BLL8H0514L-130U datasheet

BLL8H0514L-130U datasheet
BLL8H0514L-130;
BLL8H0514LS-130
LDMOS driver transistor
Rev. 3 — 1 September 2015
Product data sheet
1. Product profile
1.1 General description
130 W LDMOS transistor intended for pulsed applications in the 0.5 GHz to 1.4 GHz
range.
Table 1.
Application information
Typical RF performance at Tcase = 25 C; IDq = 50 mA; in a class-AB application circuit.
Test signal
pulsed RF

VDS PL
Gp
RLin D
f
tp
(MHz)
(s) (%) (V)
(W) (dB) (dB) (%) (dB)
Pdroop(pulse)
tr
(ns) (ns)
tf
960 to 1215
128
10
50
130 19
10
54
0
15
8
1200 to 1400
300
10
50
130 17
10
50
0
15
8
1.2 Features and benefits








Easy power control
Integrated dual side ESD protection
High flexibility with respect to pulse formats
Excellent ruggedness
High efficiency
Excellent thermal stability
Designed for broadband operation (0.5 GHz to 1.4 GHz)
Compliant to Directive 2002/95/EC, regarding Restriction of Hazardous Substances
(RoHS)
1.3 Applications
 Amplifiers for pulsed applications in the 0.5 GHz to 1.4 GHz frequency range
BLL8H0514L(S)-130
LDMOS driver transistor
2. Pinning information
Table 2.
Pinning
Pin
Description
Simplified outline
Graphic symbol
BLL8H0514L-130 (SOT1135A)
1
drain
2
gate
3
source
1
1
[1]
2
3
3
sym112
2
BLL8H0514LS-130 (SOT1135B)
1
drain
2
gate
3
source
1
1
[1]
2
3
3
sym112
2
[1]
Connected to flange.
3. Ordering information
Table 3.
Ordering information
Type number
Package
Name Description
Version
BLL8H0514L-130
-
flanged ceramic package; 2 mounting holes; 2 leads
SOT1135A
BLL8H0514LS-130
-
earless flanged ceramic package; 2 leads
SOT1135B
4. Limiting values
Table 4.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
VDS
Min
Max
Unit
drain-source voltage
-
100
V
VGS
gate-source voltage
6
+13
V
Tstg
storage temperature
65
+150
C
Tj
junction temperature
-
225
C
[1]
Conditions
[1]
Continuous use at maximum temperature will affect the reliability, for details refer to the on-line MTF
calculator.
BLL8H0514L-130_0514LS-130#3
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
2 of 13
BLL8H0514L(S)-130
LDMOS driver transistor
5. Thermal characteristics
Table 5.
Thermal characteristics
Symbol
Parameter
Conditions
Zth(j-c)
transient thermal impedance from
junction to case
Tcase = 85 C; PL = 130 W
Typ
Unit
tp = 100 s;  = 10 %
0.17
K/W
tp = 200 s;  = 10 %
0.22
K/W
tp = 300 s;  = 10 %
0.25
K/W
tp = 100 s;  = 20 %
0.23
K/W
tp = 1 ms;  = 10 %
0.36
K/W
6. Characteristics
Table 6.
DC characteristics
Tj = 25 C; per section unless otherwise specified.
Symbol Parameter
Conditions
Min
Typ Max
Unit
V(BR)DSS drain-source breakdown voltage
VGS = 0 V; ID = 630 mA
100
-
-
V
VGS(th)
gate-source threshold voltage
VDS = 10 V; ID = 135 mA
1.3
1.8
2.25
V
IDSS
drain leakage current
VGS = 0 V; VDS = 50 V
-
-
1.4
A
IDSX
drain cut-off current
VGS = VGS(th) + 3.75 V;
VDS = 10 V
15.8 18
-
A
nA
IGSS
gate leakage current
VGS = 11 V; VDS = 0 V
-
-
140
gfs
forward transconductance
VDS = 10 V; ID = 135 mA
806
-
1578 mS
RDS(on)
drain-source on-state resistance
VGS = VGS(th) + 6.25 V;
ID = 135 mA
-
200 275
m
Table 7.
RF characteristics
Test signal: pulsed RF; tp = 300 s;  = 10 %; RF performance at VDS = 50 V; IDq = 50 mA;
f = 1.2 GHz to 1.4 GHz; Tcase = 25 C; unless otherwise specified, in a class-AB production
test circuit.
Symbol
Parameter
Conditions
Min Typ Max Unit
VDS
drain-source voltage
PL = 130 W
-
-
50
V
Gp
power gain
PL = 130 W
15
17
-
dB
RLin
input return loss
PL = 130 W
-
10
7
dB
D
drain efficiency
PL = 130 W
45
50
-
%
Pdroop(pulse)
pulse droop power
PL = 130 W
-
0
0.3
dB
tr
rise time
PL = 130 W
-
20
50
ns
tf
fall time
PL = 130 W
-
6
50
ns
BLL8H0514L-130_0514LS-130#3
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
3 of 13
BLL8H0514L(S)-130
LDMOS driver transistor
7. Application information
7.1 Ruggedness in class-AB operation
The BLL8H0514L-130 and BLL8H0514LS-130 are capable of withstanding a load
mismatch corresponding to VSWR = 5 : 1 through all phases under the following
conditions: VDS = 50 V; IDq = 50 mA; PL = 130 W; f = 1.2 GHz to 1.4 GHz; tp = 300 s;
 = 10 %.
7.2 Impedance information
Table 8.
Typical impedance
f
ZS
ZL
(MHz)
()
()
1200
1.21  j3.44
2.40  j0.63
1300
1.56  j4.49
2.30  j0.87
1400
2.21  j4.86
2.00  j1.71
drain
ZL
gate
ZS
001aaf059
Fig 1.
Definition of transistor impedance
BLL8H0514L-130_0514LS-130#3
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
4 of 13
BLL8H0514L(S)-130
LDMOS driver transistor
7.3 Performance curves
001aam262
20
Gp
(dB)
ηD
(%)
Gp
16
RLin
(dB)
50
16
12
40
12
8
30
8
4
20
4
ηD
0
1.15
1.25
0
1.15
10
1.45
1.35
001aam263
20
60
1.25
1.35
f (GHz)
VDS = 50 V; IDq = 50 mA; tp = 300 s;  = 10 %.
Fig 2.
Power gain and drain efficiency as function of
frequency; typical values
VDS = 50 V; IDq = 50 mA; tp = 300 s;  = 10 %.
Fig 3.
001aam264
20
1.45
f (GHz)
Gp
(dB)
Input return loss as a function of frequency;
typical values
001aam265
60
ηD
(%)
16
50
(1)
(2)
(3)
12
40
8
30
4
(1)
(2)
(3)
20
0
10
0
40
80
120
160
0
40
PL (W)
120
160
PL (W)
VDS = 50 V; IDq = 50 mA; tp = 300 s;  = 10 %.
VDS = 50 V; IDq = 50 mA; tp = 300 s;  = 10 %.
(1) f = 1.2 GHz
(1) f = 1.2 GHz
(2) f = 1.3 GHz
(2) f = 1.3 GHz
(3) f = 1.4 GHz
(3) f = 1.4 GHz
Fig 4.
80
Power gain as a function of output power;
typical values
Fig 5.
Drain efficiency as a function of output power;
typical values
BLL8H0514L-130_0514LS-130#3
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
5 of 13
BLL8H0514L(S)-130
LDMOS driver transistor
001aam266
160
PL
(W)
120
80
(1)
(2)
(3)
40
0
0
1
2
3
4
Pi (W)
VDS = 50 V; IDq = 50 mA; tp = 300 s;  = 10 %.
(1) f = 1.2 GHz
(2) f = 1.3 GHz
(3) f = 1.4 GHz
Fig 6.
Output power as a function of input power; typical values
8. Test information
R2
C3
C9
C11
C8
C2
C1
C4
C10
C5
C13
C12
R1
C6
C7
001aam267
Printed-Circuit Board (PCB) material: Duroid 6006 with r = 6.15 and thickness = 0.64 mm.
See Table 9 for list of components.
Fig 7.
Component layout
BLL8H0514L-130_0514LS-130#3
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
6 of 13
BLL8H0514L(S)-130
LDMOS driver transistor
Table 9.
List of components
See Figure 7 for component layout.
Component
Description
Value
C1
multilayer ceramic chip capacitor
10 F, 50 V
Remarks
C2, C11
multilayer ceramic chip capacitor
1 nF
[1]
C3, C4, C6, C9, C10
multilayer ceramic chip capacitor
100 pF
[2]
C5, C7, C8
multilayer ceramic chip capacitor
43 pF
[2]
C12
electrolytic capacitor
220 F, 63 V
C13
multilayer ceramic chip capacitor
1 nF
[3]
fitted vertically in
series with R2
R1
SMD resistor
10 
SMD 0603
R2
wirewound lead resistor
2.61 , 0.25 W
fitted in series
with C13
[1]
American Technical Ceramics type 700A or capacitor of same quality.
[2]
American Technical Ceramics type 100A or capacitor of same quality.
[3]
American Technical Ceramics type 100B or capacitor of same quality.
BLL8H0514L-130_0514LS-130#3
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
7 of 13
BLL8H0514L(S)-130
LDMOS driver transistor
9. Package outline
Flanged ceramic package; 2 mounting holes; 2 leads
SOT1135A
D
A
F
D1
U1
B
q
C
c
1
H
p
U2
E1
w1
3
E
B
A
A
2
b
w2
C
0
5
mm
10 mm
scale
Dimensions
Unit(1)
Q
A
max 4.65
nom
min 3.76
b
c
D
D1
E
E1
F
H
p
Q
5.26
0.18 9.65 9.65 9.65 9.65 1.14
19.94
3.30
1.70
5.00
0.10 9.40 9.40 9.40 9.40 0.89
18.92
2.92
1.45
q
U1
U2
w1
w2
20.45 9.91
15.24
max 0.183 0.207 0.007 0.38 0.38 0.38 0.38 0.045 0.785 0.130 0.067
inches nom
0.6
min 0.148 0.197 0.004 0.37 0.37 0.37 0.37 0.035 0.745 0.115 0.057
0.25 0.51
20.19 9.65
0.805 0.39
0.01 0.02
0.795 0.38
Note
1. millimeter dimensions are derived from the original inch dimensions.
2. dimension is measured 0.030 inch (0.76 mm) from the body.
Outline
version
References
IEC
JEDEC
JEITA
Issue date
09-10-12
09-12-14
SOT1135A
Fig 8.
sot1135a_po
European
projection
Package outline SOT1135A
BLL8H0514L-130_0514LS-130#3
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
8 of 13
BLL8H0514L(S)-130
LDMOS driver transistor
Earless flanged ceramic package; 2 leads
SOT1135B
D
A
F
3
D1
D
U1
c
1
H
U2
E1
2
b
w2
D
0
Q
5
10 mm
scale
Dimensions
Unit(1)
A
b
c
E
E1
F
H
Q
U1
U2
5.26
0.18 9.65 9.65 9.65 9.65 1.14
19.94
1.70
9.91
9.91
5.00
0.10 9.40 9.40 9.40 9.40 0.89
18.92
1.45
9.65
9.65
max 0.183 0.207 0.007 0.38 0.38 0.38 0.38 0.045 0.785 0.067
inches nom
min 0.148 0.197 0.004 0.37 0.37 0.37 0.37 0.035 0.745 0.057
0.39
0.39
0.38
0.38
mm
E
max 4.65
nom
min 3.76
D
D1
w2
0.51
0.02
Note
1. millimeter dimensions are derived from the original inch dimensions.
2. dimension is measured 0.030 inch (0.76 mm) from the body.
Outline
version
References
IEC
JEDEC
JEITA
Issue date
09-10-12
09-12-14
SOT1135B
Fig 9.
sot1135b_po
European
projection
Package outline SOT1135B
BLL8H0514L-130_0514LS-130#3
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
9 of 13
BLL8H0514L(S)-130
LDMOS driver transistor
10. Handling information
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Observe precautions for handling
electrostatic sensitive devices.
Such precautions are described in the ANSI/ESD S20.20, IEC/ST 61340-5, JESD625-A or
equivalent standards.
11. Abbreviations
Table 10.
Abbreviations
Acronym
Description
ESD
ElectroStatic Discharge
LDMOS
Laterally Diffused Metal-Oxide Semiconductor
MTF
Median Time to Failure
SMD
Surface Mounted Device
VSWR
Voltage Standing-Wave Ratio
12. Revision history
Table 11.
Revision history
Document ID
Release date Data sheet status
Change notice Supersedes
BLL8H0514L-130_0514LS-130#3
20150901
-
Modifications:
Product data sheet
BLL8H0514L-130_0514LS-130
#2
•
The format of this document has been redesigned to comply with the new identity
guidelines of Ampleon.
•
Legal texts have been adapted to the new company name where appropriate.
BLL8H0514L-130_0514LS-130#2
20150209
Product data sheet
-
BLL8H0514L-130_0514LS-130#1
20140930
Objective data sheet -
BLL8H0514L-130_0514LS-130#3
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 3 — 1 September 2015
BLL8H0514L-130_0514LS-130
#1
-
© Ampleon The Netherlands B.V. 2015. All rights reserved.
10 of 13
BLL8H0514L(S)-130
LDMOS driver transistor
13. Legal information
13.1 Data sheet status
Document status[1][2]
Product status[3]
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
Definition
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.ampleon.com.
13.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Ampleon does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local Ampleon sales office. In
case of any inconsistency or conflict with the short data sheet, the full data
sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Ampleon and its customer, unless Ampleon and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be valid
in which the Ampleon product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
13.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, Ampleon does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. Ampleon takes no responsibility for
the content in this document if provided by an information source outside of
Ampleon.
In no event shall Ampleon be liable for any indirect, incidental, punitive,
special or consequential damages (including - without limitation - lost profits,
lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Ampleon’ aggregate and cumulative liability towards customer
for the products described herein shall be limited in accordance with the
Terms and conditions of commercial sale of Ampleon.
Right to make changes — Ampleon reserves the right to make changes to
information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Suitability for use — Ampleon products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical
systems or equipment, nor in applications where failure or malfunction of an
Ampleon product can reasonably be expected to result in personal injury,
death or severe property or environmental damage. Ampleon and its
suppliers accept no liability for inclusion and/or use of Ampleon products in
such equipment or applications and therefore such inclusion and/or use is at
the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Ampleon makes no representation
or warranty that such applications will be suitable for the specified use without
further testing or modification.
Customers are responsible for the design and operation of their applications
and products using Ampleon products, and Ampleon accepts no liability for
any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Ampleon product is suitable and
fit for the customer’s applications and products planned, as well as for the
planned application and use of customer’s third party customer(s). Customers
should provide appropriate design and operating safeguards to minimize the
risks associated with their applications and products.
Ampleon does not accept any liability related to any default, damage, costs or
problem which is based on any weakness or default in the customer’s
applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Ampleon products in order to
avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Ampleon does not accept any
liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — Ampleon products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.ampleon.com/terms, unless otherwise agreed in a valid written
individual agreement. In case an individual agreement is concluded only the
terms and conditions of the respective agreement shall apply. Ampleon
hereby expressly objects to applying the customer’s general terms and
conditions with regard to the purchase of Ampleon products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
BLL8H0514L-130_0514LS-130#3
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
11 of 13
BLL8H0514L(S)-130
LDMOS driver transistor
Non-automotive qualified products — Unless this data sheet expressly
states that this specific Ampleon product is automotive qualified, the product
is not suitable for automotive use. It is neither qualified nor tested in
accordance with automotive testing or application requirements. Ampleon
accepts no liability for inclusion and/or use of non-automotive qualified
products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without Ampleon’ warranty of the product for such
automotive applications, use and specifications, and (b) whenever customer
uses the product for automotive applications beyond Ampleon’ specifications
such use shall be solely at customer’s own risk, and (c) customer fully
indemnifies Ampleon for any liability, damages or failed product claims
resulting from customer design and use of the product for automotive
applications beyond Ampleon’ standard warranty and Ampleon’ product
specifications.
13.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
Any reference or use of any ‘NXP’ trademark in this document or in or on the
surface of Ampleon products does not result in any claim, liability or
entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of
the NXP group of companies and any reference to or use of the ‘NXP’
trademarks will be replaced by reference to or use of Ampleon’s own Any
reference or use of any ‘NXP’ trademark in this document or in or on the
surface of Ampleon products does not result in any claim, liability or
entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of
the NXP group of companies and any reference to or use of the ‘NXP’
trademarks will be replaced by reference to or use of Ampleon’s own
trademarks.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
14. Contact information
For more information, please visit:
http://www.ampleon.com
For sales office addresses, please visit:
http://www.ampleon.com/sales
BLL8H0514L-130_0514LS-130#3
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 3 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
12 of 13
BLL8H0514L(S)-130
LDMOS driver transistor
15. Contents
1
1.1
1.2
1.3
2
3
4
5
6
7
7.1
7.2
7.3
8
9
10
11
12
13
13.1
13.2
13.3
13.4
14
15
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General description . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Pinning information . . . . . . . . . . . . . . . . . . . . . . 2
Ordering information . . . . . . . . . . . . . . . . . . . . . 2
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2
Thermal characteristics . . . . . . . . . . . . . . . . . . 3
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Application information. . . . . . . . . . . . . . . . . . . 4
Ruggedness in class-AB operation . . . . . . . . . 4
Impedance information . . . . . . . . . . . . . . . . . . . 4
Performance curves . . . . . . . . . . . . . . . . . . . . . 5
Test information . . . . . . . . . . . . . . . . . . . . . . . . . 6
Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 8
Handling information. . . . . . . . . . . . . . . . . . . . 10
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Revision history . . . . . . . . . . . . . . . . . . . . . . . . 10
Legal information. . . . . . . . . . . . . . . . . . . . . . . 11
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 11
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Contact information. . . . . . . . . . . . . . . . . . . . . 12
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© Ampleon The Netherlands B.V. 2015.
All rights reserved.
For more information, please visit: http://www.ampleon.com
For sales office addresses, please visit: http://www.ampleon.com/sales
Date of release: 1 September 2015
Document identifier: BLL8H0514L-130_0514LS-130#3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement