AU-D18 Analogue Stereo Lip Sync Corrector OPERATION MANUAL

AU-D18 Analogue Stereo Lip Sync Corrector OPERATION MANUAL
AU-D18
Analogue Stereo Lip Sync
Corrector
OPERATION MANUAL
Safety Precautions
Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:







Always follow basic safety precautions to reduce the risk of
fire, electrical shock and injury to persons.
To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
Never spill liquid of any kind on or into this product.
Never push an object of any kind into this product through
module openings or empty slots, as you may damage parts.
Do not attach the power supply cabling to building surfaces.
Do not allow anything to rest on the power cabling or allow it to
be abused by persons walking on it.
To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide ventilation.
Revision History
Version No
V1
Date
20100816
Summary of Change
Preliminary Release
Table of Contents
1.
2.
3.
4.
5.
6.
Introduction................................................................................... 1
Applications.................................................................................. 1
Package Contents....................................................................... 1
System Requirements................................................................... 1
Features......................................................................................... 1
Specifications............................................................................... 2
6.1 Input Audio Reference Level.......................................... 2
7. Operation Controls and Functions.............................................. 3
7.1 Top Panel....................................................................... 3
7.2 Right Panel..................................................................... 3
7.3 Left Panel....................................................................... 3
7.4 Front Panel..................................................................... 4
7.5 Rear Panel..................................................................... 4
8. Connection and Installation . ..................................................... 5
9. Acronym....................................................................................... 6
1. Introduction
The analog to analog Lip SYNC Corrector is a tiny cutie device for your audio
output delay correction. For every channel of your audio output, the Lip SYNC
corrector is able to adjust it with the best timing to display so that users may
received both video and audio with more vividly and live enjoyment. No more
lip and sound dismatch but more pleasant entertainment enjoyment. The Lip
SYNC Corrector is ease use with simple setup and an affordable unit for your
entertainment sound delay setting.
2. Applications
•
•
•
•
Home Theater
Cable TV
Set-Top-Box
Showroom display
3. Package Contents
• Lip SYNC Corrector
• 5V / 1A Power Adaptor
• Operation Manual
4. Features
•
•
•
•
Sample Rates 48 kHz
Analog to analog signal bypass
Low power consumption
Up to 24 bit resolution
1
6. Specifications
Input Port
Sample Frequency
Output Port
Input Impedance
Output Imp edance
Power Supply
ESD Protection
Dimensions(mm)
Weight(g)
Chassis Material Silkscreen Color
Operating Temperature
Storage Temperature
Power Consumption
Relative Humidity
1 x L/R
48 kHz
1 x L/R
44Kk Ω
1k Ω
5V / 1A DC ( US/EU standards, CE/FCC/UL certified)
Human body model: ± 8kV (air-gap discharge)
± 6kV (contact discharge)
42 (W) x 40.5 (D) x 22(H)
32
Plastic
White
0ºC~40ºC / 32ºF~104ºF
-20ºC~60ºC / -4ºF~140ºF
0.5 W
20 ~ 90% RH (non-condensing)
6.1 Input Audio Reference Level
Input Level /
Frequency
Output
Terminal
Reference
Level
THD+N
Analog L/R
2 Vrms / 20.1k,
20kHz
Analog L/R 2.0±0.1Vrms <0.01%
2
Frequence SNR
Response
Crosstalk
±1Vrms
<-80dB
>80dB
7. Operation Controls and Functions
7.1 Top Panel
1
)
①
POWER LED: The LED will illuminate in blue when the power is turn on.
7.2 Rear Panel
1
①
L/R IN: These slots are to connect with input source equipments such as DVD/Blue-Ray player with RCA cable for audio input signal sending.
7.3 Left Panel
1
①
L/R OUT: These slots are where you connect the amplifier or active speaker with RCA cable for audio output.
3
7.4 Front Panel
3
①
Lip SYNC switch: This switch has 8 section from 0 to 7 that allows user to
set the audio output for delay display from 0~300 millisecond.
7.5 Rear Panel
3
①
DC 5V: This slot is where you plug the 5V DC power supply into the unit and connect the adaptor to an AC wall outlet.
4
5. Connection Diagram
6. Specifications
Input Port
HDMI input Audio Format
Output Port
HDMI Output Audio Formats
Analogue Output port
Multi channel output ports
Multi channel output audio
formats
Power Supply
Dimensions (mm)
Weight (g)
Chassis Material
2 x Analogue Audio (L/R stereo)
LPCM 7.1, 5.1 or 2 channels and Bitstream (Dolby
TrueHD, Dolby Digital Plus and DTS-HD Master
Audio)
2 x Analogue Audio (L/R stereo)
PCM2/5.1/7.1, Dolby 5.1, DTS 5.1, DD+,
D-TrueHD, DTS-HD
1 x HDMI
1 x Optical
Dolby 5.1/2 and LPCM 2 channels
0.5W
45 (W) x 45 (D) x 25 (H)
140
Plastic
Silk Skin Colour
Black
Operating Temperature
0 to 40 degrees C
Page 7
A
Acronyms
Acronym
Complete Term
6
www.cypeurope.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising