Clipsal C-Bus 8 Channel 1A Dimmer data sheet (112KB pdf).

Clipsal C-Bus 8 Channel 1A Dimmer data sheet (112KB pdf).
C-Bus® 8 Channel
Dimmer, DIN Rail Series
R
L5508D1A Series
The L5508D1A DIN Rail Series Dimmers are C-Bus® output
units suitable for dimming incandescent and low voltage
lighting. For ease of installation the units are DIN rail mounted
measuring 12M wide.
All units in the series incorporate the C-Bus® ‘Learn Mode’
feature. Learn mode allows the units to be programmed
without the need for a PC connected to the system.
Alternatively, t h e u n i t s c a n b e p r o g r a m m e d v i a
a PC using the installation software.
The dimmers feature eight leading edge phase controlled
dimming channels. Each channel has a load rating of 1
Amp, capable of controlling incandescent lighting and low
voltage lighting (utilizing iron-core transformers and electronic
transformers compatible with leading edge dimmers).
C-Bus® connections are conveniently achieved at the unit
through the use of RJ45 connectors, allowing similar units to
be quickly looped together.
During normal operation the units consume no current from
the C-Bus® network.
Two variants of the product are available. One incorporates
a 200mA C-Bus® power supply used to source current
to the C-Bus® network. The other is an economical model
with the same features and performance, but does not include
the 200mA power supply.
This series of units are capable of generating a C-Bus® clock
signal and providing a C-Bus® network burden. Both the clock
signal and the burden are selectable through the C-Bus®
Installation software.
Local toggle buttons have been included to allow individual
channels to be toggled at each unit as well as via
C-Bus ® commands. Remote ON and OFF facilities are
available, permitting all channels to be turned on ON
and OFF without C-Bus® Network communication.
clipsal.com/cis
L5508D1A Series C-Bus® Dimmer Modules
Product of Clipsal Australia Pty. Ltd.
A member of the Schneider Electric Group.
•
Provides eight leading edge phase controlled dimming
channels in a 12M wide DIN rail enclosure
•
Load rating of 8 channels x 1 Amp
•
Capable of controlling incandescent lighting and low
volt-age lighting utilizing iron-core transformers and
electronic transformers compatible with leading
edge dimmers
Head Office
12 Park Terrace, Bowden
South Australia 5007
PO Box 103 Hindmarsh
South Australia 5007
Telephone
•
A special algorithm ensures that lights do not flicker
due to signal injections on the mains
•
Each channel incorporates thermal overload and
overcurrent protection
+61 8 8345 9500
Facsimile
+61 8 8346 0845
Internet
E-Mail
www.clipsal.com/cis
cis@clipsal.com.au
CIS Technical Support Hotline:
1300 722 247
Customer Service Enquiries:
1300 2025 25
National Customer Service Facsimile:
•
Incorporates a linear brightness control, which ensures
the change in brightness is uniform throughout the
control range
Incorporates a Soft Turn ON and Soft Turn OFF
feature, providing a soft change in brightness
•
Units available both with and without an inbuilt 200mA
C-Bus® power supply
•
Up to 100 units without power supply or 10 units with power
supply are permitted on any one single C-Bus® network
(255 networks available in a C-Bus® installation)
•
Configured via either the C-Bus® Installation Software
or via the Learn Enabled Features
•
Local ON/OFF toggle buttons allow individual channels
to be manually overridden at each unit
•
•
Remote ON and OFF facility permits all
channels to be turned ON or OFF without C-Bus®
network communication
Incorporates C-Bus® Network Status, Mains Power
Status and Load Status indicators
International Enquiries
International Sales and Marketing
Telephone
Facsimile
E-Mail
+61 8 8269 0587
+61 8 8340 7350
export@clipsal.com.au
New Zealand
Clipsal Industries (NZ) Ltd
Telephone +64 9 576 3403
Malaysia
Clipsal Integrated Systems (M) Sdn Bhd
Telephone +60 3 7665 3555
Singapore
Clipsal Integrated Systems Pte Ltd
Telephone +65 6415 3232/3233
China
Clipsal China Limited
Telephone +86 755 8237 5959
Greece
Schneider Electric AE
Telephone +30 69 4646 3200
Hong Kong
Clipsal Integrated Systems (HK) Limited
Telephone +852 2487 0261
India
Schneider Electric India Pvt Ltd
Telephone +91 11 5159 0000
Indonesia
PT Clipsal Graha Nusa
Telephone +62 21 630 6430
Korea
Clipsal Korea Co. Ltd
Telephone +82 549 5550
Pakistan
Clipsal Pakistan (Pvt) Ltd
Telephone +92 21 506 7278
•
Capable of generating a C-Bus clock signal if enabled
Philippines
Clipsal Phillipines Inc.
Telephone +632 683 0275-78
•
A network burden is incorporated and is software selectable
South Africa
Clipsal South Africa (Pty) Ltd
Telephone +27 11 314 5200
•
Designed to meet Australian and European standards for
EMC Compliance and Safety
•
®
Capable of being programmed via the installation software
without the need for a mains connection
Taiwan
Clipsal (Taiwan) Co Ltd
Telephone +886 2 2558 3456
Thailand
Clipsal Thailand Ltd
Telephone +66 2 952 5338-42
United Arab Emirates
Clipsal Middle East
Telephone +971 6 5570 777
•
Draws 18mA when being programmed and no mains
connection is made
United Kingdom
Clipsal Integrated Systems
C/o Schneider Electric
Telephone +44 870 608 8 608
•
An inbuilt non-volatile memory retains programmed
information relating to the current operating status of
the unit in the event of a power failure
Vietnam
Clipsal - VTEC
Telephone +848 856 3002
•
Communication with other C-Bus® devices and the
supply voltage is obtained via a single C-Bus® twisted
pair cable
•
•
Electrical isolation between the safe extra low voltage
C-Bus® side and the mains voltage output side is provided
to main-tain safety requirements
Dimensions: H = 85mm, W = 215mm, D = 65mm.
Patented
Clipsal Australia Pty Ltd reserves the right to change specifications,
modify designs and discontinue items without incurring obligation and
whilst every effort is made to ensure that descriptions, specifications and
other information in this catalogue are correct, no warranty is given in
respect thereof and the company shall not be liable for any error therein.
© Clipsal Australia Pty Ltd.
The identified trademarks and copyrights are the property
of Clipsal Australia Pty Ltd unless otherwise noted.
CLIPCOM 13731 Aug 2007
IS3-005
•
1300 2025 56
O/N 11827
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising