PCI-1601 PCI-1602
PCI-1601
PCI-1602
PCI-1603
2-port RS-422/485 Universal PCI Communication Card
2-port RS-422/485 Universal PCI Communication Card
with Isolation Protection
2-port RS-232/Current-loop Universal PCI Communication
Card with Isolation Protection
Features
ƒƒ PCI bus 2.2 compliant
ƒƒ Supports serial speed up to 921.6 kbps, and any baud rate setting
ƒƒ 2-port RS-422/485 interface (PCI-1601/PCI-1602)
ƒƒ 2 independent RS-232 or Current-loop serial ports (PCI-1603)
ƒƒ I/O address automatically assigned by PCI Plug & Play
ƒƒ OS supported: Windows 2K/XP/Vista/7, Windows CE 5.0/6.0, Linux, and QNX
ƒƒ Interrupt status register for increased performance
PCI-1601
PCI-1602
PCI-1603
RoHS
COMPLIANT
2002/95/EC
Introduction
The PCI-1601 and PCI-1602 are two RS-422/485 PCI communication cards that are compatible with the PCI 2.2 bus specification. Both cards provide EFT protected RS-422/485 ports,
and come with features such as: high transmission speed of 921.6 kbps, optional isolation protection, windows utility software and more. The cards also come with high-performance
OXuPCI952 UART with a 128-byte FIFO to reduce CPU load. This makes the PCI-1601 and PCI-1602 especially suitable for multitasking environments.
The PCI-1603 offers a versatile range of high-speed interfacing options. You can switch its ports between the popular RS-232 or noise-resistant current-loop. The card utilizes
OXuPCI952 UART with 128-byte FIFO buffer for faster and more reliable communication, especially under multi-tasking environments such as Windows operating systems. The card
utilizes OXuPCI952 UART that buffers data into packets before sending it to the bus. This drastically reduces CPU load and avoids data loss when the system is busy and cannot
process an interrupt quickly. These FIFO buffers make the PCI-1603 especially suitable for high speed serial I/O under Windows.
Specifications
Protection
General
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Bus Type
Certification Connectors
Dimensions (L x W)
Power Consumption
Universal PCI v2.2
CE, FCC class A
2 x Male DB9
123 x 92 mm (4.8" x 3.6")
300 mA @ +5V
Current-loop Interface (PCI-1603)
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Baud-rate
50 ~ 57600 bps
Current Value
20 mA (Standard)
Mode
Asynchronous, full duplex
Signal Driver/Receiver 6N136
Signals
TxD+, TxD-, RxD+, RxDTransmission Distance 1,000 m (RS-422/485 mode only)
Communications
ƒƒ Communications
Controller
ƒƒ Data Bits
ƒƒ Data Signals
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
FIFO
Flow Control
IRQ
Parity
Speed ƒƒ Stop Bits
OXuPCI952
5, 6, 7, 8
RS-422: Tx+, Tx-, Rx+, Rx-, RTS+, RTS-, CTS+, CTS-,
GND
RS-485: Data+, Data-, GND
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
128 bytes
RTS/CTS. Xon/Xoff
Assigned by Plug & Play
None, Even, Odd, Mark and Space
50 bps ~ 921.6 kbps, any baud rate setting
230.4 kbps (PCI-1601B, PCI-1602 and PCI-1603 in
Current-loop mode only)
1, 1.5, 2
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ESD Protection EFT Protection Surge Protection Isolation Protection 15KV
2,000 V
1,000 VDC
2,500 VDC (PCI-1602/PCI-1603 only)
Software
ƒƒ Bundled Software
ƒƒ OS Support
ICOM Tools
32-bit/64-bit Windows 2000/XP/Vista/7,
Windows CE 5.0/6.0, Linux, and QNX
Environment
ƒƒ Humidity (Operating) 5 ~ 95 % RH, non-condensing
ƒƒ Operating Temperature -10 ~ 60°C (14 ~ 144°F)
ƒƒ Storage Temperature -25 ~ 85°C (-13 ~ 185°F)
Regulatory Approvals
ƒƒ EMC
EN 55011: 2009 + A1:2010, Group 1, Class A
EN 55022: 2010, Class A
EN 61000-6-4: 2007
EN 55024: 2010
EN 61000-6-2: 2005
IEC 61000-4-2: 2008
IEC 61000-4-3: 2006 +A1: 2007 +A2: 2010
IEC 61000-4-4: 2010
IEC 61000-4-6: 2008
IEC 61000-4-8: 2009
FCC 47 CFR Part 15 Subpart B (Class B),
IC ICES-003 (2004)
Ordering Information
ƒƒ
ƒƒ
ƒƒ
ƒƒ
PCI-1601A
PCI-1601B
PCI-1602
PCI-1603
2-port RS-422/485 PCI Comm. Card
2-port RS-422/485 PCI Comm. Card w/Surge
2-port RS-422/485 PCI Comm. Card w/Iso
2-port RS-232/Current Loop PCI Comm. Card w/Iso
Serial Communication Cards
V1.1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising