Food Processing Guide

Food Processing Guide
®
Wiring Device-Kellems
Food Processing
Product Solution Guide
for Wiring Devices
HUBBELL® Food Processing Solutions
2
Washdown
Areas
Corrosive
Environments
Extreme
Temperatures
To ensure sanitary
conditions, washdowns
are required in
food processing
environments. Strict cleanliness
and sanitation requirements must
be met to ensure product is safe for
consumer use, but washdowns and
harsh chemicals can damage and
shorten the life of electrical products.
Selecting the proper equipment
is critical in avoiding downtime
while still promoting sanitary
conditions. All electrical equipment,
controls, and components must be
environmentally rated for the
correct application.
In highly corrosive
food processing
environments,
materials must
constantly battle deterioration.
Unprotected electrical
products can deteriorate and
fail, creating safety issues,
unreliable connections,
and the potential for lost
productivity. Corrosion caused
by chemicals, moisture,
and other elements can’t
be eliminated, but the right
products can ensure that
corrosion doesn’t interfere with
reliable power delivery.
Food and beverage
plants often operate
within extreme
temperature ranges
due to processing equipment
like dryers, ovens, and flash
freezers. Harsh hot and cold
zones, along with extreme
temperature fluctuations, can
add stress to the electrical
system. In these environments,
electrical component failure
may occur. Expansion and
contraction caused by
temperature changes can
damage electrical devices.
www.hubbell-wiring.com
For complete listing of products see our full line catalogs.
®
Wiring Device-Kellems
Process
Automation
Personnel
Protection
Harsh
Locations
Improving food
processing
capabilities and
efficiencies can
help lower production costs
while improving overall
productivity. To achieve this, all
electrical, instrumentation and
automation components must
work together efficiently and
effectively within the process
automation. Automating food
and beverage processing
requires equipment flexibility
and the ability to reconfigure
quickly and efficiently.
Not only is food
safety important in
a food processing
environment – so is
the safety of the personnel who
work in these areas. Employees
are subject to the risk of
electrical shock from exposed
wiring and trips and falls from
cables and cords on the floor.
Injury due to working alongside
harsh chemicals and in extreme
temperatures are also a concern.
Commitment to personnel
safety requires the right types of
electrical components to protect
against hazards.
Food processing
plants can be
classified as
hazardous by
the National Electrical Code
because of the way materials
are handled, processed,
and stored. Explosion and
fire are possible due to the
presence of flammable gases,
vapors, and dust. To protect
food processing facilities and
employees, high-performance
solutions are needed to
prevent and contain possible
explosion.
www.hubbell-wiring.com
For complete listing of products see our full line catalogs.
3
HUBBELL® Food Processing Solutions
4
www.hubbell-wiring.com
®
Wiring Device-Kellems
Table Of Contents
Washdown Areas
IEC Pin & Sleeve . . . . . . . . . . . . . 6
Watertight Wiring Devices . . . . . 6-7
Corrosive Environments
Corrosion Resistant Devices . . . . 8
Weatherproof Covers. . . . . . . . . . 8
Extreme Temperatures
Hazardous Location
Occupancy Sensors. . . . . . . . . . . 9
50 Amp Twist-Lock® . . . . . . . . . . 9
Process Automation
Linkosity®. . . . . . . . . . . . . . . . . . 10
MotorQuick® . . . . . . . . . . . . . . . 10
Twist-Lock® Wiring Devices. . . . 11
Panel-Safe® . . . . . . . . . . . . . . . . 11
Personnel Protection
GFCI Receptacles . . . . . . . . . . . 12
Locking Switches. . . . . . . . . . . . 12
Portable GFCI . . . . . . . . . . . . . . 12
Switched Enclosures. . . . . . . . . 13
TrukTrak® and TredTrak®. . . . . . . 13
Cord and Hose Reels. . . . . . . . . 13
Harsh Locations
Mechanical Interlocks. . . . . . . . . 14
Disconnect Switches. . . . . . . . . 14
Explosion Proof Lighting. . . . . . . 15
Harsh Occupancy Sensors . . . . 15
www.hubbell-wiring.com
5
Washdown Areas
Washdown environments can be challenging to clean. Not only do electrical
products need to withstand high-pressure washdowns and harsh chemicals,
but complete runoff is also important. Whether it's Watertight devices,
Watertight Safety-Shroud® Twist-Lock® devices or IEC Pin & Sleeve devices,
Hubbell’s extensive offering of devices meet the challenge.
IEC Watertight and Switch-Rated Pin & Sleeve Devices
• The UV-stabilized, impact and corrosion-resistant PBT housing is designed to withstand harsh
industrial environments
• Advantage™ Series Switch-Rated Pin & Sleeve has superior water ingress protection, UL
witnessed IP69k and UL Type 4X and 12. Device is built to withstand wet and harsh environments
• The sleek and modern design of the ergonomic device is easy to keep clean making it ideal for
hygienic food processing facilities
Water & Dust Ingress
Protection:
IP69k
IP69k Water Test
Extremely Hot (176˚) and High
Pressure Water (1450 psi)
sprayed from various angles.
IP69k Dust Test
Device is placed in a dust
chamber for 8 hours while a
vacuum tries to pull dust into
the sealed device.
UL 50E Type 4X Test
High Flow of Water (65 gallons
of water per minute thru 1”
hose) is directed at all joints of
the enclosure for 5 minutes.
Advantage™ Series
Closure cover is spring-loaded
to the open position, reminding
users that the cover must be
secured to ensure maximum
ingress protection.
Rating Color
Coded by
Voltage
20A
120/240V
20A
3Ø 480V
30A
125/250V
30A
3Ø 480V
30A
3Ø 600V
60A
120/240V
60A
3Ø 480V
60A
3Ø 600V
100A
120/240V
Plug
Advantage™ Series IP69k
Switch-Rated
Switch-Rated
Connector
Receptacle
IP67k
Connector
Receptacle
Plug
—
—
—
HBL420C12W
HBL420R12W
HBL420P12W
—
—
—
HBL420C7W
HBL420R7W
HBL420P7W
HBLS430P12W HBLS430C12W HBLS430R12W HBL430C12W
HBL430R12W HBL430P12W
HBLS430P7W HBLS430C7W
HBLS430R7W
HBL430C7W
HBL430R7W
HBL430P7W
HBLS430P5W HBLS430C5W
HBLS430R5W
HBL430C5W
HBL430R5W
HBL430P5W
HBLS460P12W HBLS460C12W HBLS460R12W HBL460C12W
HBL460R12W HBL460P12W
HBLS460P7W HBLS460C7W
HBLS460R7W
HBL460C7W
HBL460R7W
HBL460P7W
HBLS460P5W HBLS460C5W
HBLS460R5W
HBL460C5W
HBL460R5W
HBL460P5W
—
—
—
HBL4100C12W HBL4100R12W HBL4100P12W
Watertight Safety-Shroud® Twist-Lock® Devices
• Constructed of highly impact-resistant PBT thermoplastic for a UL Type 4X rating in heavy duty environments
• Safety-Shroud virtually eliminates bent and broken plug blades, leading to longer equipment life while
providing extra protection for personnel
Rating Color
Coded by Voltage
6
Poles/Wires
Connector
Plug
Receptacles
20A 125V
2P/3W
HBL2313SW
HBL2311SW
HBL2310SW
20A 250V
2P/3W
HBL2323SW
HBL2321SW
HBL2320SW
20A 277V
2P/3W
HBL2333SW
HBL2331SW
HBL2330SW
20A 3Ø 250V AC
3P/4W
HBL2423SW
HBL2421SW
HBL2420SW
30A 3Ø 250V AC
3P/4W
HBL2723SW
HBL2721SW
HBL2720SW
30A 3Ø 480V AC
3P/4W
HBL2733SW
HBL2731SW
HBL2730SW
www.hubbell-wiring.com
For complete listing of products see our full line catalogs.
®
Wiring Device-Kellems
Watertight Devices
• Smooth body design minimizes dirt and debris collection
• Industry best strain relief assures consistent sealing and max cord retention
• Corrosion-resistant nickel plated blades and stainless steel captive assembly screws
• NEMA 3R, 3RX, 4, 4X, 6, 6P, IP65, IP66, IP67
Straight Blade
Rating
Poles/
Wires
Color
Plug
Connector
Receptacle
with Lift Cover
Duplex
Receptacle
NEMA 5-15
15A 125V
2P/3W
Yellow
Black
HBL14W47A
HBL14W47BK
HBL15W47A
HBL15W47BK
HBL60W47
—
HBL60W47D*
—
NEMA 6-15
15A 250V
2P/3W
Yellow
HBL14W49
HBL15W49
HBL60W49
HBL60W49D*
NEMA 5-20
20A 125V
2P/3W
Yellow
HBL14W33A
HBL15W33A
HBL60W33
HBL60W33D*
NEMA 6-20
20A 250V
2P/3W
Yellow
HBL14W48
HBL15W48
HBL60W48
HBL60W48D*
National Sanitation
Foundation (NSF)
Known as The Most
Trusted Name in Food
Safety™, NSF International
has been helping businesses
in the agriculture, processing,
food equipment, restaurant
and retail industries to navigate
the food safety and regulatory
environment for nearly 70
years.
© 2014 NSF International. All rights reserved.
NEMA
IEC
Type Enclosure
Class Basic Description
No.
4
IP66
4X
IP66
6
IP67
12
IP52
Twist-Lock® Devices
Rating
Poles/
Wires
Color
Plug
Connector
Receptacle
with Lift Cover
Duplex
Receptacle
NEMA L5-15
15A 125V
2P/3W
Yellow
Black
HBL24W47A
HBL24W47BK
HBL25W47A
HBL25W47BK
HBL65W47
—
HBL65W47D*
—
NEMA L7-15
15A 277V
2P/3W
Yellow
HBL24W34
HBL25W34
HBL65W34
HBL65W34D*
NEMA L5-20
20A 125V
2P/3W
Yellow
Black
HBL26W47
HBL26W47BK
HBL27W47
HBL27W47BK
HBL67W47
—
—
—
2P/3W
Yellow
HBL26W48
HBL27W48
HBL67W48
—
2P/3W
Yellow
HBL26W49
HBL27W49
HBL67W49
—
3P/4W
Yellow
HBL26W74
HBL27W74
HBL67W74
—
NEMA L15-20
20A 3Ø 250V AC
3P/4W
Yellow
Black
HBL26W75
HBL27W75
HBL67W75
HBL26W75BK HBL27W75BK
—
—
—
NEMA L5-30
30A 125V
2P/3W
Yellow
Black
HBL28W47
HBL28W47BK
HBL29W47
HBL29W47BK
HBL69W47
—
—
—
2P/3W
Yellow
HBL28W49
HBL29W49
HBL69W49
—
3P/4W
Yellow
HBL28W74
HBL29W74
HBL69W74
—
NEMA L6-20
20A 250V
NEMA L7-20
20A 277V
NEMA L14-20
20A 125/250V
NEMA L7-30
30A 277V
NEMA L14-30
30A 125/250V
For complete listing of products see our full line catalogs.
www.hubbell-wiring.com
Watertight, Dusttight
Indoor, Outdoor
Watertight, Dusttight,
Corrosion-Resistant
Indoor, Outdoor
Watertight, Dusttight
Sleet (Ice) Resistant
Indoor, Outdoor
Industrial Use,
Dusttight, Driptight
Indoor
7
Corrosive Environments
Food processing areas can be particularly corrosive for electrical
connections, calling for an extra level of safety and protection. Hubbell
offers a wide range of plugs, connectors, and receptacles that are
specifically designed to withstand corrosive environments.
Corrosion Resistant Devices
• UV stabilized, chemical and oil resistant receptacle faces are impact resistant in refrigerated environments
• Nickel plated contacts and stainless steel hardware protect metallic components from corrosion
• Powerful nylon cord grips on plugs and connectors prevent wire strain on terminals and prevent cord
pull-outs
Weather Resistant
Receptacles
Per National Electrical
Code (NEC®) Article
406.9; all 125 and 250 volt,
15 and 20 amp non-locking
receptacles for use in damp or
wet locations shall be a listed
weather resistant type. Listed
devices are required to have a
WR marking on the face visible
when installed.
WR
NEC® 110.11 Electrical
Installations
Unless identified for use in the
operating environment, no
conductors or equipment shall
be located in damp or wet
locations.
Straight Blade
Rating
Poles/
Wires
15A 125V
20A 125V
Connector
Duplex
Lift Cover
Plug
Duplex Receptacle Single Receptacle
2P/3W HBL52CM69C
HBL52CM66C
HBL52CM62
HBL52CM61
—
2P/3W HBL53CM69C
HBL53CM66C
HBL53CM62
HBL53CM61
HBL52CM21
Twist-Lock®
Rating
Poles/
Wires
15A 125V
2P/3W HBL47CM29C HBL47CM20C HBL47CM00
20A 125V
2P/3W HBL23CM13
Connector
Duplex
Receptacle
Plug
HBL23CM11
Single Receptacle Lift Cover
—
—
HBL74CM25WOA
HBL23CM10
HBL74CM25WOA
Weatherproof Covers
• Available in either cast aluminum or impact and UV resistant PBT materials
• Stainless steel springs and mounting hardware makes for superior corrosion resistance
• For FS/FD box mounting For device mounting
Covers
Duplex
Gray
Yellow
Duplex Cast Aluminum Thermoplastic
for Horizontal Mounting Vertical Mounting
Aluminum
Gray
HBL5221
HBL5222
HBL52CM21
HBL52CM22
HBL5206WO
HBL5205WO
Thermoplastic for Vertical Mounting
Receptacle Covers
HBL5226H
Vertical FS/FD Mounting
Face Diameter inches (mm)
1.36"-1.39" (34.5-35.3)
8
HBL5226
GFCI
Thermoplastic
Horizontal Mounting
Gray
Face Diameter inches (mm)
1.55" - 1.58" (39.4-35.3)
Color
Thermoplastic
Cast Aluminum Thermoplastic
Gray
Yellow
HBL7423WO
HBL74CM23WO
HBL7420
—
Face Diameter inches (mm)
1.68" - 1.72" (42.7-43.7)
Cast Aluminum Thermoplastic
HBL7425WOA
HBL7420
HBL74CM25WOA
—
HBL7424WO
HBL74CM24WO
Cast Aluminum
HBL3393
—
Wet Locations: Thermoplastic w/ cover "open" Cast Aluminum w/ cover "closed"
www.hubbell-wiring.com
For complete listing of products see our full line catalogs.
®
Extreme Temperatures
Wiring Device-Kellems
Extreme temperature changes can wreak havoc on electrical components
and devices that aren’t constructed to withstand a food processing
environment. Hubbell products are designed to withstand temperature
fluctuations and accommodate expansion and contraction when necessary.
H-MOSS®|MAXX™ Harsh Sensors
• Watertight occupancy sensor is ideal for energy savings in harsh environments
• Line and low voltage options are available
• Watertight OPTIMYZER is IP65, NEMA 3R watertight and outdoor rated
Outdoor Rated Watertight Wall Mount PIR Sensor
IP66, NEMA 4X
Description
Voltage
Catalog Number
Heavy duty wall or pendant mount PIR sensor;
-40°F to 149°F (-40°C to 65°C) operating temperature range;
isolated relay, photocell and 160° of coverage
24V DC
AHP1600WRP*
* Must use control unit CU300HD
Extreme Temperature PIR Ceiling Sensor
Description
24V DC Sensor
NEMA 4X Enclosure
Upgraded ceiling PIR sensor; isolated relay and photocell;
-40°F to 149°F (-40°C to 65°C) operating temperature range;
Use ACIPE to make NEMA 4X watertight
AHP1500CRP*
ACIPE
* Must use control unit CU300HD
Watertight OPTIMYZER®
IP66, NEMA 3R
Description
Voltage
Catalog Number
PIR sensor, relay with photocell
PIR sensor, 2 relays with photocell
120-347V AC
120-347V AC
HMHB21UPCW
HMHB22UPCW
PIR sensor, 1 double pole relay with photocell
PIR sensor, 1 double pole relay with photocell
208, 240V AC
480V AC
HMHB23APCW
HMHB23BPCW
PIR sensor with photocell
24V DC
HMHB2LVPCW*
Description
Voltage
Catalog Number
Control Unit for use with AHP1600WRP, AHP1500CRP and
HMHB2LVPCW
120-277V AC
CU300HD
Whether there is a need
to comply with codes and
standards such as provisions
9.4.1.1 of ASHRAE 90.1
and 130.1(c) of CEC Title
24 for Automatic Lighting
Shutoff or to simply achieve
significant energy savings,
H-MOSS®|MAXX™ from
Hubbell is the ideal solution
for those indoor or outdoor
harsh environments where
heavy duty devices are
required.
* Must use control unit CU300HD
Control Unit
50 Amp Twist-Lock®
• Thermoplastic polyester interior of plugs provides heat resistance and impact strength
• Super tough nylon housing offers better impact qualities
• Padlock capable shroud allows compliance to OSHA lockout tagout regulation 29 CFR 1910 .147
NEMA Rating
Poles/Wires
Plug
Connector
Receptacle
Flanged Inlet
50A 125V
2P/3W
CS6361C
CS6360C
CS6370
CS6377
50A 250V
2P/3W
CS8265C
CS8264C
CS8269
CS8275
50A 480V
2P/3W
CS8465C
CS8464C
CS8469
CS8475
50A 125/250
3P/4W
CS6365C
CS6364C
CS6369
CS6375
50A 3Ø 250
3P/4W
CS8365C
CS8364C
CS8369
CS8375
50A 3Ø 480
3P/4W
CS8165C
CS8164C
CS8169
CS8175
For complete listing of products see our full line catalogs.
www.hubbell-wiring.com
9
Process Automation
Hubbell’s complete line of electrical components and devices includes
cost-effective alternatives to conventional wiring methods, along with fast
installation and excellent performance. It also allows for easy retrofits to
existing hard-wired installations.
Linkosity®
• Reconfigurable factory defined assemblies that can be easily installed as a cost effective alternative to
conventional wiring methods, supports moves, adds and changes
• Enables fast installation and high technical performance for 20A and 30A circuits up to 600V
Cables and Receptacles
Power Components 20A, 30A up to 600V
Device Type
NEC 430.102 (B)
®
(1) Separate Motor
Disconnect. A
disconnecting means
for the motor shall be
located in sight from
the motor location and
the driven machinery
locations.
(2) Controller Disconnect.
The controller
disconnecting means
required in accordance
with 430.102(1) shall be
permitted to serve as the
disconnecting means for
the motor if it is in sight
from the motor location
and the driven machinery
location.
PH
PM
PN
PF
PG
PQ
PR
PS
RF
RM
Ratings
Double Ended Cable - Male/Female Straight
Male Single Ended Straight
Male Single Ended 90°
Female Single Ended Straight
Female Single Ended 90°
Double Ended Cable with Female 90°
Double Ended Cable with Male 90°
Double Ended Cable with (2) 90° Connectors
Female Receptacle; ½" N.P.T. rear thread
Male Receptacle (Inlet); ½” N.P.T. rear thread
Wires Conductor Colors** Length (ft.)
20 20A up to 600V
02 - PA
05
Green/Yellow;
Black (all others)
PB
23 20A up to 600V
03
Green/Yellow
Specialty construction
04
White
(Includes isolated ground 05
Black (all others)
on 6 wire and 10AWG
06
super neutral conductor
**Other color
on 5 and 6 wire devices)
codes available
30 30A up to 600V
04
upon request
001
005
010
015
020
025
030
035
040
045
050
1'
5'
10'
15'
20'
25'
30'
35'
40'
45'
50'
Example Catalog Number: PH2306PB050
LINKOSITY® Tees
Description
Catalog Numbers
M/F/F Tee, 20A, 2P
M/F/F Tee, 20A, 3P
M/F/F Tee, 20A, 5P
M/F/F Tee, 20A SNIG, 4P
M/F/F Tee, 20A SNIG, A Phase Tap
M/F/F Tee, 20A SNIG, B Phase Tap
M/F/F Tee, 30A, 4P
TX2002002002T00
TX2003002003T00
TX2005002005T00
TX2304002304T00
TX2306002304A00
TX2306002304B00
TX3004003004T00
Closure Caps
Description
For use with
Female Receptacle Male Inlet
20A and 30A CCMBC
Receptacle
Closure Cap
CCFBC
MotorQuick®
• Combines Circuit-Lock® motor disconnect with plug-and-play LINKOSITY® system for faster
installation and replacement of motors.
• Easily retrofits to existing hard wired installations with LINKOSITY® components.
• HBLDS3 series are IP69k and certified by
Description
30A 3 Pole With (1) pre-wired
600V AC LINKOSITY® female
for hygiene in food processing applications.
Type 1
HBL1389D
Non-Metallic
Type 2
HBLDS3
Non-Metallic
Type 2
HBLDS3SS
Stainless Steel
Type 2
HBLDS3SSR
Stainless Steel
HBL1389MQR
HBLDS3MQR
HBLDS3SSMQR HBLDS3SSRMQR
receptacle (load side)
With 5 ft. pre-wired
HBL1389MQ5 HBLDS3MQ5
LINKOSITY® female cable
(load side)
With (1) pre-wired
HBL1389MQR2 HBLDS3MQR2
LINKOSITY® male receptacle
(line side) and (1) pre-wired
LINKOSITY® female
receptacle (load side)
10
www.hubbell-wiring.com
HBLDS3SSMQ5
HBLDS3SSRMQ5
HBLDS3SSMQR2 HBLDS3SSRMQR2
For complete listing of products see our full line catalogs.
®
Wiring Device-Kellems
Twist-Lock® Plugs, Connectors and Receptacles
• Integral dust shield protects wiring chamber from dust or contaminates
• Tough ribbed nylon housing provides a secure grip with impact and chemical resistance
• Two part cord grip tightens with two screws for maximum strain relief
Hubbell Twist-Lock®...
The Industry Standard!
NEMA Rating
Color Coded by Voltage
Poles/Wires
Plug
Connector
Receptacle
15A 125V AC
2P/3W
HBL4720C
HBL4729C
HBL4710
20A 125V AC
2P/3W
HBL2311
HBL2313
HBL2310
20A 250V AC
2P/3W
HBL2321
HBL2323
HBL2320
20A 3Ø 250V AC
3P/4W
HBL2421
HBL2423
HBL2420
20A 3Ø 480V AC
3P/4W
HBL2431
HBL2433
HBL2430
30A 3Ø 250V AC
3P/4W
HBL2721
HBL2723
HBL2720
30A 3Ø 480V AC
3P/4W
HBL2731
HBL2733
HBL2730
Panel-Safe®
• Available in Type 4, 12 and 4X versions with protective clear cover
• Provides overcurrent protection for power ports
• Ensures safety with finger-safe contacts and Hubbell GFCI functionality
Description
NEMA TYPE 4, 12
Power Only 20A 125V GFCI with In-Cabinet Receptacle
Data Only
PR20
20A 125V GFCI with In-Cabinet Receptacle and Cat. 5e Ethernet Access
PR205E
PR4X205E
20A 125V GFCI with In-Cabinet Receptacle, Cat. 5e Ethernet Access and
3A Circuit Breaker
PR205EB
PR4X205EB
20A 125V GFCI Power and Cat. 5e Ethernet, DH + Combo (DB9/8M Din)
P20DH5E
15A 125V Power and Cat. 5e Ethernet Access
P155E
P4X155E
15A 125V Power, Cat. 5e Ethernet Access and 3A Circuit Breaker
P155EB
P4X155EB
15A 125V Power and (2) Cat. 5e Ethernet Access
P155E2
For complete listing of products see our full line catalogs.
• All external utility
receptacles must be
covered.
• All covers must maintain
the enclosure rating.
NFPA 70E:
• Electrical equipment
enclosure scan ONLY be
accessed by qualified
personnel with extensive
protective clothing and
equipment, including fireresistant suits and hoods
with non-conductive
wands.
—
P4X5E
—
—
Power and Data
• All utility receptacles must
be GFCI protected.
NEMA TYPE 4X
P5E
PDB9
PDH5E
Cat. 5e Ethernet Access only
DB9 Interface Connector only
DH + Combo (DB9/8M Din) and Cat. 5e Ethernet
NFPA 79
Section 16.1.1(6) 16.1.2
Control Panel Utility
Receptacle Standard
—
—
www.hubbell-wiring.com
11
Personnel Protection
The combination of GFCI protection and tamper-resistant safety provides an
ideal one-stop solution. Hubbell’s tamper-resistant GFCI devices also include
a weather-resistant rating per NEC 406.9, providing UV and corrosion
resistance.
GFCI Receptacles
• Self-Test units continually tests and monitors for protection automatically
• No power at device face if reverse wired, eliminating false assumption of protection
• Patented tamper-resistant design limits improper access to energized contacts
AUTOGUARD® Self Test GFCI Receptacles
For non-residential
installations all 125V
15 and 20 AMP receptacles
installed in locations specified
in NEC® Article
210.8(B)(1) to (8) shall have
ground fault circuit interrupter
protection for personnel.
These areas include:
(1) Bathrooms
(2) Kitchens
(3) Roof Tops
(4) Outdoors
(5) Sinks (within 6’ of edge)
(6) Indoor Wet Locations
(7) Locker Rooms / Shower
Facilities
(8) Garages / Service Bays
Description
Color
15A 125V
20A 125V
Flush, polyester face; back and side wired;
multiple drive screws; 10 kA Short Circuit
Current Rating
Black
Brown
Gray
Ivory
Red
White
GFR5262SGBK
GFR5262SG
GFR5262SGGY
GFR5262SGI
GFR5262SGR
GFR5262SGW
GFR5362SGBK
GFR5362SG
GFR5362SGGY
GFR5362SGI
GFR5362SGR
GFR5362SGW
Locking Switches
• Prevents unauthorized control of lighting or ventilation control
• Keys supplied with each locking switch
• One piece integral grounding terminal provides a low resistance ground path
AC Barrel Key
Locking Switches
20A 120-277 Volt
120-277 Volt
Pole
20A
Pole
15 Amp
20 Amp
Single Pole
Double Pole
Three-Way
Four-Way
Barrel key replacement
HBL1221RKL
HBL1222RKL
HBL1223RKL
HBL1224RKL
HBL1209RKL
Single Pole
Double Pole
Three-Way
Four-Way
Replacement key
HBL1201L
HBL1202L
HBL1203L
HBL1204L
HBL1209
HBL1221L
HBL1222L
HBL1223L
HBL1224L
Circuit Guard® Portable GFCI
• Provides a watertight housing for maximum safety in harsh environments
• Available with either automatic and manual set feature to fit the application
• Bright indicator light provides fault confirmation from a distance
Portable GFCI
Line Cords
Description
Length
Industrial Grade
Automatic
Manual
15A 120V AC
18 in.
2 ft.
6 ft.
25 ft.
3 ft.
GFP4C15A
—
GFP6C15A
GFP25C15A
—
GFP4C15M
—
GFP6C15M
GFP25C15M
GFP3C20M
20A 120V AC
Commercial Grade Single
Automatic
Manual
Commercial Grade Triple Tap
Automatic
Manual
—
GFP2CA
—
GFP25CA
—
GFP2TTA
—
GFP25TTA
2 ft. cord length; 15A and 20A 120V AC
Automatic
12
Industrial Grade Manual Set; 15A 125V
Manual
GFPIL15125A
GFPIL15125TRIA
GFPIL15125M
GFPIL15125TRIM
Black
Yellow
Black w/ 1' line cord
GFPIL20250LKA
GFPIL20250LKM
Commercial Grade
www.hubbell-wiring.com
—
GFP2TTM
—
GFP25TTM
Wired-On Straight Blade
Portable GFCI Plugs
In-Line GFCI
Single
Triple Tap
15A
Locking
20A
—
GFP2CM
—
GFP25CM
Field
Wireable
Automatic
Manual
GFP5266C
GFP5266CY
GFP1C
GFP515A
GFP515
For complete listing of products see our full line catalogs.
®
Wiring Device-Kellems
Switched Enclosures
• UL Listed as a manual motor controller and "suitable as a motor disconnect"
• UL witnessed IP69k and UL Type 4x and 12 environmental ratings
• Certified by NSF for hygiene in food processing applications
Labelless Non-Metallic and Stainless Steel Disconnect Switch
Amps
Square Top
30A
60A
100A
HBLDS3SS
HBLDS6SS
HBLDS10SS
Stainless Steel
Sloped Top
Non-Metallic
Square Top
HBLDS3SSR
HBLDS6SSR
HBLDS10SSR
HBLDS3
HBLDS6
HBLDS10
Note: for enclosure with auxiliary contact, HBLAC1, please add an "AC" suffix to the
catalog number.
For disconnect switch containing auxiliary contact HBLAC2 for use with Variable
Frequency Drives, add a "VFD" suffix to the catalog number.
UL355 4.3, 4.4
Cord Reels, that employ
Ground-Fault Circuit
Interrupter outlet(s) and are
connected to the power
supply by means of flexible
cord with an attachment plug
and/or that employ slip rings,
shall be provided with open
neutral protection as part of
the GFCI.
Circuit-Lock® Fused Disconnect Switches
Description
30A
60A
Disconnect Switch
Auxiliary contacts, normally open, A600 pilot duty
Auxiliary contacts, normally closed, A600 pilot duty
FDS30*
ACFSNO
ACFSNC
FDS60*
*Class "J" fuses not included.
30A Units supplied with (2) 1 in. N.P.T. raintight conduit fittings.
60A Units supplied with (2) 1¼ in. N.P.T. raintight conduit fittings.
TrukTrak® and TredTrak®
NEC® 110.26(E)(2)
• Safeguards cables, hoses and cords from vehicle and pedestrian traffic
Outdoor. Outdoor electrical
equipment shall be installed
in suitable enclosures and
shall be protected from
accidental contact by
unauthorized personnel, or
by vehicular traffic.
• TrukTrak® is ideal for industrial environments where trucks and forklifts are present
• TredTrak® supports pedestrian and light vehicle traffic
TrukTrak® and TredTrak® Systems
Description
TrukTrak®
TredTrak®
5 Channel, blue and yellow
HBLTT5B
5 Channel end caps (pair only), yellow HBLTT5ECB
HBLTRED5B
HBLTRED5ECB
3 Channel, blue and yellow
HBLTT3B
3 Channel end caps (pair only), yellow HBLTT3ECB
2 Channel, blue and yellow
HBLTT2B
—
—
—
Industrial Cord Reels and Hose and Air Reels
• Keeps cords and hoses organized and off the floor, saves time and money and improves safety while
extending product life
• Provide safe convenient power and lighting for demanding industrial applications and environments
• Powder coated steel construction can be ceiling, wall or bench mounted
Industrial Power
Cord Reels
Air/Water Hose
Reels
12/3 SJEO Cable Type, 125V
Cord End
Max Pressure 300 PSI
Description
NEMA Style
Connector HBL5269C 15A
HBL5369C 20A
Portable
15A gray duplex
duplex
20A gray duplex
outlet box 15A gray GFCI duplex
20A gray GFCI duplex
Pivot Base 330° Rotation
5-15R
5-20R
5-15R
5-20R
5-15R
5-20R
–
Catalog Number
Cord End
Cable Ft.
Catalog Number
HBL45123C
HBL45123C20
HBL45123R
HBL45123R20
HBL45123GF15
HBL45123GF20
HBL340PB
Low Pressure
1 4
/ " ID.
Low Pressure
3 8
/ " ID.
35 (10.7)
50 (15.2)
25 (7.6)
50 (15.2)
70 (21.3)
35 (10.7)
50 (15.2)
HBLHR2535
HBLHR2550
HBLHR3825
HBLHR3850
HBLHR3870
HBLHR5035
HBLHR5050
For complete listing of products see our full line catalogs.
Low Pressure
1 2
/ " ID.
www.hubbell-wiring.com
13
Harsh Locations
Hubbell’s unfused disconnect and mechanical interlock switches are ideal
for applications containing flammable gases or vapors and ignitable dusts or
fibers. Hubbell devices are also suitable for use in outdoor or indoor damp,
wet, and dirty locations, or in areas where frequent wash downs, heavy rain, or
water-spray routinely occurs.
Hazardous Location Non-Fused UL1686 Mechanical Interlocks
• Plug and switch are interlocked for superior safety
• UL1686 C1 listed and fully interchangeable with other UL1686 C1 devices
• Compact size and footprint for easy placement
• NEMA 4X with receptacle lid turned shut or with plug locking ring tightened
NFPA 33 Standard for
Spraying Applications
Using Flammable or
Combustible Materials
covers spray application of
flammable or combustible
materials by a variety of methods.
Contains requirements for the
maintenance of safe conditions
as well as personal safety.
NFPA 34 Standard for
Dipping, Coating and
Printing Processes Using
Flammable or Combustible
Liquids covers fire and
explosive hazards. Includes
water-borne and water reducible
materials.
Description
Circuit
Receptacle
Plug
30 AMP
600V AC
2W 3P
3W 4P
HBLVSQ3023
HBLVSQ3034
HBLVP3385
HBLVP3485
60 AMP
600V AC
2W 3P
3W 4P
HBLVSQ6023
HBLVSQ6034
HBLVP6385
HBLVP6485
Notes: HBLVSQ 30 Amp models come standard with 1" drilled and tapped conduit openings top
and bottom plus two 1" x ¾" reducers and one ¾" close-up plug for maximum flexibility. 60 amp
models come with one 1½" opening on top and bottom and one 1½" close-up plug.
Hazardous Location Non-Fused Disconnect Switches
• Compact size provides application flexibility and cost savings
• Fewer cover bolts reduces installation and maintenance time
• Removable ductile mounting feet adjust to irregular mounting surfaces
• UL 98 certified switch
• Class I, Div. 1 & 2, Groups B,C,D
• Class l, Zones 1 & 2, Groups llB+ H2, llA
• Class II, Div. 1 & 2, Groups E,F,G
• Class III
• NEMA 3, 4, 4X, 7(B,C,D), 9(E,F,G)
14
Description
Rating
Catalog Number
Disconnect switch,
3 Pole 600V AC/230V DC
30A
60A
100A
HBLB7NFD13A
HBLB7NFD26A
HBLB7NFD21A
Disconnect switch with auxiliary contact,
3 Pole 600V AC/230V DC
30A
60A
100A
HBLB7NFD13AA
HBLB7NFD26AA
HBLB7NFD21AA
www.hubbell-wiring.com
For complete listing of products see our full line catalogs.
®
Wiring Device-Kellems
Hazardous Location/Confined Space Lighting
• Fluorescent and incandescent light bulbs styles available
• Low voltage confined space entry lights are suitable for hazardous locations
Hazardous Location Lights
Lumen
Wattage Output
Cord Type
Cord
Length
Catalog Number
Fluorescent, Class 1, Div 1, Groups
C & D, Class 2, Div 1, Groups F & G,
12V, inline transformer
26
16/3 SOW
60 ft.
HBLXF6012V
Incandescent, Class 1, Div1, Groups
C & D, 12V, inline transformer
75
720
16/3 SOW
60 ft.
HBLXI6012V
Fluorescent, Class 1, Div 1, Groups
C & D, Class 2, Div 1, Groups F & G,
120V, less plug
26
1800
16/3 SOW
50 ft.
HBLXF50120V
Incandescent, Class 1, Div 1 Groups
C & D, 120V, less plug
100
Description
1800
NEC® 500-503, 505
covers the requirements
for electrical installations
in locations classified as
hazardous due to the materials
handled, processed, or stored
in those locations.
NEC 516
1230
16/3 SOW
50 ft.
HBLXI50120V
H-MOSS®|MAXX™ Harsh Sensors
covers the regular or frequent
application of flammable
liquids, and combustible
liquids, and combustible
powder by spray operations
at temperatures above flash
points.
• Watertight occupancy sensor is ideal for energy savings in harsh environments
• Line and low voltage option are available
• Watertight OPTIMYZER® is IP65, NEMA 3R watertight and outdoor rated
Outdoor Rated Watertight Wall Mount PIR Sensor
IP66, NEMA 4X
Description
Voltage
Catalog Number
Heavy duty wall or pendant mount PIR sensor;
-40°F to 149°F (-40°C to 65°C) operating temperature range;
isolated relay, photocell and 160° of coverage
24V DC
AHP1600WRP*
* Must use control unit CU300HD
Extreme Temperature PIR Ceiling Sensor
Description
24V DC Sensor
NEMA 4X Enclosure
Upgraded ceiling PIR sensor; isolated relay and photocell;
-40°F to 149°F (-40°C to 65°C) operating temperature range;
Use ACIPE to make NEMA 4X watertight
AHP1500CRP*
ACIPE
* Must use control unit CU300HD
Watertight OPTIMYZER®
IP66, NEMA 3R
Description
Voltage
Catalog Number
PIR sensor, relay with photocell
PIR sensor, 2 relays with photocell
120-347V AC
120-347V AC
HMHB21UPCW
HMHB22UPCW
PIR sensor, 1 double pole relay with photocell
PIR sensor, 1 double pole relay with photocell
208, 240V AC
480V AC
HMHB23APCW
HMHB23BPCW
PIR sensor with photocell
24V DC
HMHB2LVPCW*
Description
Voltage
Catalog Number
Control Unit for use with AHP1600WRP, AHP1500CRP and
HMHB2LVPCW
120-277V AC
CU300HD
* Must use control unit CU300HD
Control Unit
For complete listing of products see our full line catalogs.
www.hubbell-wiring.com
15
Available eTools
Food Processing eTour
Area
Product Page
This interactive, virtual tour of a food processing plant takes visitors through 15 unique spaces that include
food processing areas such as material preparation, mixing and processing as well as cooling, cooking and
packaging. Other areas include employee services, facility management and offices. As users navigate their
way through the virtual plant, the eTour demonstrates where and how Hubbell products can be deployed to
offer safety, efficiency, performance, and durability solutions in these spaces. Visit www.hubbell-wiring.com
to take the tour.
Twist-Lock® App
When you’re on the go... Use the New Twist-Lock® App from Hubbell.
Download it today!
®
Wiring Device-Kellems
AdvAntAge™ SerieS
Switch-rAted
iec Pin & Sleeve
Available Literature
Hubbell offers an extensive
literature library for product
support. Downloadable PDFs
are available on line.
Highest Performing IEC Pin & Sleeve Connections
for the Most Demanding Environments
Hubbell Wiring DeviceKellems Catalog
Advantage Series
Swithced Pin & Sleeve
Watertight Wiring
Devices
www.hubbell-wiring.com
Hubbell Wiring Device-Kellems
Hubbell Incorporated (Delaware)
40 Waterview Drive, Shelton, CT 06484
Phone (800) 288-6000 • FAX (800) 255-1031
Printed in U.S.A. Specifications subject to change without notice. ® Registered trademark of Hubbell Incorporated.
WLBVM013
1/16
Circuit-Lock® and
MotorQuick
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement