Bogen Speakers and Accessories
PRO AUDIO LOUDSPEAKERS
Professional Loudspeakers
PRO AUDIO LOUDSPEAKERS
AMT-15, AMT-12
The AMT-15 and AMT-12 speakers are designed to deliver
high-output music and sound reinforcement in a costefficient package.
The AMT-15’s robust 15-inch woofer offers rich, dynamic
bass response down to 50 Hz. The 45mm compression
driver diaphragm, comprised of a titanium alloy for
added strength and rigidity, effortlessly handles the
high input levels to match the woofer. A carefully
designed crossover network accurately filters each
driver for proper matching of phase and summation
in the crossover region. The transition is much smoother
than other loudspeakers in this class, making the
sound more accurate and more realistic.
The AMT-12 combines the same high-output compression
driver used in the AMT-15 with a high-sensitivity 12-inch
woofer designed to maximize output. Slightly smaller
and lighter, the AMT-12 can still fill larger rooms with
plenty of power and with very accurate sound.
AMT-15
AMT-12
Product Features:
MOUNTING POINTS
RIGGING
POINTS
STACKING
SOCKETS FOR
SPEAKER FEET
AMT-12/15 TOP VIEW
www.bogen.com
• Molded polypropylene construction
• Heavy gauge steel grilles with powder-coated finish
• Large, high-sensitivity woofers
• Ferrofluid-cooled and damped, high-output titanium
alloy compression drivers
• Up to 300W power handling capability for AMT-15;
200W for AMT-12
Accessories
• Rich, dynamic bass response
• Versatile mounting abilities
109-2140
with an integral tripod mount,
AMT Rigging Beam Assembly
attachment points for fly109-2151
rigging & stacking speakers
AMT Rigging Kit
directly on one another with
top-side sockets to receive
speaker feet
108-2120
AMT-12 Yoke Assembly
• Lightweight, with integral
carrying handle molded
into speaker housing
108-2150
• Two combo input connectors:
AMT-15 Yoke Assembly
TM
1/4" Phone and Speakon
ATS70GB
• Smooth, precise passive
AMT Tripod Speaker Stand
crossover
SPEAKER
FEET
RIGGING
POINTS
TRIPOD
MOUNT
w/ LOCKING
SCREW
AMT-12/15 BOTTOM VIEW
Te c h n i c a l S p e c i f i c a t i o n s :
Model
Drivers
Frequency
Response
Sensitivity
15" Woofer;
50 Hz 20 kHz
98 dB
(1W @ 1m)
60 Hz 20 kHz
96 dB
(1W @ 1m)
AMT-15 45mm Compression
Driver
12" Woofer;
AMT-12 45mm Compression
Driver
Dispersion
Impedance
Power
Handling
Dimensions
Product
Weight
Horizontal:
65 degrees;
8-ohm
300 watts
27" H x 19" W x 15" D
47 lb.
8-ohm
200 watts
23" H x 16-1/4" W x 13" D
37 lb.
Vertical:
65 degrees
1
®
NEAR SPEAKERS
NEAR ORBIT SPEAKERS
ORBIT Ceiling Speaker
OCS1
NEAR Orbit Ceiling Speakers are the ideal choice for installations
where the quality of music and vocal reinforcement are crucial.
®
OCS1 Product Features:
• Computer-matched venting system and large
back can provide exceptionally full bass output
• Easy wiring with snap-on connector
• Front-mounted tap selector under grille
• Attachment point for seismic (safety) cable
• Input terminal cover with knockouts provides
protection for connections
• Heavy-gauge plated steel back can
• Integral swing-out clamps secure
installation in the ceiling
• Attractive heavy-gauge steel grille
assembly with fine perforations
• Off-white textured finish, paintable
• Complies with UL-2043
ORBIT Pendant Speaker
OPS1
NEAR Orbit Pendant Speakers provide an ideal sound solution for open
space environments that require clear, quality sound evenly distributed
throughout the area. These speakers offer a pleasing industrial
design and mount from above.
www.bogen.com
OPS1 Product Features:
OPS1B
• Specially designed to provide full-range bass
in open space environments
• Easy-to-use cable suspension system includes
three suspension cables with attached forged
eyebolts
• Large cabinet volume and computer-matched
venting system for superior bass output
• Snap-lock input connector for easy wiring to
drop cables
• Low-resonance cabinet structure
• Threaded brass insert point for
optional safety cable eyebolt
OPS1W
• Color-matched suspension cables & hardware
• Powder-coated, perforated sturdy steel grille
• Available in dark gray and off-white
textured, paintable finish
2 COLOR CHOICES*:
DARK GRAY OFF-WHITE
*Actual color may vary from these catalog samples.
O C S 1 & O P S 1 Te c h n i c a l S p e c i f i c a t i o n s :
Impedance
Power Handling
Dimensions
16 ohms
100W
OCS1:
12-3/8" dia. x 12" D
70V
32, 16, 8, 4, 2, & 1 W taps
100V
32, 16, 8, 4, & 2 W taps
Accessories
OPS1:
15" dia. x 9-1/4" D
Product
Weight
10 lb.
CK10B
(Black)
2
TBCR
CK10W
Tile Bridge
Support Ring
(OCS1 only)
(Off-white)
CK10
(Silver)
10 ft. Cable Kits
Product Features for both OCS1 & OPS1:
• 140-degree wide-dispersion coaxial driver for broad,
even coverage
• Stable, high-definition metal-alloy woofer cone
• 6-1/2" MDT metal-alloy cone delivers detailed sound;
3/4" polycarbonate tweeter
• MLS voice coil centering system
• High-efficiency drivers deliver superior performance
• Extremely good off-axis response
• For 16-ohm, 70V, and 100V systems
• Frequency response: 45 Hz to 19 kHz
• Sensitivity: 89.5 dBspl
• Connector provides loop-through to next speaker
• Fire-rated (UL 94V-0) ABS baffle
• Listed to UL Standard 60065 for US and Canada
®
NEAR SIGNATURE LOUDSPEAKERS
S4/S4T
NEAR Signature S4 & S5 Loudspeakers are compact, versatile, and feature
NEAR’s unique driver technologies which produce impeccable sound quality. With
their compact form factor, these speakers are an excellent fit for most indoor
environments or protected outdoor locations.
Designed to both sound and look great, these speakers employ NEAR’s unique
MDT and MLS technologies (see page 4); thick-walled, low-resonance ABS enclosures; scratch-resistant, powder-coated aluminum grilles; and compact, powdercoated cast aluminum adjustable swivel mounts.
S4/S4T Product Features:
S5/S5T Product Features:
• Two models: S4 for 8 ohms; S4T for 70V & 8 ohms
• 75W at 8 ohms (S4 & S4T)
• 70V Power settings: 16, 8, 4, 2, 1 watts (S4T Only)
• 4-1/2” metal-alloy MDT TM mid/bass speaker cone
is extremely stable in all environments
• Two models: S5 for 8 ohms; S5T for 70V & 8 ohms
• 150W at 8 ohms (S5 & S5T)
• 70V Power settings: 32, 16, 8, 4, 2, 1 watts (S5T Only)
• 5-1/4” metal-alloy MDTTM mid/bass speaker cone
is extremely stable in all environments
• Professional Grade 1-1/2” diameter woofer voice coil
provides higher output level and ultra-low distortion
S4/S4T & S5/S5T Product Features:
• High sensitivity and exceptional power handling
• Hemispherical mounting system makes it simple to
mount, aim, and lock-in position of loudspeaker
• Patented MLSTM Ferrofluid voice coil centering replaces
distortion-causing mechanical spider and seals
magnet gap
• Unique MDTTM provides an extremely stable cone
structure, fast transmission of sound, and efficiently
heat-sinks the voice coils
• Wide, even coverage over listening area
• Low-resonance cabinet structure
• Precisely designed low-frequency tuning for proper
balance
• Advanced polymer compound cone surrounds resist
UV rays, chemicals, and salt spray
• Aluminum-alloy & Titanium cones, UV-protected ABS
cabinets, and powder-coated aluminum grilles and
mounting brackets assure long-term cosmetic
and sonic durability
• Pressure clamping input terminals for quick installation
• Color-matched mounting bracket included (see sidebar)
®
S5/S5T
NEAR SPEAKERS
SIGNATURE
High-Performance
Foreground Loudspeakers
S4/S4T & S5/S5T
Compact Swivel Mount
Bracket Assembly
MOUNTING CAP NUT
SPEAKER BRACKET
MOUNTING BRACKET BASE
2 COLOR CHOICES*:
BLACK
www.bogen.com
(SIDE VIEW)
The NEAR Signature hemispherical
swivel mount provides close-to-thewall mounting, in both a vertical and
horizontal orientation, while at the
same time offfering a wide range of
movement for accurate aiming of
the loudspeaker.
WHITE
*Actual color may vary from these catalog samples.
Te c h n i c a l S p e c i f i c a t i o n s :
Drivers
Frequency
Response (-10dB)*
(1W @ 1 meter)
HF: 1'' Nominal Dia.
LF: 4-1/2'' Nominal Dia.
58 Hz- 18 kHz
86 dB SPL
HF: 1'' Horn-Loaded
LF: 5-1/4'' Nominal Dia.
48 Hz- 17 kHz
Model
S4
S4T
S5
S5T
* Half Space Response
Sensitivity
89 dB SPL
Product
Weight
Dispersion
Power Handling
Hor.: 150˚
Ver.: 120˚
75W @ 8Ω
5-1/4" W x 8-1/4" H x 5-3/8" D
5 lb.
75W @ 8Ω or
16, 8, 4, 2, & 1W @ 70V
5-1/4" W x 8-1/4" H x 7-3/8" D
6 lb.
150W @ 8Ω
6-7/8" W x 9-3/4" H x 6-1/8" D
Hor.: 130˚
Ver.: 110˚
8 lb.
150W @ 8Ω or
32, 16, 8, 4, 2, & 1W @ 70V
6-7/8" W x 9-3/4" H x 8-1/8" D
9 lb.
Dimensions
(without bracket)
(with bracket)
(without bracket)
(with bracket)
3
®
®
NEAR SPEAKERS
NEAR Armadillo Speakers
Form follows function in the A-Series,
a.k.a., the “armadillo” line. Its unique
rounded ends and side corrugations,
which give the speakers their characteristic
“armadillo” shell look, are constructed of
mineral-filled polypropylene. This dense
molded material creates an extremely
durable cabinet with excellent acoustic
properties. Cabinet and components
are impervious to salt spray and dust.
Tough, Through and Through
The A-Series is made of premium material
components: die cast aluminum frames,
hard anodized aluminum cones, black
anodized aluminum voice coil formers,
compound rubber cone surrounds, hightemperature adhesives, UV-inhibited
mineral-filled polypropylene enclosure,
powder-coated aluminum, perforated PVC
plastic grilles, threaded brass inserts, and
gold-plated connectors. These are the most
durable materials used in any speaker in
the industry!
3 COLOR CHOICES*:
BLACK
GREEN
WHITE
*Actual color may vary from these catalog samples.
Accessories
ASTB4
Terminal Block
Electrical Cover
(Protects wires and
connections from
water and effects
of weather)
(For A2, A6, and A8 models)
www.bogen.com
NEAR A-SERIES LOUDSPEAKERS
A2, A2T
A8, A8T
NEAR A-Series Speakers set the standard for smooth, accurate sound, attractive appearance, constant and reliable high performance, and rugged construction. Designed to
perform beautifully under the toughest conditions, the A-Series combines outstanding
aesthetic design with patented speaker technology for unsurpassed audio quality and
weatherproof durability, ideal for music or paging.
Product Features:
• Maximum speaker power capacities of 100,
150, and 175 watts at 8 ohms; and 16, 32,
and 64 watts at 70V (T versions)
• Coaxial and 2-way capability
• 8-ohm or 70V models
• High-precision, high-performance sound
• Long-term power handling for constant use
• Reduced distortion at all output levels
• Unsurpassed sound quality
• High dispersion of sound (80° on A2,
110° on A6, and 100°on A8 models)
• Completely weatherproof, fully-sealed
cabinet for indoor and outdoor applications
• Withstands harsh weather conditions
including sun, wind, rain, freezing
temperatures, ice, and snow without
affecting audio clarity or intelligibility
• Corrosion-resistant mounting hardware
• Rugged and durable construction
• Metal-alloy low-frequency drivers
• Special rubber driver surrounds
• Dual-layer aluminum voice coils, combined
with Ferrofluid, provide efficient heat-sinking
under long-term, high power situations
• Over-sized mounting knobs to secure
mounting easily
A-Series
Mounting
Bracket
• Quick and easy mounting brackets have
slots for the speaker to slide in with side
knobs attached
• Color finish (black, green, or white)
matches speaker cabinet
• Heavy-gauge aluminum brackets (stainless
steel on A8 models) are powder-coated to
resist chipping and scratching
What Makes NEAR Speakers So Unique?
®
• MDT ™ Technology – Metal Diaphragm Technology uses metalalloy drivers (not paper and plastic) for extremely stable
speaker cones, even after long periods of time. MDT is lightweight, strong, and produces natural sound, significantly better
phase response, musical accuracy, and fine detail of sound
with ultra-low distortion.
• MLS Design – Magnetic Liquid Suspension uses the speaker’s
own magnetic field to precisely center the voice coil in the
magnet gap. This eliminates the need for distortion-causing
voice coil spiders found in conventional speakers and allows
longer speaker excursion. A proprietary Ferrofluid seals the
magnet gap and voice coil against moisture and corrosion and
heatsinks the voice coil to the magnet structure for greater
power handling, assuring long speaker life under difficult environmental conditions. With MLS, the centering actually
becomes more accurate as the music becomes louder.
™
4
A6, A6T
Unparalleled Performance
❶
NEAR speakers lead the industry
in metal speaker technology.
A NEAR speaker is unique
because of its:
❶ Advanced rubber compound
cone surround
❷ Metal Diaphragm Technology
❸ Magnetic Liquid Suspension
❹ Sealed Magnet
NEAR (New England Audio Resource)
is a brand of Bogen Communications, Inc.
❷
❸
❹
®
NEAR A-SERIES LOUDSPEAKERS
A12
The A12 is a high-power speaker that projects well in far-field applications as well as in more intimate settings.
A built-in transformer means one speaker will work with 70V or 16-ohm systems. Dual metal-alloy mid/bass
drivers and a Mylar high-frequency compression driver combine to minimize distortion and provide precise
sound reproduction at any volume level.
From gold-plated input connectors to the patented Metal Diaphragm Technology (MDT) used in the two
6-1/2" drivers, all components of the A12 are designed with the goal of providing outstanding reliability and
performance for years down the road - without compromising top-quality sound. Even the woofer frames and
exterior housing have been designed to maximize sound quality and durability.
®
The NEAR A12 High-Output, Long-Throw Loudspeaker is the latest addition to the A-Series family
of loudspeakers. Engineered to the same high standards, the A12 provides deep, rich bass and smooth
highs as a complement to other NEAR loudspeakers.
NEAR SPEAKERS
High-Output, Long-Throw Loudspeaker
The A12 is ideal for both music and voice reproduction, and its powerful, highly directional output and
weatherproof design make it the perfect speaker for sound reinforcement in outdoor venues like theme parks,
amphitheaters, and sports fields.
Product Features:
• Dual 6-1/2'' LF driver with horn-loaded HF driver
• One model for both 70V systems & low-impedance (16-ohm) systems
• Dual metal-alloy MDT™ mid/bass speaker cones are extremely
stable in all environments
• Patented MLS™ Ferrofluid voice coil suspension replaces
distortion-causing mechanical spider
• Rigid MDT diaphragm design delivers clear sound & low distortion
• Dual-layer voice coil with separate inner and outer windings for
improved thermal path
• Horn-loaded compression driver features Mylar diaphragm for
long-term, consistent performance
• High sensitivity and power handling for unmatched sound coverage
• Vented cabinet with specially-designed
vent covers that resist water entry
• Improved compound rubber surrounds
resist UV rays, chemicals, and salt spray
• Corrosion-resistant woofer frames and
mounting hardware for long-lasting
“like new” appearance
• Attractive styling with patented “armadillo”
ridges improve durability as well as sound
• Gold-plated, rustproof input connectors
• Optional multi-angle tilting bracket
for pole/wall mounting
Accessories
TMA812
Tilt
Mount
Adapter
Stainless
Steel
(For A8 and A12 models)
BLACK
ONLY
NEAR A-Series & A12 Loudspeaker Technical Specifications
Drivers
Frequency
Response †
A2*
6" metal-alloy
hard anodized
woofer;
1/2" polycarbonate
tweeter
55 Hz20 kHz
A2T*
A6*
A6T*
A8*
A8T*
A12
6" metal-alloy
hard anodized
woofer;
1-1/8" pure titanium
low diffraction
inverted tweeter
50 Hz20 kHz
8" metal-alloy
hard anodized
woofer;
1-1/8" pure titanium
low diffraction
inverted tweeter
45 Hz20 kHz
(2) Metal Composite
6-1/2" Woofers,
1.9" Mylar
HF Diaphragm
55 Hz17.5 kHz
Sensitivity
(1W @ 1 meter)
88 dBspl
89 dBspl
91 dBspl
94.5 dBspl
Dispersion
Impedance
Power
Handling
Horizontal:
80 degrees;
8-ohm
100 watts
Vertical:
80 degrees
70V
(16W, 8W, 4W
tap settings)
Horizontal:
110 degrees;
8-ohm
Vertical:
45 degrees (up),
35 degrees
(down)
70V
Horizontal:
100 degrees;
8-ohm
Vertical:
35 degrees (up),
45 degrees
(down)
70V
Horizontal:
90 degrees;
Vertical:
45 degrees
16 watts
Design
Type
Coaxial
2-way
(32W, 16W, 8W
tap settings)
175 watts
* Colors specified by adding suffix to model number: BLK (black), GRN (green), or WHT (white).
† (-10 dB)
64 watts
(64W, 32W, 16W
tap settings)
225W at 16-ohm,
128W at 70V
(128W, 64W, 32W,
16W, 8W tap settings)
8 lb.
10 lb.
13-7/8" W
x
7-1/8" H
x
7-3/4" D
11 lb.
12 lb.
(with bracket)
2-way
16-ohm/
70V
9" W
x
8" dia.
x
8-1/4" D
Product
Weight
(with knob & bracket)
150 watts
32 watts
Dimensions
www.bogen.com
Model*
17-7/8" W
x
10-1/4" H
x
10" D
18 lb.
20 lb.
(with bracket)
2-way,
3-Driver
10-1/4" W
x
17-7/8" H
x
11-3/4" D
22 lb.
5
CEILING SPEAKERS
SPEAKERS
High-Fidelity
Ceiling Speakers
HFCS1, HFCS1LP
Bogen’s coaxial 2-way, High-Fidelity
Ceiling Speakers deliver unsurpassed
performance and value.
HFCS1
HFCS1LP
Product Features:
• High power handling capability for
foreground sound
• Selectable power taps via front-mounted
rotary control under grille
• Easy wiring with 4-terminal snap-on input
connector (providing loop-through)
• 3/4" durable polycarbonate tweeter cone
• 6-1/2" highly stable polypropylene cone
• Sensitivity: 89 dBspl @ 1W/1m
• Off-white ABS baffle ring and perforated
steel grille (both paintable)
• Attachment point for seismic cable
• Fire-rated (94VO) ABS baffle
• Listed to UL Standard 60065 for US & Canada
• Installs into a variety of ceiling environments
including suspended ceilings and hard-surfaced
ceilings
• Large steel back can for extended bass
response (HFCS1)
• Low-profile housing allows greater range of
installation depths (HFCS1LP)
• Computer-matched venting system for excellent
bass output
• Wide dispersion coaxial driver provides broad,
even coverage
• Good off-axis response with smooth contouring
• Easy-to-install mounting system for a variety
of ceiling types
Accessories
CK10
10 ft. Cable
Kit (Silver)
TBCR
Tile Bridge
Support Ring
OPENING DEPTH
Te c h n i c a l S p e c i f i c a t i o n s :
Impedance
Model
HFCS1/
HFCS1LP
Frequency
Response
Dimensions
Product
Weight
HFCS1:
HFCS1:
HFCS1:
65 Hz-19 kHz
12-5/16" dia. x 12" D
9 lb.
HFCS1LP:
HFCS1LP:
HFCS1LP:
Power Handling
16 ohms
75W
70V
32, 16, 8, 4, 2, & 1 W taps
100V
32, 16, 8, 4, & 2 W taps
78 Hz-19 kHz 12-5/16" dia. x 7-3/4" D
8 lb.
11"
6.75"
HFCS1
HFCS1LP
Mini Pendant Speaker
www.bogen.com
MPS1
The Bogen MPS1 Mini-Pendant Speaker is an excellent
choice for high ceiling and open space environments.
Product Features:
MPS1B
MPS1W
2 COLOR CHOICES*:
BLACK
WHITE
*Actual color may vary from these catalog samples.
• Wide dispersion 4-1/2" driver for broad, even coverage; superb off-axis response
• High-efficiency drivers deliver superior performance
• For 70V and 16-ohm low-impedance systems
• Computer-matched venting system for extended bass output
• High-power handling capability for foreground sound/high-ambient noise environments
• Selectable power taps via rear-mounted control; 32, 16, 8, 4, 2, 1 watts @ 70V
• Low-resonance cabinet structure improves mid-range clarity
• Central attachment point for suspension and second point provided for safety cable
• Quick & Easy wiring with snap-on connector
• Simple single point suspension method
• Powder-coated perforated steel grille
• Paintable ABS finish
Accessories CK10B
(Black)
Te c h n i c a l S p e c i f i c a t i o n s :
Model
MPS1
6
Impedance
Low (16 ohms)/
High (70V)
CK10W
Sensitivity (1W/1m)
Frequency
Response (-10 dB)
Dimensions
85 dB
(Avg. 100 Hz -10 kHz)
50 Hz-14 kHz
12" dia. x 7-7/8" H
Product
Weight
5 lb.
(Off-white)
CK10
(Silver)
10 ft. Cable Kits
CEILING SPEAKERS
High-Fidelity Ceiling Subwoofer
The Bogen CSUB Ceiling Subwoofer delivers outstanding bass response in
both suspended ceiling and sheetrock installations. The CSUB can provide
deep, rich bass response to any speaker system. Perfect accompaniments
to the CSUB are Bogen’s HFSF1 and HFCS1/LP ceiling speakers, as well as
NEAR’s OCS1 ceiling loudspeaker.
The CSUB offers six levels of power output settings plus an 8-ohm position
controlled via a front-mounted, rotary tap selector switch (under grille). The lowdistortion speaker design, coupled with a computer-matched venting system,
delivers exceptional low-frequency response for music. The mechanical CSUB
design features four swing-out mounting clamps that eliminate the need for
a separate tile bridge when used in suspended ceiling applications.
SPEAKERS
CSUB
Product Features:
•
•
•
•
•
•
•
•
•
•
•
Flat bass response down to 40 Hz
Computer-matched venting system for full bass output
11" deep enclosure clearance
Integral swing-out mounting clamps eliminate need
for tile bridge
High power handling capability for foreground sound
Selectable power taps via front-mounted control
Power taps: 64, 32, 16, 8, 4, and 2 watts @ 70V
8-ohm selector position for low-impedance systems
Compound rubber surround for lasting performance
Easy wiring with plug-in connector providing
loop-through terminals
Fire-rated (94VO) ABS baffle
• Attachment point for seismic safety cable
• Input terminal cover with conduit knockout
• Attractive, contemporary, sturdy steel
grille assembly with fine perforations
• Off-white, paintable finish
• Listed to UL Standard 60065
for US and Canada
Accessories
CK10
10 ft.
Cable Kit
(Silver)
Te c h n i c a l S p e c i f i c a t i o n s :
Impedance
8 Ω Nominal
Frequency
Response
Dimensions
Product
Weight
40 Hz -125 Hz
15-1/2" dia.
x
12-1/2" D
20 lb.
Power Handling Sensitivity
150W (8 Ω)
70V Settings 64, 32, 16, 8, 4,
2W taps (70V)
91 dBspl
@ 1W/1m
High-Fidelity Ceiling Speaker
HFSF1
The low-distortion, coaxial-design speaker, coupled with a computer-matched venting
system, delivers superb fidelity for music as well as high intelligibility for voice reinforcement. Coupled with the Bogen CSUB Ceiling Subwoofer, it provides the perfect solution for
environments that require the highest-quality sound with minimal visual impact.
Product Features:
• Superior sound in a very compact enclosure
• Wide-dispersion coaxial driver for broad,
even coverage; superb off-axis response
• Small footprint, visually appealing
• Only 6-1/4" diameter ceiling opening required
• Installs in wide range of ceiling types
• For 70V and low-impedance systems
• Selectable power taps via control mounted under
grille; 16, 8, 4, 2, 1 watts at 70V
• 16-ohm selector position for low-impedance systems
• Quick wiring with removable plug-in connector
providing loop-through terminals
• Attachment point for seismic safety cable
• Input terminal cover with conduit knockout
• Fire-rated (94VO) ABS baffle
Accessories
• Compound rubber surround for
lasting performance year after year
• Integral mounting clamps tighten
quickly and firmly
• Tile bridge (TBSF) accessory recommended
for suspended ceiling installations
• Off-white, paintable finish
• Listed to UL Standard 60065
for US and Canada
CK10
10 ft. Cable Kit
(Silver)
www.bogen.com
The Bogen HFSF1 High-Fidelity, Small-Footprint Ceiling Loudspeaker delivers
superior sound in a very compact enclosure. The speaker is unobtrusive at only
7-1/4" in diameter, and mounts easily in all types of ceilings including existing
hard-surface types and suspended ceilings.
TBSF
Tile Bridge
Support Ring
Te c h n i c a l S p e c i f i c a t i o n s :
Impedance
16 Ω Nominal
70V Settings
Power Handling Sensitivity
Frequency
Response
Dimensions
Product
Weight
78 Hz - 20 kHz
7-1/4" dia.
x
7-1/2" D
4.5 lb.
50W (16Ω)
86 dBspl
16, 8, 4,
@ 1W/1m
2, 1W taps(70V)
7
DROP-IN CEILING SPEAKERS
Bogen's Drop-In Ceiling Speakers are full-range loudspeakers that allow fast and simple installation, which saves time, effort, and
cost. Depending on whether your ceiling grid is 2' x 2' or 2' x 4', the speaker can be dropped directly into place or by simply making a
single cut to the ceiling tile, placing the tile support rail, and then inserting the speaker into position.
CSD1X2NB(U), CSD1X2NBVR(U)
70V and 25V Operation
70V and 25V Operation
• 1ft. X 2ft. with back can enclosure
• 4-watt, 70V/25V transformer
• 4, 2, 1, 1/2, & 1/4-watt tap settings;
selectable by rotary switch
• Fully enclosed, industrial grade steel construction
• 8" main cone with secondary high-frequency
cone; 10 oz. magnet weight
• Plenum-rated — meets requirements
of UL standard 2043 for
smoke and heat release
(report available online)
Tile
• Front-mounted, recessed Support Rail
volume control versions
(included)
available (VR)
• Listed to UL Standard 1480 for US
• 1ft. X 2ft. exposed driver (no back can enclosure)
• 4-watt, 70V/25V transformer
• 4, 2, 1, 1/2, 1/4, & 1/8-watt taps; selectable
by stripped & tinned wire leads
• Industrial grade steel construction
• 8" cone speaker; 6 oz. magnet weight
• Front-mounted, recessed
volume control versions
available (VR)
Tile
Support Rail
CSD2X2(U), CSD2X2VR(U)
CSD2X2L(U)
70V and 25V Operation
Low-impedance (8-ohm) Operation
• 2ft. X 2ft. with back can enclosure
• 4-watt, 70V/25V transformer
• 4, 2, 1, 1/2, & 1/4-watt tap settings;
selectable by rotary switch
• Fully enclosed, industrial grade steel
construction
• 8" main cone with secondary highfrequency cone; 10 oz. magnet weight
• Plenum-rated — meets the
requirements of UL standard
2043 for smoke and heat
release (report available
online)
• Front-mounted, recessed
volume control versions
Tile
available (VR)
Support Rail
• Listed to UL Standard
(included)
1480 for US
• 2ft. X 2ft. with back can enclosure
• Low-impedance: 8-ohm speaker,
15W maximum power
• Fully enclosed, industrial grade steel
construction
• 8" main cone with secondary highfrequency cone; 10 oz. magnet weight
• Plenum-rated — meets the
requirements of UL standard
2043 for smoke and heat
release (report available
online)
• Listed to UL Standard
1480 for US
Tile
Support Rail
CSD1X2
CSD1X2U
CSD1X2VR
CSD1X2VRU
CSD1X2NB
CSD1X2NBU
CSD1X2NBVR
CSD1X2NBVRU
Model
Product
Weight
CSD2X2
CSD2X2U
12-1/4" W x 5" H x 24" D
10 lb.
CSD2X2VR
CSD1X2NB/VR
12-1/4" W x 3-1/4" H x 24" D
7 lb.
CSD2X2VRU
CSD2X2/VR/L
24" W x 4-7/8" H x 24" D
12 lb.
CSD1X2/VR
8
Dimensions
CSD2X2L
CSD2X2LU
NOTE: For Bright White versions, add "U" to end of model number.
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
● ●
●
●
● ●
●
●
● ●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
8-ohm (L)
(15W max.)
Impedance
70V/25V
(4W max.)
Off-white
Grille
Color
Bright White (U)
Model
2 ft. x 2 ft.
Speaker
Size
All Drop-In Ceiling Speakers Feature:
VR Versions (with front-mounted recessed volume control)
•Fully Enclosed
Driver
(included)
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Recessed Volume
Control (VR)
•Fully Enclosed
Driver
• Finely perforated grille over entire front of speaker
• Tile Support Rail crossbar (included) for use with
2' x 4' and 2' x 2' suspended tile ceilings
• Bright White ("U" versions)
or Off-white finish
Now available in
Bright White & Off-white
• Seismic attachment points
•Exposed Driver
without Back Can
(included)
Exposed Driver (NB)
•Fully Enclosed
Driver
Speaker Back Can
CSD1X2(U), CSD1X2VR(U)
1 ft. x 2 ft.
www.bogen.com
SPEAKERS
Drop-In Ceiling Speakers
●
●
●
●
●
●
CEILING SPEAKER ASSEMBLIES
S86T725PG8W(U)
Bogen ceiling speaker assemblies consist of
an 8" cone speaker (S86 or S810) mounted in
an enamel, steel-finished ceiling grille
(PG8W or PG8U) with a transformer (T 725).
The assemblies are available in several
options, as outlined here:
• No Volume Control –
S86/S810T725PG8W*
S810T725PG8W(U)
& Variations
SPEAKERS
& Variations
Ceiling Speaker Assembly Variations
FRONT
VIEW
• Recessed Volume Control –
S86/S810T725PG8WVR*
Now available in
Bright White (“U” versions)
& Off-white (“W” versions)
recessed
volume
control
Bogen’s Ceiling Speaker Assemblies consist of an 8" Cone Speaker (S86 or S810)
pre-assembled onto a 13" steel ceiling grille painted with off-white (PG8W) or
bright white (PG8U) enamel. Options for these assemblies are recessed volume
control (VR), volume control with knob (VK), and rear-mounted screw terminal
strip for power taps (BR).
• Volume Control Knob –
S86/S810T725PG8WVK*
Product Features:
• 4-watt capacity
• 8" cone speaker for excellent audio quality
• 6 different power taps available (4, 2, 1, 1/2, 1/4, 1/8 W)
• T725 4-watt transformer
• Pre-assembled for faster installation
• Off-white enamel over steel grille (“W” versions)
• Bright white enamel over steel grille (“U” versions)
• Works with both 70V and 25V amplifier outputs
volume
control
knob
S86T725PG8WVK
6 oz.
50 Hz12 kHz
95
dBspl
●
S86T725PG8WBRVR
●
S86T725PG8WBRVK
●
●
●
* Replace "W" with "U" for
Bright White grille color models.
Accessories
RE84
28 lb. /
carton
Ceiling
Speaker
Enclosure
MR8
Mounting
Ring
●
S810T725PG8W
S810T725PG8WVK
Screw Terminals (BR)
●
●
Shipping
Weight
(6/carton)
27 lb. /
carton
●
S86T725PG8WVR
S810T725PG8WVR
Volume Control
w/Knob (VK)
●
S86T725PG8W
S86T725PG8WBR
Recessed Volume
Control (VR)
No Volume
Control
Sensitivity (4ft./1W)
Frequency Response
Magnet Weight
Model
REAR
VIEW
screw
terminals
10 oz.
70 Hz15 kHz
96
dBspl
www.bogen.com
• Available with volume control – recessed or knob (VR & VK models only)
• Screw terminals (BR models only)
Dimensions:
13" dia. x 3-1/4" D
• 6 oz. or 10 oz. magnet weights
• Screw Terminal Strip –
S86T725PG8WBR*
●
●
NOTE: For Bright White versions, replace the “ W” in each model number with a “ U”.
30 lb. /
carton
TB8
Tile Bridge
9
METAL BOX SPEAKERS
SPEAKERS
Metal Box Speakers
MB8TSL, MB8TSLVR,
MB8TSQ, MB8TSQVR
MB8TSL
Bogen’s Metal Box Speakers feature all-steel construction,
surface-mounted enclosure with an 8" cone loudspeaker
and 4-watt 70V/25V transformer. The MB8TSL is designed
primarily for wall mounting, and its face is angled downward
12.5 degrees. The MB8TSQ is suitable for ceiling or wall
mounting. “VR” versions include a recessed volume control.
MB8TSQ
Product Features:
• Rugged all-steel, surface-mounted, off-white painted enclosure
• Full-range 8" cone speaker for excellent intelligibility
• Compatible with 70V/25V amplifier systems
MB8TSQ
• 4-watt maximum power
• 6 power taps available (4, 2, 1, 1/2, 1/4, 1/8 watts)
• Mounting hardware included
• Wiremold® knockouts
• "VR" versions include a recessed volume control
Models
Sensitivity
Front Panel
Design
Frequency
Response
(dBspl @ 1W)
Slant/Angle
110 Hz -15 kHz
96
MB8TSL
Dimensions
SIDE
VIEW
VR versions
(with recessed volume
control in center)
Product
Weight
11-5/8" W x 11-3/8" H x 5-3/8" D
MB8TSL/VR
(Top Dimension)
11-5/8" W x 11-3/8" H x 3-1/8" D
9 lb.
(Bottom Dimension)
MB8TSQ/VR Square/Flat
110 Hz -15 kHz
96
11-5/8" W x 11-5/8" H x 4-1/4" D
9 lb.
Wiremold® is a registered
trademark of Wiremold/Legrand.
WALL BAFFLE SPEAKERS
www.bogen.com
WBS8T725, WBS8T725V, WBS8T725BR,
WBS8T725BRV, WBS810T725
Bogen Wall Baffle Speakers consist of 8" cone speakers (S86 or S810) pre-assembled
into a simulated walnut-finished wooden enclosure with a black grille cloth on front.
These wall baffles are handsomely styled and ruggedly built with 3/8" particle board
reinforced at the corners. Designed for wall mounting, the face is angled downward
13.5 degrees. Recessed volume control and terminal strip are available options on
the WBS8T725 model.
Product Features:
SIDE
VIEW
10
• 4-watt capacity
• 6 power taps available (4, 2, 1, 1/2, 1/4, 1/8 watts)
• Simulated walnut finish
• Works with both 70V and 25V amplifier outputs
• Pre-assembled for faster installation
• 8" cone speaker for excellent
audio quality
• 6 oz. or 10 oz. magnet weights
• Recessed volume control available
(V models only)
• Screw terminals available
(BR models only)
• Easy wall-mount installation
• Mounting hardware included
Dimensions
9-1/2" W x 9-1/2" H x 5-1/4" D
(3-1/4" D @ bottom)
FOREGROUND SPEAKERS
FG-Series Speakers
Product Features:
• 15-, 20-, and 30-watt models
• Smooth, wide frequency response
• Compact and rugged plastic cabinets
• Works with both 70V and 8-ohm
speaker systems
• U-Mounting bracket included
• Rotary switch-selected power
rating for 70V systems
• Splashproof for use in damp
environments (FG20S only)
• FG15 available in Black (B)
and Off-white (W)
FG15B
FG15W
(Black)
(Off-White)
FG30,
FG20S
SPEAKERS
The FG-Series of 2-way speakers is designed to deliver high-quality,
wide frequency response audio in a compact cabinet. Perfect for
supplying foreground as well as background music, the speaker line
is available in three power ratings.
Accessories
FGSM
FGSMW
Swivel Mount
(Black)
Swivel Mount
(Off-white)
SOUND COLUMNS
SCW20, SCW35
Bogen's Sound Columns provide effective sound reinforcement for installations with large areas,
using a minimum number of speakers. Each column has a vertical array of speakers producing
a highly directed sound dispersion pattern for reduced reflection from the room's floor and ceiling.
Product Features:
• 20- or 35-watt models
• Works with 8-ohm speaker systems
• Four 5" speakers (SCW20) or six
6" speakers (SCW35)
• Controlled sound projection
• Uniform sound level & reduced feedback
www.bogen.com
SCW35
• Clear and intelligible speech reproduction
• Polarized screw terminals
• Acoustically lined, particle board
construction: 3/8" (SCW20), 1/2" (SCW35)
• Simulated oiled walnut, black grille
• Mounting hardware included
SCW20
FLANGE-MOUNTED HORN SPEAKER
FMH15T
The Bogen FMH15T is a flange-mounted, high-intelligibility, reentrant-type loudspeaker.
Its sturdy, weatherproof, vandal-resistant, all-metal construction is ideal for indoor and
outdoor use. It has a built-in tap selector switch for selecting the speaker power in
70V or 25V constant-voltage systems.
Product Features:
• Excellent efficiency and voice intelligibility • Vandal-resistant accessory components
for hostile-environment applications
• Weather-sealed tap selector switch
• Heavy-duty cast aluminum grille (SGHD8)
• 15 watts max. @ 70V or 25V
and adapter ring (FMHAR8) for installation
(each sold separately)
• Select flush (BBFM6) or surface (BBSM6)
mount enclosure for installation (each
• All-metal with black enamel finish
sold separately)
Accessory Components
BBSM6
BBFM6
SurfaceMount
Enclosure
FlushMount
Enclosure
(11" W x 11" H
x 6" D)
(9-7/8" W
x 9-7/8" H x 6" D)
SGHD8
FMHAR8
Heavy-Duty
Grille
Adapter
Ring
(11" W x 11" H
x 1/2 " D)
11
SPEAKERS
Special Protection
The SPT15A, SPT30A, BDT30A and
KFLDS30T use a cast aluminum end
bell specially designed to make them
weatherproof. A rotary selector switch
is used to set the specific power tap for
the speaker. This switch’s entry into the
end bell is sealed by a special mounting nut with an integral O-ring. A removable plastic panel protects both
the rotary switch and the electrical
connections. This panel provides a
narrow opening for the speaker wires
to exit, reducing the chance of water
infiltration.
Tilt & Swivel Base
www.bogen.com
Bogen’s 15- and 30-watt horns include
a unique and easy-to-use tilt and
swivel mounting base that provides
nearly 180 degrees of tilt and a full 360
degrees of swivel. A single wing nut
locks in the angle of the speaker. Loosening the wing nut frees the speaker
in each rotational axis, making it fast
and easy to precisely aim the speakers
where the sound is needed. The base
provides three holes for screw mounting and a slot to allow strapping the
speakers to beams. The actual mounting base can easily be removed so that
the base can be installed separately.
The speakers can then be attached to
the bases at a later time.
SPT5A,
SP58A
SPT15A, SP158A,
SPT30A , SP308A
+
Accessories
BC1
Beam Clamp
Terminal Cover
for Conduit
(For BDT30A, KFLDS30T,
SP158A, SP308A, SPT15A,
& SPT30A)
HSES10
Horn Speaker
Electrical Box Strap
(pack of 10)
(Not for SP58A & SPT5A)
+
BDT30A*
Bogen’s Horn Loudspeakers offer high efficiency
and excellent intelligibility. Rotary switch-selected
power taps make installation quick and easy.
SPT and BDT models are compatible with 70V and
25V paging systems, SP models are 8-ohm
versions. The KFLDS30T is a 70V/25V wide dispersion, high-intelligibility, reentrant type loudspeaker.
The IH8A is a paging horn.
Product Features:
• Maximum speaker power capacities of 7.5, 15, and 30 watts
• Rotary switch-selected power taps on transformer models
• Constant voltage (70V/25V) and 8-ohm versions
(KFLDS30T and BDT30A are 70V/25V only)
• Tilt & swivel base for easy positioning
• Sturdy, all-metal construction with mocha enamel finish
(KFLDS30T horn flare is constructed of polycarbonate)
• Weatherproof design
• Twin reentrant horns for bi-directional projection (BDT30A only)
• KFLDS30T provides wide-angle projection with a rotatable
horn flare
+ For style only, product is larger
* Some assembly required
TCSPT1
12
HORN LOUDSPEAKERS
KFLDS30T
IH8A
ATTENUATORS
Bypass Feature
AT10A, AT35A
& ATP10, ATP35
Both Attenuator Series (AT and ATP) allow the output
level of a group of loudspeakers to be set from a wallmounted volume control, without affecting overall
amplifier volume settings. The ATP-Series also has a
priority bypass function which overrides the volume
control knob to provide full volume audio to the speakers.
AT35A
AT10A
Product Features:
• Adjusts loudspeaker output levels on 25V & 70V systems
• 2 Models control up to 10-watt or 35-watt speaker systems
• Priority override of volume/Emergency Bypass feature
(ATP models)
• 10 Attenuation steps and an off setting
• Mounts in standard electrical box; single (AT10A, ATP10)
or double (AT35A, ATP35)
• Simple connections
ATP35
Model
Power
Rating
Gang
Box
AT10A
10 watts
Single
2-3/4" W x 4-1/2" H x 2-3/4" D
13 oz.
AT35A
35 watts
Dual
4-5/8" W x 4-5/8" H x 3" D
14 oz.
ATP10
10 watts
Single
2-3/4" W x 4-1/2" H x 2-5/8" D
13 oz.
ATP35
35 watts
Dual
4-5/8" W x 4-5/8" H x 3" D
14 oz.
Emergency
Bypass
●
●
Product
Weight
Dimensions*
ATP10
To ensure critical messages are heard, the
ATP-Series Attenuators include a Bypass
Function that sets emergency messages to
full volume - to all speakers the attenuator
controls - even if the speakers’ volume control knobs are set low or off. A trip voltage of
between 9V and 30V DC causes the attenuator to bypass the volume control function
and provides full volume audio to the
speakers. This is a critical and ideal function in emergency situations when a message must be sent to all individuals in a
building.
SPEAKERS
In certain rooms such as training or conference rooms where meetings or presentations are held, paging announcements
are considered interruptions. To avoid or
eliminate such interruptions, speakers installed in these rooms may use attenuators
to set speaker volume low or off. In these
cases, emergency messages would not be
heard by individuals in these rooms.
*Depth from front of plate
VANDAL-RESISTANT SPEAKERS
Extreme Human Environments
VRS1, VRS2
The VRS-Series features an 11-gauge
stainless steel faceplate (#1). That’s a solid
1/8"of the hardest steel around.
EXPLODED VIEW
VRS1
(see sidebar)
VRS2
❹
Product Features:
What Tough Is (Exploded View)
❸
❷
❶
• Withstands attempts at vandalism in hostile environments
• Four layers of defense: ❶ a heavy-duty 11-gauge stainless steel faceplate, ❷ a baffled
steel guard protects the speaker from puncture, ❸ a finely perforated screen stops
thin, flexible objects from damaging the moisture-resistant plastic speaker cone,
and ❹ weather-resistant cone
• Grille openings are cross-positioned so that nothing can enter the speaker, not even
the smallest or sharpest objects
• Unbreakable metal call button (VRS1 only); VRS2 available without call button
• Optional low-impedance, 8-ohm speaker operation
• Mounts with one-way security screws (included)
Shipping
Dimensions
Weight
• 1/2-Watt speaker power on 25V speaker line
4 lb.
5-1/2"
W
x
7-3/4"
H
x
1-3/4"
D
• 3" Weather-resistant cone speaker
Behind that, there’s a heavy-duty steel
barrier (#2) which is designed to let sound
out and nothing in. The barrier is baffled
so that knives, nails, paper clips, and anything else that might fit into the grille
openings will not enter the speaker nor
make contact with the speaker’s cone.
www.bogen.com
These Vandal-Resistant Speaker assemblies ensure
that sound communication gets through reliably, despite
being located in environments susceptible to damage
and destruction. The assembly includes a 3" plastic cone
speaker, securely located and protected behind steel
barriers. Available with or without call button.
It takes a specially-engineered speaker to
stand up to the extreme abuse of human
beings. The VRS-Series has been installed in some of the most demanding
applications, from high-crime area dooranswer systems to some of the most notorious correctional facilities.
Then for further protection, a finely perforated metal grille (#3) covers the entire
speaker to intercept any object that might
snake its way through the baffles of the
steel barrier.
The VRS-Series not only keeps objects
out, but fluids also cannot damage the
speaker because the speaker’s cone is
made of weather-resistant plastic (#4).
13
CONE SPEAKERS
S86, S86T725, S86T725BR, S810, S810T725
SPEAKERS
Bogen offers 8" Unmounted Cone Speakers with 6 or 10 oz. magnets,
with or without speaker transformers.
Product Features:
• Works with both 70V and 25V amplifier outputs (models with transformers)
• 8" cone speaker for excellent audio quality
• Easy to install in wall baffles or ceiling grilles (see below)
Model
Speaker
Magnet
Weight
Frequency
Response
Sensitivity
Power Taps
(in Watts)
Connections
Dimensions
Shipping Weight
(16/carton)
S86
S86
6 oz.
50 Hz - 12 kHz
95 dBspl
8 ohms @ 7W
Push-on Lugs
8" Dia. x 3-1/4" D
25 lb. / carton
S86T725
S86
6 oz.
50 Hz - 12 kHz
95 dBspl
4, 2, 1, 1/2, 1/4, 1/8
Wire
8" Dia. x 3-1/4" D
32 lb. / carton
4, 2, 1, 1/2, 1/4, 1/8
Screw Terminal
8" Dia. x 3-1/4" D
36 lb. / carton
Push-on Lugs
8" Dia. x 3-1/2" D
34 lb. / carton
Wire
8" Dia. x 3-1/2" D
50 lb. / carton
S86T725BR
S86
6 oz.
50 Hz - 12 kHz
95 dBspl
S810
S810
10 oz.
70 Hz - 15 kHz
96 dBspl
S810T725
S810
10 oz.
70 Hz - 15 kHz
96 dBspl
8 ohms @ 15W
4, 2, 1, 1/2, 1/4, 1/8
GRILLES
CG8AW, SG8W, PG8A,
PG8W, PG8U
A
www.bogen.com
Bogen provides a wide selection of attractive
Ceiling Grilles in off-white or bright white enamel
and aluminum finishes. Each grille is shipped
with the hardware needed to mount a speaker
to the grille.
SG8W*
CG8AW
PG8A
D&E
Quantity
Shipping
Weight (carton)
Model
Figure
Material
Finish
Style
Diameter
CG8AW
A
Aluminum
Off-white Enamel
Contoured
12-5/8"
15 / carton
9 lb.
SG8W
B
Steel
Bright White Enamel
Low Profile*
13"
10 / carton
14 lb.
PG8A
C
Aluminum
Satin Aluminum
Low Profile
13"
20 / carton
12 lb.
PG8W
D
Steel
Off-white Enamel
Low Profile
13"
20 / carton
26 lb.
PG8U
E
Steel
Bright White Enamel
Low Profile
13"
20 / carton
26 lb.
PG8W (shown),
PG8U
* Features hidden speaker mounting studs
WALL BAFFLE
WB8
Bogen’s Wall Baffle is ruggedly constructed of 3/8" particle
board with reinforced corners. It is finished in simulated walnut
and will house any Bogen 8" speaker. A sloping front panel
(13.5 degrees) provides enhanced downward dispersion.
Hardware for mounting a speaker to the baffle included.
Dimensions
9-1/2" W x 9-1/2" H x 5-1/4" D
(3-1/4" D at bottom)
14
C
B
Shipping Weight
(4/carton)
10 lb. / carton
SIDE
VIEW
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising