HIGH PERFORMANCE BULLET CAMERA C A U T I O N S

HIGH PERFORMANCE BULLET CAMERA C A U T I O N S
M122-EJ230-002
HIGH PERFORMANCE
BULLET CAMERA
O P E R AT I O N M A N U AL
CAUT IONS
IMP OR TA N T S A FE TY IN S TR U C TION
These servicing instructions are for use by qualified service personnel only.
To reduce the risk of electric shock do not perform any servicing other than
that contained in the operating instructions unless you are qualified to do so.
Use Class 2 Power Supply Only.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions;
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired operation.
Note This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.”
WARNING This is a class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
Caution -
Any changes or modifications in construction of this devies which are not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European
countries with separate collection systems)
This marking shown on the product or its literature, indicate that
it should not be disposed with other household wastes at the end
of its working life. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, please separate
this from other types of wastes and recycle it responsibly to promote
the sustainable reuse of material resources.
This product should not be mixed with other commercial wastes
purchased this product, or their local government office, for details
of where and how they can take item for environmentally safe
recycling.
Business users should contact their supplier and check the terms
and conditions of the purchase contract.
Household users should contact either the retailer where they for
disposal.
CAUTION
CAUTION
Thank you for choosing our high quality camera. Before
attempting to connect or operate, please read and follow
these i nstructions.
CO MP O NE NT S
1. A regulated DC12V 300mA power supply is recommended for use with
this camera for the best picture and the most stable operation.
An unregulated power supply can cause damage to the camera. When
unregulated power supply is applied,
product warranty will be out of subject.
2. It is recommended that the camera is used with a monitor that has a
CCTV quality 75 video impedance level. If your monitor is switched to high
impedance then please adjust accordingly.
3. Do not attempt to disassemble the camera to gain access to the internal
componets. Refer servicing to your dealer.
4. Never face the camera towards the sun or any bright or reflective light,
which may cause smear on the picture and possible damage to the CCD.
5. Do not remove the serial sticker for the warranty service.
M OUNT ING POS ITION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER(OR BACK). NO USER. SERVICING
TO QUALIFED SERVICE PERSONNEL.
This symbol is intended to alert the user to the presence
of uninsulated "dangerous voltage" within the product's
enclosure that may be of sufficient mangnitude to constitute
a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of
important operating and maintenance(servicing) instruction in
the literature accompanying the appliance.
VIDEO IN
TV MONITOR
Yellow (Video Out)
Black (GND Common)
Red ( DC +12V IN)
DC12V POWER SUPPLY
LEAD WIRE CONNECTION (STANDARD)
Mounting
Bracket
DC12V POWER SUPPLY
DC12V
(BLACK)
BNC FEMALE
VIDEO IN
TV MONITOR
DIY CABLE CONNECTION
Operation
Manual
13) Unplug this apparatus during lightning storms or when unused
for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Mount Guide
C ON N EC TION
Bullet
Camera
Screw 3ea
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat
registers,stoves, or other apparatus (including amplifiers)
that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding- type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete
outlet.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving
the cart/apparatus combination to avoid injury
from tip-over.
(A'ssy View)
When you install the camera, please glue up the end of
cable to keep it stable in order to protect the camera from
the humidity problems.
DI ME NS I O NS
OSD M ENU ST R U C TU R E
Unit(mm)
MAIN MENU
90.7
75.2
1st Sub MENU
1/4"-20 UNC
10.5
16.8
2nd Sub MENU
HIGH LUMINANCE
AUTO
LOW LUMINANCE
Joy-Stick
Control Rubber
3rd Sub MENU
MODE
BRIGHTNESS
MODE
BRIGHTNESS
4th Sub MENU
78.1
MODE
SHUTTER
MANUAL
62.6
AGC
RETURN
SPEED
DELAY CNT
ATW FRAME
ENVIRONMENT
RETURN
Ф23
Joy-Stick
Control Rubber
ATW
77.9
SHUT+AGC
1/50(PAL),1/100(NTSC)
USER1
Ф23
USER2
Joy-Stick
Control Rubber
PRIVACY
PIC ADJUST
MIRROR
BRIGHTNESS
CONTRAST
SHARPNESS
HUE
GAIN
RETURN
Ф23
OFF,BLC,HLC
Joy-Stick
Control Rubber
ATR
0.00, 0.50, 0.75, 1.00
OFF,ON
BURST
BURST
DELAY CNT
DAY -> NIGHT
NIGHT ->DAY
OFF,Y,C,Y/C
(000 ~ 015)
(000 ~ 015)
OFF,ON
OFF,ON
0 ~ 255
0 ~ 255
0 ~ 255
(000 ~ 255)
(000 ~ 255)
x0.50,x1.00,x1.50,x2.00
INDOOR,OUTDOOR
OFF
COLOR
B/W
DAY&NIGHT
(000 ~ 255)
NR
(000 ~ 255)
27 ~ 105
LANGUAGE
CAMERA
RESET
BACK
EXIT
SAVE ALL
OFF,ON
(000 ~ 255)
(000 ~ 255)
(000 ~ 255)
(000 ~ 255)
(000 ~ 255)
CONTRAST
ON
Ф23
BLOCK DISP
MONITOR AREA
1/4"-20UNC
SP E C IFIC A TIO N
LOW,MID,HIGH
LOW,MIDLOW,MID,
Signal Format
MIDHIGH,HIGH
Image Device
Scanning System
H Resolution.
Scanning Frequency
MOTION DET
24.8
40
(CONTROLER)
ON,OFF
1/4, 2/4, 3/4, 4/4
ON
AREA SEL
50
(000 ~ 255)
OFF,ON,ENABLE
TOP
3-Ф3.2
BOTTOM
LEFT
RIGHT
NTSC:(000 ~ 244)
PAL:(000 ~ 288)
NTSC:(000 ~ 244)
PAL:(000 ~ 288)
NTSC:(000 ~ 474)
PAL:(000 ~ 468)
NTSC:(000 ~ 474)
PAL:(000 ~ 468)
112.5
1020(H) X 508(V)
976(H) X 494(V)
976(H) X 582(V)
1/60 ~ 1/100,000 sec
1/50 ~ 1/100,000 sec
S/N Ratio
Min. Illumination
Sync System
Gamma
Video Output
OSD
BLC
2DNR
NEXT
ATR
EXIT
SAVE ALL
Function
Privacy Masking
Motion Detection
1/4"-20 UNC
Ф23
UP
Day & Night
MENU
Lens
(SELECTION KEY)
Language
1/4"-20UNC
LEFT
Operating Temperature
RIGHT
Storage Temperature
Humidity
Power Consumption
73
80.75
DOWN
When the OSD control, Rubber
Please adjust the side to put a
finger deep.
PAL
1/3” 960H SONY EXview HAD CCD II
2 : 1 Interlace
700TV Lines
15.734KHz(H), 59.94Hz(V)
15.625KHz(H), 50Hz(V)
Effective Pixels
White Balance
OFF
NTSC
Total Pixels
Electronic Shutter
RETURN
.6
EDIT MODE
RETURN
OFF
ENGLISH / 日 本 語 / DEUTSCH / FRANCAIS / Р у сск и й / PORTUGUÊS / ESPAÑOL / 中 文
ON
- Any changes m ade to t h e c a me ra s e t t in g s mu s t b e s a v e d p rio r t o e x it in g t h e O S D me n u .
Else all changes will b e d is c a rd e d .
OFF
DETECT SENS
NR MODE
Y LEVEL
C LEVEL
RETURN
*Important Note :
RETURN
Joy-Stick
Control Rubber
NTSC:(000 ~ 474)
PAL:(000 ~ 468)
MOSAIC
RETURN
R-GAIN
LUMINANCE
78.7
63.2
NTSC:(000 ~ 474)
PAL:(000 ~ 468)
RIGHT
TRANSP
PUSH LOCK
BACK LIGHT
NTSC:(000 ~ 244)
PAL:(000 ~ 288)
LEFT
1/2000,1/4000,1/10000
6,12,18,24,30,36,42,44.8
CAMERA ID
MANUAL
BOTTOM
(1 ~ 8)
RETURN
81.9
TOP
COLOR
(000 ~ 255)
(000 ~ 255)
4th Sub MENU
NTSC:(000 ~ 244)
PAL:(000 ~ 288)
1/250,1/500,1/1000
B-GAIN
R-GAIN
RETURN
B-GAIN
LEVEL
RETURN
3rd Sub MENU
ON
1/60(NTSC),1/120(PAL)
ANTI CR
66.4
26
AREA SEL
AUTO
WHITE BAL
2nd Sub MENU
1/4, 2/4, 3/4, 4/4
PUSH
62.4
28.6
1st Sub MENU
RETURN
SHUTTER/AGC
Ф
MAIN MENU
SHUT
(000 ~ 255)
AGC,OFF
x0.25,x0.50,x0.75,x1.00
Weight
Dimension(mm)
1020(H) X 596(V)
More than 50dB(AGC OFF)
0.1Lux
Internal
r= 0.45
1.0 Vp-p Composite (75Ω)
Built in (Inner Key / Joystick)
OFF / BLC / HLC
ATW / PUSH / USER1 / USER2 / ANTI CR / MANUAL / PUSH-LOCK
OFF / ON (Level adjustable)
OFF / ON (Level adjustable)
MIRROR / BRIGHTNESS / CONTRAST / SHARPNESS / HUE / GAIN
4 Zones
4 Zones
Digital D&N (Option)
Board Lens, Pinhole Lens. Varifocal Lens
ENGLISH / JAPANESE / GERMAN / FRENCH / RUSSIAN / PORTUGUESE / SPANISH /
CHANESE
14°F~122°F (-10°C~+50°C)
-4°F~140°F (-20°C~+60°C)
Less than 80%
DC12V ±10% Max. 83mA
Approx. 68g
23.0Ø x 75.2mm
Specifications and designs are subject to change for improving the functionality of this product without notice.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising