Programmble AC Power Source Ihr Spezialist für Mess- und Prüfgeräte Key Features:

Programmble AC Power Source Ihr Spezialist für Mess- und Prüfgeräte Key Features:
Ihr Spezialist für
Mess- und Prüfgeräte
Programmble AC Power Source
Key Features:
■ Power Rating :
61511/61611 : 12KVA
61512/61612 : 18KVA
■ Voltage Range: 0-150V/0-300V/Auto
■ Frequency: DC, 15Hz-1500Hz
■ Single-Phase or Three-Phase Output
Selectable
■ Programmable Slew Rate Setting for
Changing Voltage and Frequency
■ Programmable Voltage and Current Limit
■ High Output Current Crest Factor, Ideal for
Inrush Current Testing
■ Turn on, Turn off Phase Angle Control
■ TTL Signal Which Indicates Output Transient
■ LIST, PULSE, STEP Mode Functions
for Testing Power Line Disturbance (PLD)
Simulation
■ Voltage Dips, Short Interruption and Voltage
Variation Simulation
PROgRAMMABLE AC POWER SOURCE
MODEL 61511/61512/61611/61612
The global market for AC power testing
demands for more sophisticated, high performance AC power source that is capable of
simulating a wide range of AC line conditions.
Chroma 61500/61600 series programmable AC
source are the right solution to meet the market
requirements by providing the ability to simulate
various AC line input conditions and measurement of critical characteristic for products under
test. These features make the 61500/61600
series ideal for commercial, power electronics,
avionics, military and regulation test applications from bench-top R/D design verification,
quality assurance to mass production.
Using the state of the art PWM technology, the
models 61511/61512/61611/61612 can deliver
the maximum output voltage up to 300Vac and
output frequency from 15Hz to 1500Hz. The
AC+DC modes extend the applications not
only for providing pure AC voltage, but also DC
component for DC offset testing in laboratory.
The 61511/61512/61611/61612 AC sources
are capable of delivering up to 4 times of peak
current compared to its maximum rated current that makes it ideal for inrush current test.
All models possess the ability to generate pure
sine waveform output with typical distortion less
than 0.3% at 50/60Hz.
RS-232
Chroma 61500/61600 series are able to provide precision measurements such as RMS
voltage, RMS current, true power, power factor,
current crest factor and so on. By applying the
advanced DSP technology, model 61511/61512
can easily simulate power line disturbance
(PLD) by LIST, PULSE and STEP modes.
■ Harmonics, Inter-Harmonics Waveform
Synthesizer
■ Comprehensive Measurement Capability,
Including Current Harmonics
■ Analog Programmable Interfaces
■ Remote Interface: GPIB, RS-232, USB and
Ethernet
■ Capable of Delivering Power Output up to
90KVA by Implementing Master-Slave
Parallel Operation
Chroma 61500/61600 series allow users to
compose different harmonic components to
synthesize various harmonic distorted waveforms. By applying this advance feature, users
can program a sweeping frequency component
incorporate with fundamental voltage for finding
the resonance points of UUT, thus provide user
with in depth analysis result.
To s i m u l a t e t h e n a t u r a l w a v e f o r m , t h e
61500/61600 series provide an external analog
input to amplify the analog signal generated
from arbitrary signal generator. Thus, user can
implement this feature to duplicate the unique
waveform observed in the field.
The user friendly interface allows user quick
access to 61511/61512/61611/61612 AC
source’s functions through large graphic LCD
display front panel with clear indicated keypad.
The GPIB (IEEE488.2), RS-232, USB and
Ethernet interface are available for users to
control the AC source remotely.
Ethernet
USB
GPIB
dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. 07121 / 51 50 50 ▪ Fax 07121 / 51 50 10 ▪ info@datatec.de ▪ www.datatec.de
1. ADVANCED PWM TECHNOLOgY
Chroma 61500/61600 series AC power source are able to provide highest power density by its advanced
high speed PWM mode design. The modularized power stage design offer outstanding performance
and high reliability. The modularized design allows service personnel to identify the trouble spot more
efficiently and minimize the downtime. With no transformer at the output stage, it not only reduces the
output impedance, but also lets 61500/61600 series be able to program DC component for simulating AC
voltage with DC offset condition. This function allows user to simulate the test condition of unbalanced
input current for rectified load.
2. SINgLE-PHASE AND THREE-PHASE OUTPUT
Model 61511/61512/61611/61612 AC sources are capable of delivering single or three-phase output
depending on the user's application. Users can select these output modes easily through front panel
or via remote control. Model 61511/61512/61611/61612 AC
sources are able to provide full power output without derating
even with the output is configured as single phase.
Phase Waveform
Panel
3. SLEW RATE SETTINg FOR VOLTAgE AND FREQUENCY
Model 61511/61512/61611/61612 AC sources let users set the slew rate of
voltage and frequency. It will follow the slew rate to reach the final setting
when the output voltage or frequency is changed. This function can help the
users to verify the operation range of input power. For example, user can
implement this feature to sweep the voltage gradually from 90V to 264V
instead of only checking several points like 90V, 115V, 230V and 264V.
Another application is; in order to reduce the inrush current during motor
startup or power on multiple UUT, the user can decrease the slew rate setting
to achieve the objective.
4. COMPREHENSIVE MEASUREMENTS
Chroma AC power source 61500/61600 series has a built in 16-bit measurement circuit and firmware utilities to measure the true
RMS voltage, current, true power, VA (apparent power), VAR (reactive power), power factor, current crest factor, peak repetitive
current and inrush current. Using the advanced DSP technology, 61500 series can measure THD and up to 40 orders of current
harmonics. It makes 61500 series not only a sophisticated power source but also a powerful analyzer.
5. POWER LINE DISTURBANCE SIMULATION (61500 SERIES)
In addition to the steady output voltage and frequency programming, Chroma AC power source 61500 series provides powerful
functions to simulate all kinds of power line disturbance conditions. The STEP and PULSE modes offer an easy and convenient
method to execute a single step or continuous output changes. The changes may be triggered by an internal or external event. With
this capability, it's easy to simulate power line disturbances such as cycle dropout, transient spike, brown out and etc.
The LIST Mode extends this function for more complex waveform generator needs, up to 100 sequences with different start-end
conditions, that can perform almost any waveform by AC and DC components. In this way, Chroma AC power source 61500 series
is capable of simulating all sorts of voltage dips, interruptions and variation waveforms for IEC 61000-4-11 pre-compliance test and
IEC61000-4-14/IEC61000-4-28 compliance tests. It also allows users to synchronize external events as well as measurement devices
with output changes.
STEP Mode
2
PULSE Mode
LIST Mode
dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. 07121 / 51 50 50 ▪ Fax 07121 / 51 50 10 ▪ info@datatec.de ▪ www.datatec.de
6. DISTORTION WAVEFORM, HARMONICS, INTERHARMONICS SYNTHESIS (61500 SERIES)
Traditional type of AC source only provides output voltage with sine waveform and
this type of AC source is unable to meet and keep up with the latest test requirements
for simulating the input voltage abnormal condition with distortion waveform. The
WAVEFORM function allow user to set square, clipped-sine wave and 30 stored distortion
waveforms. Besides that, IEC 61000-4-13 standard requires not only the harmonics
waveform, but also interharmonics simulation.
Programmable AC Power Source
Model 61500 series allow users to composite integer up to 40 orders of harmonic
components based on 50Hz or 60Hz fundamental. The output will be a periodic
harmonics distortion waveform. It also provides sweeping interhamonics function. This
means the fundamental frequency will incorporate with a frequency sweeping component
between harmonic frequencies. It can help to find the resonance or the weakest points of
UUT. Chroma AC source 61500 series uses advanced DSP technology to synthesize the
harmonic and interharmonics waveforms. Therefore, it is capable of generating a periodic
harmonic and non-periodic harmonic distorted waveform to perform IEC 61000-4-13
compliance test.
7. PROgRAMMABLE OUTPUT IMPEDANCE (61500 SERIES)
Harmonic Waveform
Interharmonics Waveform
Chroma AC source 61500 series allow users to program output impedance. A current
feedback control circuit makes the output voltage changed with the load. This feature
is suitable for IEC 61000-3-3 Flicker tests or other test condition with particular output
impedance requirement. It provides users a convenient and cost effective way to
implement the reference impedance.
8. AC SOURCE (MASTER-SLAVE) PARALLEL OPERATION
The 61511/61512/61611/61612 AC source models provide the (Master-Slave) parallel operation function, which enable users to extend the AC
source power output ability by connecting AC sources in parallel. The maximum allowable number of AC source implemented for the parallel
operation is 5 units. Therefore, users can achieve a maximum power output up to 90KVA by combining 5 units of assorted AC source of 18KVA
in (Master-Slave) parallel operation mode. The user could also use A615103 Power Stage as an alternative cost effective solution for the
parallel operation, by implementing it as slave unit. Please refer to the following figures for AC source models 61511/61512/61611/61612 setup
for parallel operation configuration.
Master Mode
Slave Mode
Combine two units of Model 61512 for obtaining
36KVA power output or combine AC source models
61512 + 61511 for obtaining 30KVA power output
Master Mode
Slave Mode
Slave Mode
Combine AC source Model 61512 with two units of A615103
(18KVA) for obtaining 54KVA power output
All specifications are subject to change without notice.
Please visit our website for the most up to date specifications.
3
dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. 07121 / 51 50 50 ▪ Fax 07121 / 51 50 10 ▪ info@datatec.de ▪ www.datatec.de
To save the hassle with arranging the input and output wiring of multiple AC sources
connection in parallel operation. Users can select and Implement the Chroma input/output
terminal fixture (A615104/A615105) designed specifically to solve the wiring issue.
A615104: Input/Output terminal fixture for connecting 2 parallel AC source units.
9. THE 61500/61600 SERIES SOFTPANEL*
Chroma Softpanel is a graphical user interface which provides extraordinary capability and convenience to user for delivering control to the
unit. The 61500/61600 series Softpanel is designed specifically for offering users to control the AC source by applying user friendly interface
configured in a graphical, instrument like settings. The self explanatory graphical interface makes the enabling of extensive functions of AC
source with just few clicks of button. Users are able to perform online and offline waveform editing with the implementation of Softpanel. The
Softpanel is also equipped with data recording function as multiple measurement data can be recorded simultaneously. One of the most
powerful features for Softpanel is the availability of test environment configured specifically for conducting IEC regulation test, such as IEC
61000-4-11, IEC61000-4-13, IEC61000-4-14 and IEC61000-4-28.
Main Operation Menu
Transient Voltage Programming
Distorted Waveform Editor
Voltage DIP,
Short Interruption,
Variation Regulation Test
Voltage Harmonic & Interharmonic Test
Voltage Fluctuation Test
Frequency Variation Test
Interharmonic Test
Recording Function
* Softpanel support functions are actually depending on the AC Source model being implemented. For instance, Softpanel will not
provide support for LIST mode function if 61600 series AC Source is implemented.
4
dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. 07121 / 51 50 50 ▪ Fax 07121 / 51 50 10 ▪ info@datatec.de ▪ www.datatec.de
PANEL DESCRIPTION
FRONT PANEL OVERVIEW
1
5
2
6
3
4
7
8
REAR PANEL OVERVIEW
9
10
11
12
13
14
15
16
18
19
20
21
17
22
1. LCD Display :
6.5 inches graphic LCD display for settings and
measurements read back
2. Rotary Knob
Use to adjust the voltage, frequency and parameters
setting
3. Function key
Hot keys for quick parameter setting
4. Numeric key
For data setting
5. Power Switch
6. Soft Keys
The soft-keys adjacent to the command block display on
the LCD that provides users a menu driven interface to
control the AC source operation
7. Cursor Key
For cursor movement
8. Remote Control Port
For optional remote controller
9. Master/Slave Port
For Master-Slave parallel operation
10. External V reference
External analog signal for voltage control
11. TTL I/O
Signals for system integration
12. Remote Control Port
For optional remote controller
13. System Bus
14. Ethernet Interface
15. USB Interface
16. RS-232 Interface
17. gPIB Interface
18. Input Power Selection Switch
Δ or Y 3-phase connection selection
19. Remote Sense
Use to compensate the line drop between
AC source and testing point
20. Input Terminal
21. Output Terminal
22. A615101
AC Source Remote Controller
A615101
ORDERING INFORMATION
61511: Programmable AC Source 0~300V, 15~1.5KHz/12KVA, 1ø/3ø
61512: Programmable AC Source 0~300V, 15~1.5KHz/18KVA, 1ø/3ø
61611: Programmable AC Source 0~300V, 15~1.5KHz/12KVA, 1ø/3ø
61612: Programmable AC Source 0~300V, 15~1.5KHz/18KVA, 1ø/3ø
A615007: Softpanel for 61500/61600 Series
*A615101: AC Source Remote Controller for 61511/61512/61611/61612
A615103: Parallable power stage unit 18KVA, 1ø/3ø
A615104: Input/Output terminals for parallel connecting (2 units)
A615105: Input/Output terminals for parallel connecting (3 units)
Option for 277V LN/480V LL(5 Wires) AC input voltage are available with 61511/61512/61611/61612/A615103 models. Please contact with local sales
representative for ordering information.
* Call for availability
5
dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. 07121 / 51 50 50 ▪ Fax 07121 / 51 50 10 ▪ info@datatec.de ▪ www.datatec.de
Ihr Spezialist für
Mess- und Prüfgeräte
Model
61511
61611
61512
61612
61511+A615103 61611+A615103 61512+A615103 61612+A615103
Output Phase
1 or 3 selectable
Output Rating-AC
Power
12kVA
18kVA
30kVA
36kVA
Each phase
4kVA
6 kVA
10kVA
12kVA
Voltage
Range
0~150V/0~300V
Accuracy
0.2%+0.2%F.S.
Resolution
0.1 V
Distortion *1
0.3% @50/60Hz , 1%@15~1kHz,1.5%@>1kHz
Line regulation
0.1%
Load regulation *2
0.2%
Temp. coefficient
0.02% per degree from 25℃
Max Current (1-phase mode)
RMS
96A / 48A
144A / 72A
240A / 120A
288A / 144A
Peak (CF=4)
384A / 192A
576A / 288A
960A / 480A
1152A / 576A
Max Current (each phase in 3-phase mode)
RMS
32A / 16A
48A / 24A
80A / 40A
96A / 48A
Peak (CF=4)
128A / 64A
192A / 96A
320A / 160A
384A / 192A
Frequency
Range
DC, 15-1.5kHz
Accuracy
0.15%
Phase
Range
0 ~ 360°
Resolution
0.3°
Accuracy
<0.8°@50/60Hz
DC Output (1-phase mode)
Power
6kW
9kW
15kW
18kW
Voltage
212V / 424V
212V / 424V
212V / 424V
212V / 424V
Current
48A / 24A
72A / 36A
120A / 60A
144A / 72A
DC Output (3-phase mode)
Power
2kW
3kW
5kW
6kW
Voltage
212V / 424V
212V / 424V
212V / 424V
212V / 424V
Current
16A / 8A
24A / 12A
40A / 20A
48A / 24A
Input AC Power (each phase)
AC type
3-phase, Delta or Y connecting
Voltage range *3
190-250V (Delta: L-L, Y: L-N)
Frequency range
47-63 Hz
Max. current
Delta: 80A Y: 70A
Delta: 120A Y: 90A
Delta: 200A Y: 160A
Delta: 240A Y: 180A
Measurement
Voltage
Range
150V / 300V
Accuracy
0.2%+0.2%F.S.
Resolution
0.1 V
Current
Range
128/32/8 A peak
192/48/12 A peak
320/80/20 A peak
384/96/24 A peak
Accuracy (rms)
0.4%+0.3%F.S.
Accuracy (peak)
0.4%+0.6%F.S.
Resolution
0.1 A
Power
Accuracy
0.4%+0.4% F.S
Resolution
0.1 W
Efficiency *4
0.75 (Typical)
Protect
UVP, OCP, OPP, OTP, FAN
Interface
GPIB, RS-232, USB, Ethernet (standard)
Temperature
Operation
0℃ ~40℃
Storage
-40℃~85℃
Humidity
30 %~90 %
Safety & EMC
CE
Dimensions (H x W x D)
1163 x 546 x 700 mm / 45.78 x 21.5 x 27.56 inch *5
1163 x 546 x 700 mm / 45.78 x 21.5 x 27.56 inch x 2 units *5
Weight
229.4 kg / 505.29 lbs
242.4 kg / 533.92 lbs
480 kg / 1057.27 lbs
495 kg / 1090.31 lbs
Note*1 : Maximum distortion is tested on output 125VAC (150V RANGE) and 250VAC (300V RANGE) with maximum current to linear load.
Note*2 : Load regulation is tested with sine wave and remote sense.
Note*3 : Models with 277VLN/480VLL(5 Wires) AC input voltage are available upon request.
Note*4 : Efficiency is tested on input voltage 230V.
Note*5 : Dimension (H X W X D) with wheelsets : 1246x546x700 mm / 49.05x21.5x27.56 inch
Others
Waveform Synthesis
Harmonic measurement
Programmable impedance
61511
61512
61511 + A615103
40 orders @ 50/60Hz
Voltage / Current 40 orders @ 50/60Hz
0Ω+200µH ~ 1Ω+1mH
All specifications are subject to change without notice. Please visit our website for the most up to date specifications.
Developed and Manufactured by :
6
61512 + A615103
Distributed by:
CHROMA ATE INC.
dataTec ▪ Ferdinand-Lassalle-Str.
52 JAPAN
▪ 72770 Reutlingen ▪ Tel.
07121 / 51 50 50 ▪ Fax
07121 / 51 50 10 ▪ info@datatec.de ▪ www.datatec.de
致茂電子股份有限公司
CHINA
EUROPE
U.S.A.
HEADQUARTERS
No. 66, Hwa-Ya 1st Rd.,
Hwa-Ya Technology Park,
CHROMA ELECTRONICS
(SHENZHEN) CO., LTD.
8F, No.4, Nanyou Tian An
CHROMA JAPAN CORP.
472, Kohoku-ku Yokohama
city Ntsupa 223-0057 Japan
CHROMA SYSTEMS
SOLUTIONS, INC.
25612 Commercentre Drive,
CHROMA ATE EUROPE B.V.
Morsestraat 32, 6716 AH Ede,
The Netherlands
Änderungen und Irrtümer vorbehalten. dataTec 15-09-2014 | Update CHROMA ATE INC.: 61512-E-201102-E-PDF
SPECIFICATION
Ihr Spezialist für
Mess- und Prüfgeräte
STARKE MARKEN. HÖCHSTE PRODUKTVIELFALT. BESTE QUALITÄT.
Schnell und bequem online bestellen – bei dataTec ist das möglich. Bei uns finden Sie die perfekte Lösung für ihre vielfältigen Anforderungen.
Wir bieten eine unschlagbare Auswahl an Mess- und Prüfgeräten namhafter Hersteller. Diese reicht von
Arbiträr-Funktionsgeneratoren über Logikanalysatoren bis hin zu Stromversorgungen und Stromzangen
oder Oszilloskopen bis 90 GHz Bandbreite. Hohe Lagerkapazität und kurze Wege sorgen dafür, dass
die gewünschte Ware ganz schnell bei Ihnen ist. Bundesweit meist innerhalb eines Tages.
Mehr Klicks, mehr Vorteile:
mehrere tausend Mess- und Prüfgeräte
tagesaktuelle Preise und Promotions
Warenkorbrabatt bei Onlinebestellung
Angebotsanfrage oder Bestellung unter:
versandkostenfrei*
Datenblatt-Download
u. v. m.
B2LIB
NEON
SHOP
* ab € 80,- Auftragswert
7
dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. 07121 / 51 50 50 ▪ Fax 07121 / 51 50 10 ▪ info@datatec.de ▪ www.datatec.de
Ihr Spezialist für
Mess- und Prüfgeräte
KOMPETENTE BERATUNG VOR UND NACH DEM KAUF.
Haben Sie eine technische Frage zu den Geräten, zum Handling und Bedienung eines Gerätes, zur
passenden Software und / oder bei der Auswahl des richtigen Equipments für Ihre Messaufgabe?
Bei uns kümmern sich echte Diplom-Ingenieure, Elektronik- und Elektrotechniker mit langjähriger
Praxiserfahrung und hoher Kompetenz um Ihr Anliegen. Kostenlos berät Sie unser praxiserfahrener
und herstellerzertifizierter Außendienst direkt bei Ihnen vor Ort und / oder führt Ihnen live das gewünschte Mess- und Prüfgerät vor.
Die technischen Experten für:
Oszilloskope
Spektrum- / Netzwerkanalysatoren
Netzgeräte / Stromversorgungen
Thermografie / Temperatur
Prüfgeräte VDE / Netzanalyse
u. v. m.
Technische Frage oder Termin vereinbaren unter:
ICHE
BINDL
UNVER
UNG
T
A
R
E
B
T
R
VOR O
dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. 07121 / 51 50 50 ▪ Fax 07121 / 51 50 10 ▪ info@datatec.de ▪ www.datatec.de
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising