Catalog Pro Sound
PRO
SOUND
Loudspeakers and Electronics
At Electro-Voice, we Live for Sound. For
more than 85 years, we have designed and
engineered leading-edge sound reinforcement
solutions that empower the performer, exceed
the expectations of the audio professional, and
elevate the audience experience.
2
CONTENTS
X-Line
4
XLC
6
XLCi
7
XLVC
8
Xi Series
10
EVF Front-Loaded Systems
12
EVF Front-Loaded Subwoofers
16
EVH Horn-Loaded Systems
18
EVA Expandable Vertical Array
20
EVA Subwoofers
21
EVU Ultracompact Systems
22
EVI Variable Intensity Loudspeakers Systems
24
EVID Surface-Mount Systems
26
EVID In-Wall Speaker Systems
27
EVID Ceiling Speaker Systems
28
Specialty Loudspeakers
30
Monitors
31
ZX/ZXA
32
EVM12L Guitar Speakers
35
SX
36
Rx/QRx
38
Tour X
40
Live X
42
ZLX
44
Rigging and Accessories
46
Tour Grade Amplifiers
52
Precision Series Remote Control Amplifiers
54
Q Series Amplifiers
56
CPS Contractor Precision Series Amplifiers
58
CP Compact Precision Amplifiers
61
PA Series Commercial Power Amplifiers
62
Netmax System Controller
64
Sound System Processors
66
3
LOUDSPEAKERS
CONCERT
X-Line is a concert sound loudspeaker system that
combines high-level sonic impact and vocal intelligibility
with the uniform, predictable coverage that only a line
array can deliver. The X-Line system provides wide
horizontal dispersion from a single vertical line array with
exceptionally coherent wave-front summation in the
vertical plane. Extended low-frequency polar control
produces more uniform power response, further enhancing
overall intelligibility.
INSTALL
Xvls
The two full-range boxes in the line are three-way
systems that incorporate the Electro-Voice Hydra timesynchronized, high-frequency plane wave generator to
provide excellent summing in the far field. They also employ
Ring-Mode Decoupling (RMD) to provide level-independent
fidelity, greater mid-bass clarity, and high-frequency
accuracy. All models in the line share the same footprint and
are connected by proprietary rigging that facilitates rapid
venue load-in and load-out.
THREE-WAY LONG-THROW ELEMENT
High-output, three-way line array system
Rectangular cabinet design
90° horizontal coverage pattern ideal for long-throw applications
EV Hydra time-synchronized vertical plane-wave generator provides excellent far-field summing
Ring-Mode Decoupling (RMD) provides level-independent fidelity,
greater mid-bass clarity, and high-frequency accuracy
• Proprietary rigging allows for rapid venue load-in and load-out
PORTABLE PA
•
•
•
•
•
MOBILE AUDIO
Xvlt
THREE-WAY MEDIUM-THROW ELEMENT
•
•
•
•
•
High-output, three-way line array system
Five-degree trapezoidal cabinet design for lower "J" section of linear array
120° coverage typical for medium-throw assignment
EV Hydra time-synchronized vertical plane-wave generator provides excellent far-field summing
Ring-Mode Decoupling (RMD) provides level-independent fidelity,
greater mid-bass clarity, and high-frequency accuracy
• Proprietary rigging allows for rapid venue load-in and load-out
Xsub(F)
DUAL 18 INCH SUBWOOFER ELEMENT
•
•
•
•
4
High-output, line array subwoofer system
Rectangular cabinet with footprint identical to other X-Line systems
Can be flown or ground-stacked. Also available in non-flying version
Proprietary rigging allows for rapid venue load-in and load-out
Frequency Response (-3 dB)
Xvls
Xvlt
Xsub(F)
50–16,000 Hz
50–16,000 Hz
40–400 Hz
Frequency Range (-10 dB)
30–17,000 Hz
30–17,000 Hz
35–500 Hz
Horizontal Coverage
90°
120°
—
Vertical Coverage*
5°
8°
—
LF Power Handling1
1200 W continuous, 4800 W peak
1200 W continuous, 4800 W peak
1200 W continuous, 4800 W peak4
2
MB Power Handling
600 W continuous, 2400 W peak
600 W continuous, 2400 W peak
—
HF Power Handling3
225 W continuous, 900 W peak
225 W continuous, 900 W peak
—
Sensitivity* LF/MB/HF
98/108/114 dB
97/107/114 dB
104 dB (half space)
Max. SPL* (calc., peak), LF/MB/HF
134/142/144 dB
133/141/144 dB
141 dB (half space)
Peak SPL @ 10m**
135 dB
135 dB
132 dB (half space)
LF Transducer
Two 15-in EVX-155PL
Two 15-in EVX-155PL
Two 18-in EVX-180B
MB Transducer
Two 8-in ND08
Two 8-in ND08
—
HF Transducer
Three 3-in ND6-16
Three 3-in ND6-16
—
Connectors
2 Neutrik NL8
2 Neutrik NL8
2 Neutrik NL8
Enclosure Material
Birch plywood, textured epoxy paint
Birch plywood, textured epoxy paint
Birch plywood, textured epoxy paint
Grille
Powder-coated steel
Powder-coated steel
Powder-coated steel
Environmental Specs
IEC 529 IP24, MIL STD 810
IEC 529 IP24, MIL STD 810
IEC 529 IP24, MIL STD 810
Dimensions (H (front/rear) x W x D)*
19.46/19.46 x 49 x 29.15 in
(494.3/494.3 x 1244.6 x 740.4 mm)
19.46/16.92 x 49 x 29.15 in
(494.3/429.7 x 1244.6 x 740.4 mm)
19.46/19.46 x 49 x 29.15 in
(494.3/494.3 x 1244.6 x 740.4 mm)
Net Weight*
257 lb (117 kg)
253 lb (115 kg)
202 lb (92 kg)
*Single Box @ 1 Meter
**4 Box Array @ 10 Meters
1
50-200 Hz
2
300-2000 Hz
3
1200-8000 Hz
4
50-100 Hz
MOBILE AUDIO
PORTABLE PA
INSTALL
CONCERT
LOUDSPEAKERS
X-Line
5
LOUDSPEAKERS
Whether at a medium-sized festival, in a large concert hall
or house of worship, or as a supplementary system used
with X-Line, XLC compact line arrays have a proven record
of performance and reliability. It's no wonder that XLC is
CONCERT
XLC127DVX
XLC907DVX
120° HORIZONTAL THREE-WAY COMPACT LINE ARRAY ELEMENT
90° HORIZONTAL THREE-WAY COMPACT LINE ARRAY ELEMENT
INSTALL
•
•
•
•
•
•
PORTABLE PA
XLC215
one of the most popular line array systems in the world. All
modules incorporate Quik-Rig hardware for fast set-up and
tear-down.
Accurate vertical control and coverage
Compact, lightweight modules
True three-way design
Triamp operation; biamp operation with optional mid-high crossover (XLC127DVX only)
Quik-Rig fast and simple integrated rigging
Supported by LAPS II array design/prediction software
HIGH-OUTPUT DUAL 15 INCH SUBWOOFER LINE ARRAY ELEMENT
MOBILE AUDIO
•
•
•
•
•
138 dB SPL
Footprint identical to XLC127DVX
Optional adapter grid for use with XLD281 and XLD291
Two DVX3150A transducers
Quik-Rig fast and simple integrated rigging
See page 46–47 for XLC Rigging and Accessories.
Frequency Response (-3 dB)
XLC907DVX
XLC215
65–16,000 Hz
40–400 Hz
Frequency Range (-10 dB)
54–17,000 Hz
54–17,000 Hz
30–400 Hz
Horizontal Coverage
120°
90°
—
LF Power Handling1
500 W continuous, 2000 W peak
500 W continuous, 2000 W peak
1000 W continuous, 4000 W peak4
MB Power Handling2
300 W continuous, 1200 W peak
300 W continuous, 1200 W peak
—
HF Power Handling3
150 W continuous, 600 W peak
150 W continuous, 600 W peak
—
Sensitivity* LF/MB/HF
95/101/111 dB
95/101/112 dB
102 dB
Max. SPL* (calc., peak), LF/MB/HF
128/132/139 dB
128/132/140 dB
138 dB
Peak SPL @ 10m**
130 dB
130 dB
124 dB
LF Transducer
12-in DVX3121A
12-in DVX3121A
Two 15-in DVX3150A
MB Transducer
Two 6.5-in DVN2065
Two 6.5-in DVN2065
—
HF Transducer
Two 3-in ND6-16
Two 3-in ND6-16
—
Connectors
2 Neutrik NL8
2 Neutrik NL8
2 Neutrik NL8
Enclosure Material
EVCoat–coated birch plywood
EVCoat–coated birch plywood
EVCoat–coated birch plywood
Grille
Powder-coated steel
Powder-coated steel
Powder-coated steel
Environmental Specs
IEC 529 IP24, MIL STD 810
IEC 529 IP24, MIL STD 810
IEC 529 IP24, MIL STD 810
Dimensions (H x W x D)*
14.25 x 39 x 22.5 in (362 x 991 x 572 mm)
14.25 x 39 x 22.5 in (362 x 991 x 572 mm)
21.5 x 39 x 22.5 in (546 x 991 x 572 mm)
Net Weight*
111 lb (50.4 kg)
111 lb (50.4 kg)
129 lb (58.5 kg)
*Single Box @ 1 Meter
**4 Box Array @ 10 Meters
1
100-500 Hz
2
500-2000 Hz
3
1600-8000 Hz
4
60-100 Hz
6
XLC127DVX
65–16,000 Hz
INSTALL
Accurate vertical control and coverage
Compact, lightweight modules
True three-way design
Triamp operation; biamp operation with optional mid-high crossover (XLCi127DVX only)
Fixed installation rigging
Supported by LAPS II array design/prediction software
PORTABLE PA
•
•
•
•
•
•
XLCi215
LOUDSPEAKERS
120° HORIZONTAL THREE-WAY COMPACT LINE ARRAY ELEMENT
90° HORIZONTAL THREE-WAY COMPACT LINE ARRAY ELEMENT
HIGH-OUTPUT DUAL 15 INCH SUBWOOFER ELEMENT
•
•
•
•
Footprint identical to other XLCi models
Two DVX3150A transducers
Compact and lightweight
Fixed installation rigging
MOBILE AUDIO
XLCi127DVX
XLCi907DVX
to that of the corresponding model in the XLC line. XLCi
loudspeakers are supported by LAPS II array design/
prediction software.
CONCERT
XLCi is a version of the XLC line that has been adapted for
permanent installations. XLCi features visually appealing
rigging that won't distract from architectural aesthetics. The
performance of the three modules in the line is identical
See page 47 for XLCi Rigging and Accessories.
Frequency Response (-3 dB)
XLCi127DVX
XLCi907DVX
XLCi215
65–16,000 Hz
65–16,000 Hz
40–400 Hz
Frequency Range (-10 dB)
54–17,000 Hz
54–17,000 Hz
30–400 Hz
Horizontal Coverage
120°
90°
300°
LF Power Handling1
500 W continuous, 2000 W peak
500 W continuous, 2000 W peak
1000 W continuous, 4000 W peak4
MB Power Handling2
300 W continuous, 1200 W peak
300 W continuous, 1200 W peak
—
HF Power Handling3
150 W continuous, 600 W peak
150 W continuous, 600 W peak
—
Sensitivity* LF/MB/HF
95/101/111 dB
95/101/112 dB
102 dB
Max. SPL* (calc., peak), LF/MB/HF
128/132/139 dB
128/132/140 dB
138 dB
Peak SPL @ 10m**
130 dB
130 dB
124 dB
LF Transducer
12-in DVX3121A
12-in DVX3121A
Two 15-in DVX3150A
MB Transducer
Two 6.5-in DVN2065
Two 6.5-in DVN2065
—
HF Transducer
Two 3-in ND6-16
Two 3-in ND6-16
—
Connectors
2 Neutrik NL8
2 Neutrik NL8
2 Neutrik NL8
Enclosure Material
EVCoat–coated birch plywood
EVCoat–coated birch plywood
EVCoat–coated birch plywood
Grille
Powder-coated steel
Powder-coated steel
Powder-coated steel
Environmental Specs
IEC 529 IP24, MIL STD 810
IEC 529 IP24, MIL STD 810
IEC 529 IP24, MIL STD 810
Dimensions (H x W x D)*
14.25 x 36.5 x 22.5 in (362 x 927 x 572 mm)
14.25 x 36.5 x 22.5 in (362 x 927 x 572 mm)
21.5 x 36.5 x 22.5 in (546 x 927 x 572 mm)
Net Weight*
105 lb (48.1 kg)
105 lb (48.1 kg)
124 lb (56.3 kg)
*Single Box @ 1 Meter
**4 Box Array @ 10 Meters
100-500 Hz
2
500-2000 Hz
3
1600-8000 Hz
4
60-100 Hz
1
7
LOUDSPEAKERS
When a line array with limited size and weight is required,
XLVC is the choice of professionals around the world. XLVC
Very Compact Line Arrays combine reliability, intelligibility,
and acoustic performance in a package that is easy to
CONCERT
XLD281
120° HORIZONTAL THREE-WAY DUAL 8 INCH LINE ARRAY ELEMENT
INSTALL
•
•
•
•
•
•
•
PORTABLE PA
XLD291
MOBILE AUDIO
Full-bandwidth, three-way element
CCT maintains 90° horizontal coverage to 250 Hz
Versatile subwoofer integration
Biamp or triamp operation
Neodymium transducers
Simple, quick, integrated rigging
Supported by LAPS II array design/prediction software
120° HORIZONTAL TWO-WAY SINGLE 8 INCH LINE ARRAY ELEMENT
90° HORIZONTAL TWO-WAY SINGLE 8 INCH LINE ARRAY ELEMENT
•
•
•
•
•
•
XCS312
Full-bandwidth, three-way element (60 Hz – 20 kHz)
CCT (Coverage Control Technology)
Versatile subwoofer integration
Biamp or triamp operation
Neodymium transducers
Simple, quick, integrated rigging
Supported by LAPS II array design/prediction software
90° HORIZONTAL THREE-WAY DUAL 8 INCH LINE ARRAY ELEMENT
•
•
•
•
•
•
•
XLE181
XLE191
configure and suspend. All cabinets feature simple, quick,
integrated rigging. System design is easy using ElectroVoice's free LAPS II array design/prediction software.
Full-bandwidth, two-way element
Most compact, very lightweight
Biamp or full-range operation
Neodymium transducers
Simple, quick, integrated rigging
Supported by LAPS II array design/prediction software
TRIPLE 12 INCH CARDIOID BASS ELEMENT
• Versatile integration in main arrays
• Self-contained rigging hardware
• Supported by LAPS II array design/prediction software
See page 46–47 for XLVC Rigging and Accessories.
8
MOBILE AUDIO
PORTABLE PA
INSTALL
CONCERT
LOUDSPEAKERS
XLVC
Frequency Response (-3 dB)
XLD281
XLD291
65–16,000 Hz
65–16,200 Hz
XLE181
XLE191
XCS312
65–16,000 Hz
65–16,200 Hz
45–100 Hz
Frequency Range (-10 dB)
56–16,500 Hz
56–16,700 Hz
56–16,500 Hz
56–16,700 Hz
40–100 Hz
Horizontal Coverage
120°
90°
120°
90°
200°
LF1 Power Handling1
200 W continuous, 800 W peak 200 W continuous, 800 W peak 200 W continuous, 800 W peak 200 W continuous, 800 W peak 1000 W continuous, 4000 W peak4
LF2 Power Handling2
200 W continuous, 800 W peak 200 W continuous, 800 W peak —
3
—
500 W continuous, 2000 W peak4
HF Power Handling
80 W continuous, 320 W peak
80 W continuous, 320 W peak
80 W continuous, 320 W peak
80 W continuous, 320 W peak
—
Sensitivity* LF-MB/HF
99/112 dB
99/113 dB
99/112 dB
99/113 dB
100 dB (half space)
Max. SPL* (calc., peak), LF-MB/HF 128/137 dB
128/138 dB
128/137 dB
128/138 dB
136 dB (half space)
Peak SPL @ 10m**
129 dB
130 dB
129 dB
130 dB
121 dB
LF Transducer
8-in DVN2080
8-in DVN2080
8-in DVN2080
8-in DVN2080
Three 12-in DVX3120A
LF-MB Transducer
8-in DVN2080
8-in DVN2080
—
—
—
HF Transducer
Two 2-in ND2S
Two 2-in ND2S
Two 2-in ND2S
Two 2-in ND2S
—
Connectors
2 Neutrik NL8
2 Neutrik NL8
2 Neutrik NL8
2 Neutrik NL8
2 Neutrik NL8
Enclosure Material
EVCoat–coated birch plywood
EVCoat–coated birch plywood
EVCoat–coated birch plywood
EVCoat–coated birch plywood
EVCoat–coated birch plywood
Grille
Powder-coated steel
Powder-coated steel
Powder-coated steel
Powder-coated steel
Powder-coated steel
Environmental Specs
IEC 529 IP24, MIL STD 810
IEC 529 IP24, MIL STD 810
IEC 529 IP24, MIL STD 810
IEC 529 IP24, MIL STD 810
IEC 529 IP24, MIL STD 810
Dimensions (H x W x D)
9.9 x 28.58 x 14.52 in
(251 x 726 x 369 mm)
9.9 x 28.58 x 14.52 in
(251 x 726 x 369 mm)
9.9 x 20.3 x 14.52 in
(251 x 516 x 369 mm)
9.9 x 20.3 x 14.52 in
(251 x 516 x 369 mm)
20 x 28.58 x 26.65 in
(508 x 726 x 677 mm)
Net Weight
48 lb (21.8 kg)
48 lb (21.8 kg)
17.24 kg (38 lb)
38 lb (17.24 kg)
148 lb (67.13 kg)
*Single Box @ 1 Meter
**4 Box Array @ 10 Meters
1
750-1750 Hz
2
100-750 Hz
3
1500-6500 Hz
4
60-100 Hz
9
LOUDSPEAKERS
CONCERT
The Electro-Voice Xi Series offers a potent combination
of high output and ultra-linear performance in two-way
systems. Xi Series loudspeakers incorporate the acoustic
advantages of Ring-Mode Decoupling (RMD) and
feature HP Constant Directivity waveguides to secure
excellent directivity control and even coverage. To achieve
sound performance without compromise, the Xi Series is
designed for active operation, with the exception of the
INSTALL
Xi-1082
8 INCH TWO-WAY FULL-RANGE LOUDSPEAKER
PORTABLE PA
•
•
•
•
•
•
MOBILE AUDIO
Xi-1122A/85F
Ultra-compact, low profile
Wide-range reproduction, maximized intelligibility
Optimal under-balcony enclosure angles
Suited for front-of-stage and near-field use
Trapezoidal enclosure, vented for extended LF
1.25 inch DH3/2010A titaniumdiaphragm HF driver
Ultra-compact, high output
Professional touring or installation
Maximum intelligibility for voice
3 inch neodymium HF driver
Trapezoidal (15°/side) 13-ply birch enclosure
Two 3/8 inch mounting bracket inserts
Compatible with OmniMount® Series 100
EVCoat finish
Available in black or white
Mounting bracket available separately
•
•
•
•
Built-in L-Track rigging
35 mm stand mount
Integrated handles
Available in black or white
15 INCH TWO-WAY FULL-RANGE LOUDSPEAKERS
• High-SPL in limited-space applications
• Maximum intelligibility for voice
• EVX155 woofer with 4 inch voice coil
and Ring-Mode Decoupling (RMD)
• 3 inch ND6-16 neodymium HF driver
• Rotatable 60° x 40° (64F) or 90°
x 40° (94F) coverage
See page 47 for XI-1082 Rigging and Accessories.
10
•
•
•
•
•
12 INCH TWO-WAY FULL-RANGE LOUDSPEAKER
•
•
•
•
•
Xi-1152A/64F
Xi-1152A/94F
Xi-1082, which contains a passive crossover network.
Xi loudspeaker cabinets are made of 18-mm, 13-ply
birch plywood finished in a black EVCoat and protected
by a full-face, steel front grille that is backed with foam.
All systems except the Xi-1082 have integrated handles
and two L-tracks on the top and bottom. A detailed flying
manual is available.
•
•
•
•
•
•
Solid bass down to 50 Hz (-3 dB)
Trapezoidal (15°/side) 13-ply birch enclosure
Built-in L-Track rigging
35 mm stand mount
Integrated handles
Available in black or white
Xi-1082
Xi-1122A/85F
Xi-1152A/64F
Xi-1152A/94F
Frequency Response (-3 dB)
50–20,000 Hz (-10 dB)
58–17,000 Hz
50–16,000 Hz
50–16,000 Hz
Recommended High-Pass Frequency
60–80 Hz (12 dB/octave)
Dx46 preset
Dx46 preset
Dx46 preset
Axial Sensitivity (SPL, 1 W @ 1 m)
90 dB (LF/HF)
99/110 dB (LF/HF)
98/113 dB (LF/HF)
98/112 dB (LF/HF)
Max. SPL @ 1 m (calc.), full space
118 dB (LF/HF)
130/135 dB (LF/HF)
132/138 dB (LF/HF)
132/137 dB (LF/HF)
Long-Term Power Handling
175 W (LF/HF)
300/75 W (LF/HF)
600/75 W (LF/HF)
600/75 W (LF/HF)
Short-Term Power Handling (peak)
700 W (LF/HF)
1200/300 W (LF/HF)
2400/300 W (LF/HF)
2400/300 W (LF/HF)
Coverage (nominal -6 dB) H° x V°
90° x 40° (Const. Dir. waveguide)
80° x 55° (Const. Dir. waveguide)
60° x 40° (Const. Dir. waveguide)
90° x 40° (Const. Dir. waveguide)
Directivity Index
11.2 dB (+1.8/-2.7 dB)
2,000–20,000 Hz
10.9 dB (+1.2/-2.9 dB)
1,200–16,000 Hz
13.4 dB (+1.3/-2.3 dB)
1,200–16,000 Hz
12.3 dB (+0.7/-1.5 dB)
1,200–16,000 Hz
LF woofer (transducer)
8 in
12 in DL-type
15 in EVX155
15 in EVX155
MB woofer (transducer)
—
—
—
—
HF driver (transducer)
1.25 in DH3/2010A
3 in ND6-16
3 in ND6-16
3 in ND6-16
Crossover Frequencies
3,500 Hz (passive)
Dx46 preset
Dx46 preset
Dx46 preset
Nominal Impedance
8 Ω (LF/HF)
8 Ω/16 Ω (LF/HF)
8 Ω/16 Ω (LF/HF)
8 Ω/16 Ω (LF/HF)
Minimum Impedance
5.8 Ω (LF/HF)
8.5 Ω/13.4 Ω (LF/HF)
6.3 Ω/14.0 Ω (LF/HF)
6.3 Ω/12.2 Ω (LF/HF)
Input Connections
Barrier strip
2 four-pin Speakon
2 four-pin Speakon
2 four-pin Speakon
Dimensions (H x W at front x D)
9.25 x 11.21 x 11.22 in
(235 x 488 x 285 mm)
22.99 x 14.76 x 14.01 in
(584 x 375 x 356 mm)
29.88 x 17.72 x 16.26 in
(759 x 450 x 413 mm)
29.88 x 17.72 x 16.26 in
(759 x 450 x 413 mm)
Net Weight
29.3 lb (13.3 kg)
69 lb (31.3 kg)
89.9 lb (40.8 kg)
89.9 lb (40.8 kg)
MOBILE AUDIO
PORTABLE PA
INSTALL
CONCERT
LOUDSPEAKERS
Xi Series
11
LOUDSPEAKERS
CONCERT
INSTALL
EVF is the most comprehensive standard line of frontloaded loudspeaker systems ever offered for installed
sound. Available in 12 inch or 15 inch two-way
configurations and enhanced with dedicated lowfrequency systems, EVF loudspeakers match exceptional
audio performance, efficiency, ease-of-use, and aesthetics
with unprecedented value. EVF systems incorporate the latest
Electro-Voice components to ensure years of reliability and
exceptional sound. "S" designated systems are equipped
with SMX series symmetric drive woofers and ND2B
2 inch titanium compression drivers; upgraded "D"
high definition systems are equipped with our highest
performance DVX series symmetric drive woofers and the
DH7N 3 inch pure titanium compression driver.
EVF two-way full-range systems are offered in seven
coverage patterns that provide solutions for the widest
possible range of installation challenges. The 12 inch
Constant Directivity waveguides can be rotated to work
with a vertical or horizontal orientation. Biamp operation
is supported, but the sophisticated fourth-order crossover
and protection network makes cost-saving, passive
operation extremely attractive. Using optional rigging
accessories, you can create attractive clusters that include
EVF full-range systems, as well as EVF subwoofers or EVH
full-range systems. Cabinets are available in three finishes:
EVCoat (interior use), PI (indirect weather exposure), or
FG (fiberglass—for direct weather exposure); they include
twenty-two M10 threaded suspension points.
PORTABLE PA
EVF "S" STANDARD SERIES
EVF-1122S
12 INCH TWO-WAY FULL-RANGE LOUDSPEAKERS
MOBILE AUDIO
• 2 inch ND2B titanium HF compression driver
• Rotatable Constant Directivity waveguide
• Six available patterns with
coverage from 60º to 120º
• 98 dB sensitivity, 131 dB maximum SPL
EVF-1152S
15 INCH TWO-WAY FULL-RANGE LOUDSPEAKERS
• 2 inch ND2B titanium HF compression driver
• Rotatable Constant Directivity waveguide
• Six available patterns with
coverage from 40º to 90º
• 101 dB sensitivity, 134 dB maximum SPL
See page 48–49 for EVF Rigging and Accessories.
12
• Power handling: 500 W continuous, 2000 W peak
• Fourth-order passive crossover with HF protection
• Trapezoidal 13-ply birch enclosure in
three finishes: EVCoat, PI, and FG
• Four M10 metric eyebolts included
• Power handling: 500 W continuous, 2000 W peak
• Fourth-order crossover with HF protection
• Trapezoidal 13-ply birch enclosure in
three finishes: EVCoat, PI, and FG
• Four M10 metric eyebolts included
EVF Front-Loaded Systems
EVF STANDARD 12 INCH TWO-WAY SYSTEMS
EVF-1122S/66
EVF-1122S/94
EVF-1122S/96
58–16,000 Hz1,2
Frequency Range (-10 dB)
49–19,000 Hz1,2
Recommended High-Pass Frequency
65 Hz
Sensitivity (SPL, 1 W/1 m)
98 dB
Max. SPL @ 1 m (calc.)
EVF-1122S/126
131 dB
System Power Handling (Continuous3, Program, Peak)
500 W, 1000 W, 2000 W
Nominal Impedance (Passive)
8Ω
Minimum Impedance
6Ω
Input Connections
Euroblock; PI and FG versions include dual-gland-nut input-panel cover
60° x 40°
60° x 60°
90° x 40°
90° x 60°
LF Transducer
SMX2121 12 in (305 mm) driver
HF Transducer
ND2B 2 in (51 mm) diaphragm compression driver
120° x 60°
1,450 Hz
Enclosure Material
CONCERT
Internal Passive Crossover Frequency
90° x 90°
13-ply weather-resistant birch
Standard versions: 16 ga Galvanneal, Powdercoat with screen behind
PI and FG versions: 18 ga Stainless, Powdercoat with hydrophobic cloth behind
Grille
Standard versions: IEC 60529 IP44
PI and FG versions: IEC 60529 IP55
Environmental
Suspension
22 M10 threaded suspension points (one EBK-M10-EVI kit of four forged eyebolts included)
Dimensions (H x W x D)
30.26 x 16 x 16.27 in (768.6 x 406.3 x 413.3 mm)
Net Weight
INSTALL
Coverage (Nominal -6 dB) H° x V°
EVF-1122S/99
LOUDSPEAKERS
EVF-1122S/64
Frequency Response (-3 dB)
63.1 lb (28.6 kg)
1
PORTABLE PA
Half-space measurement in passive mode
2
FG (full outdoors) versions have no enclosure vents, somewhat reducing their low frequency response
3
EIA RS-426A (eight hours)
EVF STANDARD 15 INCH TWO-WAY SYSTEMS
EVF-1152S/64
EVF-1152S/66
EVF-1152S/94
70–14,000 Hz1,2
Frequency Range (-10 dB)
41–18,000 Hz1,2
Recommended High-Pass Frequency
45 Hz
Sensitivity (SPL, 1 W/1 m)
101 dB
Max. SPL @ 1 m (calc.)
500 W, 1000 W, 2000 W
Nominal Impedance (Passive)
8Ω
Minimum Impedance
6Ω
Input Connections
Euroblock; PI and FG versions include dual-gland-nut input-panel cover
40° x 30°
60° x 40°
60° x 60°
90° x 40°
LF Transducer
SMX2151 15 in (381 mm) driver
HF Transducer
ND2B 2 in (51 mm) diaphragm compression driver
Internal Passive Crossover Frequency
90° x 90°
13-ply weather-resistant birch
Standard versions: 16 ga Galvanneal, Powdercoat with screen behind
PI and FG versions: 18 ga Stainless, Powdercoat with hydrophobic cloth behind
Standard versions: IEC 60529 IP44
PI and FG versions: IEC 60529 IP55
Environmental
Suspension
90° x 60°
1,450 Hz
Enclosure Material
Grille
EVF-1152S/99
134 dB
System Power Handling (Continuous3, Program, Peak)
Coverage (Nominal -6 dB) H° x V°
EVF-1152S/96
MOBILE AUDIO
EVF-1152S/43
Frequency Response (-3 dB)
22 M10 threaded suspension points (one EBK-M10-EVI kit of four forged eyebolts included)
Dimensions (H x W x D)
Net Weight
30.26 x 18.5 x 18.37 in (768.6 x 469.8 x 466.6 mm)
70.9 lb (32.1 kg)
1
Half-space measurement in passive mode
2
FG (full outdoors) versions have no enclosure vents, somewhat reducing their low frequency response
3
EIA RS-426A (eight hours)
13
LOUDSPEAKERS
EVF "D" HIGH DEFINITION SERIES
CONCERT
EVF "D" high definition systems are equipped with our
highest performance DVX series symmetric drive woofers
and the DH7N 3 inch pure titanium compression driver.
INSTALL
EVF-1122D
The result is lower distortion, cleaner sound reproduction at
a given output level, compared with the equivalent
"S" version.
HIGH DEFINITION 12 INCH TWO-WAY FULL-RANGE LOUDSPEAKERS
PORTABLE PA
• 3 inch DH7N titanium/neodymium
HF compression driver
• Rotatable Constant Directivity waveguide
• Six available patterns with
coverage from 60º to 120º
• 97 dB sensitivity, 131 dB maximum SPL
• Power handling: 600 W
MOBILE AUDIO
EVF-1152D
HIGH DEFINITION 15 INCH TWO-WAY FULL-RANGE LOUDSPEAKERS
•
•
•
•
•
Compact and lightweight
Low distortion, high efficiency
Ideal for fixed installations
DVX3151A woofer with fully symmetric drive
3 inch DH7N titanium/neodymium
HF compression driver
• Rotatable Constant Directivity waveguide
• Six available patterns with
coverage from 40º to 90º
See page 48–49 for EVF Rigging and Accessories.
14
continuous, 2400 W peak
• Fourth-order passive crossover with HF protection
• Trapezoidal 13-ply birch enclosure in
three finishes: EVCoat, PI, and FG
• 22 M10 threaded suspension points
• Transformer kit available for distributed systems
• Four M10 metric eyebolts included
• 100 dB sensitivity, 134 dB maximum SPL
• Power handling: 600 W
continuous, 2400 W peak
• Fourth-order crossover with HF protection
• Trapezoidal 13-ply birch enclosure in
three finishes: EVCoat, PI, and FG
• 22 M10 threaded suspension points
• Transformer kit available for distributed systems
• Four M10 metric eyebolts included
EVF Front-Loaded Systems
EVF HIGH DEFINITION 12 INCH TWO-WAY SYSTEMS
EVF-1122D/64
EVF-1122D/66
EVF-1122D/94
EVF-1122D/96
EVF-1122D/99
EVF-1122D/126
Frequency Response (-3 dB)
57–18,000 Hz
Frequency Range (-10 dB)
49–21,000 Hz1,2
Recommended High-Pass Frequency
65 Hz
Sensitivity 1 W/1 m
97 dB
Max. SPL/1 m (Calculated)1
LOUDSPEAKERS
1,2
131 dB
3
System Power Handling (Continuous , Program, Peak)
600 W, 1200 W, 2400 W
Nominal Impedance (Passive)
8Ω
Minimum Impedance
6Ω
60° x 40°
60° x 60°
90° x 40°
90° x 60°
LF Transducer
DVX3121A 12 in (305 mm) woofer
HF Transducer
DH7N 3 in (76 mm) diaphragm compression driver
Internal Passive Crossover Frequency
90° x 90°
120° x 60°
1,300 Hz
13-ply weather-resistant birch
INSTALL
Enclosure Material
Standard versions: 16 ga Galvanneal, Powdercoat with screen behind
PI and FG versions: 18 ga Stainless, Powdercoat with hydrophobic cloth behind
Grille
Standard versions: IEC 60529 IP44
PI and FG versions: IEC 60529 IP55
Environmental
Suspension
22 M10 threaded suspension points (one EBK-M10-EVI kit of four forged eyebolts included)
Dimensions (H x W x D)
30.26 x 16.00 x 16.27 in (768.6 x 406.3 x 413.3 mm)
Net Weight
PORTABLE PA
Coverage (Nominal -6 dB) H° x V°
Euroblock; PI and FG versions include dual-gland-nut input-panel cover
CONCERT
Input Connections
65.5 lb (29.7 kg)
1
Half-space measurement in passive mode
FG (full outdoors) versions have no enclosure vents, somewhat reducing their low frequency response
3
EIA RS-426A (eight hours)
2
EVF-1152D/43
EVF-1152D/64
EVF-1152D/66
EVF-1152D/94
70–18,000 Hz
Frequency Range (-10 dB)
40–21,000 Hz1,2
Recommended High-Pass Frequency
45 Hz
Sensitivity 1 W/1 m
100 dB
Max. SPL/1 m (Calculated)1
134 dB
System Power Handling (Continuous3, Program, Peak)
600 W, 1200 W, 2400 W
Nominal Impedance (Passive)
8Ω
Minimum Impedance
6Ω
Input Connections
Euroblock; PI and FG versions include dual-gland-nut input-panel cover
40° x 30°
60° x 40°
60° x 60°
90° x 40°
LF Transducer
DVX3151A 15 in (381 mm) woofer
HF Transducer
DH7N 3 in (76 mm) diaphragm compression driver
Internal Passive Crossover Frequency
90° x 90°
13-ply weather-resistant birch
Standard versions: 16 ga Galvanneal, Powdercoat with screen behind
PI and FG versions: 18 ga Stainless, Powdercoat with hydrophobic cloth behind
Standard versions: IEC 60529 IP44
PI and FG versions: IEC 60529 IP55
Environmental
Suspension
90° x 60°
1,300 Hz
Enclosure Material
Grille
EVF-1152D/99
1,2
Frequency Response (-3 dB)
Coverage (Nominal -6 dB) H° x V°
EVF-1152D/96
MOBILE AUDIO
EVF HIGH DEFINITION 15 INCH TWO-WAY SYSTEMS
22 M10 threaded suspension points (one EBK-M10-EVI kit of four forged eyebolts included)
Dimensions (H x W x D)
Net Weight
30.26 x 18.5 x 18.37 in (768.6 x 469.8 x 466.6 mm)
75.7 lb (34.4 kg)
1
Half-space measurement in passive mode
2
FG (full outdoors) versions have no enclosure vents, somewhat reducing their low frequency response
3
EIA RS-426A (eight hours)
15
LOUDSPEAKERS
A range of acoustically and aesthetically matched front-loaded low-frequency systems are available to compliment
your full-range systems. Cabinet heights are the same as those of EVF and EVH full-range loudspeakers systems, so
you can create functional, attractive clusters using these low-frequency boxes with almost any combination of EVF
and EVH loudspeakers.
CONCERT
EVF-1121S
12 INCH FRONT-LOADED BASS ELEMENT
INSTALL
•
•
•
•
•
PORTABLE PA
EVF-1151S
MOBILE AUDIO
• EVCoat, PI, or FG finish
• 22 M10 threaded suspension points
• Four M10 metric eyebolts included
Ideal for installations
Low-distortion EVS18SB woofer
99 dB sensitivity, 131 dB maximum SPL
Power: 400 W continuous, 1600 W peak
Trapezoidal 13-ply birch enclosure
• EVCoat, PI, or FG finish
• 28 M10 threaded suspension points
• Four M10 metric eyebolts included
DUAL 12 INCH FRONT-LOADED SUBWOOFER
•
•
•
•
•
16
Enhanced bass for installations
Low-distortion EVS15SB woofer
99 dB sensitivity, 131 dB maximum SPL
Power: 400 W continuous, 1600 W peak
Trapezoidal 13-ply birch enclosure
18 INCH FRONT-LOADED SUBWOOFER
•
•
•
•
•
EVF-2121S
• EVCoat, PI, or FG finish
• 22 M10 threaded suspension points
• Four M10 metric eyebolts included
15 INCH FRONT-LOADED BASS ELEMENT
•
•
•
•
•
EVF-1181S
Enhanced bass for installations
Low-distortion EVS12SB woofer
99 dB sensitivity, 131 dB maximum SPL
Power: 400 W continuous, 1600 W peak
Trapezoidal 13-ply birch enclosure
Ideal for installations
Low-distortion dual EVS18SB woofer
100 dB sensitivity, 135 dB maximum SPL
Power: 800 W continuous, 3200 W peak
Trapezoidal 13-ply birch enclosure
• EVCoat, PI, or FG finish
• 22 M10 threaded suspension points
• Four M10 metric eyebolts included
EVF Front-Loaded Subwoofers
DUAL 15 INCH FRONT-LOADED SUBWOOFER
•
•
•
•
•
High power handling for installations
Two premium DVX3159A woofers
101 dB sensitivity, 137 dB maximum SPL
Power: 1000 W continuous, 4000 W peak
Trapezoidal 13-ply birch enclosure
• EVCoat, PI, or FG finish
• 28 M10 threaded suspension points
• Four M10 metric eyebolts included
LOUDSPEAKERS
EVF-2151D
EVF-1121S
EVF-1151S
1,2
EVF-2121S
1,2
1,2
EVF-1181S
1,2
EVF-2151D
40–2,600 Hz1,2
Frequency Response (-3 dB)
70–98 Hz
67–95 Hz
54–145 Hz
35–100 Hz
Frequency Range (-10 dB)
48–120 Hz1,2
46–124 Hz1,2
41–330 Hz1,2
28–650 Hz1,2
30–3,200 Hz1,2
Recommended High-Pass Frequency
50 Hz
35 Hz
45 Hz
33 Hz
35 Hz
Internal Passive Low-Pass Filter
100 Hz, 12 dB per octave
100 Hz, 12 dB per octave
None
None
None
Sensitivity (SPL, 1 W/1 m)
99 dB
99 dB
100 dB
99 dB
101 dB
Max. SPL @ 1 m (calc.)
131 dB
131 dB
135 dB
131 dB
137 dB
System Power Handling (Continuous3, Program, Peak) 400 W, 800 W, 1600 W
400 W, 800 W, 1600 W
800 W, 1600 W, 3200 W
400 W, 800 W, 1600 W
1000 W, 2000 W, 4000 W
Nominal Impedance
Passive: 4 Ω, Biamp: 8 Ω
Passive: 4 Ω, Biamp: 8 Ω
Passive: N/A, Biamp: 4 Ω
Passive: N/A, Biamp: 8 Ω
Passive: N/A, Biamp: 4 Ω
Minimum Impedance
Passive: 3.4 Ω, Biamp: 5.5 Ω
Passive: 3.4 Ω, Biamp: 6.4 Ω Passive: N/A, Biamp: 2.8 Ω
Passive: N/A, Biamp: 6 Ω
Passive: N/A, Biamp: 2.7 Ω
Input Connections
Euroblock; PI and FG versions include dual gland nut input panel cover
Coverage (Nominal -6 dB)
Transducer
MOBILE AUDIO
PORTABLE PA
INSTALL
CONCERT
See page 48–49 for EVF Sub Rigging and Accessories.
Omnidirectional in normal operating range
EVS12SB 12 in (305 mm)
driver
EVS15SB 15 in (381 mm)
driver
Enclosure Material
Two EVS12SB 12 in (305
mm) driver
EVS18SB 18 in (457 mm)
driver
Two DVX3159A 15 in (381
mm) drivers
13-ply weather-resistant birch
Standard versions: 16 ga Galvanneal, Powdercoat with screen behind
PI and FG versions: 18 ga Stainless, Powdercoat with hydrophobic cloth behind
Grille
Standard versions: IEC 60529 IP44
PI and FG versions: IEC 60529 IP55
Environmental
22 M10 threaded suspension points
(one EBK-M10-EVI kit of four forged eyebolts included)
Suspension
28 M10 threaded suspension points (one EBK-M10-EVI kit
of four forged eyebolts included)
Dimensions (H x W x D)
30.26 x 16.0 x 16.27 in
(768.6 x 406 x 413.3 mm)
30.26 x 18.5 x 18.4 in
(768.6 x 470 x 467 mm)
30.26 x 18.5 x 18.4 in
(768.6 x 470 x 467 mm)
30.26 x 26.6 x 28.6 in
(768.6 x 675.6 x 726.4 mm)
30.26 x 26.6 x 28.6 in
(768.6 x 675.6 x 726.4 mm)
Net Weight
57.7 lb (26.2 kg)
62.6 lb (28.4 kg)
82.4 lb (37.4 kg)
101.2 lb (45.9 kg)
117 lb (53.1 kg)
17
LOUDSPEAKERS
CONCERT
The EVH series is a dedicated installed sound solution
that builds on everything Electro-Voice has learned about
full-range, horn-loaded systems. Delivering exceptional
value in venues of all sizes, these mid-sized 15 inch twoway cabinets feature a unique coaxial horn-loaded design
that is unmatched for pattern control and intelligibility in
reverberant environments.
INSTALL
A 400-W SMX2151 woofer provides the EVH's deep, rich
lows, while horn loading extends directivity control below
500 Hz. High frequencies are handled by a pure titanium
compression driver—either a standard 2 inch ("S" models)
or a premium 3 inch with neodymium magnetic structure
PORTABLE PA
EVH-1152S
(high definition "D" models)—protected by an advanced
fourth-order crossover network. Six coverage patterns
(ranging from 40° x 30° to 90° x 90°) on rotatable Constant
Directivity waveguides offer extraordinary versatility.
Three finishes are available, including two for outdoor
applications. EVH loudspeakers come installation-ready
with 28 M10-threaded suspension points, making rigging
extremely flexible. Wherever extended pattern control
is a priority, the EVH series provides a proven, effective
solution.
EVH systems are mechanically compatible with the EVF subs.
TWO-WAY COAXIAL HORN-LOADED FULL-RANGE LOUDSPEAKERS
Ideal for reverberant spaces
Pattern control maintained below 500 Hz
15 inch SMX2151 woofer
2 inch ND2B titanium HF compression driver
Rotatable Constant Directivity waveguide
Six available coverage patterns
from 40º x 30º to 90º x 90º
• 106 dB sensitivity, 139 dB maximum SPL
MOBILE AUDIO
•
•
•
•
•
•
EVH-1152D
HIGH DEFINITION TWO-WAY COAXIAL HORN-LOADED FULL-RANGE LOUDSPEAKERS
•
•
•
•
Ideal for reverberant spaces
Pattern control maintained below 500 Hz
15 inch SMX2151 woofer
3 inch DH7N titanium/neodymium
HF compression driver
• Rotatable Constant Directivity waveguide
• Six available coverage patterns
from 40º x 30º to 90º x 90º
See page 48–49 for EVH Rigging and Accessories.
18
• Power handling: 500 W continuous, 2000 W peak
• Fourth-order passive crossover with HF protection
• Trapezoidal enclosure in three
finishes: EVCoat, PI, or FG
• 28 M10 threaded suspension points
• Four M10 metric eyebolts included
•
•
•
•
106 dB sensitivity, 139 dB maximum SPL
Power handling: 500 W continuous, 2000 W peak
Fourth-order passive crossover with HF protection
Trapezoidal enclosure in three
finishes: EVCoat, PI, or FG
• 28 M10 threaded suspension points
• Four M10 metric eyebolts included
EVH Horn-Loaded Systems
EVH STANDARD TWO-WAY SYSTEMS
EVH-1152S/43
EVH-1152S/64
EVH-1152S/66
EVH-1152S/94
Frequency Response (-3 dB)
60–15,000 Hz1
Frequency Range (-10 dB)
50–16,000 Hz1
EVH-1152S/99
60 Hz
Sensitivity (SPL, 1 W/1 m)
106 dB
105 dB
105 dB
105 dB
105 dB
104 dB
Max. SPL @ 1 m (calc.)
139 dB
138 dB
138 dB
138 dB
138 dB
137 dB
System Power Handling (Continuous2,
Program, Peak)
500 W, 1000 W, 2000 W
Nominal Impedance (Passive)
8Ω
Minimum Impedance
6Ω
Euroblock; PI and FG versions include dual-gland-nut input-panel cover
40° x 30°
60° x 40°
60° x 60°
90° x 40°
LF Transducer
SMX2151 15 in (381 mm) driver
HF Transducer
ND2B 2 in (51 mm) diaphragm compression driver
Internal Passive Crossover Frequency
90° x 60°
90° x 90°
CONCERT
Input Connections
1,300 Hz
Enclosure Material
13-ply weather-resistant birch
Standard versions: 16 ga Galvanneal, Powdercoat with screen behind
PI and FG versions: 18 ga Stainless, Powdercoat with hydrophobic cloth behind
Grille
Standard versions: IEC 60529 IP33
PI and FG versions: IEC 60529 IP55
Environmental
28 M10 threaded suspension points (one EBK-M10-EVI kit of four forged eyebolts included)
Dimensions (H x W x D)
INSTALL
Suspension
30.26 x 30.26 x 26.77 in (768.6 x 768.6 x 680.1 mm)
Net Weight
143 lb (64.9 kg)
PORTABLE PA
Coverage (Nominal -6 dB) H° x V°
LOUDSPEAKERS
Recommended High-Pass Frequency
EVH-1152S/96
EVH HIGH DEFINITION TWO-WAY SYSTEMS
EVH-1152D/43
EVH-1152D/64
EVH-1152D/66
EVH-1152D/94
Frequency Response (-3 dB)
60–17,000 Hz1
Frequency Range (-10 dB)
50–20,000 Hz1
EVH-1152D/99
60 Hz
Sensitivity (SPL, 1 W/1 m)
106 dB
105 dB
105 dB
105 dB
105 dB
104 dB
Max. SPL @ 1 m (calc.)
139 dB
138 dB
138 dB
138 dB
138 dB
137 dB
System Power Handling
(Continuous2, Program, Peak)
500 W, 1000 W, 2000 W
Nominal Impedance (Passive)
8Ω
Minimum Impedance
6Ω
Input Connections
Coverage (Nominal -6 dB) H° x V°
Euroblock; PI and FG versions include dual-gland-nut input-panel cover
40° x 30°
60° x 40°
60° x 60°
90° x 40°
LF Transducer
SMX2151 15 in (381 mm) driver
HF Transducer
DH7N 3 in (76 mm) diaphragm compression driver
Internal Passive Crossover Frequency
Enclosure Material
Grille
Environmental
Suspension
Dimensions (H x W x D)
Net Weight
MOBILE AUDIO
Recommended High-Pass Frequency
EVH-1152D/96
90° x 60°
90° x 90°
1,300 Hz
13-ply weather-resistant birch
Standard versions: 16 ga Galvanneal, Powdercoat with screen behind
PI and FG versions: 18 ga Stainless, Powdercoat with hydrophobic cloth behind
Standard versions: IEC 60529 IP33
PI and FG versions: IEC 60529 IP55
28 M10 threaded suspension points (one EBK-M10-EVI kit of four forged eyebolts included)
30.26 x 30.26 x 26.77 in (768.6 x 768.6 x 680.1 mm)
145.5 lb (66.1 kg)
1
Half-space measurement in passive mode
2
EIA RS-426A (eight hours)
19
LOUDSPEAKERS
CONCERT
The Expandable Vertical Array (EVA) series is a vertical line
array with a unique, elegant system design that provides
a simple solution for installed sound applications. EVA
offers true line array performance and coherent far-field
summing from the patented Hydra plane wave generator.
The internal, hidden rigging not only looks great, but also
makes EVA incredibly easy to install. The sophisticated
internal crossover lets you power up to eight EVA full-range
modules (16 line array elements) from a single amplifier
channel, eliminating the need for external crossovers
or DSP. The four full-range modules in the series are
complemented by two matching subwoofers that can be
flown in the array. If you think that your budget isn't big
enough for a great sounding line array, EVA may be just the
answer you're looking for.
INSTALL
Features:
PORTABLE PA
•
•
•
•
•
•
•
High performance, cost-effective
Ideal for fixed installation line arrays
Two array elements in each module
Two 8 inch low-distortion woofers
Four 1.25 inch titanium diaphragm HF drivers
Advanced Hydra plane wave generators
High sensitivity (104 dB) for high output
•
•
•
•
•
Super efficient: drive up to 8 boxes from a single amp channel
Sixth-order passive crossover with HF protection
Integrated hidden suspension hardware
Choice of three finishes: indoor, PI, and FG
EVADA (EVA Design Assistant) software tool
MOBILE AUDIO
EVA-2082S 1220
EVA-2082S 126
DUAL-ELEMENT
120° BY 20°
FULL-RANGE LINEARRAY MODULE
DUAL-ELEMENT
120° BY 6°
FULL-RANGE LINEARRAY MODULE
EVA-2082S 906
EVA-2082S 920
DUAL-ELEMENT
90° BY 6° FULL-RANGE
LINE-ARRAY MODULE
20
DUAL-ELEMENT
90° BY 20° FULL-RANGE
LINE-ARRAY MODULE
EVA Subwoofers
EVA SUBWOOFERS
Features:
EVA-1151D
• DVX3159A woofer for low distortion at high SPL
• Steel-reinforced 13-ply birch enclosure
LOUDSPEAKERS
• High power, front loaded
• Ideal for fixed installations
• Seamless rigging with EVA line arrays
15 INCH SUBWOOFER LINE ARRAY ELEMENT
EVA-2151D
• Integrated hidden suspension hardware
• Splays of 0° or 5° between modules
• Choice of three finishes: EVCoat, PI, and FG
CONCERT
DVX3159A woofer for low distortion at high SPL
98 dB sensitivity (1 W/1 m half space)
Power handling: 500 W continuous, 2000 W peak
125/131 dB maximum SPL (continuous/peak)
INSTALL
•
•
•
•
DUAL 15 INCH SUBWOOFER LINE ARRAY ELEMENT
• 130/136 dB maximum SPL (continuous/peak)
• Choice of two finishes: EVCoat and PI
(EVA-2151D not available in FG version)
PORTABLE PA
• Two DVX3159A woofers for low
distortion at high SPL
• 100 dB sensitivity (1 W/1 m half space)
• Power handling: 1000 W continuous, 4000 W peak
EVA-2082S 1220
EVA-2082S 126
Frequency Response
(-3 dB)
EVA-2082S 906
EVA-2082S 920
EVA-1151D
MOBILE AUDIO
See page 48–49 for EVA Rigging and Accessories.
EVA-2151D
60–19000 Hz
48–250 Hz (half space)
38–200 Hz (half space)
Recommended High-Pass
Frequency
50 Hz
35 Hz, 24 dB per Octave
BW
32 Hz, 24 dB per Octave
BW (half space)
Sensitivity (SPL, 1 W/1 m)
104 dB (3 module array)
98 dB, Arithmetic average,
55–100 Hz (half space)
100 dB, Anithmetic average,
55–100 Hz (half space)
131 dB (half space)
130/133/136 dB (half
space)
500 W, 1000 W, 2000 W
1000 W, 2000 W, 4000 W
8Ω
4Ω
Max. SPL @ 1 m (calc.)
135 dB
System Power Handling
(Continuous, Program, Peak)
350, 700, 1400 W
Nominal Impedance
(Passive)
16 Ω
Input Connections
Euroblock
Frequency Range (-10 dB)
35–250 Hz (half space)
28–200 Hz (half space)
Coverage
(Nominal -6 dB) H°
120°
120°
45–20,000 Hz
90°
90°
Omnidirectional
Omnidirectional
Coverage
(Nominal -6 dB) V°
20°
6°
6°
20°
Omnidirectional
Omnidirectional
DVX3159A
Two DVX3159A
LF Transducer
Two EVS2008 8 in (203 mm) driver
HF Transducer
Four 1.25 in (32 mm) DH2005 diaphragm compression driver
Crossover Frequency
1,740 Hz
Minimum Impedance
12 Ω
Enclosure Material
None
None
100 Hz active
100 Hz active
5.8 Ω
2.8 Ω
Birch plywood
Grille
16 ga Galvanneal, powder-coated; PI Version: stainless steel with hydrophobic cloth
Suspension
EVA grid (sold separately)
Dimensions (H x W x D)
20.17 x 23.5 x 14.53 in
20.25 x 23.5 x 14.1 in
20.25 x 23.5 x 14.1 in
20.17 x 23.5 x 14.53 in
23.5 x 23.5 x 18.16 in
30.5 x 23.42 x 31.2 in
(512.2 x 596.9 x 369.1 mm) (514.4 x 596.9 x 358.2 mm) (514.4 x 596.9 x 358.2 mm) (512.2 x 596.9 x 369.1 mm) (596.9 x 596.9 x 461.3 mm) (930.4 x 597 x 792.5 mm)
Net Weight
81.0 lb (36.8 kg)
81.8 lb (37.1 kg)
81.8 lb (37.1 kg)
81.0 lb (36.8 kg)
89.1 lb (40.4 kg)
178 lb (80.8 kg)
21
LOUDSPEAKERS
CONCERT
Bringing ultracompact design to the EV Innovation family
of installation loudspeakers, the EVU series shines in
applications including delay, under-balcony fill, front-fill,
wall mounting, and distributed audio. EVU loudspeakers
feature a rotatable Constant Directivity waveguide that
provides truly uniform sound dispersion while allowing the
horizontal coverage pattern to be independent of enclosure
orientation. Sonically matched to complement the other
EV Innovation products, EVU helps make EV Innovation
the industry's most comprehensive and versatile line of
installed-sound loudspeakers.
A fourth-order, 90 Hz high-pass filter is recommended for
use with all EVU loudspeakers.
INSTALL
Features:
PORTABLE PA
•
•
•
•
•
Sonically matched to all EV-Innovation lines
Sophisticated 18-dB-octave passive crossover/EQ networks
Asymmetrical enclosure for ideal under-balcony and stage-lip aiming
Optional NL4-type connector panel
One 1.3 inch (33 mm) diaphragm compression driver
EVU-1062/95
MOBILE AUDIO
Ultracompact 8 x 14.5 inch enclosure
90° x 50° rotatable Constant Directivity waveguide
Ultra-high power handling for size: 160 W continuous
120 dB maximum SPL
Asymmetrical trapezoidal enclosure design
Compatible with OmniMount™
ULTRACOMPACT TWO-WAY WITH DUAL 6.5 INCH WOOFERS
UL
•
•
•
•
•
•
22
U-bracket included
Optional 70 V and 100 V operation
OmniMount®-compatible rear mounting points
Available in black or white (interior use)
ULTRACOMPACT TWO-WAY WITH SINGLE 6.5 INCH WOOFER
•
•
•
•
•
•
EVU-2062/95
•
•
•
•
Ultracompact 8 x 21 inch enclosure
90° x 50° rotatable Constant Directivity waveguide
Ultra-high power handling for size: 300 W continuous
125 dB maximum SPL
Asymmetrical trapezoidal enclosure design
Compatible with OmniMount™
EVU Ultracompact Systems
EVU-1082/95
EV
VU-10
1082
82/9
/95
95
ULTRACOMPACT TWO-WAY WITH SINGLE 8 INCH WOOFER
EVU-2082/95
EV
VU-20
2082
82/9
82
/95
5
Ultracompact 10 x 16 inch enclosure
90° x 50° rotatable Constant Directivity waveguide
Ultra-high power handling for size: 175 W continuous
123 dB maximum SPL
Asymmetrical trapezoidal enclosure design
Compatible with OmniMount™
LOUDSPEAKERS
•
•
•
•
•
•
ULTRACOMPACT TWO-WAY WITH DUAL 8 INCH WOOFERS
UL
CONCERT
Ultracompact 10 x 24 inch enclosure
90° x 50° rotatable Constant Directivity waveguide
Ultra-high power handling for size: 350 W continuous
126 dB maximum SPL
Asymmetrical trapezoidal enclosure design
Compatible with OmniMount™
INSTALL
•
•
•
•
•
•
EVU-1062/95
EVU-2062/95
EVU-1082/95
EVU-2082/95
110–16,000 Hz1
100–16,000 Hz1
110–16,000 Hz1
100–16,000 Hz1
Frequency Response (−10 dB)
65–20,000 Hz1
70–20,000 Hz1
65–20,000 Hz1
60–20,000 Hz1
Recommended High-Pass Frequency
90 Hz
90 Hz
90 Hz
90 Hz
Axial Sensitivity (1 W/1 m)
92 dB
94 dB
95 dB
95 dB
Maximum SPL (calc.) Continuous, Peak
114, 120 dB
119, 125 dB
117, 123 dB
120, 126 dB
Waveguide
6 x 6 in, rotatable
6 x 6 in, rotatable
6 x 6 in, rotatable
6 x 6 in, rotatable
Horizontal Coverage
90°
90°
90°
90°
Vertical Coverage
50°
50°
50°
50°
Power Handling (Continuous, Peak)
160, 640 W2
300, 1200 W2
175, 700 W2
LF Transducer
6.5 in (165 mm) ICT-6.5-8 woofer
Two 6.5 in (165 mm) ICT-6.5-8 woofers 8 in (203 mm) ICT-8-8 woofer
Two 8 in (203 mm) ICT-8-8 woofers
HF Transducer
1.3 in (33 mm) diaphragm ICT-1-8
compression driver
1.3 in (33 mm) diaphragm ICT-1-8
compression driver
1.3 in (33 mm) diaphragm ICT-1-8
compression driver
Nominal Impedance
8Ω
8Ω
8Ω
8Ω
Minimum Impedance
6Ω
6Ω
6Ω
6Ω
1.3 in (33 mm) diaphragm ICT-1-8
compression driver
MOBILE AUDIO
Frequency Response (−3 dB)
PORTABLE PA
See page 49 for EVU Rigging and Accessories.
350, 1400 W2
Connectors
4-pin Euroblock (up to 10 AWG wire)
4-pin Euroblock (up to 10 AWG wire)
4-pin Euroblock (up to 10 AWG wire)
4-pin Euroblock (up to 10 AWG wire)
Enclosure Material
9-ply hardwood plywood
9-ply hardwood plywood
9-ply hardwood plywood
9-ply hardwood plywood
Minimum Impedance
Textured paint
Textured paint
Textured paint
Textured paint
Color
Black or white
Black or white
Black or white
Black or white
Grille, Standard Versions
18 ga steel with cloth behind
18 ga steel with cloth behind
18 ga steel with cloth behind
18 ga steel with cloth behind
Suspension
Six M8 threaded points
Six M8 threaded points
Six M8 threaded points
Six M8 threaded points
Dimensions (H x W x D)
8.21 in x 14.6 in x 8.14 in
(209 mm x 370 mm x 207 mm)
8.21 in x 21.0 in x 8.14 in
(209 mm x 533 mm x 207 mm)
9.73 in x 16.1 in x 9.34 in
(247 mm x 409 mm x 237 mm)
9.73 in x 24.2 in x 9.34 in
(247 mm x 615 mm x 237 mm)
Net Weight
14.4 lb (6.53 kg)
25.0 lb (11.3 kg)
16.3 lb (7.40 kg)
28.3 lb (12.8 kg)
1
Half-space measurement
2
EIA RS-426A (eight hours)
23
LOUDSPEAKERS
CONCERT
EVI provides a simple, economical solution for permanent
installations requiring even coverage over a fixed
rectangular area. In a typical room, the distance from
a front-mounted loudspeaker to the last row is two
or more times the distance to the front row, resulting
in a substantial front-to-back difference in level and
INSTALL
EVI-12
12 INCH TWO-WAY VARIABLE INTENSITY LOUDSPEAKER
PORTABLE PA
•
•
•
•
•
MOBILE AUDIO
EVI-15
Variable Intensity horn for even coverage
Two-way, full-range loudspeaker
High sensitivity
Vented LF enclosure
1.25 inch HF driver with titanium diaphragm
Variable Intensity horn for even coverage
Two-way, full-range loudspeaker
High sensitivity
Vented LF enclosure
1.25 inch HF driver with titanium diaphragm
• PRO™ Driver protection circuit
• Multi-angled housing
• Five 3/8 inch hanging points
DUAL EIGHT INCH TWO-WAY VARIABLE INTENSITY LOUDSPEAKER
•
•
•
•
•
•
Ideal for reverberant spaces
Variable Intensity horn for even coverage
Two-way, full-range loudspeaker
Vented LF enclosure
1.25 inch HF driver with titanium diaphragm
PRO™ Driver protection circuit
See page 49 for EVI Rigging and Accessories.
24
• PRO™ Driver protection circuit
• Multi-angled housing
• Five 3/8 inch hanging points
15 INCH TWO-WAY VARIABLE INTENSITY LOUDSPEAKER
•
•
•
•
•
EVI-28
intelligibility. The Variable Intensity horn counters this
problem by increasing the sound sent to the back of the
room by six to eight dB, balancing SPL distribution without
the expense and complexity of additional systems or
components.
• Multi-angled housing
• Stacked, frequency-shaded woofers for
pattern control down to 500 Hz
• Three 3/8 inch hanging points
EVI Variable Intensity Loudspeaker Systems
EVI VARIABLE INTENSITY COVERAGE PATTERN (3-2-1 RULE):
CONCERT
LOUDSPEAKERS
If speaker mount-height = H, then coverage length = 3H, coverage width = 2H, and first row coverage = 1H
INSTALL
H
H
W
=
2H
th =
Leng
3H
PORTABLE PA
h
EVI-12
EVI-15
EVI-28
Frequency Response (-10 dB)
50–20,000 Hz
50–20,000 Hz
60–20,000 Hz
Sensitivity (SPL 1 W/1 m)
99 dB
100 dB
93 dB
Max. SPL/1m (calc.)
129 dB
130 dB
123 dB
Power Handling (Continuous, Peak) 250 W, 1000 W
250 W, 1000 W
250 W, 1000 W
Coverage, H x V
60° x 70° long throw, 110° x 90° short throw
65° x 65° long throw, 110° x 65° short throw
65° x 65° long throw, 110° x 65° short throw
LF Transducer
12 in
15 in
Two 8 in
HF Transducer
1.25 in DH3/2010A compression driver (1 in exit)
1.25 in DH3/2010A compression driver (1 in exit)
1.25 in DH3/2010A compression driver (1 in exit)
Crossover frequency
2,000 Hz
2,000 Hz
2,000 Hz
Nominal impedance (minimum)
8Ω
8Ω
8Ω
Input connections
Screw terminal
Screw terminal
Screw terminal
Dimensions (H x W at front x D)
21.8 x 14 x 27.5 in (554 x 356 x 699 mm)
23 x 16.9 x 30.2 in (584 x 429 x 766 mm)
13.9 x 19.5 x 20.6 in (353 x 496 x 523 mm)
Net Weight
48 lb (21.8 kg)
53 lb (24.0 kg)
36 lb (16.3 kg)
MOBILE AUDIO
idt
25
LOUDSPEAKERS
EVID SURFACE-MOUNT SYSTEMS
CONCERT
EVID premium commercial loudspeakers bring bestin-class sonic characteristics and stunning high fidelity
to a broad range of installation applications, including
performance and sports venues, retail environments,
conference and meeting rooms, and hospitality settings,
such as restaurants and bars. Available in both flush-mount
INSTALL
EVID 3.2
and surface-mount configurations, EVID loudspeakers
feature innovative designs that beautify not only the sound
of a room but also its looks. EVID 3.2, 4.2, and 6.2 models
are available in "T"-designated versions with internal 70 or
100 V line transformer. High power and high performance,
EVID is the superior solution to today's installation needs.
DUAL 3.5 INCH TWO-WAY SURFACE-MOUNT LOUDSPEAKER
Ultra-compact full range
Ideal for restaurants, bars, patios, and retail
Vented LF enclosure
0.75 inch titanium diaphragm HF driver
with neodymium magnetic structure
• Full-bandwidth overload protection (LF and HF)
PORTABLE PA
•
•
•
•
EVID 4.2
•
•
•
•
•
DUAL 4 INCH TWO-WAY SURFACE-MOUNT LOUDSPEAKER
MOBILE AUDIO
•
•
•
•
Compact full range
Ideal for restaurants, bars, patios, and retail
Vented LF enclosure
1 inch titanium diaphragm HF driver with
neodymium magnetic structure
• Coherent Coverage Waveguide
EVID 6.2
Elliptical weather-resistant ABS enclosure
Paintable black or white finish
Magnetically shielded for video applications
Strong-Arm Mount for easy, flexible aiming
"T" version for 70 or 100 V distributed systems
•
•
•
•
•
•
Full-bandwidth overload protection (LF and HF)
Elliptical weather-resistant ABS enclosure
Paintable black or white finish
Magnetically shielded for video applications
Strong-Arm Mount for easy, flexible aiming
"T" version for 70 or 100 V distributed systems
DUAL 6 INCH TWO-WAY SURFACE-MOUNT LOUDSPEAKER
•
•
•
•
Compact full range
Ideal for shopping malls, sports bars, and health clubs
Vented LF enclosure
1 inch titanium diaphragm HF driver with
neodymium magnetic structure
• Coherent Coverage Waveguide
EVID 3.2, EVID 4.2, AND EVID 6.2
•
•
•
•
•
•
Full-bandwidth overload protection (LF and HF)
Elliptical weather-resistant ABS enclosure
Paintable black or white finish
Magnetically shielded for video applications
Strong-Arm Mount for easy, flexible aiming
"T" version for 70 or 100 V distributed systems
Angle markers
INCLUDED
EV's Strong-Arm Mount (SAM) comes with each
EVID system and includes a hex-key-tool. SAM
has angle markers to make installation easier.
26
100°
90°
EVID In-Wall Speaker Systems
12 INCH CORNER-MOUNT, DUAL VOICE COIL SUBWOOFER
• Supplemental bass for indoor systems
• Ideal for sports bars, dance floors,
retail, and health clubs
• High-excursion woofer with dual voice
coil to accommodate L/R channels
• High sensitivity, high power-handling
• Crossed-over pass-thru for up to
four satellite speakers
• Trapezoidal shape for flexible placement
and optimal bass loading
• Steel-reinforced cabinet with
mounting hardware included
• Paintable black or white finish
• One 3/8 inch 16-thread forged steel eyebolt is
included. A second is necessary for hanging.
• The mounting bracket passes
EIA 636 at a safety factor of
8:1 and included for onwall or corner mounting.
LOUDSPEAKERS
EVID 12.1
4 INCH TWO-WAY FLUSH-MOUNT LOUDSPEAKER
EVID FM 6.2
INSTALL
• Fully-sealed enclosure provides superior
isolation to protect adjacent rooms
• Secure Phoenix-style pass-through
connectors for easy wiring and installation
• Four point “quick mounting” tabs for
fast attachment in any wall cavity
• Can-mounted transformer for enhanced rigidity
• Ribbed back can eliminates flexing
PORTABLE PA
• Shallow profile, ideal for tight wall or ceiling spaces
• Tuned passive radiator extends
bass, enhances performance
• High quality 1 inch titanium dome tweeter
• Full-bandwidth overload protection
• 70 V, 100 V, and 8 Ω operation in the same
model for off-the-shelf versatility
• Front-panel mode/wattage switch
6 INCH TWO-WAY FLUSH-MOUNT LOUDSPEAKER
• Shallow profile, ideal for tight wall or ceiling spaces
• Tuned passive radiator extends
bass, enhances performance
• High quality 1 inch titanium dome tweeter
• Full-bandwidth overload protection
• 70 V, 100 V, and 8 Ω operation in the same
model for off-the-shelf versatility
• Front-panel mode/wattage selector
• Fully-sealed enclosure provides superior
isolation to protect adjacent rooms
• Secure Phoenix-style pass-through connectors
for easy wiring and installation.
• Four point “quick mounting” tabs for
fast attachment in any wall cavity
• Can-mounted transformer for enhanced rigidity
• Ribbed back can eliminates flexing
MOBILE AUDIO
EVID FM 4.2
CONCERT
EVID IN-WALL SPEAKER SYSTEMS
See page 49 for EVID Rigging and Accessories.
EVID 3.2
EVID 4.2
EVID 6.2
EVID 12.1
EVID FM 4.2
EVID FM 6.2
Frequency Range (-10 dB)
85–20,000 Hz
65–20,000 Hz
62–20,000 Hz
40–140 Hz
52–20,000 Hz
52–20,000 Hz
Sensitivity (SPL, 1 W/1 m)
87 dB
89 dB
94 dB
100 dB (1/4 space)
87 dB
90 dB
Max. SPL/1m (calc.)
112 dB
115 dB
122 dB
128 dB (1/4 space)
110 dB
115 dB
Power Handling (Continuous, Peak)
75 W, 300 W
100 W, 400 W
150 W, 600 W
175 W, 700 W (per coil)
50 W, 200 W
75 W, 300 W
Transformer taps
(transformer version only)
70 V: 5 W
100 V: 10 W
70 V: 3.75 W
70 V: 7.5 W
70 V/100 V: 7.5, 15, 30 W 70 V/100 V:15, 30, 60 W
—
70 V: 1.75, 3.75, 7.5, 15,
30 W
70 V: 7.5, 15, 30, 60 W
Coverage, H x V
140° x 100°
120° x 80°
100° x 80°
—
150° x 150°
120° x 120°
LF Transducer
Two 3.5 in
Two 4 in
Two 6 in
12 in
4 in, plus 4 in passive
radiator
6 in, plus 6 in passive
radiator
HF Transducer
0.75 in
1 in
1 in
—
1 in (titanium dome)
1 in (titanium dome)
Nominal impedance
(non-transformer version)
8Ω
8Ω
8Ω
8Ω
8Ω
8Ω
Minimum impedance
(non-transformer version)
6Ω
6Ω
6Ω
6Ω
—
—
Input connections
Spring terminal
Spring terminal
Spring terminal
Spring terminal
4-pin Phoenix
4-pin Phoenix
Dimensions (H x W at front x D)
9.2 x 5.1 x 6.5 in
(234 x 127 x 165 mm)
12.2 x 6.9 x 8.5 in
(234 x 127 x 165 mm)
16.5 x 9 x 11.75 in
(419 x 228 x 298 mm)
16.25 x 23 x 12 in
(412 x 584 x 305 mm)
13.78 x 7.41 x 3.76 in
(350 x 188.3 x 95.6 mm)
18.31 x 10.08 x 3.95 in
(465 x 256 x 100.3 mm)
Net Weight (incl. mounting bracket)
3.3 lb (1.5 kg)
8.5 lb (3.9 kg)
12 lb (5.3 kg)
40 lb (18.1 kg)
6.39 lb (2.9 kg)
12.79 lb (5.8 kg)
27
LOUDSPEAKERS
CONCERT
Designed with both the contractor and listener in mind,
EVID ceiling speakers are high-performance problemsolvers that deliver exceptional sound in even the most
challenging situations. From the compact power of the C4.2
to the exclusive waveguide-coupled design of the C8.2HC,
each great-sounding EVID solution is uniquely suited to
INSTALL
EVID C4.2D
handle installer needs across a specific range of intended
applications. Sonically superior and aesthetically pleasing,
every EVID ceiling model installs with ease and provides
lasting value. For commercial sound across all venue
types, EVID has the ceiling covered.
4 INCH TWO-WAY COAXIAL CEILING LOUDSPEAKER
PORTABLE PA
• Designed for use in air-handling spaces
• Ported enclosure for extended bass response
• Waveguide-coupled 0.75 inch
titanium-coated tweeter
• Full-bandwidth overload protection
• Integrated transformer for 70 V, 100 V, or 8 Ω use
MOBILE AUDIO
EVID C8.2D
EVID C8.2LP
8 INCH TWO-WAY COAXIAL CEILING LOUDSPEAKER
•
•
•
•
•
•
EVID C8.2HC
Ported enclosure for extended bass response
Waveguide-coupled 1 inch titanium-coated tweeter
Full-bandwidth overload protection
Integrated transformer for 70 V, 100 V, or 8 Ω use
Front-panel mode/wattage selector
Safe, easy installation with included
tile bridge and mounting ring
• Complete package, requires no
additional accessories
• Low-profile LP version delivers
rich sound in tight spaces
• EVID C8.2 available in black or white
8 INCH PATTERN-CONTROL TWO-WAY COAXIAL CEILING LOUDSPEAKER
•
•
•
•
•
•
28
• Front-panel mode/wattage selector
• Safe, easy installation with included
tile bridge and mounting ring
• Available in black or white
• Complete package, requires no
additional accessories
Maximum fidelity and intelligibility for high ceilings
Ported enclosure for extended bass response
Waveguide-coupled 1 inch titanium-coated tweeter
Full-bandwidth overload protection
Integrated transformer for 70 V, 100 V, or 8 Ω use
Front-panel mode/wattage selector
• Safe, easy installation with included
tile bridge and mounting ring
• White semi-gloss perforated grille
• Complete package, requires no
additional accessories
EVID Ceiling Speaker Systems
EVID C10.1
10 INCH HIGH-POWER CEILING SUBWOOFER
EVID C12.2
• Internally damped heavy-gauge steel enclosure
• Safe, easy installation with included
tile bridge and mounting ring
• White semi-gloss perforated grille
• Complete package, requires no
additional accessories
EVID C8.2HC
EVID C.12.2
EVID C10.1
Frequency Range (-10 dB)
65–20,000 Hz
50–20,000 Hz
50–20,000 Hz
65–20,000 Hz
45–180 Hz
Sensitivity (SPL, 1 W @ 1 m)
86 dB
91 dB
93 dB
100 dB
94 dB
Power Handling (8 Ω)
80 W (overload protected)
100 W (overload protected)
100 W (overload protected)
100 W
150 W
Coverage Pattern
130° conical
110° conical
75° conical (@ >1 kHz)
90° average
180°
Transformer Power Taps
1.88 (70 V only), 3.75, 7.5, 15,
30 W
1.88 (70 V only), 3.75, 7.5, 15,
30 W
7.5 (70 V only), 15, 30, 60 W
4 (70 V only), 8, 16, 32, 64 W
ASC protected
7.5 (70 V only), 15, 30, 60 W
LF Transducer
4 in polypropylene cone
8 in polypropylene cone
8 in polypropylene cone
plus waveguide
12 in EVID 920-8B (coax)
10 in polypropylene cone
HF Transducer
0.75 in (19 mm) Ti Mylar Laminate Dome
1 in (25 mm) Ti Mylar Laminate
Dome
1 in (25 mm) Ti Mylar Laminate
Dome
1 in (25 mm) coax
—
Input Configuration
8 Ω, 70 V, 100 V
8 Ω, 70 V, 100 V
8 Ω, 70 V, 100 V
8 Ω / 70 V / 100 V
8 Ω, 70 V, 100 V
Dimensions (H x Diameter)
6.93 x 7.13 in
(176 x 181 mm)
7.01 x 10.65 in (178 x 270 mm) 11.99 x 12.60 in
10.04 x 10.63 in (255 x 270 mm) (303 x 320 mm)
13.18 x 16.3 in
(333 x 414 mm)
11.99 x 12.60 in
(303 x 320 mm)
Net Weight
6.0 lb (2.7 kg)
11.0 lb (5.0 kg)
27.12 lb (12.3 kg)
15.4 lb (7.0 kg)
Mounting System
Grille Construction
Available Colors
13.2 lb (6.0 kg)
Ported cabinet, internally damped, two-way (passive crossover included)
MOBILE AUDIO
EVID C8.2D
EVID C8.2LP
PORTABLE PA
INSTALL
• 3/8 inch threaded-rod mount
points for open ceilings
• Safe, easy installation with included
tile bridge and mounting ring
• Complete package, requires no
additional accessories
EVID C4.2D
Cabinet Construction
CONCERT
12 INCH TWO-WAY COAXIAL CEILING LOUDSPEAKER
• Full-range power for high ceilings, large spaces
• High sensitivity, high power-handling
• Integrated transformer with automatic
saturation compensation for distortionfree 70 V, 100 V, or 8 Ω use
• Front-panel mode/wattage selector
• White semi-gloss perforated grille
• Heavy-gauge steel enclosure in black
Acoustic Design
LOUDSPEAKERS
• Supplemental LF for ceiling systems
• High-excursion woofer in ported
enclosure for extended lows
• Low pass network with overload protection
• Integrated transformer for 70 V, 100 V, or 8 Ω use
• Front-panel mode/wattage selector
Dual ported cabinet, internally
damped
Steel enclosure and UL94V-0 rated baffle and bezel
Integrated 3-point toggle anchors
Powder-coated steel
White (paintable surface)
29
LOUDSPEAKERS
S-40
ULTRACOMPACT 5.25 INCH TWO-WAY FULL-RANGE LOUDSPEAKER
CONCERT
INSTALL
PORTABLE PA
FRi-2082
FRi-28LPM
Delivering high performance in an ultra-compact
package, the S-40 is ideal for both distributed
and near-field applications requiring high-quality
sound. The two-way short-throw system is housed
in an optimally vented, high-impact polystyrene
enclosure that is suited for installation both
indoors and out. Lows are handled by a 5.25
inch direct-radiating woofer with a polypropylene
cone, while the high-frequency section is a
one inch direct-radiating soft-dome tweeter that
is ferrofluid cooled. Built-in automatic power
limiting independently protects each driver from
unsafe transients. With mounting options that are
flexible enough for virtually any application, the
S series is perfect for anything from background
and foreground music in restaurants and clubs
to near-field monitoring in control rooms and
broadcast studios.
• Ideal for both distributed and
near-field applications
• Designed for indoor and outdoor use
• Direct-radiating polypropylene-cone woofer
• 1 inch ferrofluid-cooled soft-dome tweeter
• High power-handling, ultra-linear
frequency response
• Vented trapezoidal enclosure of
high-impact polystyrene
• Passive crossover with power protection
for both woofer and tweeter
• OmniMount®-compatible 0.25
inch suspension points (2)
DUAL 8 INCH TWO-WAY FULL-RANGE LOUDSPEAKER
MOBILE AUDIO
This speaker remains one of our most popular
choices for speech reinforcement, for underbalcony and on-wall locations in permanent
installations, and as a high-quality monitor
system. Dual 8 inch drivers in a tuned enclosure
are matched to a 1 inch titanium compression
driver with a 100° x 100° Constant Directivity
waveguide.
•
•
•
•
• Versatile 45° aiming angle for under-balcony,
on-wall, and stage monitoring applications
• Mounting bracket included (FRi-2082 only)
• Two 3/8 inch suspension points
Ultra-compact LF-optimized vented enclosure
1 inch HF driver on Constant Directivity waveguide
100° H x 100° V coverage pattern
Low-profile slanted design
The FRi-2082 comes with a mounting bracket
for horizontal or vertical orientation, while the
FRi-28LPM has non-skid rubber mounting feet to
make it more appropriate for stage monitoring.
S-40
85–20,000 Hz
Frequency Response (- 3dB)
Sensitivity (SPL, 1 W @ 1 m)
85 dB
Frequency Range (-10 dB)
55–16,000 Hz
Max. SPL/1m (calc.)
113 dB
Recommended High-Pass Frequency
50 Hz (12 dB/octave)
Power handling (Long-term, Short-term)
120 W, 480 W
Axial Sensitivity, Biamp (SPL, 1 W @ 1 m)
93 dB
Coverage, H x V
100° x 100°
Max. SPL /1 m (calc.), full space
122 dB
Directivity Index
9.8 dB (+3.8/-3.6 dB), 2–20,000 Hz
Power Handling, Biamp (Continuous, Peak)
200 W, 800 W
LF Transducer
5.25 in
Coverage (nominal -6 dB) H x V
100° x 100° (Const. Dir. waveguide)
HF Transducer
1 in softdome
LF Transducer
Two 8 in (203 mm)
Crossover frequencies
3,500 Hz
HF Transducer
1 in (25 mm) compression driver
Nominal impedance (low Z version)
4Ω
Crossover Frequency
2,800 Hz
Minimum impedance (low Z version)
3.7 Ω
Nominal Impedance (Biamp)
8Ω
Input connections
Spring terminal
Input Connections
Barrier strip
Dimensions (H x W at front x D)
9.8 x 7 x 5.9 in (249 x 178 x 150 mm)
Dimensions (H x W at front x D)
8.75 x 24.5 x 14 in (222 x 620 x 356 mm)
Net Weight (including mounting bracket)
5.7 lb (2.6 kg)
Net Weight
40 lb (18.2 kg)
See page 50 for S-40 and page 47 for FRi-2082 Rigging and Accessories.
30
FRi-2082 & FRi-28LPM
Frequency Response (+/- 3 dB)
70–20,000 Hz
LOUDSPEAKERS
CONCERT MONITORS
Xw12A
Xw15A
12 INCH TWO-WAY FLOOR MONITOR
CONCERT
15 INCH TWO-WAY FLOOR MONITOR
• DL12ST woofer with
Ring-Mode Decoupling
for vocal clarity
• EVX155 woofer with
4 inch voice coil
INSTALL
Two-way, high-output design
Vented LF enclosure
Two symmetrical 55° enclosure angles
Ultracompact for all-size stages
PORTABLE PA
•
•
•
•
• 3 inch ND6-16 titanium/neodymium HF compression driver
• 80° x 55° Constant Directivity waveguide
• Neutrik Speakon paralleled pass-through
connectors on each end
• Two integrated handles
TOUR X FLOOR MONITORS
•
•
•
•
•
Compact with high output
Ideal for small-to-medium stages
Signal Synchronized Transducers™ for woofer/tweeter alignment
Low-distortion SMX2121 woofer with fully symmetric drive
1.25 inch DH3/2010A titanium HF compression driver
TX1122FM 12 INCH TWO-WAY FULL-RANGE MONITOR
•
•
•
•
•
90° H x 50° V Constant Directivity waveguide
Integrated 24 dB/octave crossover with HF protection
99 dB sensitivity, 132 dB maximum SPL
Power handling: 500 W continuous, 2000 W peak
Black EVCoat finish
TX1152FM 15 INCH TWO-WAY FULL-RANGE MONITOR
• Low-distortion SMX2121 woofer
with fully symmetric drive
• 99 dB sensitivity, 132
dB maximum SPL
Frequency Response (-3 dB)
Xw12A
Xw15A
65 Hz – 18 kHz
55–18,000 Hz
• Ultra low-distortion SMX2151
woofer with fully symmetric drive
• 100 dB sensitivity, 133
dB maximum SPL
Speaker Type
TX1122FM
TX1152FM
Full-range
Full-range
Recommended High-Pass Frequency System controller determined System controller determined
Frequency Response (-3 dB)
70 Hz – 20 kHz
65 Hz – 20 kHz
Axial Sensitivity (SPL, 1 W @ 1 m),
LF/HF
98/110 dB
99/110 dB
Frequency Range (-10 dB)
55 Hz – 20 kHz
45 Hz – 20 kHz
Sensitivity (SPL, 1 W/1 m)
99 d B (1w/1m)
100 dB
Max. SPL @ 1 m (calc.), full space,
LF/HF
129/135 dB
133/135 dB
Max. SPL/1m (calc)
132 dB
133 dB
500 W, 2000 W
500 W, 2000 W
Long-Term Power Handling, LF/HF
300/75 W
600/75 W
System Power Handling
(Continuous, Peak)
Short-Term Power Handling (peak),
LF/HF
1200/300 W
2400/300 W
Coverage(Nominal -6 dB)
90° H x 50° V
90° H x 50° V
LF Transducer
12 in SMX2121
15 in SMX2151
Coverage (nominal -6 dB) H° x V°
55° x 80°
(Const. Dir. waveguide)
55° x 80°
(Const. Dir. waveguide)
HF Transducer
1.25 in DH3/2010A
1.25 in DH3/2010A
Directivity Index
11.6 dB (+2.3/-2.1 dB)
1,200–16,000 Hz
11.6 dB (+3.0/-3.6 dB)
1,200–16,000 Hz
Internal Crossover
Yes
Yes
Crossover Frequency
1,600 Hz
1,750 Hz
LF woofer (transducer)
12 in (DL12ST)
15 in (EVX155)
Nominal Impedance (Passive)
8Ω
8Ω
HF throat diameter (transducer)
1.4 in (ND6-16)
1.4 in (ND6-16)
Minimum Impedance
6.4 Ω
6.2 Ω
Crossover Frequencies
Factory preset
Factory preset
Input Connections
Parallel Neutrik NL4
Parallel Neutrik NL4
Nominal Impedance, LF/HF
8 Ω/16 Ω
8 Ω/16 Ω
Minimum Impedance, LF/HF
8.2 Ω/10.5 Ω
7.2 Ω/14.3 Ω
Enclosure Material
Plywood and MDF with
EVCoat
Plywood and MDF with
EVCoat
Input Connections
2 four-pin Speakon
2 four-pin Speakon
Flying Suspension
Six 3/8 in threaded inserts
Six 3/8 in threaded inserts
Dimensions in floor position
(H x W at front x D)
23 x 17.2 x 12.2 in
(534 x 449 x 313 mm)
25.4 x 18 x 13.4 in
(644 x 452 x 340 mm)
Dimensions (H x W x D)
17.3 x 14.3 x 22.6 in
(440 x 364 x 573 mm)
18.7 x 17.3 x 25.8 in
(475 x 439 x 655 mm)
Net Weight
48 lb (21.9 kg)
62.5 lb (28.4 kg)
Net Weight
43.7 lb (19.8 kg)
51.9 lb (23.5 kg)
See page 40 for Tour X Loudspeakers.
31
MOBILE AUDIO
Our top-of-the-line floor monitors, originally designed as
part of the X-Array touring line.
LOUDSPEAKERS
CONCERT
Designed for top-notch quality with amazing versatility, the
ZX/ZXA series sets a new standard of performance and
practicality in sound reinforcement loudspeakers. Featuring
high-end components and lightweight molded enclosures,
the ZX/ZXA line is at home in any installed or portable
application, from commercial sound to clubs, houses of
worship, stages, arenas, and stadiums. Newly-designed
high-power woofers and drivers ensure full-range sound
INSTALL
ZX1
8 INCH TWO-WAY FULL-RANGE COMPOSITE LOUDSPEAKER
PORTABLE PA
•
•
•
•
•
•
•
ZX1i
Smooth, wide frequency response
Ideal for mains, fills, or monitors
Velocity-compensated port for exceptional LF
Long-excursion weather-treated EV8L woofer
1.25 inch DH2005 titanium HF compression driver
Rotatable 90º x 50º waveguide for flexible coverage
Passive crossover with full-band overload protection
MOBILE AUDIO
Install version of the ZX1
Indoor/outdoor design
Ideal for installed mains, fills, or distributed sound
Velocity-compensated port for exceptional LF
Long-excursion weather-treated EV8L woofer
1.25 inch DH2005 titanium HF compression driver
Choice of 90º x 50º or 100º x 100º rotatable waveguide
Passive crossover with full-band overload protection
Also available in 70/100 volt transformer
•
•
•
•
•
version with Electro-Voice patented ASC
(Automatic Saturation Compensation)
High sensitivity, 123 dB maximum SPL
Power handling: 200 W continuous, 800 W peak
Compact high-impact polypropylene enclosure
Integrated QuickSAM heavy-duty
Strong-Arm Mounting bracket
Paintable black or white finish
• Pole mount for full-range systems
12 INCH TWO-WAY FULL-RANGE LOUDSPEAKER
•
•
•
•
•
•
•
32
High sensitivity, 123 dB maximum SPL
Power handling: 200 W continuous, 800 W peak
High-impact polypropylene enclosure
Compact monitor-friendly wedge shape
Integrated pole mount adapter and pocket handle
Four Metric mounting inserts
Available in black or white
12 INCH POWERED SUBWOOFER
• 15 mm plywood enclosure, internally
braced, with textured paint
• EVS-12S 12 in (305 mm) woofer for
powerful, engaging bass response
ZX3
•
•
•
•
•
•
•
8 INCH TWO-WAY FULL-RANGE INDOOR/OUTDOOR LOUDSPEAKER
•
•
•
•
•
•
•
•
•
ZX1-SUB
with awesome richness and clarity. Sleek contemporary
styling fits in anywhere. Lightweight makes transport easy
while enabling a multitude of flying and mounting options
that are each supported by innovative mechanical solutions.
Whether for portable use or permanent installation, the
ZX/ZXA series represents the next level in advanced
loudspeaker technology.
Versatile performance for mains, fills, or monitors
DVX3121A woofer with forced-air cooling
2 inch ND2 titanium/neodymium HF driver
Passive crossover
Choice of 90º x 50º or 60º x 60º coverage waveguide
High sensitivity, 131 dB maximum SPL
Power handling: 600 W continuous, 2400 W peak
•
•
•
•
•
•
High-impact polypropylene enclosure
Compact monitor-friendly wedge shape
Up to four anchor-plate attachments
Seven M8 mounting inserts
Integrated handle
Available in black and white
ZX/ZXA
15 INCH TWO-WAY FULL-RANGE LOUDSPEAKER
ZX5
Perfect for portable mains and monitors
EVS15-SF woofer
1.25 inch DH3/2010A titanium HF driver
Passive crossover
90º x 50º coverage waveguide
High sensitivity, 132 dB maximum SPL
Power handling: 400 W continuous, 1600 W peak
•
•
•
•
•
Lightweight high-impact polypropylene enclosure
Wedge shape for monitors at 45° or 55°
Integrated pole mount adapter and pocket handle
Mounting via attachment plates or eyebolts
Black finish
LOUDSPEAKERS
•
•
•
•
•
•
•
ALL-WEATHER 15 INCH TWO-WAY FULL-RANGE LOUDSPEAKER
Versatile performance for mains, fills, or monitors
DVX3150A woofer with forced-air cooling
2 inch ND2 titanium/neodymium HF driver
Switchable biamp or passive crossover operation
Choice of 90º x 50º or 60º x 60º coverage waveguide
High sensitivity, 132 dB maximum SPL
Power handling: 600 W continuous, 2400 W peak
•
•
•
•
•
•
High-impact polypropylene enclosure
Wedge shape for monitors at 45° or 55°
Up to five anchor-plate attachments
Ten M8 mounting inserts
Integrated handle
Available in black or white
INSTALL
•
•
•
•
•
•
•
CONCERT
ZX4
•
•
•
•
•
•
•
ZXA1-SUB
Powered ZX1, ideal for portable and monitor use
Integrated 800 W 2-channel (biamp) amplifier
Long-excursion weather-treated EV8L woofer
1.25 inch DH2005 titanium HF compression driver
Rotatable 90º x 50º waveguide for flexible coverage
Steep crossover slopes and transducer protection
123 dB maximum SPL
• Microphone and line level inputs
• Switchable high-pass filter for use with subwoofer
• Compact wedge-shape enclosure of
lightweight impact-resistant polystyrene
• Integrated pole mount adapter and pocket handle
• Four #8-32 suspension points for installation
• Available in black or white
12 INCH POWERED SUBWOOFER
• 15 mm plywood enclosure, internally
braced, with textured paint
• EVS-12S 12 inch (305 mm) woofer for
powerful, engaging bass response
• Class D lightweight amplifier
ZXA5
PORTABLE PA
POWERED 8 INCH TWO-WAY FULL-RANGE LOUDSPEAKER
MOBILE AUDIO
ZXA1
•
•
•
•
Pole mount for full-range systems
Dual XLR inputs and outputs
Switchable EQ modes for different applications
LED indicators for power on and limit
POWERED 15 INCH TWO-WAY FULL-RANGE LOUDSPEAKER
•
•
•
•
•
•
•
Ideal for both portable and installation use
Integrated 2-channel amplifier, 1000 W LF, 250 W HF
DVX3150A woofer with forced-air cooling
2 inch ND2 titanium/neodymium HF driver
90º x 50º coverage waveguide
High sensitivity, 133 dB maximum SPL
Switchable high-pass filter for use with subwoofer
•
•
•
•
•
•
•
PowerCon connector with slave through
Compact enclosure of high-impact polypropylene
Wedge shape for monitors at 45° or 55°
Integrated handle
Up to five anchor-plate attachments
Ten M8 mounting inserts
Available in black or white
See page 51 for ZX/ZXA Rigging and Accessories and page 50 for ZXA1and ZXA1-Sub Covers.
33
ZX/ZXA
LOUDSPEAKERS
CONCERT
ZX1
ZX1i
Full-range, mid-high,
two-way, wedges
Full-range, mid-high,
two-way
ZX3
ZX4
ZX5
Passive Subwoofer
Full-range
Full-range, mid-high,
two-way, wedges
Full-range, mid-high,
two-way, wedges
Frequency
60–20,000 Hz
Response (-3 dB)
60–20,000 Hz
53–125 Hz1
58–15,000 Hz
60–20,000 Hz
58–18,000 Hz
60–20,000 Hz (fullrange mode)
58–18,000 Hz
53–93 Hz1
Frequency Range
48–20,000 Hz
(-10 dB)
48–20,000 Hz
42–200 Hz1
48–20,000 Hz
42–20,000 Hz
39–20,000 Hz
48–20,000 Hz (fullrange mode)
50–20,000 Hz
44–118 Hz1
Sensitivity
(SPL, 1 W/1 m)
94 dB
94 dB
94 dB
97 dB
100 dB
98 dB
—
—
—
Max. SPL/1m
(calc)
123 dB
123 dB
127 dB1,2
131 dB
132 dB
132 dB
123 dB
133 dB
126 dB1, 2
Power Handling
200, 800 W
(Continuous, Peak)
200, 800 W
400 W Cont., 800 W
Prog., 1600 W Peak
600, 2400 W
400,1600 W
600, 2400 W
—
—
700 W
Coverage
(Nominal -6 dB)
90° x 50° rotatable
90° x 50° rotatable
Omnidirectional
100° x 100° rotatable
90° H x 50° V
90° H x 50° V
60° H x 60° V
90° x 50° rotatable
90° H x 50° V
60° H x 60° V
Omnidirectional
LF Transducer
8 in EV8L
8 in EV8L
12-in EVS-12S Woofer 12 in DVX3121A
15 in EVS15-SF
15 in DVX3150A
8 in EV8L
15 in DVX3150A
12 in EVS-12S Woofer
HF Transducer
1.25 in DH2005
1.25 in DH2005
—
1.25 in DH3/2010A
2 in ND2
1.25 in DH2005
2 in ND2
—
36 Hz
100 Hz
(user selectable)
—
—
—
Speaker Type
ZX1-SUB
INSTALL
PORTABLE PA
90° H x 50° V
60° H x 60° V
2 in ND2
ZXA1
ZXA5
Full-range, powered monitors, powered
speakers, two-way, wedges
ZXA1-SUB
Powered Subwoofer
MOBILE AUDIO
Recommended
High-Pass
Frequency
40 Hz
40 Hz
—
50 Hz
42 Hz
36 Hz
Nominal Impedance (Passive)
8Ω
8Ω
8Ω
8Ω
8Ω
8Ω
—
Two XLR Stereo Input
Input Connections
Parallel Neutrik NL4
4-pin Phoenix
Speakon
Two NL4
2 conductor SJO cable
Parallel Neutrik NL4
and gland nut
Parallel Neutrik NL4
XLR and TRS Combo;
XLR with Independent XLR
Gain
Internal Crossover Yes
Yes
—
Yes
Yes
Switchable biamp or
passive crossover
—
—
—
Crossover
Frequency
1.7 kHz
1.7 kHz
—
2 kHz
1,500 Hz
1,500 Hz
1,800 Hz
1,500 Hz
100 Hz
Minimum
Impedance
6Ω
6Ω
7.5 Ω
6.2 Ω
6.5 Ω
6.5 Ω
—
—
—
Amplifier Power
(RMS)
—
—
—
—
—
—
800 W
1250 W
800 W
Power
Requirement
—
—
—
—
—
—
120V: 95V–132V, 50–60 Hz, 0.6A
230V:190V–264V, 50–60 Hz, 0.4A
120V: 90V–132V,
50–60 Hz, 1.0A
230V: 190V–264V,
50–60 Hz, 0.6A
Enclosure Material
High-Impact Polystyrene
9-ply, 15 mm plywood,
internally braced with
textured paint
High-Impact Polystyrene
9-ply, 15 mm plywood,
internally braced with
textured paint
Grille
Polyester Powder Coated,
18 ga Galvanized Steel
16 ga Steel with Black
Powder Coat
Polyester Powder Coated, 18 ga Galvanized Steel
16 ga Steel with Black
Powder Coat
Flying
No
Yes
No
Yes
Yes
Yes
No
Yes
No
Outdoor
No
Yes
No
Yes
No
Yes
No
No
No
Color
Black
Black, white
Black
Black, white
Black
Black, white
Black
Black, white
Black
Dimensions
(H x W x D)
27.24 x 17.56 x
15.75 x 17.50 x 18.00 in
15.75 x 17.50 x 18.00 in 24.14 x 15.64 x
17.98 x 11.12 x 10.38 in 17.76 x 11.1 x 10.35 in
27.01 x 17.52 x 15.98 in 27.24 x 17.56 x 16.18 in 17.99 x 11.1 x 10.39 in
(400 x 444.5 x
16.18 in
(400 x 444.5 x
14.26 in
(457 x 282 x 264 mm) (451 x 282 x 263 mm)
(686 x 445 x 406 mm) (692 x 446 x 411 mm) (457 x 282 x 264 mm)
(692 x 446 x 411 mm) 457.2 mm)
457.2 mm)
(613 x 397 x 362 mm)
Net Weight
18.52 lb (8.4 kg)
1
2
34
18.52 lb (8.4 kg)
43.6 lb (19.8 kg)
43.65 lb (19.8 kg)
44.53 lb (20.2 kg)
48.94 lb (22.2 kg)
19 lb (8.62 kg)
50.49 lb (22.9 kg)
Half-Space
Typical maximum SPL value at one meter over the usable frequency range, measured with a pink-noise burst signal, using internal signal processing and amplifier driven to peak output.
46.0 lb (20.9 kg)
LOUDSPEAKERS
WORLD’S GREATEST GUITAR LOUDSPEAKER
Classic sound with road-ready reliability
Favorite of guitarists in all styles
High-performance heavy-duty design
200 W Power handling
Frequency response: 80 Hz – 7 kHz (-10 dB)
• Heavy-duty cast frame for reduced
low-frequency flex
• Large 16 lb (7.3 kg) magnet assembly
• Manufactured in the USA
PORTABLE PA
•
•
•
•
•
INSTALL
EVM12L Classic
features improved power handling, magnet design, and
venting. Either way, guitarists and bassists love how
tough the EVM12L sounds—and how tough it is. For
the world's most punishing players, there's only one guitar
speaker line that delivers the goods night after night, tour
after tour: the Electro-Voice EVM-12L.
CONCERT
Known for huge tone, gorgeous low-end, and incredible
stability at extreme volumes, the EVM12L Classic 12 inch
musical instrument loudspeaker has been a favorite
since its introduction in 1983. For an even louder, harder
tone there's the EVM-12L Black Label, the official guitar
loudspeaker of Zakk Wylde and Black Label Society, which
ZAKK WYLDE SIGNATURE GUITAR SPEAKER
• Official guitar loudspeaker of Zakk
Wylde and Black Label Society
• EVM-12L sound with enhanced
magnet design and venting
• 300 W power handling
• Frequency response: 80 Hz – 7 kHz (-10 dB)
MOBILE AUDIO
EVM12L Black Label
• Sensitivity 100 dB
• Large 16 lb (7.3 kg) magnet assembly
• Handmade in the USA
EVM12L Classic
EVM12L Black Label
Cone Diameter
12 in (305 mm)
12 in (305 mm)
Coil Diameter
2.5 in (63.5 mm)
2.5 in (63.5 mm)
Frequency Range
80–7,000 Hz
80–7,000 Hz
Power Handling: Continuous (EIA), Peak
200, 1000 W
300, 1200 W
Sensitivity (SPL, 1 W @ 1 m)
100 dB
100 dB
Maximum SPL
125 dB
125 dB
Efficiency
5.9%
5.9%
Impedance
8Ω
8Ω
Frame Front Diameter
12.19 in (309.6 mm)
12.19 in (309.6 mm)
Magnet Diameter
7.5 in (190.5 mm)
7.5 in (190.5 mm)
Overall Depth
5.25 in (133.4 mm)
5.25 in (133.4 mm)
Mounting Bolt Circle Diameter
11.563 in (293.7 mm)
11.563 in (293.7 mm)
Baffle Cutout Diameter
11.063 in (281.0 mm)
11.063 in (281.0 mm)
Net Weight
19 lb (8.6 kg)
19 lb (8.6 kg)
35
LOUDSPEAKERS
CONCERT
The SX series includes some of the most popular
loudspeaker designs in history. SX loudspeakers offer
the tour-proven performance and reliability for which EV
is known. A versatile range of speaker configurations and
lightweight enclosures covers applications in commercial
sound, pro music, club sound, and performance and
sports venues. In live performance, the SX line can handle
tasks, such as front-of-house, side fills, delay lines, or
stage monitors. For installed sound, easy mounting and
multiple weather-ready versions provide flexible system
configuration for both indoor and outdoor venues. With high
power-handling, great coverage, and smooth, consistent
frequency response, cost-effective SX loudspeakers are
the hard-working, easy-setup solution to your installation
and portable system needs.
INSTALL
Sx300E
12 INCH TWO-WAY FULL-RANGE LOUDSPEAKER
PORTABLE PA
•
•
•
•
•
•
MOBILE AUDIO
Sx300PI
Sx300PIX
Compact, portable sound reinforcement
Designed for use alone or in arrays
Cast-frame DL12BFH woofer
1.25 inch DH3/2010A titanium HF compression driver
65° x 65° Constant Directivity waveguide
Ring-Mode Decoupling (RMD)
for increased intelligibility
Power handling: 300 W continuous, 1200 W peak
Dual Neutrik Speakon high-current connectors
Trapezoidal black or white polypropylene enclosure
Rubber feet and mating sockets for stacking
Integral handles, pole mount
WEATHER-RESISTANT 12 INCH TWO-WAY FULL-RANGE LOUDSPEAKERS
• Sx300 performance with enhanced weather-resistance
• PIX version has multi-tap transformer
for 70 or 100 V use
• Ideal for installation, alone or in arrays
• 1.25 inch DH3/2010A titanium HF compression driver
• 65° x 65° Constant Directivity waveguide
• Ring-Mode Decoupling (RMD)
for increased intelligibility
See page 50 for Sx300 and SB122 Rigging and Accessories.
36
•
•
•
•
•
•
•
•
•
•
•
Power handling: 300 W continuous, 1200 W peak
Neutrik Speakon (PI) or Phoenix (PIX) connectors
Trapezoidal enclosure of high-impact polypropylene
Rubber feet and mating sockets for stacking
Integral handles, pole socket, suspension points
Available in black or white
SX
WEATHER-RESISTANT DUAL-ELEMENT FULL-RANGE LINE ARRAY
65° x 65° Constant Directivity waveguide
Very high sensitivity (105 dB 1 W / 1 m)
Power handling: 600 W continuous, 2400 W peak
Lightweight trapezoidal polypropylene enclosure
SuperSAM mounting system
adjusts 60° V and 180° H
• Parallel Neutrik Speakon high
current input connectors
• Strong, composite trapezoidal enclosure
• Pole mount on top for pairing with ZX1
• Integral handle
• Available in black
Sx300 (all)
Sx600 (all)
SB122
Frequency Range (-10 dB)
50–20,000 Hz
70–16,000 Hz
43–200 Hz
Recommended High-Pass Frequency
—
90 Hz
40 Hz (12 dB/octave)
Axial Sensitivity, Biamp (SPL, 1 W @ 1 m)
99 dB
105 dB
99 dB (half space)
Max. SPL @ 1 m (calc.), full space
Low Z: 131 dB
100V: 123 dB
139 dB
131 dB (half space)
400, 1600 W
Power Handling (Long-term, Short-term), Low Z
300, 1200 W
600, 2400 W
Coverage (nominal -6 dB) H x V
65° x 65° (Const. Dir. waveguide)
65° x 65° (Const. Dir. waveguide)
Omnidirectional
Directivity Index (800–16,000 Hz)
11.1 dB (+2.4/-4.1 dB)
11.3 dB
—
LF Transducers
12 in DL12BFH
12 in DL12BFH (LF),
12 in ND12A (MB)
12 in EVS12SB
HF Transducer
1.25 in DH3/2010A
2 in DH2T
—
Crossover Frequencies
1,500 Hz
1,800 Hz
80–160 Hz
Nominal Impedance (non-transformer)
8Ω
4Ω
8Ω
Minimum Impedance (non-transformer)
5.0 Ω
3.5 Ω
6.0 Ω
Input Connections
2 four-pin Speakon
SJO cable/gland nut
2 four-pin Speakon
Dimensions (H x W at front x D)
23.07 x 16.89 x 12.28 in (586 x 429 x 312 mm) 45.79 x 16.89 x 12.28 in (1163 x 429 x 312 mm)
23.07 x 16.89 x 12.28 in (586 x 429 x 312 mm)
Net Weight
31.97 lb (14.5 kg)
PIX: 39.0 lb (17.7 kg)
33 lb (14.6 kg)
80 lb (36.3 kg)
INSTALL
• SB122 performance with enhanced
weather-resistance
• Low-pass filter for parallel connection
without added amp
• Large vent for enhanced LF output
• Cast-frame EVS12SB long-excursion woofer
• Power handling: 400 W continuous, 1600 W peak
CONCERT
COMPACT 12 INCH SUBWOOFER
PORTABLE PA
SB122
•
•
•
•
•
LOUDSPEAKERS
• High output with exceptional outdoor performance
• Ideal for arenas, stadiums, and race tracks
• 600 W multi-tap transformer (PIX
only) for 70 or 100 V use
• High intelligibility at high SPL (139 dB max)
• Cast-frame 12 inch DL12BFH woofer
• Neodymium-based 12 inch ND12A mid-driver
• 2 inch DH2T titanium HF compression driver
MOBILE AUDIO
Sx600PI
Sx600PIX
37
LOUDSPEAKERS
CONCERT
The Rx series has become the standard for regional
sound companies, rental professionals, and contractors
who want compact high-performance loudspeakers with
concert-grade EV components. Covered with rugged
EVCoat, Rx looks great stacked, on poles, as monitors.
Unique, fully-rotable asymmetrical waveguides have a
15-degree downward bias to ensure high-frequency
INSTALL
Rx 112/75
12 INCH TWO-WAY FULL-RANGE LOUDSPEAKER
PORTABLE PA
•
•
•
•
•
•
MOBILE AUDIO
Rx 115/75
•
•
•
•
•
•
Externally switchable biamped or passive operation
High sensitivity, 131 dB maximum SPL (peak)
Power handling: 300 W continuous, 1200 W peak
5-sided 13-ply birch enclosure with monitor slant
Built-in handles
Black or white
Compact with high output
Ideal for mains (small-to-medium rooms) or monitors
Cast-frame woofer, vented cabinet for extended LF
3 inch DH7 titanium HF compression driver
Rotatable 75° x 50° Constant Directivity waveguide
Asymmetric 10° down-angled coverage
•
•
•
•
•
•
Externally switchable biamped or passive operation
High sensitivity, 130 dB maximum SPL (peak)
Power handling: 400 W continuous, 1600 W peak
5-sided 13-ply birch enclosure with monitor slant
Built-in handles
Black or white
•
•
•
•
Rectangular 13-ply birch vented enclosure
Built-in handles and 1 3/8 inch pole-mount receptacle
Four threaded T-nuts for casters or dollies
Black EVCoat finish
COMPACT 18 INCH SUBWOOFER
•
•
•
•
•
38
Compact with high output
Ideal for mains (small-to-medium rooms) or monitors
Cast-frame woofer, vented cabinet for extended LF
3 inch DH7 titanium HF compression driver
Rotatable 75° x 50° Constant Directivity waveguide
Asymmetric 10° down-angled coverage
15 INCH TWO-WAY FULL-RANGE LOUDSPEAKER
•
•
•
•
•
•
Rx 118S
coverage without the need to tilt the enclosure toward
the audience. Our powerhouse DH7 large-format driver (3
inch voice-coil, 1.4 inch exit) provides the high-frequency
engine, while a selection of DL and EVX woofers anchor
the low and sub frequencies. The combination of high-level
components, unique design, and versatility make Rx series
one of the best values in the industry.
Concert-proven high-output performance
Accurate transient detail
EVX-180B woofer for superior linear excursion
High sensitivity, 137 dB maximum SPL (peak)
Power handling: 600 W continuous, 2400 W peak
QRx
15 INCH THREE-WAY FULL-RANGE LOUDSPEAKER
Rx 212/75
•
•
•
•
•
•
Biamped operation
High sensitivity, 130 dB maximum SPL
Power handling: 400 W continuous, 1600 W peak
Trapezpoidal (15°/side) 13-ply birch enclosure
Built-in handles and L-Track rigging
Black EVCoat finish
LOUDSPEAKERS
• Compact with high-level, high-fidelity sound
• Cast-frame DL15ST woofer,
vented box for extended LF
• Horn-loaded 8 inch MF8 midrange driver
• 3 inch DH7 titanium HF compression driver
• Asymmetric (10° down-angled)
75° H x 50° V coverage
DUAL 12 INCH TWO-WAY FULL-RANGE LOUDSPEAKER
Full-range performance with extra-full lows
Ideal for mains in small-to-medium rooms
Cast-frame woofer, vented cabinet for extended LF
3 inch DH7 titanium HF compression driver
Rotatable 75° x 50° Constant Directivity waveguide
Asymmetric 10° down-angled coverage
•
•
•
•
•
•
Externally switchable biamped or passive operation
High sensitivity, 135 dB maximum SPL (peak)
Power handling: 600 W continuous, 2400 W peak
Trapezpoidal 13-ply birch enclosure
Built-in handles
Black or white
•
•
•
•
•
Power handling: 1200 W continuous, 4800 W peak
Rectangular 13-ply birch vented enclosure
Built-in handles and sealed pocket wheels (Standard)
Integrated pole-mount receptacle (Standard)
Black EVCoat finish
COMPACT DUAL 18 INCH SUBWOOFER
• High-level extended LF with concertproven performance
• Accurate transient detail
• Available in Standard and Riggable (L-Track) versions
• Woofers for superior linear excursion
• High sensitivity, 139 dB maximum SPL (peak)
Rx 112/75
Rx 115/75
QRx 153/75
Rx 212/752
Rx 118S
Rx 218S
Frequency Response (-3 dB)
75–15,000 Hz
60–15,000 Hz
50–16,000 Hz
75 Hz – 16,000 Hz
45–150 Hz
38–125 Hz
Frequency Range (-10 dB)
52–18,000 Hz
45–16,000 Hz
42–20,000 Hz
52 Hz – 18,000 Hz
30–250 Hz
31–250 Hz
Recommended High-Pass
Frequency
45 Hz (12 dB/octave)
45 Hz (12 dB/octave)
—
45 Hz (12 dB/octave)
36 Hz (12 dB/octave)
35 Hz (12 dB/octave)
Axial Sensitivity (SPL, 1 W @ 1 m)
(Biamp operation)
98 dB Passive
(100/112 dB)
98 dB
(98/110 dB)
98/105 dB
—
102 dB
(102/112 dB)
98 dB
—
102 dB
—
Max. SPL @ 1 m (calc.)
131 dB
130 dB
130 dB
135 dB
137 dB1
139 dB
Power Handling (Continuous, Peak) 350, 1400 W
450, 1800 W
—
650, 2600 W
600, 2400 W
1200, 4800 W
Power Handling, Biamp: Continuous LF 300 W/HF 75 W
Peak
LF 1200 W/HF 300 W
LF 400 W/HF 75 W
LF 1,600 W/HF 300 W
LF 400 W/MB-HF 150 W LF 600 W/HF 75 W
LF 1600 W/MB-HF 600 W LF 2400 W/HF 300 W
—
—
Coverage (nominal -6 dB) H x V
75° x 50° (up 15°, down
35°)
75° x 50° (up 15°, down
35°)
75° x 50° (up 15°, down
35°)
75° x 50° (up 15°, down
35°)
Omnidirectional
Omnidirectional
LF Transducer
12 in DL12BFH
15 in DL15X
15 in DL15ST
Two 12 in DL12BFH
18 in EVX-180B
Two 18 in EVX-180B
3 in DH7
MF: 8 in MF8
HF: 3 in DH7
3 in DH7
—
—
HF Transducer
3 in DH7
Crossover Frequencies (slope in
Biamp mode)
1,500 Hz (24 dB/octave)
1,500 Hz (24 dB/octave)
1,200 Hz
1,500 Hz (24 dB/octave)
100 Hz (24 dB/octave)
100 Hz (24 dB/octave)
Nominal Impedance (Biamp mode)
8 Ω (8 Ω/8 Ω)
8 Ω (8 Ω/8 Ω)
— (8 Ω/12 Ω)
4 Ω (4 Ω/8 Ω)
8Ω
4Ω
Input Connections
2 Neutrik NL4
2 Neutrik NL4
2 Neutrik NL4
2 Neutrik NL4
2 Neutrik NL4
2 Neutrik NL4
Dimensions (H x W at front x D)
26.6 x 15.35 x 14.6 in
(675 x 390 x 372 mm)
29.9 x 17.7 x 16.02 in
(759 x 450 x 407 mm)
48.8 x 18.4 x 19.09 in
(1,240 x 467 x 485 mm)
38.98 x 15.35 x 14.77 in
(990 x 390 x 375 mm)
35.5 x 17.7 x 23.6 in
(902 x 450 x 600 mm)
39.96 x 22.05 x 23.7 in
(1,015 x 560 x 602 mm)
71 lb (32.0 kg)
103.6 lb (47 kg)
80 lb (36.5 kg)
105 lb (47.5 kg)
150 lb (68 kg)
Net Weight (subs without wheel kit) 57.3 lb (26.0 kg)
MOBILE AUDIO
Rx 218S
PORTABLE PA
INSTALL
•
•
•
•
•
•
CONCERT
QRx 153/75
1
Half space
2
Available with Horizontal Mount Kit (QRx 212H/75)
39
LOUDSPEAKERS
CONCERT
Tour X brings the engineering excellence and aesthetic
design of EV's world-class tour systems to an innovative
and exciting series of portable loudspeakers. Combining
bold design and breakthrough performance, the Tour
X series is optimized for applications, such as club sound,
pro music, and concert sound. The line's full-range
loudspeakers and monitors utilize either 1.25 inch
DH3/2010A or 2 inch ND2 compression drivers,
protected by an advanced fourth-order crossover.
INSTALL
TX1122
Rotatable Constant Directivity waveguides provide
coverage-pattern flexibility while 12 inch or 15 inch
SMX woofers deliver high power-handling with high
sensitivity. Tour X 18 inch subwoofers, meanwhile, use
high-excursion EVS-18S LF transducers to ensure
plenty of impact with ultra-low distortion. For tourclass performance in a portable package that's surprisingly
affordable, look no further than Tour X.
12 INCH TWO-WAY FULL-RANGE LOUDSPEAKER
PORTABLE PA
• High-quality sound at high levels
• Excellent pattern control for short-to-medium throw
• Low-distortion SMX2120 woofer
with fully symmetric drive
• 1.25 inch DH3/2010A titanium HF compression driver
• 90° H x 50° V Constant Directivity waveguide
• Advanced fourth-order crossover with HF protection
MOBILE AUDIO
TX1152
•
•
•
•
•
•
100 dB sensitivity, 133 dB maximum SPL
Power handling: 500 W continuous, 2000 W peak
Lightweight trapezoidal plywood/MDF enclosure
Pole mount for use with subwoofer or stand
Six M8x30 threaded suspension points
Black EVCoat finish
DUAL 15 INCH TWO-WAY FULL-RANGE LOUDSPEAKER
•
•
•
•
•
•
40
97 dB sensitivity, 130 dB maximum SPL
Power handling: 500 W continuous, 2000 W peak
Lightweight trapezoidal plywood/MDF enclosure
Pole mount for use with subwoofer or stand
Six M8x30 threaded suspension points
Black EVCoat finish
15 INCH TWO-WAY FULL-RANGE LOUDSPEAKER
• High-output, high-quality sound
• Excellent pattern control for medium throw use
• Low-distortion SMX2151 woofer
with fully symmetric drive
• 1.25 inch DH3/2010A titanium HF compression driver
• 60° x 40° rotatable Constant Directivity waveguide
• Advanced fourth-order crossover with HF protection
TX2152
•
•
•
•
•
•
Very high SPL with smooth response
Ideal as mains for small-to-medium clubs
Excellent pattern control for medium throw use
Dual SMX2151 woofers with fully symmetric drive
2 inch ND2 neodymium HF compression driver
60° x 40° rotatable Constant Directivity waveguide
•
•
•
•
•
•
Advanced 6th-order crossover with HF protection
103 dB sensitivity, 139 dB maximum SPL
Power handling: 1000 W continuous, 4000 W peak
Internally braced trapezoidal plywood/MDF enclosure
Six M8x30 threaded suspension points
Black EVCoat finish
Tour X
TX1181
18 INCH SUBWOOFER
Top-side socket for speaker pole
Six mount points for optional wheel kit
Braced plywood/MDF enclosure
Black EVCoat finish
CONCERT
TX2181
•
•
•
•
LOUDSPEAKERS
• High-power LF supplement to TX1122 and TX1152
• High-excursion EVS-18S woofer
• 6 dB/octave low-pass filter for parallel
connection without added amp
• 100 dB sensitivity, 132 dB maximum SPL
• Power handling: 500 W continuous, 2000 W peak
DUAL 18 INCH SUBWOOFER
•
•
•
•
Power handling: 1000 W continuous, 4000 W peak
Six mount points for optional wheel kit
Braced plywood/MDF enclosure
Black EVCoat finish
INSTALL
High-power LF supplement to TX2152
Low-distortion port design
Two high-excursion EVS-18S woofers
Use with processor and dedicated amp channel
103 dB sensitivity, 138 dB maximum SPL
PORTABLE PA
•
•
•
•
•
Speaker Type
TX1122
TX1152
TX2152
TX1181
TX2181
Full-range
Full-range
Full-range
Subwoofer
Subwoofer
Frequency Response (-3 dB)
60–20,000 Hz
55–20,000 Hz
55–13,000 Hz
50–160 Hz
50–160 Hz
Frequency Range (-10 dB)
45–20,000 Hz
40–20,000 Hz
50–18,000 Hz
45–700 Hz
40–1,500 Hz
Sensitivity (SPL, 1 W/1 m)
97 dB
100 dB
103 dB
100 dB
103 dB
Max. SPL/1m (calc)
130 dB
133 dB
139 dB
132 dB
138 dB
System Power Handling
(Continuous, Peak)
500, 2000 W
500, 2000 W
1000, 4000 W
500, 2000 W
1000, 4000 W
Coverage(Nominal -6 dB)
90° H x 50° V
60° x 40° rotatable
60° x 40° rotatable
—
—
LF Transducer
12 in SMX2120
15 in SMX2151
Two 15 in SMX2151
18 in EVS-18S
Two 18 in EVS-18S
HF Transducer
1.25 in DH3/2010A
1.25 in DH3/2010A
2 in ND2
—
—
Internal Crossover
Yes
Yes
Yes
Low-pass filter
No
Crossover Frequency
1,750 Hz
1,650 Hz
1,750 Hz
—
—
Nominal Impedance (Passive)
8Ω
8Ω
4Ω
8Ω
4Ω
Minimum Impedance
5.4 Ω
5.6 Ω
3.1 Ω
7.5 Ω
2.9 Ω
Input Connections
Parallel Neutrik NL4
Parallel Neutrik NL4
Parallel Neutrik NL4
Parallel Neutrik NL4
Parallel Neutrik NL4
Enclosure Material
Plywood and MDF with EVCoat
Plywood and MDF with EVCoat
Plywood and MDF with EVCoat
Plywood and MDF with EVCoat
Plywood and MDF with EVCoat
Flying Suspension
Six 3/8 in threaded inserts
Six 3/8 in threaded inserts
Six 3/8 in threaded inserts
—
—
Dimensions (H x W x D)
24.25 x 15.04 x 14.96 in
(616 x 382 x 380 mm)
30.55 x 17.56 x 17.56 in
(776 x 446 x 446 mm)
45.43 x 20 x 18.54 in
(1154 x 508 x 471 mm)
30.28 x 17.28 x 23.27 in
(769 x 439 x 591 mm)
45.43 x 20 x 27.2 in
(1154 x 508 x 691 mm)
Net Weight
44.53 lb (20.2 kg)
61.29 lb (27.8 kg)
94.36 lb (42.8 kg)
74.52 lb (33.8 kg)
123.68 lb (56.1 kg)
MOBILE AUDIO
See page 31 for Tour X Floor Monitors.
41
Live
L
Liv
Li
ive
ve X
LOUDSPEAKERS
CONCERT
Clear, powerful, and musical, the Live X series was born to
command the stage for professional music performance.
Available in both powered and passive versions, Live X
loudspeakers offer top-quality components in remarkably
affordable configurations that put the EV-quality experience
within reach for artists, engineers, and live-sound
businesses. Designed for a wide range of portable
sound applications, Live X loudspeakers are housed in
INSTALL
ELX112
12 INCH TWO-WAY FULL-RANGE
hardy stackable enclosures of solid wood, making them
lighter than comparable-quality composite or plastic boxes
and therefore easier to load, transport, and set up. With
high output, extended frequency range, and high sensitivity,
Live X loudspeakers are clean, flat, and hot, making music of
all kinds sound its best. The Live X series is serious gear for
serious sound.
ELX112P
PORTABLE PA
• Compact power for sound
reinforcement and stage monitoring
• EVS-12K woofer
• 1.5 inch DH-1K titanium HF
compression driver
• 55 Hz – 20 kHz frequency range
• 90° x 50° coverage-pattern waveguide
• 60° monitor angle
• 132 dB maximum SPL
• Power handling: 250 W
continuous, 1000 W peak
• Braced 15 mm plywood enclosure
• Pole mount or stack with Live X subwoofers
• Black textured finish
MOBILE AUDIO
ELX115
15 INCH TWO-WAY FULL-RANGE
•
•
•
•
•
•
•
•
•
ELX115P
• More power, fuller sound for larger rooms
• EVS-15K woofer
• 1.5 inch DH-1K titanium HF
compression driver
• 50 Hz – 20 kHz frequency range
• 90° x 50° coverage-pattern waveguide
• 60° monitor angle
• 134 dB maximum SPL
• Power handling: 400 W
continuous, 1600 W peak
• Braced 15 mm plywood enclosure
• Pole mount or stack with Live X subwoofers
• Black textured finish
ELX118
18 INCH SUBWOOFER
•
•
•
•
•
Supplemental bass for ELX112 or ELX115
EVS-18K woofer for extended LF
35 Hz – 200 Hz frequency range
134 dB maximum SPL
Power handling: 400 W
continuous, 1600 W peak
• Braced 15 mm plywood enclosure
• Stack or pole-mount full-range boxes
• Black textured finish
42
POWERED 12 INCH TWO-WAY FULL-RANGE
ELX112 performance with self-amplification
50 Hz – 20 kHz frequency range
Lightweight, cool-running 1000 W Class D amp
Biamped with 24 dB/octave crossover
Transducer protection
Bypassable high-pass for external subwoofer
XLR, TRS, and RCA connections
Versatile gain, mixing, and processing controls
Pre- or post-mix parallel outputs
POWERED 15 INCH TWO-WAY FULL-RANGE
•
•
•
•
•
•
•
•
•
ELX118P
ELX115 performance with self-amplification
44 Hz – 20 kHz frequency range
Lightweight, cool-running 1000 W Class D amp
Biamped with 24 dB/octave crossover
Transducer protection
Bypassable high-pass for external subwoofer
XLR, TRS, and RCA input connections
Versatile gain, mixing, and processing controls
Pre- or post-mix parallel outputs
POWERED 18 INCH SUBWOOFER
•
•
•
•
•
•
•
ELX118 performance with self-amplification
EVS-18K woofer for extended LF
32 Hz – 130 Hz frequency range
Lightweight, cool-running 700 W Class D amp
Selectable normal/boost modes
XLR and TRS combo input
XLR parallel output
INSTALL
CONCERT
LOUDSPEAKERS
Live X
ELX215
•
•
•
•
•
90° x 50° coverage-pattern waveguide
137 dB maximum SPL
Power handling: 600 W continuous, 2400 W peak
Braced 15 mm plywood enclosure
Black textured finish
MOBILE AUDIO
• High-volume punch and
ultra-wide frequency response
• Ideal for mains
• Two EVS-15K woofers for extended LF
• 1.5 inch DH-1K titanium HF compression driver
• 38 Hz – 20 kHz frequency range
PORTABLE PA
DUAL 15 INCH TWO-WAY FULL-RANGE
See page 50 for Live X Covers.
ELX112
ELX112P
ELX115
ELX115P
Speaker Type
Full-range, two-way,
wedges
Full-range, two-way,
wedges
Full-range, mid-high,
two-way
Full-range, mid-high,
two-way
Frequency Response (-3 dB)
82 – 18,000 Hz
60 – 18,000 Hz
75 – 18,000 Hz
56 – 18,000 Hz
Frequency Range (-10 dB)
55 – 20,000 Hz
50 – 20,000 Hz
50 – 20,000 Hz
44 – 20,000 Hz
ELX118
ELX118P
ELX215
Subwoofer
Subwoofer
Full-range, mid-high,
two-way
50 – 100 Hz
42 – 100 Hz
62–18,000 Hz
35 – 200 Hz
32 – 130 Hz
38 – 20,000 Hz
Axial Sensitivity (SPL, 1 W/1 m) 94 dB
—
95 dB
—
100 dB
—
96 dB
Max. SPL/1m (calc)
132 dB Half Space
132 dB
134 dB Half Space
134 dB
134 dB
134 dB
137 dB
Recommended High-pass
Frequency
45 Hz
—
40 Hz
—
30 Hz
—
35 Hz
System Power Handling
(Continuous, Program, Peak)
250 W Continuous
1000 W Peak
—
400 W Continuous
1600 W Peak
—
400 W Continuous
1600 W Peak
—
600 W Continuous
2400 W Peak
Coverage (Nominal -6 dB)
HxV
90° x 50°
90° x 50°
90° x 50°
90° x 50°
Omnidirectional
Omnidirectional
90° x 50°
Power Rating
—
1000 W
—
1000 W
—
700 W
—
LF Transducer
12 in EVS-12K woofer
12 in EVS-12K woofer
15 in EVS-15K woofer 15 in EVS-15K woofer 18 in EVS-18K woofer
18 in EVS-18K woofer
15 in EVS-15K woofer
HF Transducer
DH-1K
DH-1K
DH-1K
DH-1K
—
—
DH-1K
Internal Crossover
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Nominal Impedance (Passive)
8Ω
8Ω
8Ω
8Ω
8Ω
8Ω
4Ω
Input Connections
Parallel Neutrik NL4
Parallel Neutrik NL4
Parallel Neutrik NL4
Parallel Neutrik NL4
Parallel Neutrik NL4
Parallel Neutrik NL4
Parallel Neutrik NL4
Woofer Size
12 in (304.8 mm)
12 in (304.8 mm)
15 in (381 mm)
15 in (381 mm)
18 in (457.2 mm)
18 in (457.2 mm)
15 in (381 mm)
Dimensions (H x W x D)
23.9 x 14.25 x 13.39 in 23.9 x 14.25 x 13.39 in 27.87 x 17.01 x 15.04 in 27.87 x 17.01 x 15.04 in 26.02 x 19.96 x 22.6 in 26.02 x 19.96 x 22.6 in 45.43 x 17.01 x 19.72 in
(607 x 362 x 340 mm) (607 x 362 x 340 mm) (708 x 432 x 382 mm) (708 x 432 x 382 mm) (661 x 507 x 574 mm) (661 x 507 x 574 mm) (1154 x 432 x 501 mm)
Net Weight
35.27 lb (16.0 kg)
37.04 lb (16.8 kg)
48.28 lb (21.9 kg)
49.6 lb (22.5 kg)
67.46 lb (30.6 kg)
69 lb (31.3 kg)
89.73 lb (40.7 kg)
43
LOUDSPEAKERS
CONCERT
Electro-Voice condenses decades of proven pro audio
engineering know-how into ZLX, its next generation of highperformance portable loudspeakers. Available in powered
and passive 12 inch and 15 inch two-way versions, ZLX
was designed with a singular goal: to deliver best-in-class
performance across every detail. No other comparably
priced loudspeaker sounds better or gives you more control
over your sound. ZLX powered models match the legendary
INSTALL
ZLX-12P
quality of EV-engineered drivers with a custom-built 1000
W Class-D amplifier module and feature an LCD display
and innovative one-knob DSP control with presets so you
can quickly optimize loudspeaker performance according to
your performance style and space. Whether used as mains
or monitors, ZLX will enhance your gig with incredible sonic
impact and intelligibility – the renowned ''EV Sound" the
pros trust.
12 INCH TWO-WAY POWERED LOUDSPEAKER
PORTABLE PA
• Compact and lightweight
• Standout choice for sound reinforcement
or stage-monitoring
• 12 inch woofer for low-end punch
in a compact enclosure
• LCD display and one-knob DSP control
with presets for precise, speedy set up
• Input level meters and independent amplifier
control to ensure optimal gain structure
MOBILE AUDIO
ZLX-15P
• Front LED for "power on" and "limit" indication
• 1.5 inch high-frequency titanium compression driver
• Durable composite construction with innovative
hi/lo grip design for easy pole mounting
• Patented split-baffle design for
superior drive time alignment
• 1000 W Class D amplifier, biamped
• 126 dB maximum SPL
• 50 Hz – 20 kHz frequency range
15 INCH TWO-WAY POWERED LOUDSPEAKER
• Crisp clean highs and tight, deep lows for larger spaces
• 15 inch woofer for extended low frequency response
• LCD display and one-knob DSP control
with presets for precise, speedy set up
• Input level meters and independent amplifier
control to ensure optimal gain structure
• Front LED for "power on" and "limit" indication
• 1.5 inch high-frequency titanium compression driver
• Durable composite construction with innovative
hi/lo grip design for easy pole mounting
• Patented split-baffle design for
superior drive time alignment
• 1000 W Class D amplifier, biamped
• 127 dB maximum SPL
• 42 Hz – 20 kHz frequency range
LCD DISPLAY AND ONE-KNOB DSP CONTROL
VISUAL CONTROL AND MONITORING WITH PRESETS
In the case of the ZLX's uncluttered control panel, less really does mean more. Though
the multiple dials and switches on other loudspeaker input panels may suggest
more functionality, ZLX's powerful DSP engine – accessed by a clean single-knob
design with LCD design – actually offers the most comprehensive, precise, and userconfigurable control available at its price point. LCD display allows for application and
location EQ optimization. Set ZLX for music playback, live sound, or spoken word and
hear the difference in seconds. Smart design, straightforward operation.
44
ZLX
ZLX-12
12 INCH TWO-WAY PASSIVE LOUDSPEAKER
ZLX-15
• 55 Hz – 20 kHz frequency range
• 250 W continuous and 1000 W peak power handling
• 95 dB SPL sensitivity; 125 dB maximum SPL
LOUDSPEAKERS
• 12 inch woofer for low-end punch
in a compact enclosure
• 1.5 inch high-frequency titanium compression driver
• Durable composite construction with innovative
hi/lo grip design for easy pole mounting
• Patented split-baffle design for
superior drive time alignment
• 250 W continuous and 1000 W peak power handling
• 96 dB SPL sensitivity; 126 dB maximum SPL
MOBILE AUDIO
PORTABLE PA
INSTALL
• 15 inch woofer for extended low frequency response
• 1.5 inch high-frequency titanium compression driver
• Durable composite construction with innovative
hi/lo grip design for easy pole mounting
• Patented split-baffle design for
superior drive time alignment
• 44 Hz – 20 kHz frequency range
CONCERT
15 INCH TWO-WAY PASSIVE LOUDSPEAKER
See page 50 for ZLX Covers.
ZLX-12P
ZLX-15P
ZLX-12
Speaker Type
Two-way, powered
Two-way, powered
Two-way, passive
ZLX-15
Two-way, passive
Frequency Response
65 Hz – 18 kHz1
55 Hz – 18 kHz1
82 Hz – 18 kHz2
56 Hz – 18 kHz2
Frequency Range
50 Hz – 20 kHz1
42 Hz – 20 kHz1
55 Hz – 20 kHz
44 Hz – 20 kHz
Axial Sensitivity
—
—
95 dB
96 dB
Max. Measured SPL
126 dB
127 dB
125 dB
126 dB
Recommended High-pass Frequency
—
—
40 Hz
40 Hz
Power Handling
(Continuous, Peak)
—
—
250 W Continuous
1000 W Peak
250 W Continuous
1000 W Peak
Coverage (H x V)
90° x 60°
90° x 60°
90° x 60°
90° x 60°
Power Rating
1000 W
1000 W
—
—
LF Transducer
EVS-12K, 300 mm (12 in) woofer
EVS-15L, 380 mm (15 in) woofer
EVS-12K, 300 mm (12 in) woofer
EVS-15L, 380 mm (15 in) woofer
HF Transducer
DH-1K
DH-1K
DH-1K
DH-1K
Crossover Frequency
—
—
2.1 kHz
1.7 kHz
Nominal Impedance
—
—
8Ω
8Ω
Minimum Impedance
—
—
7Ω
7Ω
Connectors
Two XLR/TRS Combo Jack, one 3.5 mm Input, and one XLR link Output
Dual NL4
Dual NL4
Polypropylene
Polypropylene
Enclosure Material
Polypropylene
Polypropylene
Grille
18 ga steel with black powder coat
18 ga steel with black powder coat
18 ga steel with black powder coat
18 ga steel with black powder coat
Dimensions (H x W x D)
24 x 14 x 14 in
(610 x 356 x 356 mm)
27 x 17 x 15 in
(685 x 423 x 383 mm)
24 x 14 x 14 in
(610 x 356 x 356 mm)
27 x 17 x 15 in
(685 x 423 x 383 mm)
Net Weight
34.3 lb (15.6 kg)
38.0 lb (17.3 kg)
32.8 lb (14.9 kg)
36.5 lb (16.6 kg)
1
Using MUSIC DSP preset.
2
Full Space Measurement, will have low frequency extension when mount on floor or wall.
45
RIGGING AND ACCESSORIES
XLC215 and XLD
B-1 GRID + XLC215 + AGCD + XLD LOUDSPEAKER
LOUDSPEAKERS
CONCERT
INSTALL
PORTABLE PA
MOBILE AUDIO
XLD281 XLD281 + CBEAM
XLD281
XLD281 + DOLLY
(One half of dolly shown in drawing)
46
Rigging and Accessories
CONCERT/PORTABLE RIGGING
XLCi
INSTALL RIGGING
CONCERT
LOUDSPEAKERS
XLC
B-2 Grid for XLCi
(other rigging hardware included with speaker)
(other rigging hardware included with speaker)
INSTALL
B-1 Grid for XLC
XLC and XLVC
GROUND STACK KITS
XGS-4
Xi-1082 UNDER BALCONY/ON-WALL MOUNT
FRi-2082 UNDER BALCONY/ON-WALL MOUNT
MOBILE AUDIO
PORTABLE PA
XGS-3
MB-1082: black
on-wall
The 100° x 100°
dispersion angle allows
the FRi-2082 to be
installed vertically on the
wall as well. Mounting
bracket comes with
FRi-2082.
47
Rigging and Accessories
EV INNOVATION
LOUDSPEAKERS
CONCERT
EVF and EVH Series
HRK AND VRK RIGGING KITS
(HRK not shown)
VRK-1
EVA, EVF, AND EVH
VRK-2
INSTALL
GLAND NUT COVER PLATES
PORTABLE PA
CDG
MOBILE AUDIO
Dual gland nut cover plate
EVA Rigging
EVA modules connect with an integrated internal top-to-bottom metal structure. Hidden by
cover panels, this nearly invisible rigging system gives an EVA cluster the aesthetic appeal of an
architectural element rather than a loudspeaker system. The rigging system is designed to carry an
array with a safety factor of greater than 8:1.
EVA-SG2 (Standard Grid)
EVA-EG2 (Extended Grid)
For typical tilt angles in 3 and
4 module arrays and pull-up
applications in large arrays when
extreme angles are required.
Includes one spreader bar.
For typical tilt angles in arrays
taller than four modules, or
extreme angles in arrays of four
modules or less. Includes one
spreader bar.
48
EVA-CG (Coupler Grid,
not shown)
Connects full-range modules
and single 15 inch subwoofers
so that you can fly the subs
without increasing trim height.
CDNL4
Dual NL4 cover plate
CSG
Single gland nut cover plate
Rigging and Accessories
EV INNOVATION ACCESSORIES
EVU-TK60
EV-Innovation Access Card
lets you test EVA, EVF, or EVH
transducers and protection
circuitry without disassembling
the cabinet.
TK-150
TRANSFORMER KIT
TRANSFORMER KIT
60-Watt, 70.7/100-Volt input
transformer for EVU systems,
with multiple taps.
EVU-CDNL4
COVER PLATE KIT
Dual NL4 cover plate for EVU
series only.
INSTALL
70/100 V transformer kit for EVF
and EVH.
LOUDSPEAKERS
ACCESS CARD
CONCERT
EVI-AC
EVI
EVI-12
Contains three 3/8-16
forged shoulder bolts.
EVI-15
"U" STYLE BRACKET
EVI-15MBB: black
EVI-15MBW: white
"U" STYLE BRACKET
PORTABLE PA
EBK-1 (EYEBOLT KIT)
EVI-12MBB: black
EVI-12MBW: white
EVI-28
MOBILE AUDIO
EVI Series
"U" STYLE BRACKET
EVI-28MBB: black
EVI-28MBW: white
The radius of action is 140°.
EVID
EVID 3.2, EVID 4.2, or EVID 6.2 + AB-ZE
49
Rigging and Accessories
S-40
WALL, CEILING, OR STAND MOUNT
Note: The thread diameter can be reduced
with a standard 5/8 inch screw adapter for
different mic stands.
S-40 MB/B: black
S-40 MB/W: white
LOUDSPEAKERS
Sx300 and SB122
CONCERT
1)
2)
1) MB 100
2) MB 100 + MB 200
Sx300
MB 300 B
Array-kit (2 plates)
black
Security advice:
When flown by 90° (figure 2),
do not use eyebolts only!
SB122
MB 300 W
Array-kit (2 plates)
white
INSTALL
Horizontal Cluster 120° (2 systems)
2 x MB 200 + 1 x MB 300 neccessary
Horizontal Cluster 180° (3 systems)
3 x MB 200 + 2 x MB 300 neccessary
PORTABLE PA
MOBILE AUDIO
Wall or Ceiling-Mount
1 x MB 200 neccessary
3/8 inch quick links
neccessary
Eyebolt
neccessary
Vertical Cluster
2 x MB 200 neccessary
Live X, ZLX, and ZXA1 Covers
Each cover is custom fit with access to the speaker handles.
50
Rigging and Accessories
ZX1
ZX1i + AB-ZE
CONCERT
LOUDSPEAKERS
ZX1 + TCA-ZX1
CB5
CLUSTER BRACKET KIT
VSA-1
EBK-3
FORGED M8 EYEBOLT KIT
HA-3 or HA-5
HANDLE MOUNT ADAPTER
VERTICAL STRONG-ARM MOUNT
MOBILE AUDIO
PORTABLE PA
MB3 or MB5 WALL/CEILING MOUNT BRACKET
INSTALL
ZX3 and ZX5
VSA-1 using TSA-1
SSK-1
SINGLE-STUD RIGGING KIT
Handle adapter
to be used with VSA-1
51
Designed for the most demanding applications in both
touring and installed sound, EV's ultra-reliable Tour Grade
amplifiers offer a unique combination of output power,
sonic excellence, and high efficiency, all in a compact,
lightweight format that's ideal for life on the road. Based
on grounded-bridge Class-H topology, Tour Grade amps
feature an integrated switch-mode power supply for
maximum power per pound, with plenty of headroom to
TG5
2000 W PER CHANNEL POWER AMPLIFIER
•
•
•
•
•
•
TG7
• Front LCD panel for operationmode setup and monitoring
• Slot for optional RCM-26 or RCM-28 IRISNet-compatible DSP and control module
• 11-level protection package
• Only 31.4 lb (14.2 kg)
High-power performance for top-level tours
Rugged, lightweight package
3500 W per channel (2 Ω)
Grounded-bridge Class-H design
Switch-mode power supply
Microprocessor-controlled
• Front LCD panel for operationmode setup and monitoring
• Slot for optional RCM-26 or RCM-28 IRISNet-compatible DSP and control module
• 11-level protection package
• Only 32 lb (14.5 kg)
REMOTE CONTROL INTERFACE FOR IRIS-NET
ELECTRONICS
•
•
•
•
52
High-level touring performance
Rugged, lightweight package
2000 W per channel (2 Ω)
Grounded-bridge Class-H design
Switch-mode power supply
Microprocessor-controlled
3500 W PER CHANNEL POWER AMPLIFIER
•
•
•
•
•
•
UCC1
handle transient peaks and low loads. The optional RCM26 remote control module adds state-of-the-art IRISNet-controlled DSP, including FIR-Drive loudspeaker
optimization, IIR filters, signal routing, level control,
dynamics, and system supervision. The optional RCM-28
module provides additional DSP options as well as the
revolutionary OMNEO Media Networking Architecture for
the most demanding applications.
USB-CAN converter for IRIS-Net enabled devices
Supports up to 100 CAN devices
Parallel CAN connections on RJ-45 Ethercons
USB-powered
• XLR jack for audio bus monitoring
• 19 inch rackmount panel included
• Status LED shows CAN activity and device status
Tour Grade Amplifiers
IRIS-NET REMOTE CONTROL MODULE FOR TOUR GRADE AMPLIFIERS
• Extend Tour Grade performance with
powerful DSP functionality
• Advanced FIR-Drive loudspeaker optimization
• High precision load impedance supervision
• Two GPI and two GPO ports
RCM-28
• One-button system test for fast, complete
check of connected cables and components
• Pilot tone detection for cable supervision
• Six recallable DSP/configuration presets
• Parallel RJ-45 CAN bus connectors
IRIS-NET REMOTE CONTROL MODULE FOR TOUR GRADE AMPLIFIERS
•
•
•
•
•
OMNEO Media Networking Architecture
Advanced FIR-Drive loudspeaker optimization
High precision load impedance supervision
Two GPI and two GPO ports
One-button system test for fast, complete
check of connected cables and components
• Pilot tone detection for cable supervision
• Dedicated Array EQ and Delay DSP
• Recallable DSP/configuration presets
TG5
TG7
RCM-26
RCM-28
Topology
Class-H grounded bridge
Class-H grounded bridge
—
—
Impedance
2Ω
8Ω
2Ω
4Ω
8Ω
—
—
Continuous Output/Channel (1 kHz, THD 1%) 2000 W 1450 W
4Ω
850 W
3500 W
2500 W
1500 W
—
—
Continuous Output/Channel
(20–20,000 Hz, THD < 0.2%)
—
1200 W
600 W
—
2100 W
1050 W
—
—
Maximum Bridged Output: 4, 8 Ω
—
3800 W 2900 W —
7000 W
5000 W
—
—
Amplifier Gain (Selectable)
39, 35, or 32 dB
41.5, 35, or 32 dB
—
—
Signal-to-Noise Ratio (A-weighted)
109 dB
111 dB
116 dB
120 dB
Total Harmonic Distortion
0.05%
0.05%
<0.005% (THD+Noise)
<0.002% (THD+Noise)
Intermodulation Distortion (SMPTE)
0.05%
0.05%
—
—
DIM 30
0.02%
0.02%
—
—
Slew Rate
30 V/μs
35 V/μs
—
—
Analog Inputs
Yes
Yes
Input Impedance (Balanced)
20 kΩ
20 kΩ
—
2 audio inputs on internal slot connector, pre-/post-fader selectable
—
Input Sensitivity (Selectable)
0, +6, +7 dBu
0, +6, +9 dBu
—
—
Digital Inputs
Optional (RCM-26 / RCM-28) Optional (RCM-26 / RCM-28)
A/D Conversion
See RCM-26 / RCM-28
See RCM-26 / RCM-28
24 Bit linear, Sigma-Delta, 128x oversampling
D/A Conversion
See RCM-26 / RCM-28
See RCM-26 / RCM-28
24 Bit linear, Sigma-Delta, 128x oversampling
AES3 (AES/EBU) format, XLR In/Thru connectors
Data Format
See RCM-26 / RCM-28
See RCM-26 / RCM-28
Internal Processing
See RCM-26 / RCM-28
See RCM-26 / RCM-28
2 DSPs (150 MHz, 300 MIPS)
24 Bit linear A/D and D/A conversion, 48 Bit processing
Dual Core DSP, 500 MIPS
Sample Rate
See RCM-26 / RCM-28
See RCM-26 / RCM-28
48 kHz
48 kHz
Sample Rate Conversion (SRC)
See RCM-26 / RCM-28
See RCM-26 / RCM-28
Network Control (IRIS-Net)
Optional (RCM-26 / RCM-28) Optional (RCM-26 / RCM-28) Yes
IRIS-Net control/OMNEO
Control Protocol
See RCM-26 / RCM-28
See RCM-26 / RCM-28
CAN Bus
OMNEO/OCA
CAN Bus Interface
See RCM-26 / RCM-28
See RCM-26 / RCM-28
10–500 kbaud, 2x RJ-45 (IRIS-Net Control)
GPIO Control Port
See RCM-26 / RCM-28
See RCM-26 / RCM-28
FIR-Drive
Optional (RCM-26 / RCM-28) Optional (RCM-26 / RCM-28) Yes
Yes
Power Supply
100–240 V, 50-60 Hz
100–240 V, 50-60 Hz
—
—
Power Consumption 1/8 max. output @ 4 Ω
1000 W
1450 W
—
—
Dimensions (H x W x D)
3.47 x 19 x 20.16 in
(88.1 x 482.6 x 512 mm)
3.47 x 19 x 20.16 in
(88.1 x 482.6 x 512 mm)
3.33 x 3.17 x 9.06 in
(84.7 x 80.4 x 230.3 mm)
3.33 x 3.17 x 9.06 in
(84.7 x 80.4 x 230.3 mm)
Net Weight
31.4 lb (14.2 kg)
32 lb (14.5 kg)
0.53 lb (240 g)
0.53 lb (240 g)
32 kHz – 192 kHz internal sample rate converter
Not required because of OCA support
1 x 6-pole Euroblock, 2 control inputs, 2 control outputs, (+5 V, 200 mA /GND)
ELECTRONICS
RCM-26
53
Built for the toughest tours and high-profile installations,
Precision series remote control amplifiers deliver superb
concert sound in a rugged package that stands up to the
rigors of the road. High-power Class-AB designs drive
your boxes as hard as you need to get full, clear coverage.
Ultra-low distortion keeps your sound clean even at
peak volumes with heavy loads. And road-ready design
features—dual power supplies, multiple fans, and complete
electronic protection circuitry—keep the show going while
P1200RL
850 W PER CHANNEL REMOTE CONTROL AMPLIFIER
•
•
•
•
P1200RT
Performance and control for tours and installation
850 W per channel (2 Ω)
Class-AB design
IRIS-Net enabled for remote control,
monitoring, and DSP processing
via included RCM-24 module
Performance and control for fixed installation
590 W per channel into 70/100 V line
Class-AB design
IRIS-Net enabled for remote control,
monitoring, and DSP processing
via included RCM-24 module
• Eight recallable DSP/configuration presets
• System check button for fast, complete test of all
connected cables and loudspeaker components
• Two GPI and two GPO ports
• Parallel RJ-45 CAN bus connectors
• Pilot tone detection for cable supervision
ELECTRONICS
1800 W PER CHANNEL REMOTE CONTROL AMPLIFIER
• High-power performance and
control, installed or on tour
• 1800 W per channel (2 Ω)
• Class-AB design
• IRIS-Net enabled for remote control, monitoring,
and DSP processing via included RCM-24 module
• Eight recallable DSP/configuration presets
54
• Eight recallable DSP/configuration presets
• System check button for fast, complete test of all
connected cables and loudspeaker components
• Two GPI and two GPO ports
• Parallel RJ-45 CAN bus connectors
• Pilot tone detection for cable supervision
590 W PER CHANNEL REMOTE CONTROL AMPLIFIER
•
•
•
•
P3000RL
safeguarding both your investment and your reputation.
Long a staple of top touring companies, Precision series
amplifiers are better than ever with the inclusion of the
RCM-24 module, which brings Precision series amps under
IRIS-Net control with state-of-the-art DSP technology.
Offering system supervision, signal routing, IIR filters, level
control, and dynamics, Precision series remote control
amplifiers set the standard for professional concert sound.
• System check button for fast, complete test of all
connected cables and loudspeaker components
• Two GPI and two GPO ports
• Parallel RJ-45 CAN bus connectors
• Pilot tone detection for cable supervision
Precision Series Remote Control Amplifiers
P3000RL
Class-AB
P1200RT
Class-AB
Class-AB
Impedance/Voltage
2Ω
4Ω
8Ω
2Ω
4Ω
8Ω
70 V
100 V
Continous Output/Channel (1 kHz, THD 1%)
850 W
600 W
380 W
1800 W
1300 W
850 W
580 W
590 W
Rated Output/Channel (20 - 20,000 Hz, THD < 0.2%) —
500 W
300 W
—
1200 W
750 W
500 W
500 W
Maximum Bridged Output (1 kHz, THD 1%)
—
1700 W
1200 W
—
3600 W
2600 W
—
—
Signal-to-Noise Ratio, Amplifier (A-weighted)
106 dB
109 dB
106 dB
Frequency Response (-1 dB)
20–20,000 Hz
20–20,000 Hz
45–20,000 Hz
THD @ Rated Output Power
<0.05%
<0.05%
<0.2%
<0.1%
Intermodulation (SMPTE)
<0.08%
<0.001%
<0.3%
<0.1%
<0.2%
DIM 30
<0.03%
<0.01%
<0.3%
Input Sensivity and Impedance
1.55 V (+6 dBu), 20 kΩ, XLR Input
1.55 V (+6 dBu), 20 kΩ, XLR Input
1.55 V (+6 dBu), 20 kΩ, XLR Input
Maximum Input Level
8.7 V (+21 dBu)
8.7 V (+21 dBu)
8.7 V (+21 dBu)
Dynamic Audio Limiter
THD </= 1% (Input signal </= + 20 dBu)
THD </= 1% (Input signal </= + 20 dBu)
THD </= 1% (Input signal </= + 20 dBu)
Serial Interface
ELECTRONICS
P1200RL
Topology
Network: CAN, 2 RJ-45 (CAT-5 Cabling), RS-232 for media control systems
Control Logic Inputs and Outputs
2 x 0 V, 5 V free configurable, Easy-Remote
2 x 0 V, 5 V free configurable, Easy-Remote
2 x 0 V, 5 V free configurable, Easy-Remote
Loudspeaker Connectors
Barrier strip
Speakon NL4
Barrier strip
Protections
High temperature, DC, HF, back EMF, peak current limiter, inrush current limiter, power-on delay
Cooling
Front-to-rear, three 4-stage fans
Front-to-rear, three 4-stage fans
Front-to-rear, three 4-stage fans
Dimensions (H x W x D)
5.2 (3RU) x 19 x 15.4 in
(132.5 x 483 x 390 mm)
5.2 (3RU) x 19 x 15.4 in
(132.5 x 483 x 390 mm)
5.2 (3RU) x 19 x 15.4 in
(132.5 x 483 x 390 mm)
Net Weight
37.5 lb (17 kg)
66.2 lb (30 kg)
55.1 lb (25 kg)
55
Building on a legacy of power and performance,
Q Series amps take Electro-Voice’s unique amplifier
philosophy to a new level of efficiency and value. The
Q series achieves superb audio performance because
it's designed for superior dynamic headroom and transient
response, resulting in 30% greater output capability for
short-duration signals. High-power Q99 and Q1212
models use sophisticated Class-H topology that
dramatically reduces heat and cuts energy consumption
by up to 50%, yielding racks that are easier to power and
Q44-II
easier to cool. Smaller Q44 and Q66 models are based
on the proven Class-AB designs of EV’s referencestandard Precision series. All models incorporate dynamic
limiting to prevent dangerous output clipping, as well as
extensive protections against thermal damage and electrical
malfunction. Combining Class-H innovation with Class-AB
sonic excellence and robustness, the compact, affordable
Q Series is the ideal amplifier line for all sizes of clubs,
concerts, performance centers, and sports venues.
650 W PER CHANNEL POWER AMPLIFIER
• Outstanding value and performance
for club and mobile systems
• Dynamic headroom for all real-world applications
• 650 W per channel (2 Ω)
• Class-AB design
• XLR pass-though input connections
• Easy connection to biamped loudspeakers
Q66-II
900 W PER CHANNEL POWER AMPLIFIER
• Outstanding value and performance
for clubs, mobile, and more
• Dynamic headroom for all real-world applications
• 900 W per channel (2 Ω)
• Class-AB design
• XLR pass-though input connections
• Easy connection to biamped loudspeakers
ELECTRONICS
Q99
• Switchable LPN filter for extra tonal
fundamentals and "kick"
• Protective low-cut for systems without subwoofers
• Built-in dynamic limiters
• Complete protection package
• 3-stage front-to-rear fans
1250 W PER CHANNEL CLASS-H POWER AMPLIFIER
•
•
•
•
•
•
56
• Switchable LPN filter for extra tonal
fundamentals and "kick"
• Protective low-cut for systems without subwoofers
• Built-in dynamic limiters
• Complete protection package
• 3-stage front-to-rear fans
High-efficiency power and performance
Innovative Class-H design
1250 W per channel (2 Ω)
Dynamic headroom for all real-world applications
XLR pass-though input connections
Easy connection to biamped loudspeakers
• Switchable LPN filter for extra tonal
fundamentals and "kick"
• Protective low-cut for systems without subwoofers
• Built-in dynamic limiters
• Complete protection package
• 3-stage front-to-rear fans
Q Series Amplifiers
1800 W PER CHANNEL CLASS-H POWER AMPLIFIER
•
•
•
•
•
•
Super-efficient power with outstanding performance
Innovative Class-H design
1800 W per channel (2 Ω)
Dynamic headroom for all real-world applications
XLR pass-though input connections
Easy connection to biamped loudspeakers
• Switchable LPN filter for extra tonal
fundamentals and "kick"
• Protective low-cut for systems without subwoofers
• Built-in dynamic limiters
• Complete protection package
• 3-stage front-to-rear fans
Q44-II
Q66-II
Q99
Q1212
Topology
Class-AB
Class-AB
Class-H
Class-H
Impedance
2Ω
4Ω
8Ω
2Ω
4Ω
8Ω
2Ω
4Ω
8Ω
2Ω
4Ω
Continuous Output Power(1 kHz, THD 1%)
650 W
450 W
270 W
900 W
600 W
380 W
1250 W
900 W
550 W
1800 W
1200 W
750 W
Continuous Output Power(20 - 20,000 Hz, THD
—
< 0.2%)
400 W
200 W
—
500 W
250 W
—
800 W
400 W
—
1100 W
550 W
Maximum Bridged Output
—
1300 W
900 W
—
1800 W
1200 W
—
2800 W
1800 W
—
3600 W
2400 W
Amplifier Gain
32 dB
32 dB
32 dB
32 dB
Frequency Response
10 Hz – 40 kHz (±1 dB)
10 Hz – 40 kHz (±1 dB)
10 Hz – 40 kHz (±1 dB)
10 Hz – 40 kHz (±1 dB)
Signal-to-Noise Ratio (A-weighted)
106 dB
107 dB
109 dB
110 dB
Total Harmonic Distortion
0.03%
0.03%
0.03%
0.03%
Intermodulation Distortion (SMPTE)
0.1%
0.1%
0.1%
0.1%
DIM 30
0.05%
0.05%
0.05%
0.05%
Input Impedance (Balanced)
20 kΩ
20 kΩ
20 kΩ
20 kΩ
Input Sensitivity
+2.2 dBu
+3.1 dBu
+5.1 dBu
+6.6 dBu
Maximum Input Voltage
+21 dBu (8.69 Vrms)
+21 dBu (8.69 Vrms)
+21 dBu (8.69 Vrms)
+21 dBu (8.69 Vrms)
Slew Rate
25 V/μs
26 V/μs
27 V/μs
30 V/μs
Network Control (IRIS-Net)
No
No
No
No
Protections
8Ω
ELECTRONICS
Q1212
Audio limiters, high temperature, DC, HF, back EMF, peak current limiters, inrush current limiters, turn-on delay
Cooling
Front-to-rear, 3-stage fans
Front-to-rear, 3-stage fans
Front-to-rear, 3-stage fans
Front-to-rear, 3-stage fans
Dimensions (H x W x D)
3.47 x 19 x 16.63 in
(483 x 88.1 x 421.5 mm)
3.47 x 19 x 16.59 in
(483 x 88.1 x 421.5 mm)
3.47 x 19 x 16.59 in
(483 x 88.1 x 421.5 mm)
3.47 x 19 x 16.59 in
(483 x 88.1 x 421.5 mm)
Net Weight
27.78 lb (12.6 kg)
32.63 lb (14.8 kg)
35.94 lb (16.3 kg)
39.02 lb (17.7 kg)
57
Contractor Precision Series amplifiers combine top-quality
performance and reliability with innovative designs
perfectly tailored to the needs of professional sound
installation. Available in 2RU configurations of up to eight
channels, CPS amps are compact and efficient to operate,
with every detail thought through from the contractor's
point of view. For fast installation and setup, each model
features Phoenix-type input and output connectors,
programmable power-on delay, remote power-on/off,
rear-mounted attenuators, and switchable high-pass
UNIQUE FLEXIBILITY THROUGH VLD
The ability to switch individually the mode of each power
amp channel helps the DSA multi-channel power amplifiers
to achieve a degree of flexibility never before possible. In low
impedance operation (2 Ω, 4 Ω, 8 Ω), each channel can drive
up to four 8 Ω loudspeaker cabinets. The output channels
can also be paired in bridged mode. Depending upon the
application, each channel can be switched individually even in
high-impedance mode (HZ) in order to drive 70 Vrms or 100
Vrms loudspeaker lines directly without an output transformer
(Direct Drive). The power output by the DSA multi-channel
power amplifiers is (along with its thermal capacity) limited
only by their maximum output voltage and maximum output
current, which means they can drive any load between 2 and
10 Ω with their rated maximum outputs of 500 W and 1000 W
respectively per channel.
CPS 2.4-II
filters. For worry-free dependability, there's full protection
against hazards, such as excessive heat, overloads, shorts,
DC, back EMF, and inrush current. And for the ultimate
in system control and supervision, the optional RCM-810
module enables the inclusion of CPS amps in IRIS-Net
networks of up to 250 devices. Offering exceptional ease,
flexibility, and audio performance, CPS series is the ideal
installation solution for cinema, club sound, commercial
sound/life safety, and performance and sports venues.
A corresponding encoder-circuit is provided on the rear panel. In addition, through VLD (Variable Load
Drive) in combination with a RCM-810 remote control module, it is possible to define freely which output
power should be made available at which load in the frame described above in the channel in question:
e.g. Channel A = 350 W into 2.6 Ω; Channel B = 500 W into 8 Ω, etc.
650 W PER CHANNEL POWER AMPLIFIER
ELECTRONICS
• Contractor-friendly performance and reliability
• 650 W per channel (2 Ω)
• Slot for optional RCM-810 module, allowing
IRIS-Net control and monitoring
• Rear-mounted attenuators
• Switchable 50 Hz high-pass filter
• Class-AB design
CPS 2.6-II
900 W PER CHANNEL POWER AMPLIFIER
• Contractor-friendly performance and reliability
• 900 W per channel (2 Ω)
• Slot for optional RCM-810 module, allowing
IRIS-Net control and monitoring
• Rear-mounted attenuators
• Switchable 50 Hz high-pass filter
• Class-AB design
58
• Complete protection: thermal, overload, shorts,
HF, DC, back EMF, and inrush current
• Phoenix-type input and output connections
• Remote power-on/off contact
• Programmable power-on delay settings
• 3-stage front-to-rear fans
• Complete protection: thermal, overload, shorts,
HF, DC, back EMF, and inrush current
• Phoenix-type input and output connections
• Remote power-on/off contact
• Programmable power-on delay settings
• 3-stage front-to-rear fans
CPS Contractor Precision Series Amplifiers
1250 W PER CHANNEL CLASS-H POWER AMPLIFIER
•
•
•
•
Power and efficiency for installations
Innovative Class-H design
1250 W per channel (2 Ω)
Slot for optional RCM-810 module, allowing
IRIS-Net control and monitoring
• Rear-mounted attenuators
• Switchable 50 Hz high-pass filter
CPS 2.12
1800 W PER CHANNEL CLASS-H POWER AMPLIFIER
•
•
•
•
Power and efficiency for installations
Innovative Class-H design
1800 W per channel (2 Ω)
Slot for optional RCM-810 module, allowing
IRIS-Net control and monitoring
• Rear-mounted attenuators
• Switchable 50 Hz high-pass filter
CPS 4.5
Four channels in one compact rack-efficient unit
500 W per channel
70/100 V operation for distributed systems
Class-D design for optimum efficiency
Slot for optional RCM-810 module, allowing
IRIS-Net control and monitoring
• IRIS-Net selection of each channel's
impedance (2–10 Ω in 0.1 Ω steps)
Four channels in one compact rack-efficient unit
1000 W per channel
70/100 V operation for distributed systems
Class-D design for optimum efficiency
Slot for optional RCM-810 module, allowing
IRIS-Net control and monitoring
• IRIS-Net selection of each channel's
impedance (2–10 Ω in 0.1 Ω steps)
• Rear-mounted attenuators
• Switchable 50 Hz high-pass filter (Hi-Z mode)
• Complete protection: thermal, overload, shorts,
HF, DC, back EMF, and inrush current
• Phoenix-type input and output connections
• Remote power-on/off contact
• Programmable power-on delay settings
• Front-to-rear fans
500 W PER CHANNEL 8-CHANNEL AMPLIFIER
•
•
•
•
•
Eight channels in one compact rack-efficient unit
500 W per channel
70/100 V operation for distributed systems
Class-D design for optimum efficiency
Slot for optional RCM-810 module, allowing
IRIS-Net control and monitoring
• IRIS-Net selection of each channel's
impedance (2–10 Ω in 0.1 Ω steps)
RCM-810
• Rear-mounted attenuators
• Switchable 50 Hz high-pass filter (Hi-Z mode)
• Complete protection: thermal, overload, shorts,
HF, DC, back EMF, and inrush current
• Phoenix-type input and output connections
• Remote power-on/off contact
• Programmable power-on delay settings
• Front-to-rear fans
1000 W PER CHANNEL 4-CHANNEL AMPLIFIER
•
•
•
•
•
CPS 8.5
• Complete protection: thermal, overload, shorts,
HF, DC, back EMF, and inrush current
• Phoenix-type input and output connections
• Remote power-on/off contact
• Programmable power-on delay settings
• 3-stage front-to-rear fans
500 W PER CHANNEL 4-CHANNEL AMPLIFIER
•
•
•
•
•
CPS 4.10
• Complete protection: thermal, overload, shorts,
HF, DC, back EMF, and inrush current
• Phoenix-type input and output connections
• Remote power-on/off contact
• Programmable power-on delay settings
• 3-stage front-to-rear fans
• Rear-mounted attenuators
• Switchable 50 Hz high-pass filter (Hi-Z mode)
• Complete protection: thermal, overload, shorts,
HF, DC, back EMF, and inrush current
• Phoenix-type input and output connections
• Remote power-on/off contact
• Programmable power-on delay settings
• Front-to-rear fans
ELECTRONICS
CPS 2.9
IRIS-NET REMOTE CONTROL MODULE FOR CPS SERIES AMPLIFIERS
• Enable powerful control and supervision capabilities
• Integrate up to 100 devices in each remote
control network, 250 with multiple networks
• Support for 2-, 4-, and 8-channel CPS models
• Freely programmable control inputs and outputs
• Load-monitoring for each channel
• Variable Load Drive for independent
channel impedance on 4- and 8-channel
amps (2–10 Ω in 0.1 Ω steps)
59
CPS Contractor Precision Series Amplifiers
ELECTRONICS
60
CPS 2.4-II
CPS 2.6-II
CPS 2.9
CPS 2.12
Topology
Class-AB
Class-AB
Class-H
Class-H
Impedance
2Ω
4Ω
8Ω
2Ω
4Ω
8Ω
2Ω
4Ω
8Ω
2Ω
4Ω
8Ω
Continuous Output Power(1 kHz, THD 1%) 650 W
450 W
270 W
900 W
600 W
380 W
1250 W
900 W
550 W
1800 W
1200 W
750 W
Continuous Output Power(20–20,000 Hz,
—
THD<0,2%)
400 W
200 W
—
500 W
250 W
—
800 W
400 W
—
1100 W
550 W
Maximum Bridged Output
—
1300 W
900 W
—
1800 W
1200 W
—
2800 W
1800 W
—
3600 W
2400 W
Amplifier Gain
32 dB
Frequency Response
10–40,000 Hz (±1 dB)
10–40,000 Hz (±1 dB)
10–40,000 Hz (±1 dB)
10–40,000 Hz (±1 dB)
Total Harmonic Distortion
0.03%
0.03%
0.03%
0.03%
Intermodulation Distortion (SMPTE)
0.1%
0.05%
0.1%
0.1%
DIM 30
0.05%
0.02%
0.05%
0.05%
Slew Rate
25 V/μs
26 V/μs
27 V/μs
30 V/μs
32 dB
32 dB
32 dB
Analog Inputs
2, electronically balanced, Phoenix-type 2, electronically balanced, Phoenix-type 2, electronically balanced, Phoenix-type 2, electronically balanced, Phoenix-type
Input Impedance (Balanced)
20 kΩ
20 kΩ
20 kΩ
20 kΩ
Input Sensitivity
2.2 dBu (1.0 V)
+3.1 dBu (1.11 Vrms)
+5.1 dBu (1.39 Vrms)
+6.6 dBu (1.66 Vrms)
Maximum Input Voltage
+21 dBu (8.69 Vrms)
+21 dBu (8.69 Vrms)
+21 dBu (8.69 Vrms)
+21 dBu (8.69 Vrms)
Crossover Type
Optional Modules
Optional Modules
Modular
Modular
Network Control (IRIS-Net)
Optional (RCM-810 card)
Optional (RCM-810 card)
Optional (RCM-810 card)
Optional (RCM-810 card)
CAN Bus Interface
Optional (RCM-810 card)
Optional (RCM-810 card)
Optional (RCM-810 card)
Optional (RCM-810 card)
Variable Load Drive (VLD)
No
No
No
No
Cooling
Front-to-rear, 3-stage fans
Front-to-rear, 3-stage fans
Front-to-rear, 3-stage fans
Front-to-rear, 3-stage fans
Dimensions (H x W x D)
3.47 x 19 x 16.59 in
(88.1 x 482.6 x 421.5 mm)
3.47 x 19 x 16.59 in
(88.1 x 482.6 x 421.5 mm)
3.47 x 19 x 16.59 in
(88.1 x 482.6 x 421.5 mm)
3.47 x 19 x 16.59 in
(88.1 x 482.6 x 421.5 mm)
Net Weight
13.23 lb (6 kg)
32.63 lb (14.8 kg)
35.94 lb (16.3 kg)
15.43 lb (7 kg)
CPS 4.10
CPS 4.5
CPS 8.5
Topology
Class-D
Class-D
Class-D
Impedance/Voltage
2Ω
4Ω
8Ω
8 Ω VLD 70V/100V 2 Ω
4Ω
8Ω
8 Ω VLD 70V/100V 2 Ω
4Ω
8Ω
8 Ω VLD 70V/100V
Continuous Power/Channel (1 kHz, THD 1%)
1000 W
1000 W
500 W
1000 W
500 W
250 W
500 W
500 W
500 W
250 W
500 W
500 W
1000 W
500 W
500 W
Continuous Power/Channel (20-20,000
Hz, THD < 0.3%)
900 W
900 W
450 W
900 W
900 W
450 W
450 W
225 W
450 W
450 W
450 W
450 W
225 W
450 W
450 W
Maximum Bridged Output
—
2000 W
2000 W
—
2000 W
—
1000 W
1000 W
—
1000 W
—
1000 W
1000 W
—
1000 W
Amplifier Gain
32 dB (Lo-Z), 33 dB (70 V), 36 dB (100 V)
32 dB (Lo-Z), 33 dB (70 V), 36 dB (100 V)
32 dB (Lo-Z), 33 dB (70 V), 36 dB (100 V)
Frequency Response
15–30,000 Hz
15–30,000 Hz
15–30,000 Hz
Signal-to-Noise Ratio, A-weighted (4 Ω)
103 dB
100 dB
100 dB
0.05%
Total Harmonic Distortion
0.05%
0.05%
Intermodulation Distortion (SMPTE)
0.05%
0.05%
DIM 30
0.02%
0.02%
0.02%
Slew Rate
28 V/μs
28 V/μs
28 V/μs
Analog Inputs
4, electronically balanced, Phoenix-type
4, electronically balanced, Phoenix-type
8, electronically balanced, Phoenix-type
Input Impedance (Balanced)
20 kΩ
20 kΩ
20 kΩ
Input Sensitivity
0 dBu (.775 V)-2 Ω, +3 dBu (1.1 V)-4/8 Ω, +6 dBu
(1.55) 70V/100V
0 dBu (.775 V)-2 Ω, +3 dBu (1.1 V)-4/8 Ω, +6 dBu
(1.55) 70V/100V
0 dBu (.775 V)-2 Ω, +3 dBu (1.1 V)-4/8 Ω, +6 dBu
(1.55) 70V/100V
Maximum Input Voltage
+22 (9.76 Vrms)
+22 (9.76 Vrms)
+22 (9.76 Vrms)
Network Control (IRIS-Net)
Optional (RCM-810 card)
Optional (RCM-810 card)
Optional (RCM-810 card)
CAN Bus Interface
Optional (RCM-810 card)
Optional (RCM-810 card)
Optional (RCM-810 card)
Variable Load Drive (VLD)
Yes
Yes
Yes
Cooling
Front-to-rear, continuously variable fans
Front-to-rear, continuously variable fans
Front-to-rear, continuously variable fans
Dimensions (H x W x D)
3.47 x 19 x 16.59 in (88.1 x 482.6 x 421.5 mm)
3.47 x 19 x 16.59 in (88.1 x 482.6 x 421.5 mm)
3.47 x 19 x 16.59 in (88.1 x 482.6 x 421.5 mm)
Net Weight
24.47 lb (11.1 kg)
24.47 lb (11.1 kg)
30.64 lb (13.9 kg)
Compact Precision amplifiers combine outstanding audio
performance with the highest-possible reliability and
safety to create an ideal high-power solution for touring
and rentals. Incorporating an innovative switchmode
power supply into Class-H technology, the CP series
delivers clean headroom that is far above stated nominal
output. This advanced design also results in improved
performance-to-weight ratio for easier touring, reduced
waste heat for closer rack spacing, and reduced power
1600 W PER CHANNEL CLASS-H POWER AMPLIFIER
•
•
•
•
•
•
CP4000S
•
•
•
•
Easy connection to biamped loudspeakers
Switch mode power supply
Built-in dynamic limiters
Complete protection: thermal, overload, shorts,
HF, DC, back EMF, and inrush current
• 3-stage front-to-rear fans
2100 W PER CHANNEL CLASS-H POWER AMPLIFIER
•
•
•
•
•
•
Topology
Advanced high-efficiency Class-H design
Ideal for demanding concerts and tours
Exceptional dynamic headroom
Rugged, compact, and lightweight
1600 W per channel (2 Ω)
XLR pass-though input connections
High power with advanced Class-H efficiency
Ideal for demanding concerts and tours
Exceptional dynamic headroom
Rugged, compact, and lightweight
2100 W per channel (2 Ω)
XLR pass-though input connections
•
•
•
•
Easy connection to biamped loudspeakers
Switch mode power supply
Built-in dynamic limiters
Complete protection: thermal, overload, shorts,
HF, DC, back EMF, and inrush current
• 3-stage front-to-rear fans
CP3000S
CP4000S
Class-H
Class-H
Impedance
2Ω
4Ω
8Ω
2Ω
4Ω
8Ω
Maximum power (1k Hz; THD <1%)
1600 W
1100 W
600 W
2100 W
1500 W
900 W
Rated power (20 Hz–20,000 Hz; THD < 0.2%)
—
900 W
450 W
—
1200 W
600 W
Maximum bridged output (1,000 Hz; < 1% THD)
—
3200 W
2200 W
—
4200 W
3000 W
Frequency Response (-1dB, ref. 1kHz)
15–40,000 Hz
15–40,000 Hz
Signal-to-noise ratio, A-weighted
107 dB
108 dB
Total harmonic distortion
<0.05%
<0.05%
Intermodulation distortion (SMPTE)
<0.02%
<0.02%
Slew rate
35 V/μs
35 V/μs
Input impedance (balanced)
20 kΩ
20 kΩ
Crosstalk (at 1,000 Hz)
<-80 dB
<-80 dB
Dimensions (W x H x D)
19 x 3.5 x 15.22 in (483 x 88.1 x 384 mm)
19 x 3.5 x 15.5 in (483 x 88.1 x 384 mm)
Net weight
17.97 lb (8.15 kg)
19.18 lb (8.70 kg)
ELECTRONICS
CP3000S
consumption for enhanced energy efficiency. A complete
set of protection circuitry guards people and equipment
against hazardous conditions, and a rigid, robust chassis,
built to the highest precision manufacturing standards,
ensures dependable operation on even the most grueling
tours. With exceptionally clean power and tour-friendly
touches that facilitate fast, flexible setup, Compact
Precision amplifiers fulfill even the most demanding
requirements of pro audio touring.
61
The PA Series of commercial power amplifiers is a
favorite of installers everywhere for sound reinforcement,
background music, paging, and public address systems.
Featuring low-distortion amplifier electronics that are
bridgeable for flexible power allocation, PA Series amps
provide a wide dynamic range with excellent headroom.
An onboard limiter spares both amplifier and speakers
from damaging transients, and a comprehensive
thermal/electrical protection package ensures long-haul
dependability. Equipped with Phoenix-style terminals for
PA1250T
fast, easy hookup, PA Series amps are housed in compact,
rack-ready 2RU chassis with ample internal airflow and
exceptionally quiet multi-stage fans. Models are available
in a variety of output powers and channel configurations,
several of which provide 70 V/100 V output using lowdistortion transformers. Offering outstanding versatility and
long-term reliability, the PA Series is a remarkable value for
any installation application.
SINGLE-CHANNEL 250 W POWER AMPLIFIER
• Cool-running, saturation-free power
for distributed installations
• Ideal for sound reinforcement,
paging, and life safety
• 250 W mono for 70 V/100 V lines
• Compact 2RU design
• Stepped rear-panel level attenuation
PA2250T
•
•
•
•
•
•
Stepped rear-panel level attenuation
Selectable 50 Hz or 300 Hz high-pass filter
Thermal protection, peak limiting, turn-on delay
Phoenix-type inputs and outputs
3-stage front-to-rear fans
Integrated rack ears for direct mounting
ELECTRONICS
DUAL 400 W PER CHANNEL POWER AMPLIFIER
• Efficient performance for low
impedance or distributed systems
• Ideal for sound reinforcement,
paging, and life safety
• 400 W per channel for 4 Ω or 70 V/100 V lines
• Bridged mono out for 860 W into 8 Ω
• Compact 2RU design
62
Selectable 50 Hz or 300 Hz high-pass filter
Thermal protection, peak limiting, turn-on delay
Phoenix-type inputs and outputs
3-stage front-to-rear fans
Integrated rack ears for direct mounting
DUAL 270 W PER CHANNEL POWER AMPLIFIER
• Efficient performance for low
impedance or distributed systems
• Ideal for sound reinforcement,
paging, and life safety
• 250 W per channel for 4 Ω or 70 V/100 V lines
• Bridged mono out for 540 W into 8 Ω
• Compact 2RU design
PA2400T
•
•
•
•
•
•
•
•
•
•
•
Stepped rear-panel level attenuation
Selectable 50 Hz or 300 Hz high-pass filter
Thermal protection, peak limiting, turn-on delay
Phoenix-type inputs and outputs
3-stage front-to-rear fans
Integrated rack ears for direct mounting
PA Series Commercial Power Amplifiers
PA2450L
DUAL 450 W PER CHANNEL POWER AMPLIFIER
• Reliable high-quality power for installation
• Ideal for sound reinforcement,
paging, and life safety
• 450 W per channel for 4 Ω or 70 V/100 V lines
• Bridged mono out for 900 W into 8 Ω
• Compact 2RU design
• Stepped rear-panel level attenuation
PA4150L
•
•
•
•
•
Selectable 50 Hz or 300 Hz high-pass filter
Thermal protection, peak limiting, turn-on delay
Phoenix-type inputs and outputs
3-stage front-to-rear fans
Integrated rack ears for direct mounting
QUAD 150 W PER CHANNEL POWER AMPLIFIER
Flexible multi-channel power for installation
Ideal for sound reinforcement, paging, and life safety
150 W per channel into 4 Ω
Bridged mode for dual 315 W outputs into 8 Ω
Compact 2RU design
Stepped rear-panel level attenuation
•
•
•
•
•
Selectable 50 Hz or 300 Hz high-pass filter
Thermal protection, peak limiting, turn-on delay
Phoenix-type inputs and outputs
3-stage front-to-rear fans
Integrated rack ears for direct mounting
PA1250T
PA2250T
PA2400T
PA2450L
PA4150L
Number of Channels
1
2
2
2
4
Signal-to-Noise Ratio, A-weighted
103 dB
103 dB
Impedance/Voltage
70 V/100 V
4Ω
8Ω
70 V/100 V
4Ω
8Ω
70 V/100 V
4Ω
8Ω
4Ω
8Ω
Rated output power
(*rated load) THD <1%, 1 kHz
270 W
270 W
135 W
270 W
430 W
215 W
430 W
450 W
220 W
160 W
100 W
103 dB
104 dB
101 dB
Rated output power (*rated load) THD
<0.2%, 20 Hz – 20 kHz
250 W
250 W
125 W
250 W
400 W
200 W
400 W
400 W
200 W
150 W
75 W
Slew rate (V/μs) at 1 kHz
41/61
18
18
41/61
25
25
46/65
28
28
16
16
Frequency response -1 dB, ref. 1 kHz
65 Hz – 20 kHz
65 Hz – 40 kHz
65 Hz – 40 kHz
<10 Hz – 40 kHz
<10 Hz – 40 kHz
THD @ rated output power
MBW=80 kHz, 1 kHz
<0.1%
<0.1%
<0.1%
<0.1%
<0.1%
<0.1%
IMD-SMPTE 60 Hz, 7 kHz
<0.1%
<0.1%
<0.1%
<0.1%
DIM30 3.15 kHz, 1 5kHz
<0.1%
<0.1%
<0.1%
<0.1%
<0.1%
Input impedance, 20–20,000 Hz
>20 kΩ balanced
>20 kΩ
>20 kΩ
>20 kΩ
>20 kΩ
Input sensitivity @ rated output
power or voltage, 1 kHz
0 dBu (775 mV)
0 dBu (775 mV)
0 dBu (775 mV)
0 dBu (775 mV)
0 dBu (775 mV)
Crosstalk ref. 1 kHz, @ 10% rated
output power
<-75 dB
<-75 dB
<-75 dB
<-75 dB
<-75 dB
Dimensions (W x H x D)
19 x 3.5 x 16 in
19 x 3.5 x 16 in
(483 x 88 x 406 mm) (483 x 88 x 406 mm)
19 x 3.5 x 16 in
(483 x 88 x 406 mm)
19 x 3.5 x 16 in
(483 x 88 x 406 mm)
19 x 3.5 x 16 in
(483 x 88 x 406 mm)
Net Weight
36.34 lb (16.5 kg)
57.27 lb (26 kg)
36.34 lb (16.5 kg)
39.65 lb (18 kg)
51.76 lb (23.5 kg)
ELECTRONICS
•
•
•
•
•
•
63
The NetMax N8000 System Controller is a state-of-the-art
digital matrix system offering comprehensive management
of all aspects of professional sound reinforcement systems.
Supporting both distributed and central processing, NetMax
is a powerful physical complement to EV's IRIS-Net protocol,
which gives designers and end-users the industry’s most
flexible routing, DSP, and component-level system control
and supervision. EQ, crossovers, dynamics, FIR-Drive
loudspeaker optimization—NetMax does it all with superior
digital fidelity.
N8000
Each 2RU NetMax chassis supports up to 1900 MIPS
of processing power and up to 32 local audio channels. And
with NetMax's modular, field-configurable architecture, every
system can be tailored to current needs without being locked
out of future expansion. Designed for both installations and
touring systems, NetMax is an indispensable tool for concert
halls, houses of worship, hotels, casinos, convention centers,
sporting arenas, and stadiums. Simply put, there's no more
powerful, intelligent way to tame the complexity of modern
sound systems than NetMax.
NETMAX 300 MIPS DIGITAL MATRIX CONTROLLER
•
•
•
•
•
•
Full IRIS-Net supervision, control, and scheduling
Comprehensive 32-channel routing and mixing
Huge range of DSP filters, EQ, dynamics, and delays
FIR-Drive loudspeaker optimization
300 MIPS internal processing
Up to 1000 MIPS of processing
power available per unit
• 115 dB dynamic range for clean, quiet sound
DSP-1
N8000 300 MIPS DSP EXPANSION MODULE
•
•
•
•
•
DSP-2
Enhanced DSP power for NetMax controllers
Adds 1500 MIPS computing capacity
Easy field installation into chassis card slot
Three additional RAM banks (512 k x 24
bit) for delay lines up to 32.7 seconds
• Double-precision DSP algorithms
• Automatic configuration via IRIS-Net
with installation/removal notification
ELECTRONICS
Modular standard-mount keypads for NetMax
Convenient control for volume, source, presets, etc.
Up to three front units in a wall station
PWS-C connects front units to CAN bus
Easy daisy-chaining with included connection wire
•
•
•
•
Easy labeling, protected by transparent cover
Integrated status LEDs
Button and LED configuration via IRIS-Net
Customizable button behavior
(momentary, latching, or radio)
5.7” TOUCH PANEL
•
•
•
•
•
64
• Double-precision DSP algorithms
• Automatic configuration via IRIS-Net
with installation/removal notification
PROGRAMMABLE WALL STATIONS
•
•
•
•
•
TPI-5
Enhanced DSP power for NetMax controllers
Adds 300 MIPS computing capacity
Easy field installation into chassis card slot
48-bit signal processing
Two RAM banks (512 k x 24 bit) for
delay lines up to 21.8 seconds
N8000 1500 MIPS DSP EXPANSION MODULE
•
•
•
•
PWS-4 / -6 / -C
• Internal 48-bit processing for
outstanding audio fidelity
• Auto-compiling DSP engine with
ultra-low fixed latency
• Modular architecture with hardware expansion slots
• Fully-programmable analog and digital GPIO support
• Support for Ethernet, RS-232, USB, and CAN
• CobraNet and Dante audio networking options
Remote control and display
Massive, brushed aluminum front panel
Direct configuration with IRIS-Net software
Direct Ethernet connection
Shallow depth allows easy
mounting in walls and racks
• Noiseless operation and long life span
because of no fan and no HDD
• Convenient control for several functions like volume
control, source selection, preset or scene switching
• Freely programmable graphic user interface
• Client or project specific graphics
• Multi-user and multi-level access
• Password protection programmable
NetMax Digital Matrix System
NETMAX 8-CHANNEL ANALOG INPUT CARD
•
•
•
•
MI-1
Eight electronically balanced mic/line inputs
Euroblock connectors
48 V phantom power
Mic/line pad, selectable via IRIS-Net
Eight electronically balanced line-level outputs
Euroblock connectors
118 dB dynamic range for superior sonic quality
100 Ω output impedance
Eight channels of AES/EBU digital audio output
Four Euroblock output connectors
48 kHz sample rate
+21 dBu maximum output level
• Automatic configuration
• IRIS-Net notification of installation and removal
• On-board DSP (100 MIPS)
• Automatic configuration via IRIS-Net
with installation/removal notification
• On-board DSP (100 MIPS)
NETMAX COBRANET AUDIO NETWORK MODULE
• Connect NetMax to a CobraNet
digital audio network
• Two 100BASE-TX Ethernet interfaces (IEEE
802.3u compatible) for system redundancy
• 100 mbps data transmission rate
• Four serial ports each for input and output
for a total of up to 32 ins and 32 outs
DM-1
• Independent sample rate conversion for each input
• Lock indication LED
• On-board DSP (100 MIPS)
NETMAX 8-CHANNEL DIGITAL OUTPUT CARD
•
•
•
•
CM-1
Gain and level adjustable via IRIS-Net
Automatic configuration
IRIS-Net notification of installation and removal
On-board DSP (100 MIPS)
NETMAX 8-CHANNEL ANALOG OUTPUT CARD
•
•
•
•
DO-1
•
•
•
•
NETMAX 8-CHANNEL DIGITAL INPUT CARD
• Eight channels of AES/EBU or S/PDIF digital audio
• Four input connectors, Euroblock or TOSLINK optical
• Supports sample rates from 32–192 kHz
AO-1
• Automatic configuration
• IRIS-Net notification of installation and removal
• On-board DSP (100 MIPS)
NETMAX 8-CHANNEL ANALOG MIC/LINE INPUT CARD
•
•
•
•
DI-1
Eight electronically balanced line-level inputs
Euroblock connectors
20 kΩ input impedance
117 dB dynamic range for superior sonic quality
• 48 kHz sample rate and 16-, 20-,
or 24-bit word-length
• Control, monitoring, configuration, and
firmware updates via Ethernet
• Status LEDs for link, activity, fault, and
CobraNet conductor status
ELECTRONICS
AI-1
NETMAX DANTE AUDIO NETWORK MODULE
• Connect NetMax to a Dante digital audio network
• Transmit up to 32 ins and 32 outs at 48 kHz
sample rate and 16-, 20-, or 24-bit word-length
• Low latency (typically below 1 ms)
•
•
•
•
Two Gigabit Ethernet interfaces for system redundancy
Status LEDs for each interface
Dante Zen device-discovery
Compatible with Dante Virtual Soundcard
65
Proven in thousands of installations and live applications
around the world, EV delivers truly state-of-the-art DSP for
today's applications. EV's Dx46 sets the standard for digital
Dx46
loudspeaker controllers, providing 48-bit filter algorithms,
24-bit AD/DA conversion, and a dynamic range of 115 dB.
TWO-IN/SIX-OUT FIR-DRIVE SOUND SYSTEM PROCESSOR
• IRIS-Net software provides complete
control, monitoring, and supervision
• FIR-Drive loudspeaker optimization
• Analog and AES/EBU inputs
• Switchable -6 dB pre-A/D converter pad
• 24-bit AD/DA conversion
• 48-bit filter algorithms
• 115 dB dynamic range
• Ethernet and USB data interfaces
DC-One
•
•
•
•
•
Dedicated array EQ and delay sections
4 separate delay sections
5 contact closure inputs
60 factory presets, 30 user presets
Unique edit/compare mode for
audible parameter adjustment
• Full loudspeaker protection package, including
both Peak Anticipation and TEMP limiters
• Editor Software IRIS-Net
TWO-IN/SIX-OUT SOUND SYSTEM PROCESSOR
•
•
•
•
•
•
•
DC-One Editor Software control via USB port
Analog or AES/EBU Inputs
Switchable -6 dB pre-A/D converter pad
24-bit AD/DA conversion
32-bit Floating Point internal processing
111 dB dynamic range
Six predefined operation configurations
• Contact closure interface for
remote preset recall
• 60 factory presets, 20 user presets
• Unique edit/compare mode for
audible parameter adjustment
• Highly-customizable security settings
DC-One Editor Software PC-BASED EDITING SOFTWARE FOR DC-ONE
ELECTRONICS
• Easy connection to DC-One hardware via USB
• Detailed, real-time control and
supervision of DC-One hardware
• Intuitive user interface
• State-of-the-art graphics provide detailed,
easy-to-understand system overview
• Graphical navigation and block diagrams provide
easy access to all functions and DSP sections
IRIS-Net Software
INTELLIGENT REMOTE INTEGRATED SUPERVISION
•
•
•
•
66
• Unique delay adjustment interface positions
components as they actually exist in space
• Selective lockout of front-panel access
protects settings from tampering
• Available as a free download at
www.electro-voice.com
Intelligent remote control software
Integrated system wide supervision function
Convenient sound system management
Comprehensive software solution for
• system configuration
• system operation
• system remote control
• system supervision
• Software suite for signal processors, matrixes,
networking, amplifiers and control devices
• Powerful logic function programming
via Task Engine programming module
• Freely programmable graphic user interfaces
• Client or project specific graphics
• Multi-user and multi-level access
• Password protection programmable
Dx46
DC-One
Analog Inputs (Electronically Balanced)
Two XLR, Two XLR THRU OUT
Two XLR, Two XLR THRU OUT
Analog Outputs (Electronically Balanced)
Six XLR
Six XLR
Digital Inputs
XLR AES/EBU (2-channel)
XLR AES/EBU (2-channel)
Maximum Input Voltage
8.7 V/+21 dBu (analog pad not engaged)
8.7 V/+21 dBu (analog pad not engaged)
Nominal Input Voltage
1.55 V/+ 6 dBu
1.23 V/+4 dBu
Input Impedance (Balanced)
10 kΩ
10 kΩ
Maximum Output Voltage
8.7 V/+21 dBu
8.7 V/+21 dBu
Nominal Output Voltage
1.55 V/+6 dBu
1.23 V/+4 dBu
Output Impedance (Balanced)
50 Ω
50 Ω
Frequency Response
20 Hz – 22 kHz (+/-0.5 dB)
10–22,000 Hz (±0.5 dB)
Dynamic Range
116 dB (A-weighted)
111 dB (unweighted, band limited 22–22,000 Hz)
THD+N
<0.002% (band limited 20–20,000 Hz)
<0.01% (band limited 22–22,000 Hz)
A/D Conversion
24-bit Delta Sigma
24-bit/Sigma-Delta (linear phase) 128 times oversampling
D/A Conversion
24-bit Delta Sigma
24-bit/Sigma-Delta 128 times oversampling
Data Format
24-bit
24-bit
Internal Processing
48-bit double precision
32-bit floating point
Sample Rate
48 kHz
48 kHz
Control Protocol
USB, Ethernet
Front-panel USB port
Dimensions (H x W x D)
1.74 x 19 x 14 in
(44.25 x 482.6 x 355.6 mm)
1.74 x 19 x 14 in
(44.25 x 482.6 x 355.6 mm)
Net Weight
10.14 lb (4.6 kg)
10.14 lb (4.6 kg)
ELECTRONICS
Sound System Processors
67
Bosch Communications Systems
Headquarters Europe, Middle-East & Africa
Bosch Sicherheitssysteme GmbH
Robert-Bosch-Ring 5 · 85630 Grasbrunn · Germany
© Bosch Security Systems, Inc. · Printed in Germany (F&W) · 7000/04/13
Art.Nr. 10000004 · Subject to change without prior notice!
Contact & Visitor Address
EVI Audio GmbH
Sachsenring 60 · 94315 Straubing · Germany
Tel: +49 9421 706 0 · Fax: +49 9421 706 265
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement