P5KL (partial discontinued)

P5KL (partial discontinued)
AXK(5/6)L
Discontinued
Discontinued as
as of
of September
September 30,
30, 2013
2013
For board-to-board
Narrow pitch connectors
(0.5mm pitch)
m
m
3m
8m
3.
5.
Socket
Header
Products are discontinued.
P5KL Series
FEATURES
APPLICATIONS
1. Low profile mated height of 1.2 mm
and 0.5 mm pitch contributes to
device miniaturization.
2. Strong resistance to adverse
environments! Utilizes
construction
for high contact reliability.
3. Simple lock structure provides
tactile feedback to ensure excellent
mating/unmating operation feel.
Digital devices, such as digital still
cameras and digital video cameras.
Simple lock
mechanism
4. Effective mating length 0.3 mm
0.3mm
ORDERING INFORMATION
AXK
3
7
G
5L: Narrow Pitch Connector P5KL (0.5 mm pitch) Socket
6L: Narrow Pitch Connector P5KL (0.5 mm pitch) Header
Number of pins (2 digits)
Mated height
<Socket>
3: For mated height 1.2 mm
<Header>
3: For mated height 1.2 mm
Functions
3: With positioning bosses
4: Without positioning bosses
Surface treatment (Contact portion / Terminal portion)
7: Ni plating on base, Au plating on surface (for Ni barrier available)
Packing
G: 3,000 pieces embossed tape and plastic reel x 2 (for Ni barrier available)
ds_65307_en_p5kl: 311012J
1
AXK(5/6)L
Discontinued as of September 30, 2013
PRODUCT TYPES
Part No.
Mated height
1.2 mm
Packing quantity
No. of pins
Socket
Header
10
12
20
24
30
34
40
46
50
60
AXK5L10347G
AXK5L12347G
AXK5L20347G
AXK5L24347G
AXK5L30347G
AXK5L34347G
AXK5L40347G
AXK5L46347G
AXK5L50347G
AXK5L60347G
AXK6L10347G
AXK6L12347G
AXK6L20347G
AXK6L24347G
AXK6L30347G
AXK6L34347G
AXK6L40347G
AXK6L46347G
AXK6L50347G
AXK6L60347G
Inner carton
(1-reel)
Outer carton
3,000 pieces
6,000 pieces
Notes: 1. Regarding ordering units: During production, Please make orders in 1-reel units. Samples for mounting confirmation: Please consult us. Samples: Small lot orders
are possible. Please consult us.
2. The standard type comes without positioning bosses. Connectors with positioning bosses are available for on-demand production.
For this type of connector, 9th digit of the part no. changes from 4 to 3. e.g. 10 pin contacts for sockets: AXK5L10337G
SPECIFICATIONS
1. Characteristics
Electrical
characteristics
Item
Rated current
Rated voltage
Breakdown voltage
Specifications
0.5A/pin contact (Max. 10 A at total pin contacts)
60V AC/DC
150V AC for 1 minute
Detection current: 1mA
Min. 1,000M (initial)
Using 500V DC megger
Insulation resistance
Contact resistance
Mechanical
characteristics
Max. 90m
Composite insertion force
Composite removal force
Holding force of terminal
securing section
Ambient temperature
Soldering heat resistance
Storage temperature
Conditions
Based on the contact resistance measurement method
specified by JIS C 5402.
Max. 0.981N {100gf}/pin contacts  pin contacts (initial)
Min. 0.0588N {6gf}/pin contacts  pin contacts
Min. 0.981N {100gf}/pin contact
–55C to +85C
Max. peak temperature of 260C (on the surface of the
PC board around the connector terminals)
300C within 5 seconds
350C within 3 seconds
–55C to +85C (product only)
–40C to +50C (emboss packing)
Measuring the maximum force.
As the contact is axially pull out.
No freezing at low temperatures
Infrared reflow soldering
Soldering iron
No freezing at low temperatures. No dew condensation.
Conformed to MIL-STD-202F, method 107G
Environmental
characteristics
Lifetime
characteristics
Unit weight
Thermal shock resistance
(header and socket mated)
5 cycles,
insulation resistance min. 100M,
contact resistance max. 90m
Humidity resistance
(header and socket mated)
Saltwater spray resistance
(header and socket mated)
H2S resistance
(header and socket mated)
120 hours, insulation resistance min. 100M,
contact resistance max. 90m
24 hours, insulation resistance min. 100M,
contact resistance max. 90m
Insertion and removal life
50 times
48 hours, contact resistance max. 90m
Order Temperature (°C)
1
–55 −30
2
3
85 +30
4
–55 −30
Time (minutes)
30
Max. 5
30
Max. 5
Bath temperature 402C,
humidity 90 to 95% R.H.
Bath temperature 352C,
saltwarter concentration 51%
Bath temperature 402C, gas concentration 31 ppm,
humidity 75 to 80% R.H.
Repeated insertion and removal speed of
max. 200 times/hours
20 pin contacts; Socket: 0.05g; Header: 0.02g
2. Material and surface treatment
2
Part name
Molded portion
Material
Heat-resistant resin (UL94V-0)
Contact/Post
Copper alloy
Surface treatment
—
Contact portion: Ni plating on base, Au plating on surface
Terminal portion: Ni plating on base, Au plating on surface (Except for thick of terminal)
The section close to the soldering portion has a nickel barrier.
(The nickel base is exposed.)
ds_65307_en_p5kl: 311012J
AXK(5/6)L
Discontinued as of September 30, 2013
DIMENSIONS
Interested in CAD data? You can obtain CAD data for all products with a CAD Data
mark from your local Panasonic Electric Works representative.
(Unit: mm)
• Socket (Mated height: 1.2mm)
A
(Suction face) 1.60
B±0.1
0.20±0.03
0.10
(0.80)
0.50±0.05
Terminal
coplanarity
1.20
5.80
4.20
4.80
Dimension table (mm)
1.15
(0.80)
0.10±0.03
No. of contacts
10
12
20
24
30
34
40
46
50
60
A
5.50
6.00
8.00
9.00
10.50
11.50
13.00
14.50
15.50
18.00
B
2.00
2.50
4.50
5.50
7.00
8.00
9.50
11.00
12.00
14.50
General tolerance: 0.2
0.90
0.10±0.03
Dimension table (mm)
3.30
2.00
2.50
0.20±0.03
Terminal coplanarity
0.10
(0.65)
0.50±0.05
0.95
(0.65)
A
B±0.1
(Suction face) 1.20
• Header (Mated height: 1.2mm)
No. of contacts
10
12
20
24
30
34
40
46
50
60
A
3.90
4.40
6.40
7.40
8.90
9.90
11.40
12.90
13.90
16.40
B
2.00
2.50
4.50
5.50
7.00
8.00
9.50
11.00
12.00
14.50
General tolerance: 0.2
• Socket and header are mated
1.20±0.15
Header
Socket
ds_65307_en_p5kl: 311012J
3
AXK(5/6)L
Discontinued as of September 30, 2013
EMBOSSED TAPE DIMENSIONS (unit: mm, Common for respective contact type, socket and header)
• Tape dimensions (Conforming to JIS C 0806-1990.
However, some tapes have mounting hole pitches that do
not comply with the standard.)
Tape I
Tape II
Taping reel
D±1
A±0.3
A±0.3
B
1.75
C
Pull out direction
4
2
8.0
Top cover tape
1.75
380 dia.
C
Pull out direction
• Plastic reel dimensions (Conforming to EIAJ ET-7200B)
4
2
Embossed carrier tape
Embossed mounting-hole
8.0
1.5+0.1
0 dia.
1.5+0.1
0 dia.
Dimension table (mm)
Suffix: G (1 reel, 3,000 pieces embossed tape: Plastic reel package)
Mated height
No. of pins
Type of taping
A
B
C
D
Quantity per reel
Socket and header are common:
1.2mm
10 to 18
20 to 50
60
Tape I
Tape I
Tape II
16.0
24.0
32.0
—
—
28.4
7.5
11.5
14.2
17.4
25.4
33.4
3,000 pcs.
3,000 pcs.
3,000 pcs.
Connector orientation with respect to direction of progress of embossed tape
Type
Common for P5KL
Direction of
tape progress
Socket
Header
Note: There is no indication on this product regarding top-bottom or left-right orientation.
4
ds_65307_en_p5kl: 311012J
AXK(5/6)L
Discontinued as of September 30, 2013
NOTES
• Socket
• Header
Recommended PC board pattern (TOP VIEW)
0.50±0.05
0.25±0.03
Recommended PC board pattern (TOP VIEW)
0.40±0.05
0.125±0.03
2.40±0.05
4.30±0.05
C
6.80±0.05
0.50±0.05
0.25±0.03
4.00±0.05
3.20±0.05
2.20±0.05
1. As shown below, excess force
during insertion may result in damage
to the connector or removal of the
solder. Also, to prevent connector
damage plese confirm the correct
position before mating connectors.
B±0.05
2. Keep the PC board warp no more
than 0.03 mm in relation to the overall
length of the connector.
0.40±0.05
0.125±0.03
B±0.05
: Insulation area
Recommended metal mask pattern
Metal mask thickness: 150 m
(Terminal portion opening area ratio: 57%)
Recommended metal mask pattern
Metal mask thickness: 150 m
(Terminal portion opening area ratio: 56%)
0.50±0.01
0.23±0.01
0.50±0.01
0.23±0.01
0.35±0.01
0.115±0.01
Recommended metal mask pattern
Metal mask thickness: 120 m
(Terminal portion opening area ratio: 70%)
Recommended metal mask pattern
Metal mask thickness: 120 m
(Terminal portion opening area ratio: 70%)
0.23±0.01
4.10±0.01
(0.72)
0.115±0.01
2.66±0.01
(1.07)
0.115±0.01
(0.72)
6.60±0.01
0.50±0.01
0.23±0.01
4.46±0.01
0.50±0.01
0.35±0.01
0.35±0.01
(0.58)
(0.58)
2.94±0.01
4.10±0.01
0.35±0.01
0.115±0.01
(1.07)
3. Recommended PC board and metal
mask patterns
Connectors are mounted with high pitch
density, intervals of 0.35 mm, 0.4 mm or
0.5 mm.
In order to reduce solder bridges and
other issues make sure the proper levels
of solder is used.
The figures to the right are recommended
metal mask patterns. Please use them as
a reference.
(0.86)
4.88±0.01
6.60±0.01
Max. 0.03mm
(0.86)
Max. 0.03mm
Notes: 1. See the dimension table on page 3 for more
information on the B dimension of the
socket and header.
2. The socket C dimension is the B dimension
in the dimensions table with 0.8 added.
For Cautions for Use, see Connector Technical Information. For other details,
please verify with the product specification sheets.
ds_65307_en_p5kl: 311012J
5
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising