PRO-3GSDIHDMI 3G-SDI Extender with HDMI Scaler OPERATION MANUAL

PRO-3GSDIHDMI
3G-SDI Extender with HDMI Scaler
OPERATION MANUAL
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer file, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2011 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
3
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE
SUMMARY OF CHANGE
VR0
25/03/11
Preliminary Release
VR1
28/09/11
Add Support Timing
VS2
11/07/12
Updated format/diagrams/SDI
standards
VS3
19/07/12
First release
VR4
18/12/13
SDI Cable Spec. Distance Typo
4
CONTENTS
1. Introduction�������������������������������������������6
2. Applications�������������������������������������������6
3. Package Contents����������������������������������6
4. System Requirements���������������������������6
5. Features��������������������������������������������������7
6. Operation Controls and Functions�������8
6.1 Front Panel��������������������������������������������������� 8
6.2 Rear Panel����������������������������������������������������� 9
6.3 OSD Menu and Function List���������������10
6.3.1 Display�����������������������������������������������������12
6.3.2 Colour�������������������������������������������������������12
6.3.3 SDI Audio������������������������������������������������13
6.3.4 Factory Reset�����������������������������������������13
6.3.5 Information��������������������������������������������14
7. Connection Diagram�������������������������� 15
8. Specifications�������������������������������������� 16
9. Acronyms��������������������������������������������� 17
5
1. INTRODUCTION
T​ he PRO-3GSDIHDMI Extender with HDMI Scaler allows SD-SDI, HD-SDI,
and 3G-SDI signals to be displayed on HDMI or SDI screens. These signals
can be extended over long distances using the SDI 'loop-though' facility
which equalises and re-clocks the signal each time it is cascaded, whilst
simultaneously outputting the source signal via the HDMI output.
2. APPLICATIONS
Broadcast video signal to HDMI/SDI display
Broadcast video signal extension
3G SDI signal conversion into HDMI signal
3. PACKAGE CONTENTS
SDI to HDMI Scaler with Audio
5V/2.6A DC power adaptor
Operation Manual
4. SYSTEM REQUIREMENTS
Input source equipment such as SNG camera or any SDI signal with
connection cables and output to LCD TV or SDI monitor with connection
cables.
6
5. FEATURES
Supports SD-SDI, HD-SDI and 3G-SDI input signals with auto-detection
Supports HDMI and SDI (bypass) output simultaneously
SDI interface operates at bitrates of 2.970 Gbit/s, 2.970/1.001 Gbit/s,
1.485 Gbit/s, 1.485/1.001 Gbit/s and 270 Mb/s
Scale any SDI input signal to HDMI:
1. PC – SVGA@60 ~ WUXGA@60 (RB)
2. HDTV – 480p/576p ~ 1080p@50/60
Supports SDI input modes:
1. SD-SDI (SMPTE 259M-C, at bitrates of 270 Mbit/s)
2. HD-SDI (SMPTE 292M, at bitrates of 1.485 Gbit/s and
1.485/1.001 Gbit/s)
3. 3G-SDI (SMPTE 424M/425M-AB, at bitrates of 2.970 Gbit/s and
2.970/1.001 Gbit/s)
Equalised and re-clocked loop output
Alternative audio output to coaxial and analog 2 CH
Integrated audio de-embedder for up to 8 channels of 48 kHz audio
Supports SDI input/output distance up to 100 meters (3G-SDI), 200
meters (HD-SDI), or 300 meters (SD-SDI)
Note: Tested with Belden 1694A Cable. Operating distances may vary if used
with cables of different specifications.
7
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER
3G
HD
SD
MENU
ENTER
720p
PRO-3GSDIHDMI
1
2
3
4
5
6
-
+
XGA
7
1 Power LED: The LED will illuminate blue when the device is connected
to a power supply.
2 3G LED: This LED illuminate green when a 3G-SDI input signal is
detected.
3 HD LED: This LED illuminate green when a HD-SDI input signal is
detected.
4 SD LED: This LED illuminate green when a SD-SDI input signal is
detected.
5 MENU: Press this button to enter/exit the On-Screen Display (OSD)
menu.
6 ENTER: Press this button to confirm your selection. Press both ENTER
and 'Minus' (−) buttons together to switch the display output to 720p
or press both ENTER and 'Plus' (+) buttons together to switch to XGA.
After making the selection, press ENTER to confirm the output format.
7 −/+: Press these buttons to move up or down the OSD selections.
8
6.2 Rear Panel
SDI IN
AUDIO OUT
SDI OUT
COAXIAL
1
2
3
HDMI OUT
DC 5V
L
R
4
5
6
1 SDI IN: Connect to the SDI output of the SDI source device. Accepts
SD,HD or 3G SDI signals.
2 SDI OUT: Provides a 'loop-through' SDI signal output for connection
to a SDI display.
3 AUDIO OUT COAXIAL: Digital Audio output (SP/DIF). Connect to an
amplifier or recording device with a suitable digital coaxial input.
4 AUDIO OUT R/L: Analogue audio output (L/R Stereo). Connect to an
amplifier or recording device with a suitable analogue input.
5 HDMI Out:Connect a HDMI equipped display or to a DVI Display with
a HDMI to DVI cable.
6 DC 5V: Plug the 5 V DC power supply into the unit and connect the
adaptor to an AC outlet. The 'POWER' LED will illuminate blue when
the power is ON.
9
6.3 OSD Menu and Function List
1st Layer
2nd Layer
3rd Layer
NATIVE
800 x 600 @60
1024 x 768 @60
1280 x 768 @60
1360 x 768 @60
1280 x 800 @60
1280 x 1024 @60
1440 x 900 @60
1400 x 1050 @60
Output
1680 x 1050 @60
1600 x 1200 @60
1920 x 1200 @60
720 x 480p @60
Display
1280 x 720p @60
1920 x 1080p @60
720 x 576p @50
1280 x 720p @50
1920 x 1080p @50
1920 x 1080i @60
1920 x 1080i @50
Full
Over Scan
Size
Under 1
Under 2
Letter Box
Pan Scan
Exit
10
Color
Contrast
0~255 (105)
Brightness
0~192 (96)
R
0~255 (128)
G
0~255 (128)
B
0~255 (128)
R Offset
0~63 (32)
G Offset
0~63 (32)
B Offset
0~63 (32)
Exit
Group 1
Group 2
SDI Audio
Group 3
Group 4
Auto
Off
Factory Reset
Yes
Information
Input Timing, Output Timing & Version
11
6.3.1 Display
Output Timings: There are a total of 20 timings available for selection.
Size: Adjusts the displayed screen size from Full, Over Scan, Under Scan,
Letter box or Pan scan to fit the current display size or aspect ratio.
6.3.2 Colour
Adjusts the screen's RGB Color, Contrast and/or Brightness.
12
6.3.3 SDI Audio
Selects the SDI audio output from 4 different audio groups and each
group's 2CH contents or can be set to 'Auto' which contain up to 7.1
Channels of audio (dependent on the input source signal). If no audio
output is required, the audio can also be muted by selecting 'OFF'.
6.3.4 Factory Reset
Select YES to return the unit to the factory settings. The default Factory
Setting for Video display is 'Full Screen' (1280×720@60Hz), Color
setting's factory default rate is the same as shown on the OSD and SDI
audio is 'AUTO'.
13
6.3.5 Information
Displays the source input format, the output display format and the
unit's software version.
14
7. CONNECTION DIAGRAM
SDI Camera
SDI Display
SDI Input
SDI Output
SDI IN
AUDIO OUT
SDI OUT
COAXIAL
R
Power
Supply
HDMI OUT
DC 5V
L
HDMI
Output
Coaxial
Digital Audio
Output
Amplifier
Stereo
Audio
Output
HDTV/Monitor
15
8. SPECIFICATIONS
SMPTE Standard
425M Level A & B, 424M, 292M, 259M-C
SDI Transmission Rates
2.970 Gbps, 2.970/1.001 Gpbs
1.48 5 Gbps, 1.485/1.001Gbps and 270 Mbps
Video Bandwidth
165 MHz/link
Input
1×BNC (SD/HD/3G-SDI)
Output
1×BNC (SD/HD/3G-SDI), 1×HDMI, 1×Coaxial, 1×L/
R (RCA)
SDI Timing Support
SD-SDI:
SMPTE 259M-C, 270 Mbit/s
HD-SDI:
SMPTE 292M, 1.485 & 1.485/1.001 Gbit/s
3G-SDI:
SMPTE 424M/425M-AB, 2.970 &
2.970/1.001 Gbit/s
HDMI Timing Support
480i, 576i, 720p@50/59.94/60
1080i@50/59.94/60
1080p@23.98/24/25/29.97/30/50/59.94/60
Power Supply
5 V DC/ 2.6 A (US/EU standards, CE/FCC/UL certified)
ESD Protection
Human-body Model:
± 8kV (air-gap discharge)
± 4kV (contact discharge)
SDI Cable Distance
3G/HD/SD-SDI up to 100 /200/300 meters with
BELDEN 1694A Cable
Dimension
180 mm (W)×142 mm (D)×25 mm (H)
Weight
460 g
Chassis Material
Aluminum
Chassis Colour
Black
Operating Temperature
0 °C~40 °C/32 °F~104 °F
Storage Temperature
−20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity
20~90 % RH (Non-condensing)
Power Consumption
4 W
16
9. ACRONYMS
ACRONYM
COMPLETE TERM
3G
Bandwidth 2.97G bps ≈ 3G
SDI
Serial Digital Interface
HD
High Definition
17
CYP (UK) Ltd., Unit 7, Shepperton Business Park, Govett Avenue, Shepperton,
Middlesex, TW17 8BA
Tel: +44 (0) 20 3137 9180 | Fax: +44 (0) 20 3137 6279
Email: sales@cypeurope.com
www.cypeurope.com
VR4
Download PDF