Roland UM-ONE mk2 USB MIDI接口 Owner's Manual
Roland UM-ONE: Make Music, Anywhere
Roland UM-ONE is a compact and portable audio interface that lets you connect your instruments and microphones to your computer or iPad, making it easy to record and produce music. With its simple controls and high-quality sound, the UM-ONE is perfect for musicians of all levels, from beginners to professionals.
Here are some of the things you can do with the Roland UM-ONE:
- Record your instruments and vocals in high-quality audio
- Produce music using your favorite software
- Connect your iPad to the UM-ONE and use it as a mobile recording studio
- Use the UM-ONE as a MIDI interface to control your synthesizers and other MIDI devices
advertisement
Read Me First
About the UM-ONE mk2’s [COMP/TAB] Switch
The [COMP/TAB] switch needs to be placed at the setting that’s appropriate for the device to which you’re connecting the UM-ONE mk2.
Switch position Connected device
COMP
TAB
For connecting a computer. Refer to “Using the UM-ONE mk2 with a Computer” (p. 1).
In order to use the COMP setting, you must install the driver in your computer.
Using the UM-ONE mk2 with a Computer
If using the UM-ONE mk2 while connected to a computer, set the UM-ONE mk2’s [COMP/TAB] switch to the “COMP” position.
2
1
1.
Set the UM-ONE mk2’s [COMP/TAB] switch to the “COMP” position.
2.
Connect the UM-ONE mk2 to the computer.
MEMO
If you want to connect the UM-ONE mk2 to a computer in which the USB driver has not been installed, disconnect the UM-ONE mk2’s USB cable from the computer, and install the USB driver in the computer as described in the section “Driver Installation” in the UM-ONE mk2 owner’s manual.
UM-ONE mk2
1
Read Me First
Using the UM-ONE mk2 with an iPad
If using the UM-ONE mk2 with an iPad, set the UM-ONE mk2’s [COMP/TAB] switch to the “TAB” position.
Before you continue, please make sure to access the following URL and check the operating requirements and other relevant information.
http://www.roland.com/support/
NOTE
• The first-generation iPad cannot be used.
• The iPad app you’re using must support CoreMIDI.
You’ll need to provide the following items
• iPad (made by the Apple Inc.)
• Apple iPad Camera Connection Kit (Camera Connector; made by the Apple Inc.)
• USB hub (commercially available; a type to which an AC adaptor or other power supply is connected)
• USB cable (commercially available)
1 2
AC adaptor included with the USB hub
4
USB hub that works with a connected power supply
(commercially available)
Apple iPad Camera
Connection Kit
(Camera Connector)
3
1.
Power up your USB hub (connect the AC adaptor to the USB hub).
2.
Connect the USB hub to the iPad using the Camera Connector of the Apple iPad Camera Connection Kit.
3.
Set the UM-ONE mk2’s [COMP/TAB] switch to the “TAB” position.
4.
Connect the UM-ONE mk2 to the USB hub.
MEMO
Operation may be unstable if you use a USB hub of a type that does not have a connected power supply, or if you connect the UM-ONE mk2 directly to the iPad.
Copyright © 2012 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.
Company names and product names appearing in this document are registered trademarks or trademarks of their respective owners.
2
advertisement
Frequently Answers and Questions
What is the purpose of the [COMP/TAB] switch on the Roland UM-ONE mk2?
What is the difference between the COMP and TAB settings on the [COMP/TAB] switch?
How do I connect the UM-ONE mk2 to a computer?
How do I connect the UM-ONE mk2 to an iPad?
What are the requirements for using the UM-ONE mk2 with an iPad?
Related manuals
advertisement