Datasheet [PDF:190.1KB]
UFM Series
VITS Inserter
UFM-100VITS
The UFM-100VITS is a module-type VITS inserter that can be
installed in the UFM frame. It inserts internally or externally
generated test signals or data patterns on 10 to 23 lines in
the vertical blanking period of the input program signal.
Features
n Consists of an insertion module and signal generation module.
n Internally and externally-generated test signals can be set as program output
VITS signals.
n Delete and pass functions available for the same lines as the insert function.
n 3 inputs available for external VITS signals.
n Input program signals can be used as through output without conversion.
Block Diagram
PGM IN
PGM OUT
MON OUT
EXT1 IN
Insert
Process
EXT2 IN
EXT3 IN
Insert Card
Timing Select
BB OUT 1
Genlock
Generator
BB
Generator
D/A
BB OUT 2
BB OUT 3
Signal Select
Signal
Generator
D/A
Generator Card
UFM-100VITS
VITS
Inserter
Test Signal
Generator
3 external
VITS
signals in
BB
3 out
UFM-100VITS Specifications
l Standard
l Internal Generate Signal
l Program Input
l External Input
l Program Output
l Program monitor Output
l BB Output
l Frequency
l Chrominance-to-luminance Gain
l Chrominance-to-luminance Delay
l DG / DP
l HV Tilt
l DC Output Level
l S/N Ratio
l I/O Delay
l Temperature / Humidity
l Power / Consumption / Draw
l Dimensions / Weight
l Require Slot
l Accessories
525/60 (NTSC)
12-bit, 8fsc (28.6MHz)
Analog composite: 1.0Vp-p, 75Ω, 1ea., BNC (w/ bypass function)
Analog composite: 1.0Vp-p, 75Ω, 3ea., BNC
1.0Vp-p, 75Ω, 1ea., BNC (w/ bypass function)
Analog composite: 1.0Vp-p, 75Ω, 1ea., BNC
Analog composite: 0.429Vp-p, 75Ω, 3ea., BNC
±2% (for up to 5.5MHz), ±5% (for up to 10MHz)
Less than 1%
Less than 5nsec
Less than 0.3% / Less than 0.3º
Less than 1%
0V ±10mV
Better than 60dB
11.3º (±1º) , Approx. 8.8nsec
10ºC - 40ºC / 30% - 90% (no condensation)
+12VDC - +24VDC ±10% / 7.1W / +12VDC: 0.53A, +24VDC: 294mA
106 (W) x 303 (D) mm (Front board), 108.5 (W) x 66.1 (D) mm (Rear board) / Approx. 1.0kg (2 module total)
2 slot
Operation manual
UFM-100VITS Rear View
INSERTER
1
PGM IN
PGM OUT
MONITOR OUT
EXTERNAL IN
1
GENERATOR
2
3
UFM-100VITS
2
3
BB OUT
UFM-100VITS
Universal Frame Line-up
UF-106A
UF-112
Universal frame that can install up to 6 UFM modules,
provides redundancy and universality, and contributes to
reduced system space
Universal frame that can install up to 12 UFM modules,
provides redundancy and universality, and supports remote monitoring with installation of control board
FOR-A COMPANY LIMITED
Head Office : 3-8-1 Ebisu, Shibuya-ku, Tokyo 150-0013, Japan
FOR-A America Corporate Office : 11125 Knott Ave., Suite #A, Cypress, CA 90630, U.S.A.
FOR-A America East Coast Office : 1065 Avenue of the Americas Suite #1701A New York,NY 10018, U.S.A.
FOR-A America Distribution & Service Center : 2400 N.E. Waldo Road, Gainesville, FL 32609, U.S.A.
FOR-A Corporation of Canada : 425 Queen St. W. #211, Toronto, Ontario M5V 2A5, CANADA
FOR-A UK Limited : UNIT C71, Barwell Business Park, Leatherhead Road, Chessington Surrey, KT9 2NY, U.K.
FOR-A Italia S.r.l. : Viale Europa 50 20093, Cologno Monzese (MI), Milan, ITALY
FOR-A Corporation of Korea : 801 Dangsan Bld., 53-1 Dangsan-Dong, Youngdeungpo-Gu, Seoul 150-800, Korea
Homepage:http://www.for-a.com/
+81 (0)3-3446-3936
+1 714-894-3311
+1 212-861-2758
+1 352-371-1505
+1 416-977-0343
+44 (0)20-8391-7979
+39 02-254-3635/6
+82 (0)2-2637-0761
Fax : +81 (0)3-3446-1470
Fax : +1 714-894-5399
Fax : +1 212-861-2793
Fax : +1 352-378-5320
Fax : +1 416-977-0657
Fax : +44 (0)20-8391-7978
Fax : +39 02-254-0477
Fax : +82 (0)2-2637-0760
© 2006 FOR-A Company Ltd. FOR-A is a registered trademark of FOR-A Company, Ltd. Design and specifications subject to change without notice. Printed in Japan. 0603KM1A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement