and hardware.
Ordering a tailored hardware board may be an
alternative, only if you are willing to pay a high
price or can meet a high MOQ with units usually
exceeding thousands.
Eddy-CPU provides a simple solution to all of
these concerns. Eddy-CPUs are equipped with
powerful 32bit ARM9 CPU (180MHz), 4MB Flash
Memory, 32MB SDRAM and customized real time
embedded Linux, Lemonix fully compatible to this
hardware. You don’t have to waste needless hours
struggling with bible-thick databooks and porting
OS. You can concentrate on what matters the
most; your application, and that with least
Eddy modules mounted on the Development Kit Board amount of time and effort.
Eddy™ CPU Module SPEC SHEET
Industry’s Most Powerful Specs
Tired of constraints on your embedded device
server’s 8-bit CPU and 256KB memory? Eddy
provides a simple and complete relief to these
concerns by adopting a 32-bit ARM9 CPU with
180MHz clock, 4MB Flash memory, and 32MB
SDRAM. Your applications can be large in size
and will run faster, in a more stable manner
under the real time embedded Linux operating
system, Lemonix.
Eclipse based IDE – LemonIDE™
Support
LemonIDE is an integrated development
environment built on open source Eclipse
framework. LemonIDE provides an easy &
effective GUI (Graphical User Interface) for
Application and Firmware Developments that
runs on SystemBase’s embedded real time
Linux, Lemonix
LemonIDE encompasses GNU C/C++ Compiler,
Source Code Editor and Debugger delivering a
one-stop development environment solution to
Real Time Linux – Lemonix™
embedded developers with conveniences of
Lemonix is a Real Time Linux built on Linux simple mouse click execution.
kernel 2.6.x. Standard Linux kernel 2.6.x has
been revised to support Real Time capability
while retaining the stable traits and merits of
Linux kernel 2.6.x. Real time scheduler,
preemptive kernel and lock-break methods
have been implemented on Lemonix to
guarantee a maximum response latency of
under 37 us enabling a stable and reliable
means of real time communication.
Development Kit
Eddy Development Kit provides an easy
testing and evaluation environment for Eddy
applications. Before integrating Eddy to user’s
hardware, applications are first programmed
and tested on the development board. Power,
Ready, Communication Interface, and GPIO
SDK, API & Source Codes Support
Serial Signal Status LEDs on the development
Eddy is distinguished with other embedded board provides a visual guide in understanding
device servers in that it can upload and Eddy’s operating status.
execute customized user applications. To
enable developers to program their own Windows Utility Support
socket/serial communication applications with
High featured and easy-to-use utilities to
least amount of time and effort, SystemBase
provides arrays of development support monitor and test your finalized products over
including, SDK (Software Development Kit), API network and serial interface are provided at no
(Application Programming Interface) and Source cost. SystemBase management utilities, COM
port redirector, PortView and TestView enables
Codes to assist developments.
an accurate monitor and full administration of
your inventions.
Eddy™ CPU Module SPEC SHEET
Eddy™ CPU Specifications
Hardware
CPU
ARM926EJ-S(180 MHz)
Memory
4MB Flash, 32 MB SDRAM
External I/F
16 bit / 8 bit data bus
Ethernet I/F
10/100 Base-T(PinHeader,TTL Level)
GPIO
Max. 16 Programmable I/O Pins
Power Input
3.3 V (200mA max.)
Dimensions
25 x 42 x 6 mm
Weight
7g
Network
Protocol
TCP, UDP, Telnet, ICMP, DHCP, TFTP,
HTTP, SNMP 1&2, SSH, SSL
Ethernet
10/100Mbps MAC / PHY
Network
Connection
Static IP, DHCP
Software
O/S
Lemonix Real Time Linux
Mgt Tools
SNMP, Web, PortView
Uploads
TFTP, FTP, Web
Dev Tools
LemonIDE & SDK
Environmental
Operating
Temp
Storage
Temp
Humidity
-40 ~ 85°C
-60 ~ 150˚C
5 ~ 95% Non-Condensing
Approvals
CE Class A, FCC Class A, RoHS Compliant
Ordering Information
Eddy-CPU
Embedded CPU Module
Package
Eddy-CPU
Eddy-CPU Module
Utility/Document CD
Eddy™ CPU Module SPEC SHEET
Eddy™ Development Kit
Specifications
Hardware
LED
Power, Ready, 16 Programmable IO,
Console and Serial TxLED, RxLED
Switch
Product Setting Switch
Jumper
Switch
Boot Mode Select,, JTAG Select,
RS422/485 Select
Serial
Port
2 x DB9 Male
Port 1 : (RS232. RS422, RS485)
Port 2 : RS232 Only
Console Port
1 x DB9 Male (RS232)
LAN Port
1 x RJ45
ICE Port
Used for Flash Image uploads
Reset Button
Factory Default & warm boot
Serial
Interface
RS232, RS422/RS485 Selectable
(RS422 & RS485 selected by S/W)
Module
Connection
Socket
108 Pin header for Eddy-CPU®
Connections
26 Pin header for Eddy-S1/PIN or
Eddy-WS1/PIN Connections
34 Pin TTL for Eddy-WS1/TTL
Connections
Input Power
5V DC (400 mA)
Dimensions
115 * 125 mm
Ordering Information
Eddy DK
Eddy Development Kit
Package
Eddy DK
Test Board & Eddy-CPU Module
SDK/IDE/Compiler/
Utility/ Document CD
LAN Cable, Serial Cable,
Pin Header Cable, Board Support,
Jumper, Power Adaptor, Power Cable
© 2007 SystemBase Co., Ltd.
16th Fl. Daerung Post Tower-1, 212-8, Guro-dong, Seoul, Korea
Tel +82-2-855-0501 | Fax +82-2-855-0580 | tech@sysbas.com | www.sysbas.com
Specifications subject to change without notice
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising