Quick Reference Guide (Download PDF, 1.82M)

Quick Reference Guide (Download PDF, 1.82M)
2015 Infiniti QX60
Hybrid
Quick Reference Guide
2
1
3
Behind
steering
wheel
4
5
6
22
Behind
steering
wheel
7
8
23
9
10
15
Behind
steering
wheel
16
12
13
11
24
25
14
26
17
18
19
20
21
27
1 I NSTRUMENT BRIGHTNESS
CONTROL SWITCHES*
15 D
YNAMIC DRIVER ASSISTANCE
CONTROL SWITCH*
ACKUP COLLISION INTERVENTION
2 B
(BCI) SWITCH*
16 T ILT/TELESCOPIC STEERING
WHEEL SWITCH*
3 TWIN TRIP ODOMETER RESET SWITCH*
17 H
EADLIGHT AIMING
CONTROL SWITCH*
4 VEHICLE INFORMATION DISPLAY
5 HEADLIGHT AND TURN SIGNAL SWITCH
6 EV INDICATOR LIGHT
7 LOW TIRE PRESSURE WARNING LIGHT
INDSHIELD WIPER AND
8 W
WASHER SWITCH
EHICLE INFORMATION
9 V
DISPLAY SWITCH
10 S
TEERING WHEEL SWITCHES FOR
AUDIO*/BLUETOOTH®/NAVIGATION
11 INTELLIGENT CRUISE CONTROL
12 V
EHICLE DYNAMIC CONTROL
(VDC) OFF SWITCH*
13 POWER LIFTGATE SWITCH
14 POWER LIFTGATE MAIN SWITCH
*See your Owner’s Manual for information.
18 WARNING SYSTEMS SWITCH
19 HEATED STEERING WHEEL SWITCH*
20 POWER INVERTER SWITCH
21 HOOD RELEASE*
22 CONTROL PANEL DISPLAY SCREEN*
23 CLIMATE CONTROL SYSTEM
24 AUDIO SYSTEM
25 F RONT PASSENGER AIR BAG
STATUS LIGHT*
26 POWER OUTLET
27 D
RIVER’S CLIMATE-CONTROLLED
SEAT SWITCH*
28 INFINITI DRIVE MODE SELECTOR*
29 P
ASSENGER’S CLIMATE-CONTROLLED
SEAT SWITCH*
28
29
table of contents
new system features
INFINITI Connection™ System (if so equipped) . . . . . . . . . . . . . . . . . . . . . 2
NavTraffic and NavWeather (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . 3
Around View® Monitor (AVM) with Moving Object Detection (MOD)
(if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Warning Systems Switch (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Approaching Vehicle Sound for Pedestrians (VSP) System . . . . . . . . . . . . . 6
essential information
Direct Response Hybrid Warning Light and Hybrid Awareness . . . . . . . . . . 7
Tire Pressure Monitoring System (TPMS) with Tire Inflation Indicator . . . . 7
Loose Fuel Cap and Fuel-filler Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Towing Your Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Accessing the Front Cup Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Front Armrest/Center Console Storage Box . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Clock Set/Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
first drive features
INFINITI Intelligent Key System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Power Liftgate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Power Seat Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2ND Row Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3RD Row Manual Reclining Seatback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Automatic Drive Positioner (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . 13
Outside Mirror Control Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Assist Charge Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Starting/Stopping the Hybrid System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Headlight Control Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Windshield Wiper and Washer Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Automatic Climate Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Rear Climate Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
FM/AM/SiriusXM® Satellite Radio with CD/DVD Player (if so equipped) . 19
USB (Universal Serial Bus) Connection Port/iPod® Interface . . . . . . . . . . 20
Conventional (Fixed Speed) Cruise Control . . . . . . . . . . . . . . . . . . . . . . . . . 20
Intelligent Cruise Control (ICC) System (if so equipped) . . . . . . . . . . . . . . 21
Power Outlets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
system guide
Vehicle Information Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Bluetooth® Hands-free Phone System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
System Operating Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Bluetooth® System without Navigation (if so equipped) . . . . . . . . . . . . . . 25
Bluetooth® System with Navigation (if so equipped) . . . . . . . . . . . . . . . . . 26
Navigation System (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Theater Package (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
HomeLink® Universal Transceiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Please see your Owner’s Manual for important safety information
and system operation limitations.
• A cellular telephone should not be used for any purpose while
driving so full attention may be given to vehicle operation.
• Always wear your seat belt.
• Supplemental air bags do not replace proper seat belt usage.
• Children 12 and under should always ride in the rear seat
properly secured in child restraints or seat belts according to
their age and weight.
• Do not drink and drive.
For more information, refer to the “Safety — Seats, seat belts and supplemental
restraint system (section 1)” the, “Monitor, climate, audio, phone and voice
recognition systems (section 4)” and the “Starting and driving (section 5)” of
your Owner’s Manual.
Additional information about your vehicle is also available in your Owner’s
Manual, Navigation System Owner’s Manual and at www.InfinitiUSA.com.
To view detailed
instructional videos, go to
www.infinitiownersinfo.mobi/2015/qx60
or snap this barcode with an
appropriate barcode reader.
new s y s te m f e a t u r e s
INFINITI Connection™ System* (if so equipped)
INFINITI Connection™ combines personalized convenience
and concierge settings and personal security features to
compliment the Total Ownership Experience. For more details
on INFINITI Connection or to enroll your vehicle, please
visit www.Infiniticonnection.com or call 855-444-7244.
Available services include:
I NFINITI Personal Assistant – To access INFINITI
Personal Assistant, select “Connect to Voice Menu” from the INFINITI Connection menu
or touch the
key on the map screen. At the voice prompt, say “INFINITI Personal
Assistant” to be connected.
• Your INFINITI Personal Assistant can send destination information directly to your vehicle.
Automatic Collision Notification – In case of air bag deployment, a signal is sent containing
the vehicle location and customer information to a Response Specialist who notifies the
proper authorities.
Emergency Call – This service provides emergency
assistance by connecting the subscriber to an
INFINITI Connection Specialist.
• In case of an emergency, press the in-vehicle
telematics SOS button 1 .
• A Response Specialist will provide assistance
based on the situation described by the
vehicle’s occupant.
1
E
nhanced Roadside Assistance – Roadside Assistance can be accessed by touching the
INFINITI Connection key on the Info menu, the
key on the map screen or by pressing
the SOS button 1 .
• This service allows subscribers to receive assistance for a non-emergency incident, such
as towing or a third party response.
• If warranted, Roadside Assistance may also be used in conjunction with the Emergency
Assistance service by pressing the SOS button 1 .
M
y Schedule – Access your personal online Google Calendar™, hear details read via
text-to-speech** and select a location as a destination via the Navigation System.
Report Stolen Vehicle – A Response Specialist will attempt to obtain location information
from a reported stolen vehicle and provide that information to local law enforcement
agencies to assist in the recovery of your stolen vehicle.
R
emote Door Lock/Unlock – Remotely access your vehicle via an INFINITI Connection
Response Specialist or designated website to remotely lock or unlock your vehicle.
A
larm Notification – This system will notify you when the factory-installed vehicle alarm
system has been activated.
*INFINITI Connection™ is only available on vehicles equipped with an optional INFINITI Connection™ subscription service.
**Laws in some communities may restrict the use of text-to-speech. Check local regulations before using this feature.
2
S
cheduled Maintenance Notification – Receive scheduled maintenance notifications
based on mileage data provided by your vehicle.
M
aintenance Alert – Receive notification of a vehicle system malfunction that triggers
instrument panel warning lights.
D
estination Assistance – Receive point-of-interest assistance via a guided IVR (Interactive
Voice Response) or Response Specialist by pressing the
key on the map screen or the
INFINITI Connection web portal.
D
estination Send-to-Vehicle – Find and download point-of interest information from
Google Maps™.
• To access, go to the INFINITI Connection menu and select “Sync All Information Feeds”.
Then go to the feeds menu page and download the desired destination information.
C
onnected Search – Select “Connected Search” from the Destination menu on the
vehicle’s Navigation System to conduct a point-of-interest search within a certain distance
of the vehicle’s location.
D
rive Zone – Monitor the movement of your vehicle within a specified region. Set up
boundaries in the Monitoring section of the INFINITI Connection web portal.
M
ax Speed Alert – Set up a maximum speed on the INFINITI Connection web portal. You
will receive notifications if your vehicle exceeds the maximum speed setting.
M
obile Information Service – Receive the latest news headlines, stock quotes and
sports scores by setting up preferences on the Mobile Information Service page in the
INFINITI Connection web portal.
Valet Alert – Use Valet Alert to set up a 0.2-mile radius around your vehicle.
• Activate alerts by pressing the “Connect to Voice Menu” button on the INFINITI
Connection screen or by pressing the
key on the map screen.
• At the prompt, say “Valet Alert” and then “Activate” or “Deactivate”.
For more information, refer to the “Viewing technical information (section 7)” of your Navigation System Owner’s Manual.
NavTraffic* and NavWeather* (if so equipped)
Your vehicle’s Navigation System is equipped with
NavTraffic and NavWeather capabilities.
NavTraffic enables your vehicle’s Navigation System
to display real-time traffic conditions, such as
accidents or road construction, and may provide a
detour to help avoid congestion.
NavWeather tracks nationwide weather information,
provides real-time weather reports and automatically
alerts you to severe weather conditions around your
current vehicle location.
*These features, SiriusXM® Satellite Radio, NavTraffic and NavWeather
require an active subscription. Multiple subscriptions may be necessary to
activate the various features.
For more information, refer to the “Monitor, climate, audio, phone and voice
recognition systems (section 4)” of your Owner’s Manual.
3
new s y s te m f e a t u r e s
Around View® Monitor (AVM) with Moving Object Detection (MOD)
(if so equipped)
With the ignition switch in the ON position, the
Around View® Monitor is activated by pressing the
CAMERA button 1 , located on the control panel, or
by moving the shift lever to the R (REVERSE) position.
The control panel displays various views of the
position of the vehicle.
1
When the shift lever is in the P (PARK), N (NEUTRAL)
or D (DRIVE) position and the CAMERA button 1 is
pressed, the following views will display in order:
Start from any Control Panel screen
Front view & bird’s-eye view
Press
Press
Press
Front view & front-side view
Front wide view
Press
When the shift lever is in the R (REVERSE) position and the CAMERA button 1 is pressed,
the following views will display in order:
Rear view & bird’s-eye view
Rear view & front-side view
Press
Rear wide view
Press
4
Press
The colored guide lines on the display screen indicate vehicle width and approximate
distances to objects with reference to the vehicle body line.
• Red 1.5 ft (0.5 m); Yellow 3 ft (1 m); Green 7 ft (2 m) and 10 ft (3 m).
There are some areas where the system will not show objects.
•When in the front or the rear view display, an
object below the bumper or on the ground may
not be viewed 2 .
•When in the bird’s-eye view, a tall object near
the seam of the camera viewing areas 3
will not appear in the monitor.
2
The distance between objects viewed on the
AVM differs from the actual distance.
Objects in the bird’s-eye view will appear further
than the actual distance.
3
MOVING OBJECT DETECTION (MOD)
If the MOD system detects moving objects
surrounding the vehicle, a yellow frame 1 will be
displayed on the camera image and a
chime sounds.
2
3
1
In the bird’s-eye view, a yellow frame is displayed
on those camera images (front, rear, right, left)
where moving objects are detected.
When the following are displayed:
4
•
Blue MOD icon 2 ; the system is operative in this view.
•
Gray MOD icon 3 ; the system is not operative in this view.
•
No MOD icon; the system is off.
To temporarily turn the system on or off, touch the MOD key 4 .
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your
Owner’s Manual.
5
new s y s te m f e a t u r e s
Warning Systems Switch (if so equipped)
T he warning systems switch 1 will turn on and
off the systems enabled in the vehicle information
display. The systems controlled by the warning
systems switch include:
1
• L ane Departure Warning (LDW) system
2
• Blind Spot Warning (BSW) system
• F orward Collision Warning (FCW) system
W
hen the warning systems switch is turned off, the indicator 2 on the switch is off. If the
warning systems switch is illuminated, the system is on. The indicator will also be off if all
of the warning systems are deactivated using the “Settings” menu.
To enable or disable these systems, perform the following operation:
• Press the
button 3 on the steering wheel
multiple times until you reach the
“Settings” menu.
• Press up or down on the button 4 , to select
the“Driver Assistance” 5 and “Driving Aids” 6
menu items.
•P
ress the ENTER button 4 to change a
menu item.
3
4
5
For more information, refer to the “Starting and driving (section 5)” of
your Owner’s Manual.
6
Approaching Vehicle Sound for Pedestrians (VSP) System
The VSP system helps alert pedestrians to the presence of the vehicle when it is being
driven at a low speed.
When the vehicle starts to move, it produces a sound. The sound stops when the vehicle
speed reaches approximately 19 mph (30 km/h) while accelerating.
This sound will activate again when decelerating to a speed less than 16 mph (25 km/h).
For more information, refer to the “HEV Overview (section HEV)” of your Owner’s Manual.
6
e s s e n t i a l i n f or mat ion
Direct Response Hybrid Warning Light
This light will illuminate when the ignition switch is in the ON position
and will extinguish when the hybrid system is started.
The light will also illuminate when a malfunction occurs in the
electric motor or hybrid system.
When this light illuminates while driving, immediately stop the vehicle in a safe location
and contact an INFINITI retailer.
If the hybrid system warning light blinks while driving, it may indicate that the Li-ion
battery charge is low and you cannot continue to drive.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
Hybrid Awareness
Your vehicle is virtually silent in the electric mode. If you exit your vehicle while it is ON
but the engine is not running, the engine will automatically start, informing you that the
car is still ON.
Do not store your INFINITI Intelligent Key within the detection range of the vehicle. This
may cause welcome lights and other functions to activate, creating unwanted battery drain.
The hybrid system is designed for optimum efficiency and performance. Activation of the
electric mode may vary with driving conditions and driver input. A full battery display does
not indicate the vehicle should be in the electric mode.
For more information, refer to the “HEV Overview (section HEV)” of your Owner’s Manual.
Tire Pressure Monitoring System (TPMS) with Tire Inflation Indicator
A Tire Pressure Low - Add Air warning message will
appear in the vehicle information display 1 and the
low tire pressure warning light 2 will illuminate when
one or more tires are low in pressure and air is needed.
1
• The tire pressures should be checked when the
tires are cold. The tires are considered cold after
the vehicle has been parked for 3 hours or more or
driven less than 1 mi (1.6 km) at moderate speeds.
When adding air to an under-inflated tire, the TPMS
with Tire Inflation Indicator provides visual and audible signals to help you
inflate the tire to the recommended COLD tire pressure.
2
To use the tire inflation indicator:
1.Move the shift lever to the P (PARK) position and apply the parking brake.
2. Place the ignition switch in the ON position. Do not start the engine.
3.Add air to the under-inflated tire, and within a few seconds, the hazard warning lights will
start flashing.
4.When the designated tire pressure is reached, the horn will beep once and the hazard
warning flashers will stop flashing.
5. Repeat this procedure for any additional under-inflated tires.
After tire pressures are adjusted, drive the vehicle at speeds above 16 mph (25 km/h). The
Tire Pressure Low - Add Air warning message and low tire pressure warning light
will extinguish.
7
essent i al i n f o r m a t i o n
When the low tire pressure warning light flashes for approximately 1 minute and then remains
on, the TPMS is not functioning properly. Have the system checked by an INFINITI retailer.
Tire pressure rises and falls depending on the heat caused by the vehicle’s operation and the
outside temperature. Low outside temperature can lower the temperature of the air inside
the tire, which can cause a lower tire inflation pressure. This may cause the low tire pressure
warning light to illuminate. If the warning light illuminates, check the tire pressure in your tires.
• Check the tire pressure (including the spare tire) often and always prior to long distance trips.
The Tire and Loading Information label contains valuable information. Please refer to
“Technical and consumer information (section 9)” in your Owner’s Manual for the location
of the Tire and Loading Information label.
For more information, refer to the “Instruments and controls (section 2)”, the “Starting and driving (section 5)” and the
“Maintenance and do-it-yourself (section 8)” of your Owner’s Manual.
Loose Fuel Cap
A LOOSE FUEL CAP warning message will appear
in the vehicle information display 1 when the
fuel-filler cap is not tightened correctly.
To tighten, turn the cap clockwise until a single
click is heard.
1
2
The warning message will extinguish when the vehicle
detects the fuel-filler cap is properly tightened and the
reset button 2 is pressed for about 1 second.
If the cap is not properly tightened, the Malfunction Indicator Light
may illuminate.
For more information, refer to the “Instruments and controls (section 2)” and the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
Fuel-filler Door
The fuel-filler door is located on the driver’s side of the vehicle.
The fuel-filler door automatically locks or unlocks
when the driver’s door is locked or unlocked.
To open the fuel-filler door, push the right side of
the fuel-filler door and release.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Towing Your Vehicle
All-Wheel Drive (AWD) Vehicle:
• An all-wheel drive vehicle must be towed with all wheels off the ground, even if the
vehicle is placed in the 2WD mode.
For proper towing and to avoid accidental damage to your vehicle, NISSAN recommends
that a service operator tow your vehicle after carefully reading the Owner’s manual
precautions.
For more information, refer to the “In case of emergency (section 6)” of your Owner’s Manual.
8
Accessing the Front Cup Holders
To open the cup holders, push the lid 1 down
and release.
1
For more information, refer to the “Instruments and controls (section 2)” of
your Owner’s Manual.
Front Armrest/Center Console Storage Box
To access the top storage bin, pull up on the driver’s
side lever 1 .
To access the bottom storage bin, pull up on the
passenger’s side lever 2 .
2
1
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
Clock Set/Adjustment
DIGITAL CLOCK ADJUSTMENT
To adjust the time and the appearance of the clock
on the display:
1.Press the SETTING button on the control panel.
2.Touch the Others key.
3.Touch the Clock key.
The following settings can be adjusted:
• On-screen Clock: The clock in the upper right corner of the display can be turned ON
or OFF.
• Clock Format (24h): The clock can be set to 12 hours or 24 hours.
• Offset (hour): The time can be adjusted by increasing or decreasing per hour.
• Offset (min): The time can be adjusted by increasing or decreasing per minute.
• Daylight Savings Time: The application of daylight savings time can be turned ON or OFF.
• Time Zone: Adjust the time zone. Choose a time zone from the available list.
Press the
BACK button to return to the previous screen.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your
Owner’s Manual.
9
f i rst dr i v e f e a t u r e s
INFINITI Intelligent Key System
The INFINITI Intelligent Key system allows you to lock or unlock your
vehicle, open your liftgate and remotely start the engine. It is important to
make sure the Intelligent Key is with you (that is, in your pocket or purse).
REMOTE ENGINE START* (if so equipped)
2
The remote engine start system must be enabled in the vehicle
settings within the vehicle information display.
The remote engine start operating range is approximately 200 ft
(60 m) from the vehicle. The effective operating range may be
shorter due to environmental conditions or obstacles between you
and the vehicle.
1
4
5
6
For the remote engine start to function, the vehicle must be in the
P (PARK) position with the ignition off and all the doors closed
and locked.
To start your vehicle remotely:
1. Press the
button 1 .
2.Within 5 seconds, press and hold the remote engine start
2 seconds.
button 2 for at least
The engine will start, and the parking lights will turn on.
Automatic climate control will begin heating or cooling the vehicle depending on the last
used mode.
The engine will run for 10 minutes and then turn off.
Repeat steps 1 and 2 to extend the time for an additional 10 minute period.
• After two remote starts, the ignition switch must be cycled before the remote start can be
used again.
To start driving, depress the brake pedal and push the ignition switch START/STOP button.
LOCKING AND UNLOCKING THE VEHICLE
The lock and unlock operating range of the
Intelligent Key is within 31.5 in (80 cm) from
each request switch.
To lock the vehicle, push either door handle request
switch 3 once or press the button 1 on the
key fob.
3
To unlock the vehicle, perform one of the following procedures:
• Push either door handle request switch 3 once; the corresponding door will unlock. Push
the door handle request switch again within 30 seconds; all other doors will unlock, or
• Press the button 4 on the key fob to unlock the driver’s side door. Press the
again; all other doors will unlock.
*Laws in some communities may restrict the use of remote starters. Check local regulations before using this feature.
10
button
LIFTGATE RELEASE
To open the rear liftgate, press the
button 5 for longer than 1 second.
To close the rear liftgate, press the
button 5 again for longer than 1 second.
PANIC ALARM
The Intelligent Key can also be used to activate the panic alarm by pressing and holding
the button 6 for more than 1 second. Once activated, the panic alarm and headlights
will stay on for a period of time.
INTELLIGENT KEY BATTERY DISCHARGE
If the battery of the Intelligent Key is discharged or
environmental conditions interfere with the
Intelligent Key operation, start the engine according
to the following procedure:
1. Move the shift lever to the P (PARK) position.
2. Firmly apply the foot brake.
3. Touch the ignition switch with the Intelligent Key
and a chime will sound.
4. Within 10 seconds after the chime sounds, push the ignition switch while depressing
the brake pedal and the engine will start.
For more information, refer to the “Pre-driving checks and adjustments (section 3)”, the “Starting and driving (section 5)” and
the “Maintenance and do-it-yourself (section 8)” of your Owner’s Manual.
Power Liftgate
When the liftgate is closed and locked, the liftgate
will open automatically by:
• Pushing the power liftgate switch 1 on the
instrument panel.
•P
ushing the liftgate opener switch 2 , the
liftgate must be unlocked, or you must have the
Intelligent Key with you (that is, in your pocket
or purse).
•P
ressing the
button 3 on the
INFINITI Intelligent Key for more
than 1 second.
1
4
2
The power liftgate operation can be
turned on or off by the power liftgate main switch
4 on the instrument panel.
• When the power liftgate main switch is pushed to
the OFF position, power operation is not available
using the power liftgate switch on the liftgate 5
or the liftgate opener switch 2 .
3
5
For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
11
f i rst dr i v e f e a t u r e s
Power Seat Adjustments
To slide the seat forward or backward, push the
control switch
1 forward or backward.
To recline the seatback, push the switch
forward or backward.
1
2
3
2
SEAT LIFTER
To raise or lower the front portion or height of the
seat, push the front or back end of the switch
1 up or down.
POWER LUMBAR SUPPORT (if so equipped for driver’s seat)
To adjust the seat lumbar support, push the front or back end of the switch
3 .
For more information, refer to the “Safety —— Seats, seat belts and supplemental restraint system (section 1)” of your
Owner’s Manual.
2ND Row Seats
To slide the seat forward or backward, pull the
center of the bar 1 up and hold it while you slide
the seat forward or backward to the desired
position. Release the bar to lock the seat
in position.
3
To recline the seatback, pull up on the recline handle
2 and lean back. To bring the seatback forward, pull
the lever up and lean your body forward. Release the
lever to lock the seatback in position.
2
MULTI-MODE/CHILD SEAT ACCESS FUNCTION
This feature is not available on the driver’s side of the 2nd row seat.
If a child safety seat is installed on the passenger’s side of the 2nd row seat, the 3rd row
can be accessed without removing the child safety seat.
To access the 3rd row from outside the vehicle, lift up on the seatback release lever 3 .
EZ ENTRY MODE
To enter the 3rd row from outside the vehicle, lift up fully on the seatback lever 3 .
This will release the back of the seat and fold up the seat cushion.
For access to the rear seat, slide the entire seat forward by pushing on the upper
seatback area.
To return the seat to a locked position, push the upper seatback rearward until the
seatback and track are locked. Push the seat cushion down. Locking the seatback will
also lock the track.
For more information, refer to the “Safety —— Seats, seat belts and supplemental restraint system (section 1)”
of your Owner’s Manual.
12
1
3RD Row Manual Reclining Seatback
To recline the seatback, pull up on the latch 1
located on the outside corner of each seatback.
Lean back until the desired angle is obtained.
To bring the seatback forward again, pull up on the
latch 1 and move your body forward. The
seatback will move forward.
1
For more information, refer to the “Safety —— Seats, seat belts and
supplemental restraint system (section 1)” of your Owner’s Manual.
Automatic Drive Positioner (if so equipped)
T wo positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner 1 memory.
1
Follow this procedure to set the memory positions:
• Confirm the shift lever is in the P (PARK) position.
• Push the ignition switch to the ON position.
• Adjust the driver’s seat, steering column and
outside mirrors to the desired positions using the adjusting switches for each feature.
• Push the SET switch and within 5 seconds push the memory switch (1 or 2) for at least 1 second.
• The indicator light on the memory switch you select will illuminate for approximately 5
seconds, and a chime will sound (if so equipped) when the memory is stored correctly.
• T he driver’s seat, steering column and outside mirror positions are now set to
your preferences.
These memorized positions can also be linked to your INFINITI Intelligent Key. To link a
memorized position to your INFINITI Intelligent Key, press the UNLOCK button on the key fob
after completing the previous step.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Outside Mirror Control Switch
To select the right or left side mirror, move the
control switch 1 right or left.
Adjust each mirror to the desired position using the
switch 2 .
To fold the outside rearview mirrors, push the
switch 3 to the
position. To unfold the
outside rearview mirrors, push the switch 3 to
position.
the
1
2
3
13
f i rst dr i v e f e a t u r e s
REVERSE TILT-DOWN FEATURE (if so equipped)
The reverse tilt-down feature will turn both outside mirror surfaces downward to provide
better rear visibility close to the vehicle.
1. Push the ignition switch to the ON position.
2. Choose the right or left outside mirror by operating the outside mirror control switch 1 .
3. Move the shift lever to the R (REVERSE) position.
4. The outside mirror surfaces move downward.
The outside mirror surfaces will return to their original position when one of the following
conditions has occurred:
• The shift lever is moved to any position other than R (REVERSE).
• The outside mirror control switch is set to the center (neutral) position.
• The ignition switch is pushed to the OFF position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Assist Charge Gauge
This shows the power consumed 2 or generated
1 by the electric motor.
For more information, refer to the “HEV Overview (section HEV)” and the
“Instruments and controls (section 2)” of your Owner’s Manual.
1
Starting/Stopping the Hybrid System
It is important to make sure the INFINITI Intelligent
Key is with you (that is, in your pocket or purse).
Depress the brake pedal.
Press the ignition switch START/STOP button to
start the hybrid system.
TURNING THE HYBRID SYSTEM OFF
Move the shift lever to the P (PARK) position and
apply the parking brake.
Press the ignition switch START/STOP button to turn the hybrid system off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
14
2
Headlight Control Switch
HEADLIGHT CONTROL
Turn the headlight control switch to the
position
1 to turn on the front parking, tail, license plate and
instrument panel lights. Turn the switch to the
position 2 to turn on the headlights.
3
1
2
AUTOLIGHT SYSTEM
The autolight system will automatically turn the headlights on when it is dark and off when
it is light. The system will keep the headlights on for a period of time after you turn the
ignition off and all doors are closed.
To activate the autolight system, turn the headlight control switch to the AUTO position 3
then push the ignition switch to ON. To deactivate the autolight system, turn the headlight
control switch to the OFF,
position 1 or
position 2 .
HIGH BEAM SELECT
Push the headlight control switch forward 4 to
select the high beam function. The blue indicator
illuminates in the instrument panel.
light
Pull the headlight switch back to the original
position to select the low beam. The blue
indicator light extinguish.
4
5
Pull and release the headlight control switch 5 to
flash the headlight high beams on and off.
FOG LIGHT SWITCH
The headlights must be switched to AUTO, or the low
beams
selected for the fog lights to operate.
Turn the switch (inside collar) to the
to turn the fog lights on.
6
position 6
Turn the switch (inside collar) to the OFF position to
turn the fog lights off.
LANE CHANGE SIGNAL
Move the lever up or down until the turn signal begins to flash, but the lever does
not latch, to signal a lane change. Hold the lever until the lane change is completed.
Move the lever up or down until the turn signal begins to flash, but the lever does
not latch, and release the lever. The turn signal will automatically flash 3 times.
Choose the appropriate method to signal a lane change based on the road and
traffic conditions.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
15
f i rst dr i v e f e a t u r e s
Windshield Wiper and Washer Switch
Move the lever to one of the following positions
to operate the windshield wipers:
1 Mist (MIST) – One sweep operation of the
2 Auto (AUTO) – Operates the speed-sensing
3
OFF
AUTO 2
front wipers.
and rain-sensing (if so equipped) front
wipers intermittently. To increase or decrease
wiper sensitivity, twist the control ring 3 .
4 Low (LO) – Front wipers operate at a
5 High (HI) – Front wipers operate at a
1
MIST
LO
4
HI
5
continuous low-speed.
continuous high-speed.
6 Pull the lever toward you to activate the
front washer. The front wipers will operate
several times.
6
9
REAR WINDSHIELD WIPER AND WASHER
7 Intermittent (INT) – Rear wiper
8 Low (ON) – Rear wiper operates at a
9 Push the lever forward to activate the
operates intermittently.
continuous low-speed.
rear washer. The rear wiper will operate
several times.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
16
7
INT
8
ON
8
3
9
12
7
1
4
10
2
11
6
5
Automatic Climate Controls
1 AUTO BUTTON
The auto mode may be used year-round. Press the AUTO button to turn the system on,
and the system will automatically control the inside temperature (automatic cooling
and/or dehumidified heating), air flow distribution and fan speed.
2 CLIMATE BUTTON
Press the CLIMATE button to adjust your automatic climate controls using the climate
settings on the control panel display screen.
3 DRIVER’S SIDE TEMPERATURE CONTROL BUTTONS
Press the driver’s side temperature control buttons up
cooler air.
for warmer air or down
for
4 DRIVER’S SIDE MANUAL AIR FLOW CONTROL BUTTON
Press the driver’s side manual air flow control button to manually control the driver’s
side air flow modes.
The following air flow modes will display on the control panel display screen:
Air flows from the center and side vents.
Air flows from the center, side and foot vents.
Air flows mainly from the foot vents.
Air flows from the defroster and foot vents.
5 PASSENGER’S SIDE TEMPERATURE CONTROL BUTTONS
To manually adjust the passenger’s side temperature, press the passenger’s side
temperature control buttons up for warmer air or down for cooler air.
6 DUAL BUTTON
Press the DUAL button to turn the passenger’s side temperature controls on or off. This
will allow the passenger’s side temperature to be adjusted independently from the
driver’s side by pressing the passenger’s side temperature control buttons.
17
f i rst dr i v e f e a t u r e s
7 FAN SPEED CONTROL BUTTONS
Press the left button to decrease the fan speed or press the right
increase the fan speed.
button to
8 DEFROSTING/DEFOGGING FRONT AND SIDE WINDOWS
Press the defroster button
to turn the system on. The A/C automatically turns on when
the defroster mode is selected. This feature removes humidity from the air.
To defrost the front and side windows, set the temperature controls 3 and fan
speed controls 7 to their maximum settings.
9 DEFROSTING REAR WINDOW AND OUTSIDE MIRRORS
Push the rear window defroster button
This function automatically turns off after approximately 15 minutes.
REAR to turn the system on or off.
10 REAR AIR CONDITIONER
To control the rear automatic air conditioning
system with the front air conditioner
control panel:
• Turn on the front climate control system by
pressing the AUTO button 1 .
•P
ress the REAR button.
When the rear automatic air conditioning system is on, the indicator light on the REAR
button will illuminate and the front display will switch to the Rear Air-conditioning
screen. Use the driver’s temperature and fan speed buttons to adjust the settings.
To adjust the front air conditioning system, press the REAR button again.
To turn off the rear automatic air conditioning system from the front controls, press the
REAR button until the Rear Air-conditioning screen is displayed. Then press the
OFF button 12 .
The rear passengers controls are unavailable when Rear Air-conditioning screen is
shown on the front display.
11 AIR RECIRCULATION BUTTON
Press the intake air control
button to recirculate interior air inside the vehicle. The
indicator light on the button will illuminate. This system is used to avoid certain
outside odors and to help adjust the inside vehicle temperature more effectively.
The air recirculation mode cannot be activated when the climate control system is in the
front defroster mode
.
Press the intake air control
button again to change the air circulation from the
intake air to the outside air. The
indicator light on the button will turn off.
12 OFF BUTTON
Press the OFF button to turn the climate control system off.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your
Owner’s Manual.
18
Rear Climate Controls
To activate the system:
1.Turn on the front climate control system by
pressing the AUTO button 1 .
1
2
2.Press the REAR button 2 on the front control panel
until the “Rear Air-conditioning” screen is displayed.
• The indicator light will illuminate.
• T he OFF 3 , Fan Speed 4 , Temperature 5
and AUTO 6 buttons will now control the rear
5
3
4
climate control system.
6
3.Press the REAR button 2 again, and the screen
will return to what was previously displayed.
• The indicator light will stay illuminated to indicate that the rear climate control system is active.
OFF button 3 – Turns off the rear climate control system and REAR button indicator light.
Fan speed control buttons 4 – Press
or to increase or decrease fan speed.
Temperature increase and decrease buttons 5 – Adjusts the rear temperature
up or down .
AUTO button 6 – System automatically works to keep air flow and fan speed at a
constant temperature.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your
Owner’s Manual.
2
1
3
5
6
4
FM/AM/SiriusXM®* Satellite Radio with CD/DVD Player (if so equipped)
1 ON•OFF BUTTON/VOL (volume) CONTROL KNOB
Press the ON•OFF button to turn the system on or off.
Turn the VOL (volume) control knob right or left to increase or decrease the volume.
2 AUDIO BUTTON/TUNE/FOLDER CONTROL KNOB
3 Press the AUDIO button to access the audio settings screen.
To manually tune the radio, turn the TUNE/FOLDER control knob left or right.
SEEK•CAT/TRACK BUTTONS
To scan quickly and stop at the previous or next broadcast station, press the
or
end of the SEEK•CAT/TRACK button.
For satellite radio, press the
or
end of the SEEK•CAT/TRACK button to switch
to the first channel of the previous or next category.
To change tracks on a CD, press the
or
end of the SEEK•CAT/TRACK button.
To rewind or fast forward a track on a CD, press and hold the
or
end of the
SEEK•CAT/TRACK button.
*SiriusXM® Satellite Radio is only available on vehicles equipped with an optional satellite radio subscription service.
19
f i rst dr i v e f e a t u r e s
4 STATION PRESET BUTTONS
Twelve stations can be set for the FM band, 6 for the AM band and 18 for satellite radio.
To store a station in a preset, you must first select a radio band by pressing the FM•AM
5 or XM 6 button, then tune to the desired FM, AM or satellite radio station.
Then press and hold the desired station preset button (1-6) until the preset number is
updated on the display and the sound is briefly muted. The channel indicator will then
display, and the sound will resume. Programing is now complete.
To retrieve a previously set station, select the radio band where the preset was stored
then press the corresponding station select button (1-6).
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your Owner’s Manual.
USB (Universal Serial Bus) Connection
Port/iPod® Interface
The USB port 1 is located in the center
console under the arm rest.
1
When a compatible USB memory device or
iPod® is plugged into the USB port, compatible audio
and video files stored on the device can be played
through the vehicle’s audio system and front display.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your
Owner’s Manual.
Conventional (Fixed Speed) Cruise Control
The cruise control system enables you to set a
constant cruising speed once the vehicle has
reached 25 mph (40 km/h).
The system will automatically maintain the set
speed until you tap the brake pedal, accelerate,
cancel or turn the system off.
4
3
1
2
To activate the cruise control, push the CRUISE
ON/OFF switch 1 . The CRUISE indicator light in the instrument panel will illuminate.
To set a cruising speed, accelerate the vehicle to the desired speed, push the COAST/SET
switch 2 and release. The SET indicator light in the instrument panel will illuminate. Take
your foot off the accelerator pedal. Your vehicle will maintain the set speed.
To reset at a faster cruising speed, push and hold the ACCEL/RES switch 3 . When the
vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COAST/SET switch 2 . Release the
switch when the vehicle slows to the desired speed.
To cancel the preset speed, push the CANCEL switch 4 .
To turn off cruise control, push the CRUISE ON/OFF switch 1 . Both the CRUISE indicator
light and the SET indicator light in the instrument panel will extinguish.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
20
Intelligent Cruise Control (ICC) System (if so equipped)
VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE
To set Vehicle-To-Vehicle Distance Control mode,
press the CRUISE ON/OFF button 1 for less than
1.5 seconds. The CRUISE indicator light 2
will illuminate.
8
7
4
3
Accelerate to the desired speed.
Push down on the COAST/SET switch 3 and
release it. Cruise control will be set to the
desired speed.
1
Press the distance button 4 repeatedly to change
the set distance between long, middle and short.
When a vehicle is not detected ahead of you in the
lane, the set distance and set vehicle speed
indicator lights will illuminate 5 in set mode.
2
When a vehicle is detected ahead of you in the lane,
the vehicle ahead detection, set distance and set vehicle speed
indicator lights will illuminate 6 in set mode.
To reset at a faster cruising speed, push and hold the ACCEL/RES
switch 7 . When the vehicle attains the desired speed, release the switch.
5
6
To reset at a slower cruising speed, push and hold the COAST/SET switch
3 . Release the switch when the vehicle slows to the desired speed.
To cancel the preset speed, push the CANCEL switch 8 or tap the brake pedal. The set
vehicle speed indicator 5 will extinguish.
To turn off cruise control, press the CRUISE ON/OFF button 1 . The CRUISE indicator light
2 in the instrument panel will extinguish.
To set conventional (fixed speed) cruise control mode:
While cruise control is off, press the CRUISE ON/OFF button 1 and hold it down for more than 1.5 seconds. The CRUISE indicator light will illuminate.
Accelerate to the desired speed.
Push down on the COAST/SET switch and release it. The SET indicator light will illuminate.
Cruise control will be set to the desired speed.
To switch between the two cruise control modes:
When one of the two cruise modes is in use, you must turn the system off, and then turn it
on again to select the other cruise control mode.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
21
f i rst dr i v e f e a t u r e s
Power Outlets
12V OUTLETS
The power outlets are for powering electrical
accessories such as cellular telephones. They are
rated at 12 volt, 120W (10A) maximum.
1
To use a power outlet, open the cap.
The power outlets on the instrument panel 1 ,
inside the center console 2 , on the back of the
center console 3 and in the cargo area 4
are powered only when the ignition switch
is in the ACC or ON position.
2
3
4
120V OUTLET (if so equipped)
The 120V outlet 5 is located on the back of the
center console.
5
To use the outlets for devices that require 120V
power, place the ignition in the ON position and
push the power inverter switch 6 .
The switch will illuminate when enabled.
For more information, refer to the “Instruments and controls (section 2)”
of your Owner’s Manual.
22
6
s y s t em guide
Vehicle Information Display
The vehicle information display 1 displays items such as:
Vehicle settings
1
Trip computer information
Energy flow meter
Drive system warnings and settings (if so equipped)
Cruise control system
I ntelligent Cruise Control (ICC) system
(if so equipped) information
2
4
3
Intelligent Key operation information
5
Indicators and warnings
Tire pressure information
USING THE VEHICLE INFORMATION DISPLAY
The vehicle information display modes can be changed
using the
button 2 and ENTER button 3 located
on the steering wheel.
1. Press
button 2 to enter the vehicle information menu items.
2. Press button 4 to navigate through the items in the vehicle information.
3. Press ENTER 3 to change or select an item in the vehicle information display.
4. Press
button 5 to go back to the previous menu.
START UP DISPLAY
When the vehicle is placed in the ON or ACC position, the screens that display in the vehicle
information include:
Active system
status (if so
equipped)
Trip computer
Tire pressure
information
Fuel economy
RESETTING THE TRIP COMPUTER
1.Press the
button 2 until you reach the trip
computer mode 6 .
Warnings
(displays when a
warning is present)
6
2. Press the
button 2 again for more than 1.5
seconds to reset average fuel consumption, average
speed, distance to empty and journey time.
SETTINGS
The setting mode allows you to change the information displayed in the vehicle
information display:
Driver Assistance
(if so equipped)
Vehicle Settings
Main Menu Selection
Body Color
Maintenance
Alarms
Language
Unit
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
Welcome Effects
Factory Reset
23
syste m g ui d e
Bluetooth® Hands-free Phone System
A cellular telephone should not be used while
driving so full attention may be given to
vehicle operation.*
SYSTEM OPERATING TIPS
Bluetooth®
Controls
Press the
or button to interrupt the voice
prompts at any time and speak a command after
the tone.
For vehicles not equipped with Navigation:
• T o use the system faster, you may speak the second
level commands with the main menu command on
the main menu. For example, press the
or
button and after the tone, say “Call Redial”.
F or vehicles equipped with Navigation:
• R
efer to “Voice recognition (section 9)” of your
Navigation System Owner’s Manual
for more information.
T he “Help” command can be used to hear a list of
available commands at any time.
Microphone
R
educe background noise as much as possible by closing windows and pointing HVAC
vents away from the ceiling.
Speak naturally without long pauses and without raising your voice.
W
hen speaking phonebook names, please be aware some phones require the last name
to be spoken before the first name. For example, “Michael Smith” may be spoken as
“Smith Michael”.
To cancel a Voice Recognition session, say “Cancel” or “Quit” or press and hold the
button for 5 seconds.
or
To go back to the previous command, say “Go back” or “Correction”.
I f the Voice Recognition system does not recognize your voice commands, train the system
using the Speaker Adaptation Mode. See your Owner’s Manual for detailed information.
F or more detailed information and instructions, refer to your cellular phone’s Owner’s
Manual and visit www.InfinitiUSA.com/bluetooth.
*Some jurisdictions prohibit the use of cellular telephones while driving.
24
Bluetooth® System without Navigation (if so equipped)
CONNECTING PROCEDURE
1. Press the
button on the steering wheel. The
system announces the available commands.
2. Say “Connect Phone”. The system
acknowledges the command and announces
the next set of available commands.
3. Say “Add Phone”. The system acknowledges
the command and asks you to initiate
connecting from the phone handset.
4. Initiate connecting from the phone.
• The
connecting procedure varies according to each cellular phone model.
For detailed connecting instructions and a list of compatible phones, please
visit www.InfinitiUSA.com/bluetooth.
• When
prompted for a PIN, enter “1234” from the handset. (The PIN is assigned by
INFINITI and cannot be changed.)
5.Say the name of the phone when the system asks you to provide one. You can give the
phone a name of your choice.
PHONEBOOK
D
epending on the cellular phone, the system may automatically download the entire
phonebook. For more information, please visit www.InfinitiUSA.com/bluetooth or refer to
the cellular phone’s Owner’s Manual.
If the phonebook does not download automatically, 40 entries can be
individually downloaded.
To manually download entries:
1. Push the
button on the steering wheel.
2. After the tone, say “Phonebook”.
3. After the next tone, say “Transfer Entry”.
4. Using the cellular phone, select an entry to send to the vehicle. Please consult the
website above or your phone’s Owner’s Manual for specific steps of the phone.
5. The system will speak the transferred entry. Confirm the entry by saying “Yes” after the tone.
MAKING A CALL BY PHONEBOOK ENTRY
I n some cases, names stored using all UPPERCASE letters may not be recognized by the
Voice Recognition system.
1. Press the
button.
2. After waiting for the tone, say “Call”.
3. After the next tone, speak a name of a phonebook entry. For example, “Michael Smith”.
4. Confirm the correct name is recognized by saying “Dial” after the tone.
25
syste m g ui d e
MAKING A CALL BY PHONE NUMBER
1. Press the
button.
2. After waiting for the tone, say “Call”.
3. After the next tone, say “Phone Number”.
4. After the next tone, say “123-456-7890”.
Y
ou may also say the digits in groups of 3, 3 and 4, respectively. To use this group
dialing method, say only the first 3 digits of the phone number instead of all 10 digits.
After the system recognizes the digits, it will request the next 3 digits and finally the last
4 digits.
5. After the system speaks the correct number and sounds the tone, say “Dial”.
RECEIVING/ENDING A CALL
T o accept the call, press the
T o reject the call, press the
T o hang-up, press the
button on the steering wheel.
button.
button.
Bluetooth System with Navigation (if so equipped)
®
CONNECTING PROCEDURE
The vehicle must be stationary when connecting
the phone.
1.Press the SETTING button on the instrument panel
and select the “Bluetooth” key on the display.
2.Select the “Connect Bluetooth” key.
26
3.A pop-up box will appear on the screen, prompting
you to confirm that the connection is for the phone
system. Select the “Yes” key.
4. Initiate connecting from the phone.
T he connecting procedure varies according
to each cellular phone model. For detailed
connecting instructions and a list of
compatible phones, please visit
www.InfinitiUSA.com/bluetooth.
W
hen prompted for a PIN, enter “1234” from the
handset. (The PIN is assigned by INFINITI and
cannot be changed.)
5. When connecting is complete, the screen will return to the Bluetooth® settings screen.
PHONEBOOK SETUP
D
epending on your cellular phone, the system may automatically download your cellular
phone’s entire phonebook to the vehicle’s Bluetooth® system.
I f the phonebook does not download automatically, the vehicle’s phonebook may be set
for up to 1,000 entries.
To manually download entries:
1.Press the button and select the
“Quick Dial” key.
2.Select the “Add New” key at the top of the
display. There are different methods to
input a phone number. Select one of the
following options:
• “ Copy from Call History” to save a number from
the Outgoing, Incoming or Missed Calls lists.
• “ Copy from the Handset” to save a number that
has been downloaded from your handset to
the vehicle.
• “ Enter Number by Keypad” to input the number
and name manually.
27
syste m g ui d e
MAKING A CALL
To make a call, follow this procedure:
1.Press the button on the steering wheel. The
“Phone” menu will appear on the control
panel display.
2.Select the “Quick Dial”, “Call History”, “Phonebook”
or “Dial Number” key.
3.Select the desired entry from the list.
4.Dialing begins when the entry is selected or when the “OK” key is selected.
RECEIVING/ENDING A CALL
T o accept the call, press the button on the
steering wheel or touch the “Answer” key.
To reject the call, touch the “Reject Call” key.
To hang-up, press the
“Hang up” key.
button or touch the
For more information, refer to the “Monitor, climate, audio, phone and
voice recognition systems (section 4)” of your Owner’s Manual or please
visit www.InfinitiUSA.com/bluetooth.
28
1
2
3
4
5
6
8
7
10
9
11
Navigation System (if so equipped)
1 Touch-screen display.
2 Destination (DEST) – Press to enter a destination.
Information (INFO) – Press to display the vehicle, traffic (if so equipped), weather (if so
3 equipped) or Voice Recognition information.
4 SETTING – Press to access the system settings.
5 INFINITI Controller
• ENTER button – Press the ENTER button to select the highlighted item on the screen.
• Center dial – Turn the dial to highlight an item on the screen, adjust a setting or adjust
the map scale.
• Slide the controller (push upward/downward/leftward/rightward) to select an item on
the screen, adjust a setting or scroll the map in eight directions.
ROUTE – Press to access guidance control functions such as guidance cancellation, route
6 priority or waypoint setting on the route.
MAP – Press to display the map. While following a programed route, press multiple times
7 to change the type of route information.
STATUS – Press multiple times to display audio information, air conditioner status, fuel
8 economy or navigation directions.
29
syste m g ui d e
– Press to switch between the day screen (bright) and the night screen (dark). Press
and hold the button to turn the display off. Press again to turn the display on.
9 10 BACK – Press to return to the previous screen. In a settings screen, this button can also
be used to apply the setting. In a character input screen, this button can also delete the
characters that have been entered.
11 VOICE – Press to hear the current voice guidance for a programed route.
For more information, please refer to your Navigation System Owner’s Manual.
Theater Package (if so equipped)
With this Entertainment System, you can play video
files via a DVD, USB or CD, providing images and
sound both from the front and rear display screens.
You can also connect auxiliary devices, such as
video games, camcorders or portable video players,
to the auxiliary jacks 1 located on the back of
the center console. (Your device will be controlled
through its own control panel.)
Rear Auxiliary Mode allows rear seat passengers to
independently display different sources on
each screen.
4
Use the remote controller 2 , provided with the
system, to operate the rear display screens.
Use the headphones 3 , also provided with
the system, to listen to audio wirelessly and
independently. You may also connect your own
wired-headphones to the headphone jacks 4
located on the back of the center console.
For optimum performance, select the appropriate
headphone channel 5 that corresponds to the
headrest display being viewed directly in front of you.
1
2
To watch or control videos on the front display,
make sure the vehicle is in the P (PARK) position
and the parking brake is applied.
3
To reduce driver distraction, the wireless headphones will not
operate while located in the front seats and movies will not be
shown on the front display while the vehicle is in any drive position.
To access standard DVD controls on the front display while playing
a DVD on the rear display, press the DISC•AUX button on the audio
control panel while the vehicle is in the P (PARK) position and the
parking brake is applied.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your
Owner’s Manual.
30
5
HOMELINK
HomeLink® Universal Transceiver
The HomeLink® Universal Transceiver system can learn and consolidate the functions of
up to 3 different hand-held transmitters, operating items such as garage doors, property
gates, outdoor and indoor lights or alarm systems.
To program the HomeLink® Universal Transceiver:
•P
osition the handheld transceiver 1-3 in (26-76 mm) away from the HomeLink surface,
keeping the HomeLink indicator light in view.
•P
ress and hold the desired HomeLink button and the handheld transmitter button
simultaneously until the HomeLink indicator light flashes slowly and then rapidly.
•B
oth buttons may be released when the indicator light flashes rapidly.
To verify the programing is complete, press and hold the HomeLink button and observe the
indicator light:
• A solid, continuous light indicates the programing is complete and the HomeLink button
will activate your device.
• A blinking light that turns to a solid, continuous light after 2 seconds indicates additional
steps are required to complete the programing.
An additional person may make the remaining steps easier. To complete the
programing process:
• At the receiver of the device that you are programing to the HomeLink button, press
and release the “learn” or “smart” button (the name may vary by manufacturer but it is
usually located near where the hanging antenna wire is attached to the unit). You have
approximately 30 seconds to initiate the following step.
• Press and hold the programed HomeLink button for 2 seconds and release.
You may have to repeat the previous 2 steps up to 3 times to complete the programing
process. HomeLink should now activate your device.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual, the HomeLink website at
www.homelink.com or call 1-800-355-3515.
31
memo
me mo
Printing: August 2014 (03) / QR15EA HL50U0 / Printed in USA
To view detailed instructional videos, go to
www.infinitiownersinfo.mobi/2015/qx60
or snap this barcode with an appropriate
barcode reader.
This Quick Reference Guide is intended to provide an overview of some of the unique features of
your new vehicle. Please see your Owner’s Manual for important safety information and system
operation limitations. Features and equipment in your vehicle may vary depending on model,
trim level, options selected, order, date of production, region or availability. Therefore, you may
find information about features or equipment that are not included or installed on your vehicle.
All information, specifications and illustrations in this Quick Reference Guide are those in effect
at the time of printing. NISSAN reserves the right to change specifications, performance, design
or component suppliers without notice and without obligation. From time to time, NISSAN
may update or revise this Quick Reference Guide to provide owners with the most accurate
information currently available. Please carefully read and retain, with this Quick Reference Guide,
all revision updates sent to you by NISSAN to ensure you have access to accurate and up-to-date
information regarding your vehicle. Current versions of vehicle Quick Reference Guides, Owner’s
Manuals and any updates can also be found in the Owner section of the INFINITI website at
https://owners.infinitiusa.com/iowners/navigation/manualsAndGuides. If you have questions
concerning any information in your Owner’s Manual, contact INFINITI Consumer Affairs. See
the INFINITI CUSTOMER CARE PROGRAM page in the Owner’s Manual for contact information.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement