Optoma TX610ST Data Sheet

Datasheet – TX610ST

TX610ST

− Multimedia Projector

Larger 3D Image at Short Distance

The Optoma TX610st, a short throw projector, is designed with multitude of features to meet the demands in schools, colleges and businesses. With high brightness, contrast and sharpness, the TX610st produces a jaw dropping 3D image with details never seen before to keep your audience connected. With features such as 10 watts speaker system, closed captions, Crestron RoomView® and many more, makes the projector an all-in-one powerhouse.

* 3D content can be viewed with active LCD shutter glasses when the projector is

connected to a computer with a compatible 3D graphics card. Please visit

www.optoma.com for more information.

Features

 Projects 72” diagonal image at just 3 feet

 Impressive brightness, colors and clarity keeps audience connected

 Powerful audio – built-in 10 watts speaker system

 3D capable via DLP ® Link™ technology up-to 720p resolution

 Crestron RoomView ® for remote management and control

 Presentation-friendly remote control

NO FILTER

REQUIRED

Specifi cations

Display Technology

Single 0.55" DC3 DMD DLP

Technology by Texas Instruments

Computer Compatibility

UXGA, WXGA, SXGA+, SXGA, XGA,

SVGA, VGA Resized, VESA, PC and

Macintosh Compatible

Dimensions (W x H x D)

12” x 4.5” x 9.6”

(306 x 114 x 243 mm)

Resolution

Native XGA (1024 x 768)

Maximum Resolution

UXGA (1600 x 1200)

Brightness (Typical)

3000 ANSI Lumens

Contrast Ratio

3000:1 (Full On/Full Off)

Lamp Life and Type*

4000/3000 Hours (STD/Bright)

230W P-VIP

Throw Ratio

0.626 (Distance/Width)

Projection Distance

1.64" to 8.2" (0.5 to 2.5m)

Image Size (Diagonal)

39.3" to 196.5" (1 to 5m)

Offset

115%

Displayable Colors

1.07 Billion

Uniformity

85%

Audio

Two 5-Watt Speakers

Noise Level (STD/BRIGHT)

29dB/31dB

Video Compatibility

NTSC, PAL, SECAM, SDTV (480i), EDTV

(480p), HDTV (720p, 1080i/p)

3D Compatibility

120Hz Frame Sequential 3D for

Resolutions Up to 720p, 60Hz Field

Sequential 3D for Resolutions Up to 480i

Monitor Loop Through

D-Sub 15-Pin VGA Output

(Functional in Both Normal and Standby

Modes)

Projection Lens

F=2.8, f=7.04mm, Manual Focus

Closed Captioning

Enabled via on-screen menu

User Controls

Complete On-Screen Menu

Adjustments in 25 Languages

I/O Connectors

HDMI, Two VGA-In, VGA-Out, S-Video,

Composite Video, RCA Stereo Audio-In,

Stereo Audio-In, Stereo Audio-Out,

Microphone-In, RJ45, RS-232, USB and

12V trigger

Security

Kensington® Lock, Security Bar and

Keypad Lock

Projection Method

Front, Rear, Ceiling Mount, Table Top

Keystone

±40 Vertical

Horizontal Scan Rate

15.3 - 91.1 KHz

Vertical Refresh Rate

24 - 85, 120 Hz

Operating Temperature

41 to 104°F (5 to 40°C), 85% Max

Humidity

Power Supply

AC Input 100-240V, 50-60Hz,

Auto-Switching

Power Consumption

325 Watts Max (Bright), 250 Watts

(STD), <1 Watt (Standby)

Standard Accessories

AC Power Cord, VGA to VGA Cable,

Remote Control, Batteries for

Remote, Lens Cap, Multilingual

CD-ROM User’s Manual, Quick Start

Card and Warranty Card

Optional Accessories

HDMI Cable, Microphone, Wall

Mount, Ceiling Mount, Component to VGA Cable, Composite Video

Cable, RS-232 Cable and

Panoview™ Series Screens

Warranty

3 Years Optoma Express Replacement Service, 1 Year on Lamp

Remote Control

IR Remote Mouse Control

Weight

6.9lbs (3.1kg)

UPC

796435 41 203 6

* Lamp life is dependent upon many factors, including lamp mode, display mode, usage, environmental conditions and more. Lamp brightness can decrease over time.

www.optoma.com

© Copyright 2010 Optoma Technology, Inc. DLP ® and the DLP logo are registered trademarks of Texas Instruments. All other trademarks are the property of their

respective owners. All specifications subject to change at any time.