421.28 KB PDF

421.28 KB PDF
Form No. F_032314 Rev 14.1
Page 1 of 2
TECHNICAL DATA
J-1 WET ALARM VALVE
WITH EUROTRIM FOR
UL-FM MARKET
Viking SA, Zone Industrielle Haneboesch, L-4562 Differdange/Niedercorn, Luxembourg
Telephone: +352-58-37-37-1 Fax: +352-58-37-36 Email: vikinglux@vikingcorp.com
1. DESCRIPTION
The Viking Model J-1 Alarm Check Valve serves as a check valve by
trapping pressurized water above the clapper and preventing reverse
flow from sprinkler piping. The valve is designed to initiate an alarm
during a sustained flow of water (such as the flow required by an
open sprinkler) by operating an optional water motor alarm and/or
alarm pressure switch. The valve is made suitable for use on variable
pressure water supplies by adding the optional retard chamber to the
standard trim.
2. LISTINGS AND APPROVALS
cULus Listed
FM Approved
CE Certified
3. ORDERING INFORMATION
To order a Viking Eurotrim follow our three step selection process:
Step 1:
Base Valve & Trim
TABLE 1: VALVE SIZES AND END CONNECTIONS
End
Connections
Flange-Flange
End
Connection
Types
3”
DN80
89 mm
4”
DN100
114 mm
ANSI
ET08235
ET08238
ET09108
ET09109
ET08236
ET08239
PN10
PN16
ANSI
Flange-Groove
PN10
PN16
Step 3:
Optional
Components
Step 2:
Alarm
Trim
Groove-Groove
--
6”
DN150
165 mm
168 mm
8”
DN200
219 mm
ET08244
ET08241
ET09111
ET12388
--
ET09535
ET09536
--
ET08237
ET08240
ET09405
ET08245
ET08242
ET09877
ET12389
ET08243
ET08246
TABLE 2: ALARM TRIM
Part Number
Approval Type
19420
UL-FM Market
TABLE 3: OPTIONAL COMPONENTS
Part Number
Component
05904B
Retard Chamber
880214
Monitoring Switch for Alarm Line Ball Valve
8121960050
Bracket for Monitoring Switch
Form No. F_032314 Rev 14.1
Page 2 of 2
J-1 WET ALARM VALVE
WITH EUROTRIM FOR
UL-FM MARKET
TECHNICAL DATA
Viking SA, Zone Industrielle Haneboesch, L-4562 Differdange/Niedercorn, Luxembourg
Telephone: +352-58-37-37-1 Fax: +352-58-37-36 Email: vikinglux@vikingcorp.com
4. DIMENSIONS
Size
A
B
C
D
E
F
G
H
I
3” DN80 258.8 184.2 220.0 209.5 261.3 401.3 190.9 158.5 130.2
4” DN100 269.9 187.3 241.0 221.6 282.3 391.4 192.4 161.1 180.2
6” DN150 339.7 257.2 243.2 244.4 284.5 337.8 246.1 185.9 180.2
8” DN200 431.8 211.1 285.7 269.8 327.0 275.9 169.9 211.3 180.2
All dimensions are approximations.
5. MOUNTING INSTRUCTIONS
1. Attach the gauges and their spigots to the
valve (1)
2. Attach the base trim to the valve by tightening the
three unions (2)
3. Attach the alarm trim to the base trim by tightening
the union (3)
4. If a retard chamber is required the remove the
½” x ¾” reducer from the alarm line (4) and
insert the retard chamber. The reducer has been
installed with PTFE tape to allow for easy removal.
4
1
2
3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising