BRIA

BRIA
A2
-
A1
+
DC RIPPLE
RELAY
INPUT
0.8
2.0
2.4
75,0 mm
1.6
3.2
%
RANGE
x 0.5
x 1.0
t
O
N
DC RIPPLE RELAY
Type: BRIA
x 2.0
t
O
F
F
O
N
12 11 14 22 21 24
35,0 mm
100,0 mm
FEATURES
•
One unit for all voltages from 18 to 340Vdc
•
4 voltage sub-ranges for high accuracy
•
High sensitivity. Adjustable from 0.4 to 6.4%
•
3 ripple sensitivity ranges for an easy adjustment
•
Excellent accuracy and equal sensitivity
for ripple frequencies from 30 to 3000Hz.
•
No separate supply power needed
•
Time delay - ON and OFF - individually adjustable
•
Compact. 35mm box with 2 C/O contacts
FUNCTION DIAGRAM
Ripple
Description:
The ripple relay BRIA is developed to supervise thyristor rectifiers for
faulty thyristors. The relay is extremely sensitive, stable and detects
with high accuracy ripple levels exceeding the set sensitivity in the
frequency range from 30 to 3000 Hz.. Supply power is taken from the
input, and by using a wide range switchmode supply, the same relay can
be used in systems with voltages from 18 to 340Vdc. In order to have
the same precision for all system voltages, the range 18 to 340Vdc is
divided into 4 overlapping subranges, selected by two DIP-switches.
By use of another DIP-switch, the sensitivity range can be set from 0.4
to 1.6%, 0.8 to 3.2% or 1.6 to 6.4% of the system voltage.
Operation:
The input voltage is divided into two signals. In order to measure the
ripple in % of the varying system voltage, one part is averaged and
used to set the internal reference voltage. The other signal, the AC
signal related to the ripple, is amplified and conditioned through a
bandpass filter in order to avoid false triggering due to frequencies
outside the measuring range from 30 to 3000 Hz. The rectified mean
value is then compared to a set part of the reference voltage. When
the relay is powered up, and the ripple on the input is below the set
limit, then the internal relay will pull in and the contacts 11-14 and 2124 will close. The indication will be a green LED for the input and a
yellow for the relay. If the ripple content of the input voltage increases
and exceeds the set sensitivity, then the OFF delay starts to elapse,
indicated by the red input LED and a yellow timing LED. The relay
will drop out when the set OFF delay has expired and the yellow relay
LED will extinguish. If the ripple content decreases by 10% of the set
limit, the ON delay starts to elapse, indicated by the green input LED
and a yellow timing LED. The relay will pull in when the set ON delay
has expired and the yellow relay LED will be lit.
Limit
Return
Time
Relay LED
11-14 21-24
11-12 11-22
Input
t OFF
Application:
Supervision of DC Power supplies in general or battery chargers in
UPS systems.
t ON
PROGRAMMABLE FEATURES
LED
Green
Red
ACTUATOR
VOLTAGE SETTING
Time LED
Yellow ON
RA N GE
18 V -
50 V
0,4 - 1,6 %
32 V - 100 V
0,8 - 3,2 %
64 V - 200 V
1,6 - 6,4 %
110 V - 340 V
CONNECTION DIAGRAM
Rail mounting
Socket mounting
11
21
A1 +
A2 -
6
5
7
8
4
9
3
t
2
10
1
ON OFF
12 14 22 24
A1
11
A2
35
Thiim A/S
Transformervej 31
2730 Herlev - Denmark
Tel.: +45 4485 8000
Fax: +45 4485 8005
Web:
www.thiim.com
Webshop: shop.thiim.com
ORDERING INFORMATION
SPECIFICATIONS
INPUT
Voltage Ranges selectable
by dipswitch
EXAMPLE:
DC voltage 0 - 340V, 374VPeak
18 50 V
32 - 100 V
64 - 200 V
110 - 340 V
TYPE
DC voltage monitoring control relay
BRIA
INPUT AND SUPPLY VOLTAGE
18 - 340 Vdc
1834
Ripple Ranges selectable
by dipswitch
0.4
0.8
1.6
ADJUSTMENT
Trimpot and dipswitch adj.
D
Hysteresis
10 % of Ripple sensitivity
HOUSING
Rail mounting
Socket Mounting
A
E
SIZE
35 mm.
3
CODE
Code end
Extended code
C
E
PERFORMANCE PARAMETERS
TIMING
Response time
Time range during run
ELECTRICAL
Temp. dependence
-
1.6 %
3.2 %
6.4 %
Approx. 200 msec.
Separate On and Off delay
0.2 - 10 sec. adjustable
Relay, 2 C/O, AgNi
6 A, 250 VAC, 1500 W
30 million operations
SUPPLY
Power consumption
DC voltage from input
Max. 3 W
Weight
EMC directive 89/336:
Low voltage directive 73/23:
1834
D
A
3
C
Typ. ± 0.02 % / °C
OUTPUT
Contact rating
Mechanical life
GENERAL
Temperature range
Humidity
Dieletric test voltage
BRIA
- 25 °C to + 55 °C ambient
Up to 90 % RH non-condensing
Coil to relay contacts
4000 VAC
Pole to pole
2500 VAC
0.22 kg
International Standards
Emission and
EN50263:2000
Immunity
EN61000-3-2
EN61000-3-3
Electrical Relays
EN60255
36
We reserve the right to make changes for product improvement.
BRIA.INDD - 250808
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising