DS-30230_manual_english_20110614
USB 2.0 / FireWire 400 Interface
PCIexpress Combo-Add-On card
User Manual
(DS-30230)
All brand names and trademarks are properties of their
Respective owners.
Features and Benefits

Compliant with PCI Express Base Specification 1.0a

Combo design adds three USB 2.0 (480Mbps) and two FireWire
(400Mbps) ports into your system

Hot-swapping feature allows you to connect/disconnect devices
without first turning system off
USB 2.0 interface:

Compliant with USB specification rev. 2.0

Supports high-speed (480Mbps), full-speed (12Mbps), and
low-speed(1.5Mbps) data transfer modes for simultaneous
operation of multiple USB 2.0/1.1 devices

Works with a various type of USB devices including hubs,
removable
drives,
digital
cameras,
scanner,
CD-RWs,
DVD-ROMs, PC video cameras, printers, and more…
FireWire (1394a) interface:

IEEE 1394-1995, 1394a-2000 and OHCI 1.1 standards

Supports serial bus data transfer rates of 100, 200 and 400Mbps

Works with various types of 1394 devices including DV
camcorder/cameras, hard disk drives, CD-RWs, DVD-ROMs,
removable drives, scanners, and other audio/video devices
Page 2
Bus Interface

PCI Express x1
Connectors

3 x external type A USB ports

2 x external 6-pin FireWire 1394a ports
System Requirements

Windows® 2000 SP4/XP SP1/Server 2003/Vista/7

PCI Express-enabled system with an available PCI Express slot
Optional Accessories

Ulead Video Studio CD

IEEE 1394a Cable
Page 3
Board Layout
Hardware Installation
1.
Turn Off the power to your computer.
2.
Unplug the power cord and remove your computer’s cover.
3.
Remove the slot bracket from an available PCIe slot.
4.
To install the card, carefully align the card’s bus connector with
Page 4
the selected PCIe slot on the motherboard. Push the board down
firmly.
5.
Connect the system power source to the board’s power
connector.
6.
Replace the slot bracket’s holding screw to secure the card.
7.
Replace the computer cover and reconnect the power cord.
Driver Installation
For Windows® 2000/XP/7
Windows® 2000/XP will automatically detect and install the correct
driver for the PCIe 1394a + USB 2.0 Card..
However, please ensure you have the latest Service Pack Installed.
For Windows® 2000

Windows® 2000 Service Pack 4 or later
For Windows® XP

Windows® XP Service Pack 1 or later
Page 5
For Windows® Server 2003/Vista
Windows® Server 2003/Vista has built-in driver support for this
controller. Just install the board and Windows will automatically detect
and install the correct drivers for it. No additional driver is necessary.
To Verify Driver Installation
1.
Right click My Computer, click Manage, and then click Device
Manager.
2.
Double click IEEE 1394 Bus host controllers option and a
NEC OHCI Compliant IEEE 1394 Host Controller should be
displayed.
3.
Double click Universal Serial Bus controllers and the
following options should be displayed, in addition to other that
may come with your system.
- NEC PCI to USB Open Host Controller
- Standard Enhanced PCI to USB Host Controller
- USB Root Hub (USB 2.0 Root Hub in Windows® 2000)
- USB Root Hub
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising