Ligowave Rapidfire 5 Datasheet

Ligowave Rapidfire 5 Datasheet
LigoPTP 5-N/ 5-23 RapidFire
Outdoor Wireless Point-to-Point Bridge
COPYRIGHT ©2015 LIGOWAVE
COPYRIGHT ©2015 LIGOWAVE
www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
Outstanding capacity
RapidFire delivers an extremely high 700 Mbps throughput via its unique and powerful RF design that supports up
to 256QAM modulation and 31 dBi output power. Our proprietary W-Jet V protocol, specifically engineered for high
performing PTP scenarios, minimizes interferences even across long distances and stabilizes latency within 2-4 ms.
45°
Professional design
In addition to achieving maximum performance, LigoWave focuses on delivering flexibility and ease-of-use in our
RapidFire series. The robust mounting bracket enables rapid deployment of the links and ensures survivability during
high wind-load. The integrated antenna possesses a 45° rotation option which increases installation flexibility; especially
advantageous in noisy spectrum areas. A GORE© membrane vent allows fast pressure equalization of the IP-67 rated
cast aluminum enclosure to prevent condensation and to ensure seal performance . A detachable handle eases
transporting the devices up towers and over rough terrains. Newly designed RGB LEDs indicate different device statuses
and signal levels (in 1dBm steps) when aligning the antenna.
Powerful all-in-one hardware platform
LigoWave RapidFire delivers powerful performance with its new 1.2 GHz CPU dedicated for data processing and high
(200,000) packet per second delivery. Equipped with two Gigabit Ethernet ports, one with PoE passthrough, the unit
allows for 1+1 (failover) or repeater links and is ideal for high-security video surveillance scenarios. RapidFire incorporates
integrated surge and ESD protection according to IEC standards and passes Class 4 requirements.
COPYRIGHT ©2015 LIGOWAVE
www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
Wireless configuration interface
An internal 2.4 GHz radio allows access into the Rapidfire GUI by wireless connection with any WIFI equipped device. This
feature expedites the installation of links and alleviates the problem of troubleshooting in difficult-to-reach locations. Tests
prove accessibility even when mounted on top of a 10-story building while standing 20 meters (65 ft) away!
Powerful OS
The LigoPTP operating system ensures easy and rapid deployment of point-to-point links with stable, fast performance.
An intuitive and responsive user interface adjusts the layout based on the size of your screen. Essential tools including
Setup Wizard, link test, antenna alignment, spectrum analyzer, and site survey are included to make set-up and
troubleshooting more efficient. Automatic mechanisms such as auto-channel and automatic transmit power control
optimize the link for maximum performance even in areas with high interference.
COPYRIGHT ©2015 LIGOWAVE
www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
Setup Wizard
Spectrum Analyzer
Single side configuration
A link setup wizard guides the installer
through the important steps of the
set-up process.
The integrated spectrum analyzer
demonstrates the noise floor in order to
find the optimum frequency.
LigoPTP RapidFire simplifies link
configuration by supporting single
side configuration as parameters are
automatically applied to slave units once
set on the master side.
Easy Pre-configuration
Multiple options to pre-configure LigoPTP RapidFire devices are displayed in a scheme below. Devices can be connected with
each other using wired or wireless connectivity. End-user device can also connect to the master device using 2.4 GHz access
radio or using wire to the Ethernet port of the master device. LigoPTP RapidFire devices can be discovered using bonjour and
SSDP protocols as well.
Wireless
Wired
MASTER
SLAVE
ETH 1
ETH 1
COPYRIGHT ©2015 LIGOWAVE
www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
802.3af/at inserter
DC input connector
DIN rail mounting
Grounding pin
Electrical specifications
Physical specifications
DC input voltage range 44.0–57.0V
DC input
IEEE 802.3af/at compliant POE output
Data input jackRJ45
Output power up to 28W
Data + Power output jack RJ45
Power output RJ45 pins 1,2,4,5 (+) and 3,6,7,8 (-)
Dimensions117x87x34mm
Data rate10/100/1000Mbps
Weight270g
Surge protection 2kV line to line,
6kV line to ground (output port)
Operating temperature -40 to +65C
UTP/FTP cable length 100m total
(from switch to the device)
COPYRIGHT ©2015 LIGOWAVE
www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
Radio
Wireless protocol
W-Jet V
Radio mode
MIMO 2x2
Frequency range
Channel size
4.900 - 6.100 GHz (FCC: 4.940 - 4.990 GHz, 5.150-5.250 GHz, 5.725-5.850 GHz)
5, 10, 20, 40, 80 MHz
Modulation schemes
OFDM (256-QAM, 64-QAM, 16-QAM, QPSK, BPSK)
Data rates @ 80 MHz
866, 780, 650, 585, 520, 390, 260, 195, 130, 65 Mbps
Duplexing scheme
TDD
Error correction
BCC, LDPC
Modulation, Mbps
866
780
650
585
520
390
260
195
130
65
TX Power, dBm
25
26
26
27
27
28
29
30
30
31
Receive sensitivity, dBm
-71
-73
-77
-79
-80
-84
-87
-92
-94
-97
Antenna
LigoPTP 5-23 RapidFire
Integrated directional dual-pol 23 dBi panel
LigoPTP 5-N RapidFire 2 N-type connectors
Wired
First Interface 10/100/1000 Base-T with PoE IN (RJ45)
Second Interface 10/100/1000 Base-T with PoE OUT (RJ45)
Physical
Dimensions without mount:
LigoPTP 5-23 RapidFire
Length 379 mm (14.9‘’), width 387 mm (15.2‘’), height 51 mm (2‘’)
LigoPTP 5-N RapidFire
Length 399 mm (15.7‘’), width 174 mm (6.8‘’), height 47 mm (1.8‘’)
Mount length till pole
124 mm (4.8‘’)
Weight including mount:
LigoPTP 5-23 RapidFire
3.9 kg (8.5 lb)
LigoPTP 5-N RapidFire
2.9 kg (6.3 lb)
Power
Power input method, voltage
PoE 802.3at, isolated 42 - 57 VDC
Power consumption (max) 8.6 W
Power output method, voltage
PoE 802.3af, 48 VDC, 12.95W maximum
PoE inserter and AC/DC adapter are included
Environmental
Operating temperature
-40°C (-40 F) ~ +65°C (+149 F)
Humidity
0 ~ 90 % (non-condensing)
COPYRIGHT ©2015 LIGOWAVE
www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
Software features
• Wizard for fast link setup
• Centralized control from master:
A) Common wireless link parameters; B) Individual slave parameters
• Smart Auto-channel
• Robust data security
• QoS with hardware acceleration
• Spectrum analyzer
• Wireless signal and device state indication on RGB LEDs
• Dual firmware image
Management
Dedicated 2.4 GHz radio for management
System monitoring
SNMP, GUI/HTTP(S), Shell/SSH and WNMS
System configuration
GUI/HTTP(S) and WNMS
Regulatory
Certification
FCC/IC/CE
Antenna specifications
V Pol
H Pol
0
30
0
330
60
300
270
90
120
240
150
180
0
30
210
Azimuth
330
60
30
300
270
90
120
240
150
210
180
Elevation
0
330
60
30
300
270
90
120
240
150
180
Azimuth
210
330
60
300
270
90
120
240
150
210
180
Elevation
Internal antenna
4.9 - 5.9 GHz
Frequency range
23 dBi
Gain
Dual linear
Polarization
27 dBi
Cross-pol Isolation
1.5:1
VSWR
Azimuth beamwidth (H pol)
6 deg
Azimuth beamwidth (V pol)
7 deg
Elevation beamwidth
9 deg
LigoPTP 5-N/ 5-23 RapidFire
Copyright © 2015 LigoWave. All rights reserved. LigoWave, the LigoWave logo, are trademarks of LigoWave. All other company and product names may be trademarks of
their respective companies. While every effort is made to ensure the information given is accurate, LigoWave does not accept liability for any errors or mistakes which may
arise. Specifications and other information in this document may be subject to change without notice. To learn more about LigoWave products, visit www.ligowave.com.
COPYRIGHT ©2015 LIGOWAVE
www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising