DATA SHEET
DATA SHEET
Order code
72-9665
72-9667
Manufacturer code
KP-2012PBC-A
KP-2012PBC-A.
Description
KP-2012PBC-A RL2000 LED 0805 BLUE 60MCD
KP-2012PBC-A LED 0805 BLUE 60MCD RC
Page 1 of
The enclosed information is believed to be correct, Information may change ‘without notice’ due to
product improvement. Users should ensure that the product is suitable for their use. E. & O. E.
Sales: 01206 751166
Sales@rapidelec.co.uk
Technical: 01206 835555
Tech@rapidelec.co.uk
Revision A
20/02/2007
Fax: 01206 751188
www.rapidonline.com
6
2.0x1.25mm SMD CHIP LED LAMP
ATTENTION
Part Number: KP-2012PBC-A
BLUE
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
Description
z2.0mmx1.25mm
zLOW
SMT LED,1.1mm THICKNESS.
Light Emitting Diode.
POWER CONSUMPTION.
zWIDE
zIDEAL
VIEWING ANGLE.
Static electricity and surge damage the LEDS.
FOR BACKLIGHT AND INDICATOR.
It is recommended to use a wrist band or anti-electrostatic
zVARIOUS
COLORS AND LENS TYPES AVAILABLE.
zPACKAGE
glove when handling the LEDs.
All devices, equipment and machinery must be electrically
: 2000PCS / REEL.
zMOISTURE
zRoHS
The Blue source colordevices are made with InGaN on SiC
SENSITIVITY LEVEL : LEVEL 3.
grounded.
COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. Specifications are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAF1613
REV NO: V.8
DATE: MAR/15/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: D.M.LIU
PAGE: 1 OF 5
Selection Guide
Dice
Part No.
KP-2012PBC-A
Iv (mcd) [2]
@ 20mA
Lens Type
BLUE (InGaN)
Viewing
Angle [1]
Min.
Typ.
2θ1/2
18
60
120°
WATER CLEAR
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous Intensity / Luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak
Peak Wavelength
Blue
λD [1]
Dominant Wavelength
Δλ1/2
Typ.
Max.
Units
Test Conditions
468
nm
IF=20mA
Blue
470
nm
IF=20mA
Spectral Line Half-width
Blue
21
nm
IF=20mA
C
Capacitance
Blue
100
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Blue
3.2
4.0
V
IF=20mA
IR
Reverse Current
Blue
10
uA
VR = 5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Blue
Units
Power dissipation
120
mW
DC Forward Current
30
mA
Peak Forward Current [1]
100
mA
Reverse Voltage
5
V
Operating / Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAF1613
REV NO: V.8
DATE: MAR/15/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: D.M.LIU
PAGE: 2 OF 5
Blue
KP-2012PBC-A
SPEC NO: DSAF1613
REV NO: V.8
DATE: MAR/15/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: D.M.LIU
PAGE: 3 OF 5
KP-2012PBC-A
Recommended Soldering Pattern
(Units: mm; Tolerance: ±0.1)
Tape Specifications
(Units: mm)
SPEC NO: DSAF1613
REV NO: V.8
DATE: MAR/15/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: D.M.LIU
PAGE: 4 OF 5
PACKING & LABEL SPECIFICATIONS
KP-2012PBC-A
SPEC NO: DSAF1613
REV NO: V.8
DATE: MAR/15/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: D.M.LIU
PAGE: 5 OF 5
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising