Solartech SPM010P
M-Series
10W PV Module
SPM010P-A
Solartech M-Series Modules
Solartech photovoltaic M-Series Modules are
constructed with high efficient polycrystalline solar
cells and produce higher output per module than
others in it class. This industrial grade module is an
industry standard among various industry
professionals.
Features
• An UL-approved AWG 18 cable is put into the fully
sealed junction box (weather and UV resistant)
material meet UL1703
• (EVA) with TPT cushions the solar cells within the
laminate an ensures the operating characteristics of
the solar cells under virtually any climatic condition
•Rigid anodized aluminum frame and low iron
tempered glass
• Easily accessible grounding points on all four
corners for fast installation
• Proven junction box technology
Applications
Reliability
• Proven superior field performance
• Tight power tolerance
Qualifications and Certifications
•Traffic & Safety
•Federal Government
•Agricultural
•Security
•Telecommunications
•Water and Wastewater
•Weather & Environmental Monitoring
•Telemetry
•Wi-Fi & Wi-Max
•Gate & Fence
Model Number
SPM010P-A
Electrical
Characteristics
Mechanical
Characteristics
Max power(Pm)
10W
Construction
Maximum power voltage(Vpm)
17.3V
Solar Cells
Maximum power current (Ipm)
0.59A
Front Cover
Tempered glass, silicon cell, EVA, Polyester with
Tedlar
36 cells (78mm x 26mm) in a 4x9 matrix
connected in series
High transmission 3.2mm(1/8’’) glass
Short circuit current (Isc)
0.64A
Encapsulant
EVA(Double layers)
Open circuit voltage (Voc)
21.8V
Back Cover
White polyester
Module efficiency
9.5%
Frame
Anodized aluminum
Tolerance
±5%
Junction Box
IP65, UL94-5VA material
Nominal Voltage
12V
Diodes
None
Temperature coefficient of Voc
-0.36%/K
Terminal
Open end, 9 feet (3m) 18 AWG wire
Temperature coefficient of Pm
-0.46%/K
Dimensions
13.8in (350mm)x11.8in (300mm)x0.98in (25mm)
Temperature coefficient of Isc
0.05%/K
Weight
3.3b (1.5kg)
NOCT
48℃±2℃
Operating Temperature
-40℃~90℃
Maximum series fuse rating
10A
Storage Humidity
<90%
Maximum system voltage
600V
IV Curves
IV
Warranty
25-year limited warranty of 80% power output;
12 year limited warranty of 90% power output;
2-year limited warranty of materials and worksmanship*
Certifications
UL 1703 certification
ETL Class I ,Division 2,Groups C and D certification
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising