Century 1060 SDU2 [0501015] [12/1998]

Century 1060 SDU2 [0501015] [12/1998]
CENTURY
L E G E N D A R Y
Æ
L E A D E R S H I P
OWNER'S MANUAL
1060 / SDU2
INSTALLATION, OPERATION, MAINTENANCE & PARTS
NOTE: MANUAL including SPECIFICATIONS, subject to change without notice
All ratings specified are based on structural factors only,
not vehicle capacities or capabilities.
CENTURYÆ
Miller Industries Towing Equipment Inc.
8503 Hilltop Drive
Ooltewah, Tennessee 37363
Phone (423) 238-4171 ï FAX (423) 238-5371
FORM NO. 0501015
12 / 98
PRICE $25.00
LIMITED WARRANTY
MILLER INDUSTRIES TOWING EQUIPMENT INC., hereinafter referred to as MILLER, warrants to
the original purchaser that each new MILLER wrecker or other MILLER products will be free from
defects in material and workmanship for a period of twelve (12) months from date placed in service,
but in no event shall such warranty period exceed twenty-four (24) months from date of manufacture
by MILLER. The purchaser must promptly notify MILLER in writing of any failure in material or
workmanship. In no event shall MILLER accept such notification later than twenty-four (24) months
from date of delivery or twelve (12) months from date placed in service, whichever is earlier.
MILLER's obligation under this warranty, statutory or otherwise, is limited to the repair or replacement
at the MILLER factory, or at a point designated by MILLER, of such part or parts as shall appear upon
inspection by MILLER to be defective in material or workmanship. New or remanufactured parts will be
used for any replacement at MILLER's option. This warranty is not transferable. This warranty does
not obligate MILLER to bear the cost of labor or transportation charges in connection with the repair or
replacement of any parts found to be defective, nor shall it apply to a product upon which repairs or
alterations have been made unless authorized by MILLER.
EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, MILLER MAKES NO OTHER
WARRANTY, EXPRESS OR IMPLIED, AND HEREBY DISCLAIMS ALL OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. MILLER shall in no event be liable for claimed downtime,
claimed loss of profits or goodwill, or any other special, incidental, indirect, or consequential damages
concerning or relating to any product or parts, whether based on negligence, strict liability, breach of
contract, breach of warranty, misrepresentation or any other legal theory, regardless of whether the
loss resulted from any general or particular requirement which MILLER knew or had reason to know
about at the time of sale.
MILLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, AS TO THE FINISHED PRODUCTS
MANUFACTURED OR SUPPLIED BY ANOTHER MANUFACTURER AND SUPPLIED BY MILLER
TO PURCHASER, including, but not limited to, any vehicle to which a MILLER product may be affixed
or any accessories or wire rope, and MILLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AS TO SUCH EQUIPMENT
OR PRODUCTS. This language shall in no way affect or diminish the rights of the purchaser to rely
on such warranties as are extended by such manufacturers or suppliers. MILLER shall, to the extent
permitted under applicable law, pass on to the purchaser such manufacturer's or seller's warranty.
MILLER, whose policy is one of continuous improvement, reserves the right to improve its products
through changes in design or materials as it may deem desirable without being obligated to incorporate
such changes in products previously sold. This warranty is not intended to cover or include the
following items, which are set forth by way of example and not limitation:
A. Normal deterioration of trim, paint, lettering, and appearance items due to wear or exposure to
weather, road conditions, road treatments, etc.
B. Any damage or defect due to accident, misuse, abuse, improper or unauthorized repairs, failure
to provide reasonable and necessary maintenance, or uses for which the equipment was not
designed or intended.
C. Alterations or modifications that affect performance, operation or reliability.
D. Normal maintenance parts including, but not limited to, wear pads, bushings, wire rope, mud
flaps, fenderettes, light bulbs, hydraulic oil, filters, and tow sling belts.
IT IS EXPRESSLY UNDERSTOOD THAT MILLER MAKES NO IMPLIED WARRANTY THAT MILLER
PRODUCTS SHALL BE FIT FOR THE PURPOSE OF LIFTING OR MOVING PEOPLE OR FOR ANY
OTHER IMPROPER USE.
Miller Industries Towing Equipment Inc.
8503 Hilltop Drive
Ooltewah, Tennessee 37363
Telephone (423) 238-4171
SERIAL NUMBER
Section VI - PARTS
This Section is provided by the manufacturer for the purpose of ordering
any component part of the CENTURY 1060 Wrecker and Super Duty
Underlift that may be required when part replacement is necessary. Be
certain to use only original equipment replacement parts for warranty
purposes as well as for keeping your CENTURY 1060 Wrecker and Super
Duty Underlift in its original state and optimum operating capacities.
When ordering replacement or spare parts be sure to provide the following
information to the manufacturerís Parts Department.
1.
2.
3.
4.
5.
6.
7.
Manual Number & Date of Publication
Manual Page Number
Page Title
Reference Number of Part Desired
Part Number
Part Description
Quantity of Part Desired
Providing this information will help ensure that the correct parts will be
delivered to you in an expedient manner without delay. Should additional
information be required for repair or replacement of certain components,
contact your Wrecker Manufacturer Authorized Representative.
The Manufacturer reserves the right, without notice or obligation, to improve
or modify their products, which may change the specifications, models and
feature availability.
VI-1
Section VI - PARTS (cont'd)
SUBFRAME ASSEMBLY
VI-2
Section VI - PARTS (cont'd)
SUBFRAME ASSEMBLY
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
10 ft.
8
20
2
2
REF.
30
4
2
4
4
4
4
4
2
4
30
2
8
4
8
2
2
2
2
2
2
1
1
1
1
2
1
1
1
1
2
0301851
0302540
0302541
0303445
0303481
0303688
0400066
0400139
0400211
0400223
0400276
0400281
0400294
0400392
0400408
0400430
0400452
0400492
0400506
0400508
0400510
0400564
0700884
0707117
0707194
0707199
0708452
0711820
0714342
0714343
0802211
0802221
0802398
0802399
0803315
0804039
GA0215
DESCRIPTION
TRIM-LOCK, 1/8"
CENTER BONDED MOUNT (BE0102)
WASHER, SPECIAL (BE0103)
SAFETY CHAIN, SYSTEM 10, 1/2" X 14'
SLIDE PAD, BUMPER
CYLINDER, REAR SPADE
SCREW, 1/4"-20 X 3/4" HEX HD CAP
SCREW, 3/8"-16 X 1-1/2" HEX SKT SET
SCREW, 1/2"-13 X 1-3/4" HEX HD CAP
SCREW, 3/8"-16 X 3/4" FL HD SKT
SCREW, 5/8"-11 X 4-1/2" HEX HD CAP
SCREW, 3/4"-10 X 3-1/2" HEX HD CAP
SCREW, 3/4"-10 X 6-1/2" HEX HD CAP
NUT, 3/8"-16 NYLOK HEX
NUT, 1/2"-13 NYLOK HEX
NUT, 3/4"-10 NYLOK HEX
LOCKWASHER, 1/4" HELICAL
WASHER, 1/2" FLAT
WASHER, 5/8" FLAT
LOCKWASHER, 5/8" HELICAL
WASHER, 3/4" FLAT
ROLL PIN, 3/8" X 1-3/4" (NOT SHOWN)
SHAFT, LOWER JACK
SHAFT, UPPER SPADE
COVER, SPADE TUBE
PIN, SPADE PAD
"D" RING, TOWING (NOT SHOWN)
FLOOR PLATE, ACCESS COVER
CHAIN BOX COVER, LT
CHAIN BOX COVER, RT
FRONT BODY MOUNTING TUBE
SPADE PAD
SPADE, LEFT INNER
SPADE, RIGHT INNER
CYLINDER COVER WELDMENT
SUBFRAME WELDMENT
PIN, "D" RING (NOT SHOWN)
VI-3
Section VI - PARTS (cont'd)
BODY ASSEMBLY
VI-4
Section VI - PARTS (cont'd)
BODY ASSEMBLY
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
28 FT.
2
6
2
1
6 ft.
1
1
1
2
6
6
6
8
38
6
8
38
6
76
2
1
1
2
4
2
2
2
2
1
1
2
2
1
1
1
1
2
1
0300345
0301223
0301912
0301934
0302562
0303056
0303708
0303709
0303061
0400016
0400035
0400061
0400066
0400122
0400288
0400369
0400392
0400431
0400451
0400566
0500406
0705090
0705091
0705092
0706609
0707174
0707175
0709453
0711286
0711289
0711290
0714176
0714177
0714272
0714273
0802224
0802225
0802226
0802260
DESCRIPTION
RUBBER FENDER
MUDFLAP
DOOR CHECK, 11"
DOOR STOP
LIGHT BAR, DELUXE (OPTIONAL)
"D" GASKET (NOT SHOWN)
LEFT TOOL COMPARTMENT, 156" C.B.
RIGHT TOOL COMPARTMENT, 156" C.B.
BACK UP ALARM (NOT SHOWN)
SCREW, #8-32 x 1" FL PHIL HD
SCREW, #10-24 X 1/2" OVAL HD SELF-TAP
SCREW, 1/4"-20 X 3/4" PAN HD SLOTTED
SCREW, 1/4"-20 X 3/4" HEX HD CAP
SCREW, 3/8"-16 X 1-1/4" HEX HD CAP
SCREW, 3/4"-10 X 2-1/2" HEX HD CAP GR8
CLIP, 1/4" TINNERMAN
NUT, 3/8"-16 NYLOK HEX
NUT, 3/4"-10 NYLOK HEX GR8
WASHER, 1/4" FLAT
RIVET, 1/4"
CENTURY NAMEPLATE
MUDFLAP MTG ANGLE, LEFT
MUDFLAP MTG ANGLE, RIGHT
BAR, MUDFLAP
RETAINING STRIP, FENDER
TAILGATE MOUNTING ANGLE
MOUNTING PLATE
MOUNTING PLATE
SPACER, REAR FRAME BRACKET
SWITCH PANEL, RIGHT
CONTROL PANEL, RIGHT
GASKET, BASE ANGLE (NOT SHOWN)
GASKET (NOT SHOWN)
GAUGE PANEL
CONTROL PANEL
VERTICAL SUPPORT, L.H.
VERTICAL SUPPORT, R.H.
MOUNTING BRACKET
TOP CHANNEL
VI-5
Section VI - PARTS (cont'd)
SDU2 ASSEMBLY
VI-6
Section VI - PARTS (cont'd)
SDU2 ASSEMBLY
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
4
15
4
1
2
1
3
3
1
1
1
2
2
1
2
8
2
6
4
1
4
2
8
8
2
1
8
8
6
2
1
2
1
1
1
0300110
0300113
0300329
0301197
0301397
0301398
0301817
0301818
0301822
0302537
0303088
0303097
0303098
0303501
0303902
0400044
0400139
0400151
0400196
0400219
0400228
0400271
0400288
0400306
0400392
0400408
0400430
0400437
0400481
0400508
0703233
0703277
0707179
0708470
0709242
DESCRIPTION
SNAP RING, 1"
GREASE FITTING
SNAP RING, 2" EXTERNAL
COMPRESSION SPRING
GREASE FITTING, 90∞
STEEL BALL,1-3/16"
SLIDE PAD
SLIDE PAD
O-RING, PIVOT PIN
FOLD CYLINDER
BUSHING, PIVOT PIN
THRUST WASHER, 1/8"
THRUST WASHER, 1/16"
EXTEND CYLINDER
TILT CYLINDER
DRIVE SCREW, #10 X 1/2" RD HD
SCREW, 3/8"-16 X 1-1/2" HEX SKT SET
SCREW, 3/8"-24 X 3/4" HEX HD CAP
SCREW, 1/2"-13 X 1-1/4" SKT HD CAP
SCREW, 1/2"-13 X 4-1/2" HEX HD CAP
SCREW, 3/8"-24 X 5/8" BUTTON HD SKT
SCREW, 5/8"-11 X 4-1/2" SKT HD CAP
SCREW, 3/4"-10 X 2-1/2" HEX HD CAP GR8
SCREW, 7/8"-9 X 3" HEX HD CAP GR8
NUT, 3/8"-16 NYLOK HEX
NUT, 1/2"-13 NYLOK HEX
NUT, 3/4"-10 NYLOK HEX
NUT, 7/8"-9 NYLOK HEX
LOCKWASHER, 3/8" EXTERNAL TOOTH
LOCKWASHER, 5/8" HELICAL
STOP PLATE
SLIDER PAD
PIN
SPACER, DETENT BALL
PIN, MAIN PIVOT
VI-7
REF.
NO.
NO.
REQ'D
PART
NUMBER
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
1
1
2
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
0710051
0710052
0710450
0712174
0712195
0712213
0714209
0714218
0714219
0714240
0802914
0803441
0803442
0804029
0804030
0804032
0804034
0804035
0804036
HC0159
HD0152
UK0126
-58
59
60
61
62
63
64
65
66
67
-2
4
2
1
4
4
2
8
4
2
0904785
0400082
0400191
0400366
0400367
0400413
0703484
0703487
0703488
0714388
AWS-1011-A
DESCRIPTION
PIVOT PIN, TOP HALF
PIVOT PIN, BOTTOM HALF
RETRACT BAR
SHAFT, EXTEND CYLINDER INNER BOOM
SHAFT, EXTEND CYLINDER OUTER BOOM
STOP PLATE
PIVOT PIN
PIN, TILT CYLINDER ROD END
PIN, LIFT CYLINDER ROD END
PIN, FOLD CYLINDER
CROSSBAR WELDMENT
2ND STAGE BOOM WELDMENT
INNER BOOM WELDMENT
OUTER BOOM WELDMENT
OUTER MAST WELDMENT
INNER MAST WELDMENT
TILT CYLINDER MOUNTING BRACKET
LEFT PIVOT SUPPORT WELDMENT
RIGHT PIVOT SUPPORT WELDMENT
LIFT CYLINDER
SNAP RING, 3" EXTERNAL
PIN, TILT CYLINDER BASE END
HOSE TENSION KIT (NOT SHOWN)
EYEBOLT, 1/4"-20 X 1-1/8"
SCREW, 1/2"-13 X 3-3/4" HEX HD CAP
NUT, 1/4"-20 HEX
NUT, 1/4"-20 NYLOK HEX
NUT, 1/2"-20 NYLOK HEX
PULLEY, HOSE TENSIONER
BRACKET, HOSE TENSIONER PULLEY
WASHER, HOSE TENSIONER PULLEY
ANGLE, NYLON SHEAVE
CLAW SPRING
Section VI - PARTS (cont'd)
SDU2 LIFT & EXTEND HYDRAULICS
VI-8
Section VI - PARTS (cont'd)
SDU2 LIFT & EXTEND HYDRAULICS
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
2
1
2
2
2
1
1
2
2
2
2
2
REF.
2
2
1
1
1
2
2
2
1
1
0300044
0300644
0301425
0301470
0301620
0301731
0301782
0301998
0302065
0302510
0302575
0303017
0303093
0303170
0303187
0303501
0303967
0303968
0400078
0400367
0400451
0703001
HC0159
DESCRIPTION
CONNECTOR, 6MJ-8MB
HOSE CLAMP, 8"
CONNECTOR, 6MJ-6MP
ELBOW, 6MJ-8MB90
ELBOW, 6MJ-6MB90
HOLDING VALVE
MALE RUN TEE, 6MJ-4MP-6MJ
HOSE ASSEMBLY, 24"
CAP, 6MJ
ADAPTER, 6MJ-6MBL
BULKHEAD RUN TEE, 6MJ
CONNECTOR, 8MB-6FB
CONTROL VALVE, VDP11DDDC110
HOSE ASSEMBLY, 75"
HOSE ASSEMBLY, 141"
EXTEND CYLINDER
HOSE ASSEMBLY, 7"
HOSE ASSEMBLY, 10"
SCREW, 1/4"-20 X 2" HEX HD CAP
NUT, 1/4"-20 HEX NYLOK
WASHER, 1/4" FLAT
BRACKET, CHECK VALVE MOUNTING
LIFT CYLINDER
VI-9
Section VI - PARTS (cont'd)
SDU2 TILT & FOLD HYDRAULICS
VI-10
Section VI - PARTS (cont'd)
SDU2 TILT & FOLD HYDRAULICS
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
3
1
3
2
2
4
1
1
1
2
2
1
2
1
5
2
2
2
REF.
2
4
4
4
1
0300044
0300365
0301388
0301425
0301619
0301620
0301730
0301731
0301782
0301837
0301997
0301998
0302510
0302537
0302808
0302813
0302886
0303017
0303093
0303902
0400078
0400367
0400451
0703001
DESCRIPTION
CONNECTOR, 6MJ-8MB
CLAMP, CHECK VALVE RETAINING, 7"
ELBOW, 8MJ-8MB90
CONNECTOR, 6MJ-6MP
BRANCH TEE, 6MJ-6MJ-6MB
ELBOW, 6MJ-6MB90
DOUBLE HOLDING VALVE
HOLDING VALVE
MALE RUN TEE, 6MJ-4MP-6MJ
INLINE ORIFICE
HOSE ASSEMBLY, 18"
HOSE ASSEMBLY, 24"
ADAPTER, 6MJ-6MBL
FOLD CYLINDER
HOSE ASSEMBLY, 18"
HOSE ASSEMBLY, 108"
HOSE ASSEMBLY, 45"
CONNECTOR, 8MB-6FB
CONTROL VALVE, VDP11DDDC110
TILT CYLINDER
SCREW, 1/4"-20 X 2" HEX HD CAP
NUT, 1/4"-20 HEX NYLOK
WASHER, 1/4" FLAT
BRACKET, CHECK VALVE MOUNTING
VI-11
Section VI - PARTS (cont'd)
SDU2 LIFT ADAPTERS
KING PIN & FIFTH WHEEL ADAPTER
VI-12
Section VI - PARTS (cont'd)
SDU2 LIFT ADAPTERS
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
2
2
2
2
2
2
2
2
2
4
1
1
2
1
1
2
2
8
0200018
0200019
0200020
0200021
0200022
0200023
0200024
0400585
0711002
0800590
0801186
0801187
0801459
0803591
0803592
0802810
0900900
0902321
DESCRIPTION
FORK, SHORT 3" OPENING
FORK, SHORT 4-1/2" OPENING
FORK, MEDIUM 3" OPENING
FORK, MEDIUM 4-1/2" OPENING
FORK, LONG 3" OPENING
FORK, LONG 4-1/2" OPENING
FORK, OFFSET REAR AXLE 6" OPENING
HAIR PIN COTTER, 1-1/4"
BOLT, MODIFIED 5/8"-11 X 6" WITH HOLE
TEE HANDLE, FORK ADAPTER
CHAIN HOOK ADAPTER, RT
CHAIN HOOK ADAPTER, LT
RISER BRACKET
OFFSET FORK ADAPTER, LT
OFFSET FORK ADAPTER, RT
SPRING LIFT BRACKET
RETAINING PIN ASSEMBLY
RETAINER PIN, SPRING LIFT BRACKET
KING PIN ADAPTER
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
1
0803605
KING PIN ADAPTER WELDMENT
2
3
4
5
6
-1
2
1
1
1
0902782
0400555
HD1259
VA0660
VA0661
VA0662
FIFTH WHEEL ADAPTER (COMPLETE)
ROLL PIN, 3/8" X 1-1/2"
PIN, SNAPPER
5TH WHEEL PIVOT PLATE WELDMENT
PULL PIN WELDMENT
PIVOT PIN WELDMENT
7
8
9
10
-1
4
4
1
124002211
0302198
0400176
0400491
0803604
11
2
0902378
DESCRIPTION
PINTLE HOOK KIT (COMPLETE)
PINTLE HOOK (NOT SHOWN)
SCREW, 1/2"-13 X 1" HEX HD CAP
LOCKWASHER, 1/2" HELICAL
5TH WHEEL, KING PIN ADAPTER, & PINTLE
HOOK BRACKET
RETAINING PIN ASSEMBLY
VI-13
Section VI - PARTS (cont'd)
WRECKER FRAME ASSEMBLY
VI-14
Section VI - PARTS (cont'd)
WRECKER FRAME ASSEMBLY
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
1
3
1
1
1
REF.
2
1
2
12
2
1
16
16
8
6
2
2
1
32
14
2
12
14
1
1
2
1
4
1
0300076
0300117
0300273
0301081
0301541
0303092
0303504
0305006
0400061
0400121
0400172
0400180
0400287
0400288
0400333
0400334
0400366
0400392
0400407
0400431
0400443
0400452
0400481
0400518
0700487
0701316
0703737
0703738
0711998
0803433
DESCRIPTION
LICENSE PLATE BRACKET
RUBBER GROMMET, #316
LICENSE PLATE ILLUMINATOR
CAP PLUG (NOT SHOWN)
SIGHT GAUGE, TYPE S-1
CYLINDER, BOOM LIFT
WINCH, DP MODEL S50-50K
FILLER CAP
SCREW, 1/4"-20 x 3/4" PAN HD SLOTTED
SCREW, 3/8"-16 X 3/4" HEX HD CAP
SCREW, 3/8"-16 X 3-1/2" HEX HD CAP
SCREW, 1/2"-13 X 6" HEX HD CAP
SCREW, 3/4"-10 X 3-1/2" HEX HD CAP
SCREW, 3/4"-10 X 2-1/2" HEX HD CAP
SCREW, 1"-8 X 4-1/2" HEX HD CAP
SCREW, 1"-8 X 3-1/2" HEX HD CAP
NUT, 1/4"-20 HEX
NUT, 3/8"-16 NYLOK HEX
NUT, 1/2"-13 HEX
NUT, 3/4"-10 NYLOK HEX
NUT, 1"-8 NYLOK HEX
LOCKWASHER, 1/4" HELICAL
LOCKWASHER, 3/8" HELICAL
WASHER, 1" FLAT
CLEAN OUT COVER
COVER GASKET
SHAFT, LIFT CYLINDER PIVOT
SHAFT, BOOM
ANGLE, WINCH MOUNTING
WRECKER FRAME WELDMENT
VI-15
Section VI - PARTS (cont'd)
BOOM ASSEMBLY
VI-16
Section VI - PARTS (cont'd)
BOOM ASSEMBLY
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
8
2
2
6
2
4
2
2
8
2
2
2
4
2
20
2
4
6
2
6
2
1
1
1
1
1
1
1
1
0300113
0301691
0301923
0301924
0302273
0305023
0305031
0400122
0400126
0400130
0400141
0400205
0400248
0400392
0400482
0400408
0400508
0400557
0700778
0703734
0703736
0703739
0703740
0706042
0706043
0801085
0804024
0901673
0901674
DESCRIPTION
GREASE FITTING
OBLONG MASTER LINK
SLIDE PAD, BOOM BOTTOM
SLIDE PAD, BOOM SIDE
SPRING, WINCH CABLE TIE BACK
SNAP RING
SLIDE PAD, INNER BOOM
SCREW, 3/8"-16 X 1-1/4" HEX HD CAP
SCREW, 3/8"-16 X 1" HEX HD CAP
SCREW, 3/8"-16 X 3-1/2" HEX HD CAP
SCREW, 3/8"-16 X 7/8" HEX HD CAP
SCREW, 1/2"-13 X 3" HEX HD CAP
SCREW, 5/8"-11 X 1" HEX HD CAP
NUT, 3/8"-16 HEX NYLOK
LOCKWASHER, 3/8" HELICAL
NUT, 1/2"-13 HEX NYLOK
LOCKWASHER, 5/8" HELICAL
ROLL PIN, 1/2" X 1-1/4"
TOP SPACER, OUTER BOOM
SHIM, OUTER BOOM SIDE PLATE
SHAFT, CYLINDER PIVOT
SHAFT, EXTEND CYLINDER ROD END
SHAFT, EXTEND CYLINDER BASE END
CABLE WING, LONG
CABLE WING, MEDIUM
OUTER BOOM
INNER BOOM
BOOM SWIVEL ASSEMBLY, LEFT
BOOM SWIVEL ASSEMBLY, RIGHT
VI-17
Section VI - PARTS (cont'd)
WRECKER HYDRAULICS
(LESS BOOM ELEVATION HYDRAULICS)
VI-18
Section VI - PARTS (cont'd)
WRECKER HYDRAULICS
(LESS BOOM ELEVATION HYDRAULICS)
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
2
1
2
1
2
4
REF.
2
2
1
4
1
8
REF.
2
0300659
0301376
0301388
0301445
0301893
0301982
0302296
0302827
0302828
0302830
0303079
0303176
0303349
0303504
0303590
DESCRIPTION
HOSE ASSEMBLY, 45"
CONNECTOR, 8MJ-10MB
ELBOW, 8MJ-8MB90
EXTENDED CONNECTOR, 8MJ-8MB
HOSE ASSEMBLY, 84"
BULKHEAD ELBOW w/ NUT, 12MJ90
CONTROL VALVE, VDP12CDD118
CONNECTOR, 10MJ-10MB
EXTENDED CONNECTOR, 10MJ-10MB
CYLINDER, EXTEND
CONNECTOR, 10MJ-8MB
ADAPTER, 10MB-8FB
HOSE ASSEMBLY, 81"
WINCH, DP MODEL S50-50K (NOT SHOWN)
BULKHEAD ELBOW w/NUT, 8MJ90
VI-19
Section VI - PARTS (cont'd)
BOOM ELEVATION HYDRAULICS
VI-20
Section VI - PARTS (cont'd)
BOOM ELEVATION HYDRAULICS
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
2
4
1
2
2
1
1
1
2
1
2
1
2
5
2
1
REF.
2
1
5
5
1
1
1
1
1
1
1
1
1
0300040
0300113
0300644
0300761
0300762
0300763
0300766
0300767
0300901
0301376
0301388
0301445
0301471
0301487
0301712
0301906
0302296
0303092
0303176
0400066
0400367
0701680
0709708
0709709
0709710
0709711
0709712
0709713
0802883
HC1413
DESCRIPTION
CONNECTOR, 8MJ-8MP
GREASE FITTING
HOSE CLAMP, 8"
STRAIGHT ADAPTER
MALE CONNECTOR
MALE ELBOW
MALE BRANCH TEE
TEE UNION
ELBOW
CONNECTOR, 8MJ-10MB
ELL, 8MJ-8MB90
EXTENDED CONNECTOR, 8MJ-8MB
HOSE ASSEMBLY, 30"
HOSE CLAMP, 1/2"
HOSE ASSEMBLY, 64"
HOLDING VALVE
CONTROL VALVE, VDP12CDD118
BOOM LIFT CYLINDER
ADAPTER, 10MB-8FB
SCREW, 1/4"-20 X 3/4" HEX HD CAP
NUT, 1/4"-20 HEX NYLOK
CLAMP BRACKET, HYD TUBE
TUBE, LIFT CYLINDER HYDRAULIC
TUBE, EXT. LIFT CYLINDER HYDRAULIC
TUBE, EXT. LIFT CYLINDER HYDRAULIC
TUBE, EXT. LIFT CYLINDER HYDRAULIC
TUBE, LIFT CYLINDER HYDRAULIC
TUBE, LIFT CYLINDER HYDRAULIC
HOLDING VALVE BRACKET WELDMENT
TEE FITTING
VI-21
Section VI - PARTS (cont'd)
PUMP, VALVE & FILTER HYDRAULICS
VI-22
Section VI - PARTS (cont'd)
PUMP, VALVE & FILTER HYDRAULICS
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
1
2
18 FT.
4
4
1
1
15 ft.
1
1
1
2
1
2
1
1
1
2
1
1
2
2
2
1
4
2
2
3
1
2
2
3
1
2
2
2
1
2
2
1
4
4
0300052
0300056
0300058
0300071
0300364
0300434
0300446
0300558
0300660
0300666
0300671
0300692
0301373
0301545
0301547
0301695
0301836
0301894
0301904
0301905
0301961
0301965
0301995
0302052
0302108
0302169
0302170
0302205
0302242
0302296
0302367
0302577
0302757
0302826
0302829
0302901
0302931
0302932
0303093
0303182
0400177
0400491
DESCRIPTION
ELBOW, 8MJ-10MB90
BARB, 16C4-16MP
SUCTION HOSE, 1"
HOSE CLAMP, 1"
HOSE CLAMP, 1" - 2-1/4"
HOSE BARB, 2" 32C4-32MP
PIPE PLUG, 3/4" MALE
SUCTION HOSE, 2"
HOSE ASSEMBLY, 120"
BARB, 24C4-24MP
SUCTION HOSE, 1-1/2"
STREET ELBOW, 1" 90∞
PIPE BUSHING
ELBOW, 12MJ-12MB90
ELBOW, 8MJ-12MB90
HOSE ASSEMBLY, 91"
HYDRAULIC PUMP
SPIN-ON FILTER ASSEMBLY
ELBOW, 8MJ-12FL90
O-RING FLANGE KIT, 12FH
BALL VALVE, BRONZE
HOSE ASSEMBLY, 131"
ADAPTER, 8FJ-6MJ
RUN TEE, 8MJ-8FJX-8MJ
REDUCER BUSHING, 20MP-16FP
O-RING CONNECTOR, 16MJ-12MB
BENT TUBE SWIVEL, 16C2-16FJX90
GAUGE, FLUSH MOUNT, 6000 PSI
FLANGE FITTING, 24FL-24HOSE90
CONTROL VALVE, VDP12CDD118
PIPE NIPPLE, 2" x 4"
CONNECTOR, 6MJ-4FP
CONNECTOR, 8MJ-16MB
TEE, 12MJ-12FJX-12MJ
ADAPTER, 12FJ-6MJ
HOSE ASSEMBLY, 120"
ELBOW, FLANGE 24-32FL90 w/ FLANGE KIT
ELBOW, 12MJ-20FL90 w/ FLANGE KIT
CONTROL VALVE, VDP11DDDC110
HOSE ASSEMBLY, 41"
SCREW, 1/2"-13 X 1-1/4" HEX HD CAP
LOCKWASHER, 1/2" HELICAL
VI-23
Section VI - PARTS (cont'd)
LEFT CONTROL ASSEMBLY
VI-24
Section VI - PARTS (cont'd)
LEFT CONTROL ASSEMBLY
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
2
1
2
1
2
1
2
1
10
1
10
1
1
1
2
4
2
4
10
10
4
10
10
10
2
1
1
10
1
0300834
0300835
0300836
0300837
0301884
0301969
0302455
0302457
0302726
0302856
0303008
0303380
0303381
0303382
0400066
0400107
0400367
0400382
0400383
0400393
0400451
0400512
0400532
0400541
0711235
0711245
0714265
0803294
0804081
KNOB, IN-OUT
KNOB, BOOM UP-DOWN
KNOB, JACK UP-DOWN
KNOB, BOOM IN-OUT
CONTROL CABLE, 96"
CONTROL CABLE, 84"
CONTROL CABLE, 79"
CONTROL CABLE, 104"
GREASE FITTING, 1/4"-28 X 45∞
KNOB, TILT UP-DOWN
ADJUSTABLE CLEVIS
KNOB, UNDERLIFT IN-OUT
KNOB, UNDERLIFT UP-DOWN
KNOB, FOLD UP-DOWN
SCREW, 1/4"-20 X 3/4" HEX HD CAP
SCREW, 5/16"-18 X 2-1/2" HEX HD CAP
NUT, 1/4"-20 HEX NYLOK
NUT, 5/16"-18 HEX NYLOK
NUT, 5/16"-24 HEX
NUT, 3/8"-16 HEX JAM
WASHER, 1/4" FLAT
WASHER, 3/4" FLAT (SPECIAL)
CLEVIS PIN, 5/16" X 1"
COTTER PIN, 1/16" X 3/4"
SHAFT CLAMP, CONTROL BOX
SHAFT SUPPORT PLATE
PIN, CONTROL BOX
CONTROL HANDLE WELDMENT
CONTROL FRAME WELDMENT
-30
31
32
-3
9
27
0903820
0303008
0400112
0400383
LEFT & RIGHT SIDE CONTROL LINK KIT
ADJUSTABLE CLEVIS
SCREW, 5/16"-24 X 1-1/4" HEX HD CAP
NUT, 5/16"-24 HEX
DESCRIPTION
REF.
NO.
NO.
REQ'D
PART
NUMBER
33
34
35
9
24
6
0400384
0400466
0801054
NUT, 5/16"-24 HEX NYLOK
LOCKWASHER, 5/16" INTERNAL TOOTH
CONTROL CABLE CONNECTOR
-36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
-10
1
15 FT.
2
2
35
1
16
1
1
1
8 FT.
4
1
1
1
1
2
4
2
2
6
4
2
4
1
4
1
0904364
0300166
0301574
0301577
0301610
0301618
0302434
0302677
0302678
0302844
0303226
0303235
0303322
0303335
0303363
0303364
0303365
0303781
0400025
0400057
0400078
0400351
0400367
0400401
0400451
0400527
0711277
0803181
HA0132
4 FUNCTION REMOTE CONTROL (Not Shown)
WIRE CONNECTOR, SPADE
ELBOW, 4TB-4MP90
AIR HOSE, 1/4" O.D.
CONNECTOR, 4TB-4MP
BRASS PLUG, 4MP
CABLE TIE, 4"
BREATHER VENT, 2MP
ELBOW, 4MP-2MP90
AIR SOLENOID VALVE, 8 POSITION
CIRCUIT BREAKER, HI-AMP WATERPROOF
TERMINAL BLOCK
ELECTRICAL CABLE, 16/10 SO
AIR CYLINDER
AIR FILTER/REGULATOR
AIR LUBRICATOR
MOUNTING BRACKET
POWER PAL, 8 POSITION
SCREW, #8-32 X 3/4" RD HD SLOTTED SS
SCREW, 1/4"-20 X 1-1/4" HEX HD CAP
SCREW, 1/4"-20 X 2" HEX HD CAP
HEX NUT & STAR WASHER, #8-32
NUT, 1/4"-20 HEX NYLOK
NUT, 7/16"-20 HEX JAM
WASHER, 1/4" FLAT
CLEVIS PIN, 5/16" X 5/8"
SUPPORT, SOLENOID VALVE
CLEVIS WELDMENT
GAUGE, 0-160 PSI
DESCRIPTION
VI-25
Section VI - PARTS (cont'd)
RIGHT CONTROL ASSEMBLY
VI-26
Section VI - PARTS (cont'd)
RIGHT CONTROL ASSEMBLY
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
2
1
2
1
3
1
1
6
6
1
4
4
6
6
7
6
6
2
1
6
1
0300834
0300835
0300836
0300837
0301884
0301969
0302457
0302726
0303008
0303427
0400107
0400382
0400383
0400393
0400512
0400532
0400541
0711235
0711247
0803294
0804061
DESCRIPTION
KNOB, IN-OUT
KNOB, BOOM UP-DOWN
KNOB, JACK UP-DOWN
KNOB, BOOM IN-OUT
CONTROL CABLE, 96"
CONTROL CABLE, 84"
CONTROL CABLE, 104"
GREASE FITTING, 1/4"-28 X 45∞
ADJUSTABLE CLEVIS
CONTROL CABLE, 114"
SCREW, 5/16"-18 X 2-1/2" HEX HD CAP
NUT, 5/16"-18 HEX NYLOK
NUT, 5/16"-24 HEX
NUT, 3/8"-16 HEX JAM
WASHER, 3/4" FLAT (SPECIAL)
CLEVIS PIN, 5/16" X 1"
COTTER PIN, 1/16" X 3/4"
SHAFT CLAMP, CONTROL BOX
PIN
CONTROL HANDLE WELDMENT
CONTROL FRAME WELDMENT
VI-27
Section VI - PARTS (cont'd)
SPADE HYDRAULICS
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
4
2
2
4
REF.
4
2
4
2
0300040
0301376
0301445
0301816
0302296
0302980
0303176
0303588
0303688
DESCRIPTION
CONNECTOR, 8MJ-8MP
CONNECTOR, 8MJ-10MB
EXTENDED CONNECTOR, 8MJ-8MBL
FITTING, 8FP-8FP45
CONTROL VALVE, VDP12CDD118
PIPE NIPPLE, BLACK 1/2" X 5"
CONNECTOR, 10MB-8FB
HOSE ASSEMBLY, 108"
SPADE CYLINDER
VI-28
Section VI - PARTS (cont'd)
HYDRAULIC CYLINDERS - UNDERLIFT
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
1
HC0159
0304522
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
1
0303501
SK10988
DESCRIPTION
UNDERLIFT LIFT CYLINDER
SEAL KIT, UNDERLIFT LIFT CYLINDER
DESCRIPTION
UNDERLIFT EXTEND CYLINDER
SEAL KIT, UNDERLIFT EXTEND CYLINDER
VI-29
Section VI - PARTS (cont'd)
HYDRAULIC CYLINDERS - UNDERLIFT
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
1
0302537
0304459
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
2
0303902
SCH0303902
DESCRIPTION
UNDERLIFT FOLD CYLINDER
SEAL KIT, UNDERLIFT FOLD CYLINDER
DESCRIPTION
UNDERLIFT TILT CYLINDER
SEAL KIT, UNDERLIFT TILT CYLINDER
VI-30
Section VI - PARTS (cont'd)
HYDRAULIC CYLINDERS - WRECKER
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
2
0303092
0304334
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
1
0302830
0304333
DESCRIPTION
BOOM LIFT CYLINDER
SEAL KIT, BOOM LIFT CYLINDER
DESCRIPTION
BOOM EXTEND CYLINDER
SEAL KIT, BOOM EXTEND CYLINDER
VI-31
Section VI - PARTS (cont'd)
HYDRAULIC CYLINDERS - REAR SPADE
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
2
0303688
0300830
DESCRIPTION
SPADE CYLINDER
SEAL KIT, SPADE CYLINDER
VI-32
Section VI - PARTS (cont'd)
BOOM END SWIVEL ASSEMBLY
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
1
1
2
1
3
2
1
1
1
1
0300113
0300311
0400133
0400140
0400392
0700511
0700563
0802027
0803577
0803578
DESCRIPTION
GREASE FITTING
SHEAVE, 10"
SCREW, 3/8"-16 X 3" HEX HD CAP
SCREW, 3/8"-16 X 4" HEX HD CAP
NUT, 3/8"-16 NYLOK HEX
CABLE GUIDE, BOTTOM
SHAFT, SHEAVE
CABLE GUIDE WELDMENT
SWIVEL WELDMENT, LEFT
SWIVEL WELDMENT, RIGHT
VI-33
Section VI - PARTS (cont'd)
MODULAR LIGHT KIT
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
2
24
0302542
0302543
0400025
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
1
3
24
0300442
0300507
0400025
DESCRIPTION
LIGHT, STOP & TURN
LIGHT, CLEAR BACKUP
SCREW, #8-32 X 3/4" RD HD SLOTTED
DESCRIPTION
3-LIGHT BAR ASSEMBLY (COMPLETE)
BULB, MARKER LIGHT
LENS, 3-LIGHT BAR
VI-34
Section VI - PARTS (cont'd)
MODULAR LIGHT KIT
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
4
2
0302201
0302611
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
18
0302544
DESCRIPTION
LIGHT, FLOOD (COMPLETE)
LIGHT, AMBER OVAL (COMPLETE)
DESCRIPTION
LIGHT, DOME (COMPLETE)
VI-35
Section VI - PARTS (cont'd)
MODULAR LIGHT KIT
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
1
1
1
0300076
0300273
0300512
DESCRIPTION
LICENSE PLATE BRACKET
LICENSE PLATE ILLUMINATOR
BULB, LICENSE PLATE ILLUMINATOR
VI-36
Section VI - PARTS (cont'd)
GLAD HAND ASSEMBLY
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1
1
2
2
2
1
1
1
9
2
2
6
2
1
1
1
1
1
0301862
0301909
0301944
0301945
0301946
0301947
0301948
0302534
0400062
0400070
0400367
0400451
0400463
0703795
0706925
0710003
0710444
0802151
DESCRIPTION
CATERPILLAR GROMMET
RECEPTACLE BOOT
GLAD HAND COUPLING
GLAD HAND BOOT
BULKHEAD CONNECTOR
45∞ ADAPTER, 1/4" NPM X 3/8" SYN. HOSE
HD 7-WAY TRAILER CONNECTOR
45∞ ELBOW, 1/4" NPM X 1/2" SYN. HOSE
SCREW, 1/4"-20 X 3/4" HEX HD SELF-TAP
SCREW, 1/4"-20 X 1" HEX HD CAP
NUT, 1/4"-20 HEX NYLOK
WASHER, 1/4" FLAT
WASHER, 5/16" FLAT
HOSE, 3/8" X 4 FT. SYNTHETIC
HOSE, 1/2" X 4 FT. SYNTHETIC
SUPPORT, GLAD HAND BOX (NOT SHOWN)
LID, GLAD HAND HOUSING
GLAD HAND HOUSING
VI-37
Section VI - PARTS (cont'd)
TRUCK WHEEL LIFT
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
2
2
2
1
1
1
1
2
4
2
2
0301932
0300311
0303680
0802839
0802841
0802842
0802877
0902947
0903089
0903480
CH0100
DESCRIPTION
5/16" X 12' H.T. CHAIN ASSEMBLY (N.S.)
RATCHET WITH HOOK (N.S.)
TIE DOWN STRAP, ADJUSTABLE (N.S.)
TIRE SUPPORT, RIGHT
OUTER CROSSTUBE, LEFT
OUTER CROSSTUBE, RIGHT
TIRE SUPPORT, LEFT
CROSSTUBE RETAINER PIN
RETAINER PIN
ADJUSTMENT TUBE
5/16" HOOK WITH PIN (NOT SHOWN)
VI-38
NOTES
CENTURYÆ
Miller Industries Towing Equipment Inc.
8503 Hilltop Drive • Ooltewah, Tennessee 37363 • (423) 238-4171
www.millerind.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement