0547690~Document~1
7. Security notes
Copyright @2010 by this company. No. Part of this publication may be reproduced,
The unit is only suitable for indoor use. The heat being generated in the unit has to
transmitted, transcribed, stored in a retrieval system or translated into any language
be removed via air circulation. Therefore the circulation vents at the housings must
or computer language, in any form or any means. Electronic, mechanical, magnetic,
not be covered with any objects.. Do not insert or drop anything into the air vents !
optical, chemical, manual or otherwise, without the prior written permission of this
This could result in a short-circuit. If the unit is used for purposes other than
company.
originally intended, if it is connected in the wrong way or not repaired by authorized
skilled personnel, there is no liability for possible damage. To cleaning only use a
dry, soft cloth, by no means chemicals or water. .If the unit is to be put out of
SAFETY INSTRUCTION
operation definitively, bring it to a local recycling plant for disposal.
1. Never push objects of any kind, or spill liquid of any kind into these products.
8. Technical Data
2. Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage points or other risk. Refer all servicing to
Screen Size
10.4” Diagonal
qualified service personnel, if any misuse mentioned above happened or any
Resolution
SVGA 800 X 600
accident dropping, miss-operations occurred.
Number of Colors
262,144 Colors
Pixel Pitch and Format 0.264 x 0.264
Page 1 of 6
Brightness
230 cd/㎡
Contrast Ratio
500:1
Operating Temp.
0℃ ~ 50℃
Storage Temp
-20℃ ~ +60℃
Backlight
CCFL
Viewing Angle
R/L 60deg, U/D 35/ 65 deg
Power Consumption
1.25A DC 12V
Video Input level
1.0Vpp ±0.5Vpp
Video Impedance
75Ω
PC Input
15pin D-Sub
Page 6 of 6
1.Contents :
5 Operation
01
1) Switch on the device with the Energy Saving Main Power.○
10.4” Monitor x 1
Power supply x 1
04 Power bottom.
2) Then turn the ○
Wall Mount Bracket x 2,
Panel Cut Dimension 1:1
05
3) Select the Video input Source ○
08
4) Adjust the Brightness with the ○
06 to select the Brightness, Contrast, and other
5) Please push OSD Control Menu ○
03 or ○
05 to get desired picture.
controls that you wish to change, then use ○
6 Application range
The LCD color monitors offer a sharp and high contrast display. They can be
universally applied, e.g. in surveillance systems, in reverse monitoring car systems or
marine bridge for multimedia applications, IP 65 Waterproof Rating
Fig. 1 Connectors and Controls
Page 5 of 6
Page 2 of 6
1) Connect the 12V DC into ○
09 , ( positive center)
2 . Installation
10
2) Connect the PC RGB input to○
11
3) Connect the S-Video source ○
12
4) Connector the CVBS ( Video source) to ○
4. Connections and operating Elements
Fig.2
Installation
Please use the Panel Cut Dimension Sheet to cut an 1:1 opening on where your wish
to install the monitor, then fasten the two brackets onto the wall, then fasten the
monitor on to bracket.
3. Connection
Fig. 4 Controls
○01
Fig.3 Connectors
Page 3 of 6
○02
Energy Saving Main Power.
○03 □+
Increase ( default to Brightness )
○05 □-
Decrease (default to Input Select)
○06
OSD Menu
○08
Brightness Control
○04
○07
Page 4 of 6
Auto
OSD Power on
LED Power Indicator
LM -1050
10.4” W aterproof M onitor
User’s M anual
Version 1.0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising