TM-5-1730-245-24P

TM 5-1730-245-24P
TECHNICAL MANUAL
UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
REPAIR PARTS AND SPECIAL TOOLS LIST
POWER SUPPLY, HYDRAULIC
MODEL NUMBER 9305
NSN 1730-01-342-2184
EIC YX6
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
HEADQUARTERS, DEPARTMENT OF THE ARMY
31 MAY 1996
TM 5-1730-245-24P
TECHNICAL MANUAL
HEADQUARTERS
DEPARTMENT OF THE ARMY
WASHINGTON D.C., 31 May 1996
NO. 5-1730-245-24P
TECHNICAL MANUAL
Unit, Direct Support and General Support Maintenance
Repair Parts and Special Tools List
POWER SUPPLY, HYDRAULIC
MODEL NUMBER 9305
NSN 1730-01 -342-2184
EIC YX6
Current as of 15 September 1995
REPORTING ERRORS AND RECOMMENDING IMPROVEMENTS
You can help improve this manual. If you find any mistakes or if you know of a way to improve the
procedures, please let us know. Mail your letter, DA Form 2028 (Recommended Changes to Publications
and Blank Forms), or DA Form 2028-2 located in the back of this manual directly to: Commander, US
Army Aviation and Troop Command, ATTN: AMSAT-I-MP, 4300 Goodfellow Blvd., St. Louis, MO 631201798. You may also submit your recommended changes by E-mail directly to <daf2028@st-louisemh7.army.mil>. A reply will be furnished directly to you.
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
TABLE OF CONTENTS
Section I.
PAGE
INTRODUCTION .................................................................................................
1
Section II.
REPAIR PARTS LIST .
Group 01
Group 02
Group 03
Group 04
Instruments and Controls . ................................................................................
Cabinet Structure .............................................................................................
Hydraulic System .............................................................................................
Drive System ...................................................................................................
Section III.
SPECIAL TOOLS LIST (Not Applicable)
Section IV.
CROSS-REFERENCE INDEXES .......................................................................
National Stock Number Index ..............................................................................
Part Number Index ..............................................................................................
Figure and Item Number Index ............................................................................
i/(ii blank)
1-1
2-1
3-1
4-1
I-1
I-2
I-10
ILLUS/
FIGURE
1
2
3
4
TM 5-1730-245-24P
UNIT, DIRECT SUPPORT AND GENERAL SUPPORT
MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST
Section I. INTRODUCTION
1.
SCOPE. This R PSTL lists and authorizes spares and repair parts; special tools; special test, measurement, and
diagnostic equipment (TMDE); and other special support equipment required for performance of unit, direct support and
general support maintenance of the hydraulic power supply. It authorizes the requisitioning, issue, and disposition of
spares, repair parts and special tools as indicated by the source, maintenance and recoverability (SMR) codes.
2.
GENERAL. In addition to this section, Introduction, this Repair Parts and Special Tools List is divided into the
following sections:
a.
Section II. Repair Parts List. A list of spares and repair parts authorized by this RPSTL for use in the
performance of maintenance. This list also includes parts which must be removed for replacement of the authorized
parts. Parts lists are composed of functional groups in ascending alphanumeric sequence, with the parts in each group
listed in ascending figure and item number sequence. Bulk materials are listed in item name sequence. Items are shown
in the associated illustration(s)/figure(s).
b.
Section III. Special Tools List. A list of special tools, special TMDE, and other special support equipment
authorized by this RPSTL (as indicated by Basis of Issue (BOI) information in DESCRIPTION AND USABLE ON CODE
column) for the performance of maintenance.
c.
Section IV. Cross-Reference Index. A list, in National Item Identification Number (NIIN) sequence, of all
National stock numbered items appearing in the listing, followed by a list in alphanumeric sequence of all part numbers
appearing in the listings. National stock numbers and part numbers are cross referenced to each illustration figure and
item number appearance. The figure and item number index lists figure and item numbers in alphanumeric sequence
and cross references NSN, CAGEC and part number.
3.
EXPLANATION OF COLUMNS (SECTIONS II AND III).
a.
ITEM NO. (Column (1)). Indicates the number used to identify items called out in the illustration.
b.
SMR Code (Column (2)). The Source, Maintenance, and Recoverability (SMR) code is a 5-position code
containing supply/requisitioning information, maintenance category authorization criteria, and disposition instruction, as
shown in the following breakout:
Source
Code
XX
Maintenance
Code
Recoverability
Code
XX
XX
1st two
positions
How you get an
item.
3d position
4th position
Who can install,
replace or use
the item.
Who can do
complete repair
(see note) on
the item.
Who determines
disposition
action on an
unserviceable item.
* Complete Repair: Maintenance capacity, capability, and authority to perform all corrective maintenance tasks
of the "Repair" function in a use/user environment in order to restore serviceability to a failed item.
1
TM 5-1730-245-24P
(1)
Source Code. The source code tells you how to get an item needed for maintenance, repair, or overhaul
of an end item/equipment. Explanations of source codes follows:
Source
Code
PA
PB
PC**
PD
PE
PF
PG
KD
KF
KB
MO
MF
MH
ML
MD
AO
AF
AH
AL
AD
AD
XA
XB
XC
XD
Explanation
}
}
Stocked items; use the applicable NSN to request/requisition items with these source codes.
They are authorized to the category indicated by the code entered in the 3rd position of the
SMR code.
**NOTE: Items coded PC are subject to deterioration.
Items with these codes are not to be requested/requisitioned individually. They are part of a
kit which is authorized to the maintenance category indicated in the 3rd position of the SMR
code. The complete kit must be requisitioned and applied.
(Made at Unit/AVUM Level)
(Made at DS/AVIM Level)
(Made at GS Level)
(Made at Specialized Repair
Activity (SRA))
(Made at Depot)
(Assembled by Unit/AVUM
Level)
(Assembled by DS/AVIM
Level)
(Assembled by GS Category)
(Assembled by SRA)
(Assembled by Depot)
(Assembled by Depot)
}
}
Items with these codes are not to be requested/requisitioned individually.
They must be made from bulk material which is identified by the part
number in the DESCRIPTION and USABLE ON CODE (UOC) column
and listed in the Bulk Mate- rial group of the repair parts list in this
RPSTL. If the item is authorized to you by the 3rd position code of the
SMR code, but the source code indicates it is made at a higher level,
order the item from the higher level of maintenance.
Items with these codes are not to be requested/ requisitioned
individually. The parts that make up the assembled item must be
requisitioned or fabricated and assembled at the level of maintenance
indicated by the source code. If the3rd position code of the SMR code
authorizes you to replace the item, but the source code indicates the
items are assembled at a higher level, order the item from the higher
level of maintenance.
Do not requisition "XA"-coded item. Order its next higher assembly. (Refer to the NOTE below.)
If an "XB" item is not available from salvage, order it using the CAGEC and part number given.
Installation drawing, diagram, instruction sheet, field service drawing, that is identified manufacturer's part
number.
Item is not stocked. Order an "XD"-coded item through normal supply channels using the CAGEC and
part number given, if no NSN is available.
NOTE
Cannibalization or controlled exchange, when authorized, may be used as a source of
supply for items with the above source codes, except for those source coded "XA" or
those aircraft support items restricted by requirements of AR 750-1.
(2)
Maintenance Code. Maintenance codes tell you the level(s) of maintenance authorized to USE and
REPAIR support items. The maintenance codes are entered in the third and fourth positions of the SMR code as follows:
2
TM 5-1730-245-24P
(a) The maintenance code entered in the third position tells you the lowest maintenance level authorized to
remove, replace, and use an item. The maintenance code entered in the third position will indicate authorization to the
following levels of maintenance.
Maintenance
Code
C
O F
H
L
D
-
Application/Explanation
Crew or operator maintenance done within unit/AVUM maintenance.
Unit level/AVUM maintenance can remove, replace, and use the item.
Direct support/AVIM maintenance can remove, replace, and use the item.
General support maintenance can remove, replace, and use the item.
Specialized repair activity can remove, replace, and use the item.
Depot can remove, replace, and use the item.
(b) The maintenance code entered in the fourth position tells whether or not the item is to be repaired and
identifies the lowest maintenance level with the capability to do complete repair (i.e., perform all authorized repair
functions.)
NOTE
Some limited repair may be done on an item at a lower level of maintenance, if
authorized by the Maintenance Allocation Chart and SMR codes.
Maintenance
Code
O F
H
L
D
Z
B
-
Application/Explanation
Unit/AVUM is the lowest level that can do complete repair of the item.
Direct support/AVIM is the lowest level that can do complete repair of the item.
General Support is the lowest level that can do complete repair of the item.
Specialized repair activity is the lowest level that can do complete repair of the item.
Depot is the lowest level that can do complete repair of the item.
Nonreparable. No repair is authorized.
No repair is authorized. No parts or special tools are authorized for the maintenance of a
"B" coded item. However, the item may be reconditioned by adjusting, lubricating, etc., at
the user level.
(3)
Recoverability Code. Recoverability codes are assigned to items to indicate the disposition action on
unserviceable items. The recoverability code is entered in the fifth position of the SMR Code as follows:
Recoverability
Codes
Z
O
-
F
-
H
-
D
-
Application/Explanation
Nonreparable item. When unserviceable, condemn and dispose of the item at the level of
maintenance shown in 3d position of SMR Code.
Reparable item. When not economically reparable, condemn and dispose of the item at unit
or AVUM level.
Reparable item. When uneconomically reparable, condemn and dispose of the item at the
direct support or AVIM level.
Reparable item. When uneconomically reparable, condemn and dispose of the item at the
general support level.
Reparable item. When beyond lower level repair capability, return to depot. Condemnation
and disposal of item not authorized below depot level.
3
TM 5-1730-245-24P
Recoverability
Codes
L
A
-
Application/Explanation
Reparable item. Condemnation and disposal not authorized below specialized repair activity
(SRA).
Item requires special handling or condemnation procedures because of specific reasons
(e.g., precious metal content, high dollar value, critical material, or hazardous material).
Refer to appropriate manuals/directives for specific instructions.
c. CAGEC (Column (3)). The Commercial and Government Entity Code (CAGEC) is a 5-digit numeric code
which is used to identify the manufacturer, distributor, or Government agency/activity that supplies the item.
d. PART NUMBER (Column (4)). Indicates the primary number used by the manufacturer, (individual,
company, firm, corporation, or Government activity), which controls the design and characteristics of the item by means
of its engineering drawings, specifications, standards, and inspection requirements to identify an item or range of items.
NOTE
When you use an NSN to requisition an item, the item you receive may have a
different part number from the number listed.
e. DESCRIPTION AND USABLE ON CODE (UOC) (Column (5).
This column includes the following
information:
(1)
The Federal item name and, when required, a minimum description to identify the item.
(2)
Part numbers of bulk materials are referenced in this column in the line entry to be
manufactured/fabricated.
(3)
The statement "END OF FIGURE" appears just below the last item description in Column (5) for
a given figure in both Section II and Section III.
f. QTY (Column (6)). The QTY (quantity per figure) column indicates the quantity of the item used in the
breakout shown on the illustration/figure, which is prepared for a functional group, subfunctional group, or an assembly. A
"V" appearing in this column instead of a quantity indicates that the quantity is variable and may vary from application to
application.
4.
EXPLANATION OF INDEX FORMAT AND COLUMNS (SECTION IV).
a. NATIONAL STOCK NUMBER (NSN) INDEX.
(1)
STOCK NUMBER Column. This column lists the NSN in national item identification number
(NIIN) sequence. The NIIN consists of the last nine digits of the NSN, i.e.
NSN
5305-01-574-1467
NIIN
When using this column to locate an item, ignore the first four digits of the NSN. Use the complete NSN (13 digits) when
requisitioning items by stock number.
(2)
FIG. Column. This column lists the number of the figure where the item is identified/located. The
figures are in numerical order in Section II and Section III.
(3)
ITEM Column. The item number identifies the item associated with the figure listed in the
adjacent FIG. column. This item is also identified by the NSN listed on the same line.
b. PART NUMBER INDEX. Part numbers in this index are listed by part number in ascending alphanumeric
sequence (i e., vertical arrangement of letter and number combination which places the first letter or digit of each group
in order A through Z, followed by the numbers 0 through 9, and each following letter or digit in like order).
4
TM 5-1730-245-24P
(1) CAGEC Column. The Commercial and Government Entity Code (CAGEC) is a 5-digit numeric code
used to identify the manufacturer, distributor, or Government agency/activity that supplies the item.
(2) PART NUMBER Column. Indicates the primary number used by the manufacturer (individual, firm,
corporation, or Government activity), which controls the design and characteristics of the item by means of its
engineering drawings, specifications, standards, and inspection requirements to identify an item or range of items.
(3) STOCK NUMBER Column. This column lists the NSN for the associated part number and manufacturer
identified in the PART NUMBER and CAGEC columns to the left.
(4) FIG. Column. This column lists the number of the figure where the item is identified/located in Section II
and Section III.
(5) ITEM Column. The item number is that number assigned to the item as it appears in the figure
referenced in adjacent figure number column.
c.
FIGURE AND ITEM NUMBER INDEX.
(1) FIG. Column. This column lists the number of the figure where the item is identified/located in Section II
and Section III.
(2) ITEM Column. The item number is that number assigned to the item as it appears in the figure
referenced in the adjacent figure number column.
(3) STOCK NUMBER Column. This column lists the NSN for the item.
(4) CAGEC Column. The Commercial and Government Entity Code (CAGEC) is a 5-digit numeric code
used to identify the manufacturer, distributor, or Government agency/activity that supplies the item.
(5) PART NUMBER Column. Indicates the primary number used by the manufacturer (individual, firm,
corporation, or Government activity), which controls the design and characteristics of the item by means of its
engineering drawings, specifications, standards, and inspection requirements to identify an item or range of items.
5.
SPECIAL INFORMATION.
a. USABLE ON CODE. The usable on code appears in the lower left corner of the Description Column heading.
Usable on codes are shown as "UOC" in the Description Column (justified left) on the last line of the applicable item
description/nomenclature. Uncoded items are applicable to all models. Identification of the usable on codes used in this
RPSTL are:
Code
A
B
C
D
Used On
Model
Model
Model
Model
b.
FABRICATION INSTRUCTIONS. Bulk materials required to manufacture items are listed in the Bulk
Material Functional Group of this RPSTL. Part numbers for bulk materials are also referenced in the description column
of the line entry for the item to be manufactured/fabricated. Detailed fabrication instructions for items source coded to be
manufactured or fabricated are found in TM 5-1730-245-14.
c.
INDEX NUMBERS. Items which have the word BULK in the figure column will have an index number
shown in the item number column. This index number is a cross-reference between the National Stock Number/Part
Number Index and the bulk material list in Section II.
d.
ASSOCIATED PUBLICATIONS. The publications listed below pertain to the hydraulic power supply and
its components.
5
TM 5-1730-245-24P
Publication
TM 5-1730-245-14
6.
Short Title
Operator, Unit, Direct Support and General Support Maintenance Manual.
HOW TO LOCATE REPAIR PARTS.
a. When National Stock Numbers or Part Numbers are NOT Known.
(1) First. Using the table of contents, determine the assembly or subassembly group to which the item
belongs. This is necessary since figures are prepared for assembly groups and subassembly groups, and listings are
divided into the same groups.
(2) Second. Find the figure covering the assembly group or subassembly group to which the item belongs.
(3) Third. Identify the item on the figure and use the Figure and Item Number Index to find the NSN.
b. When National Stock Number or Part Number is Known.
(1) First. Using the of National Stock Number and Part Number Indexes find the pertinent National Stock
Number or Part Number. The NSN index is in National Item Identification Number (NIIN) sequence (see paragraph 4.a.).
The part numbers in the Part Number index are listed in ascending alphanumeric sequence (see paragraph 4.b.). Both
indexes cross-reference you to the illustration/figure and item number of the item you are looking for.
(2) Second. Turn to the figure and item number, verify that the item is the one you are looking for, then
locate the item number in the repair parts list for the figure.
7.
ABBREVIATIONS. Abbreviations used in this manual are listed in MIL-STD-12.
6
Figure 1. Instruments and Controls
TM 5-1730-245-24P
TM 5-1730-245-24P
SECTION II
(1)
ITEM
NO.
(2)
SMR
CODE
(3)
(4)
NSN
CAGEC
(5)
PART
NUMBER
(6)
DESCRIPTION AND USABLE ON CODES(UOC)
(7)
QTY
GROUP 01 INSTRUMENTS AND CONTROLS
FIG. 1 INSTRUMENTS AND CONTROLS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
PAFZZ
XBFZZ
PAFZZ
PAFZZ
PAFZZ
PAFZZ
PAFZZ
PAFZZ
XBFZZ
PAFZZ
XBFZZ
PAFZZ
PAFZZ
PAFZZ
PAFZZ
PAFZZ
XBFZZ
PAFZZ
XBFZZ
PAFZZ
XBFZZ
PAFZZ
XBFZZ
PAFZZ
XBFZZ
PAFZZ
PAFZZ
PAFZZ
XBFZZ
PAFZZ
XBFZZ
PAFZZ
XBFZZ
PAFZZ
PAFZZ
PAFZZ
PAFZZ
PAFZZ
XBFZZ
PAFZZ
PAFZZ
XBFZZ
PAFZZ
XBFZZ
XBFZZ
PAFZZ
XBFZZ
PAFZZ
5930002218992
5310009349757
5310000453296
5310009349762
5310002618278
5310009349762
5310002618278
5310009349762
5310002618278
5310009349757
5310000453296
5310008392066
5920000117142
5310009349739
5310005432410
5305008892999
5310009349762
5310002618278
13445
13445
13445
13445
13445
13445
13445
13445
13445
04198
96906
96906
04198
09527
96906
96906
96906
09527
09527
09527
96906
96906
96906
09527
09527
09527
96906
96906
96906
09527
09527
04198
96906
96906
04198
29516
96906
29516
75915
81349
62389
96906
96906
96906
96906
09527
96906
96906
9095
8307
8304
9115
8507
8304
95509
83355
85753
20W1001TH01B
MS35649-282
MS35338-43
101101A167-07
GPO634
MS35649-286
MS35338-100
MS15759-946
GY0094F
BL0037
GPO803
MS35649-286
MS35338-100
MS15759-946
GY0099F
BL0037
GP0709
MS35649-286
MS35338-100
MS15759-946
GY0099F
BL0037
20W1001TH01B
MS35649-282
MS35338-43
101A167-07
9305-210
MS35691-45
9305-220
342048
F02A125V100A
46202LR
MS35649-242
MS35338-40
MS51412-19
MS35206-217
AP0532
MS35649-286
MS35338-100
1-1
SWITCH,PUSH..................................................
NUT,PAL ............................ ..............................
NUT,FACE ........................................................
SWITCH,STOP .................................................
NUT,PAL ..........................................................
NUT,FACE ........................................................
SWITCH,IGNITION ...........................................
KEY,IGNITION SWITCH ...................................
NUT,HEX ..........................................................
GAUGE,PRESSURE .........................................
NUT,PLAIN,HEXAGON .....................................
WASHER,LOCK .. .............................................
CLAMP,GAUGE ................................................
GAUGE,ENGINE TEMP .................................... .
NUT,PLAIN,HEXAGON ..................................... .
WASHER,LOCK ............................ ...................
WASHER,FLAT ....................... ......................
RESISTOR ASSEMBLY ....................................
RETAINER,GAUGE ..........................................
GAUGE,OIL PRESSURE ..................................
NUT,PLAIN,HEXAGON .....................................
WASHER,LOCK ...............................................
WASHER,FLAT .................. ..............................
RESISTOR ASSEMBLY .............. ......................
RETAINER,GAUGE ...................... ....................
GAUGE,FUEL LEVEL .......................................
NUT,PLAIN,HEXAGON .....................................
WASHER,LOCK ...............................................
WASHER,FLAT ................................................
RESISTOR ASSEMBLY ....................................
RETAINER,GAUGE ..........................................
GAUGE,PRESSURE .......................................
NUT,PLAIN,HEXAGON .....................................
WASHER,LOCK ...............................................
CLAMP,GAUGE ................................................
CABLE ASSY,THROTTLE ................................
NUT,PLAIN,HEXAGON .....................................
NUT,HEX,CONDUIT .........................................
FUSEHOLDER ASSEMBLY ...............................
FUSE,CARTRIDGE ...........................................
SWITCH,LIGHT ................................................
NUT,PLAIN,HEXAGON .....................................
WASHER,LOCK ...............................................
WASHER,FLAT ................................................
SCREW,MACHINE ...........................................
AMMETER ........................................................
NUT,PLAIN,HEXAGON .....................................
WASHER,LOCK ...............................................
1
1
2
1
1
2
1
1
1
2
4
6
2
1
25
25
25
1
4
1
25
25
25
2
4
1
25
25
25
2
4
2
4
6
2
1
2
2
1
1
1
2
2
2
2
1
25
25
SECTION II
(1)
ITEM
NO.
49
50
51
52
53
54
55
56
57
(2)
SMR
CODE
XBFZZ
XBFZZ
PAFZZ
XBFZZ
PAFZZ
XBFZZ
PAFZZ
PAFZZ
XBFZZ
TM-5-1730-245-24P
(3)
(4)
NSN
CAGEC
5310009349751
5310000453296
96906
09527
09527
96906
96906
75915
13445
OPCZO
96906
(5)
PART
NUMBER
MS15759-946
BL0037
MH0042
MS35650-302
MS35338-43
HW0126
2609SC
1251
MS51850-44
(6)
DESCRIPTION AND USABLE ON CODES(UOC)
WASHER,FLAT .................................................
RETAINER,GAUGE ...........................................
HOURMETER....................................................
NUT,PLAIN,HEXAGON......................................
WASHER,LOCK ................................................
RETAINER,GAUGE ...........................................
SOCKET,LAMP .................................................
LAMP.................................................................
SCREW .............................................................
END OF FIGURE
1-2
(7)
QTY
25
4
1
2
4
1
1
1
1
TM 5-1730-245-24P
Figure 2. Cabinet assembly.
SECTION II
(1)
ITEM
NO.
(2)
SMR
CODE
TM-5-1730-245-24P
(3)
(4)
NSN
CAGEC
(5)
PART
NUMBER
(6)
DESCRIPTION AND USABLE ON CODES(UOC)
(7)
QTY
GROUP 02 CABINET STRUCTURE
FIG. 2 CABINET ASSEMBLY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
XBFZZ
XBFZZ
XBFZZ
XBFZZ
XBFZZ
XBFZZ
PAFZZ
XBFZZ
XBFZZ
XBFZZ
XBFZZ
XBFZZ
XBFZZ
PAFZZ
PAFZZ
PAFZZ
XBFZZ
XBFZZ
PAFZZ
XBFZZ
XBFZZ
XBFZZ
PAFZZ
XBFZZ
XBFZZ
PAFZZ
XBFZZ
XBFZZ
PAFZZ
XBFZZ
XBFZZ
XBFZZ
PAFZZ
XBFZZ
PAFZZ
PAFZZ
PAFZZ
XBFZZ
XBFZZ
PAFZZ
XBFZZ
PAFZZ
XBFZZ
XBFZZ
XBFZZ
XBFZZ
XBFZZ
XBFZZ
5310004079566
5310008299981
5320003435435
5305000680502
5310005825965
5310009971888
5320003435435
5320003435435
5320003435435
5305009897434
5310000453296
5310009349751
5325009983351
29516
29516
29516
29516
29516
96906
96906
96906
29516
96906
29516
96906
29516
07707
29516
29516
29516
96906
96906
96906
60012
60012
07707
60012
60012
07707
60012
29516
07707
29516
29516
96906
96906
96906
94222
94222
96906
29516
96906
29516
96906
29516
29516
29516
96906
29516
29516
96906
9305-106
9305-121
9305-122
9305-123
9305-124
MS90725-32
MS35338-45
MS35649-2312
9305-127
MS51840-44
9305-128
MS51840-44
9305-129
AD43AH
9305-131
9305-130
9305-126
MS90725-6
MS35338-44
MS35649-2252
CD-109
ND-1252
AD43AH
CD-109
ND-1252
AD43AH
CD-109
9305-139
AD43AH
9305-132
9305-133
MS35207-263
MS35338-43
MS35650-302
85-15-160-16
85-47-101-15
85-24-201-20
9305-134
MS51850-44
9305-105
MS51840-44
9305-111
9305-125
9305-135
MS51840-44
9305-222
9305-114
MS51850-44
2-1
HOUSING,MAIN ................................................
PLATE,BACKING...............................................
PLATE,BACKING...............................................
PLATE,BACKING...............................................
PLATE,BACKING...............................................
BOLT,HEX.........................................................
WASHER,LOCK . ..............................................
NUT,PLAIN,HEXAGON......................................
SHROUD,LOWER ................................ .............
SCREW................................ .............................
SHROUD,UPPER ................................ ..............
SCREW ................................. ...........................
DRIPEDGE................................ ........................
RIVET,BLIND................................ .....................
RETAINER,D-RING ................................ ...........
D-RING................................ ..............................
PLATE,BACKING ................................ .............
SCREW,CAP,HEXAGON H ...............................
WASHER LOCK ................................ ................
NUT,PLAIN,HEXAGON................................ ......
CAP................................ ................................ ...
FLANGE HYDRAULIC ................................ .......
RIVET BLIND................................ .....................
CAP................................ ................................ ...
FLANGE,HYDRAULIC ................................ .......
RIVET,BLIND................................ .....................
CAP................................ ................................ ...
FLANGE,ACCESS................................ .............
RIVET,BLIND................................ .....................
PANEL,SIDE................................ ......................
HANDLE,PANEL................................ ................
SCREW,MACHINE ................................ ............
WASHER,LOCK ................................ ................
NUT,PLAIN,HEXAGON................................ ......
FASTENER................................ ........................
RECEPTACLE,TURNLOCK ...............................
RECEPTACLE................................ ...................
PANEL,REAR ................................ ....................
SCREW ................................ ............................
PANEL,INSTRUMENT ................................ .......
SCREW................................ .............................
SUPPORT,INSTRUMENT................................ ..
PLATE,BACKING ..............................................
COVER,TOP .....................................................
SCREW ............................... .............................
CAP,RAIN ............................ .............................
SHIELD,RAIN ................................ ...................
SCREW ............................... .............................
1
2
2
2
3
29
25
25
1
31
1
31
24
8
8
4
32
3
32
3
1
24
3
1
24
3
1
24
2
3
6
6
6
6
6
6
1
34
1
31
1
1
1
31
1
1
34
SECTION II
(1)
ITEM
NO.
49
50
51
52
53
54
55
56
57
58
(2)
SMR
CODE
XBFZZ
XBFZZ
XBFZZ
PAFZZ
XBFZZ
PAFZZ
XBFZZ
PAFZZ
PAFZZ
XBFZZ
TM-5-1730-245-24P
(3)
(4)
NSN
CAGEC
5305009897434
5310000453296
5310009349751
5325009983351
29516
96906
29516
29516
96906
96906
96906
94222
94222
29516
(5)
PART
NUMBER
9305-115
MS51850-44
9305-136
9305-133
MS35207-263
MS35338-43
MS35650-302
85-15-160-16
85-47-101-15
9305-101
(6)
DESCRIPTION AND USABLE ON CODES(UOC)
QTY
FLANGE,RAIN SHIELD ..................................... ....... 1
SCREW ............................. ............................... ..
34
PANEL,FRONT................................ ..................
1
HANDLE,PANEL................................ ................
3
SCREW,MACHINE ................................ ............
6
WASHER,LOCK ................................ ................
6
NUT,PLAIN,HEXAGON................................ ......
6
FASTENER................................ ........................
6
RECEPTACLE,TURNLOCK ...............................
6
BASE ASSEMBLY ................................ .............
1
END OF FIGURE
2-2
(7)
Figure 3. Hydraulic Systems.
TM 5-1730-245-24P
SECTION II
(1)
ITEM
NO.
(2)
SMR
CODE
TM-5-1730-245-24P
(3)
(4)
NSN
CAGEC
(5)
PART
NUMBER
(6)
DESCRIPTION AND USABLE ON CODES(UOC)
(7)
QTY
GROUP 03 HYDRAULIC SYSTEM
FIG. 3 HYDRAULIC SYSTEM
1
2
3
4
5
6
7
8
9
10
10
11
12
13
14
15
16
17
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
XBFZZ
XBFZZ
PAFZZ
XBFZZ
PAFZZ
XBFZZ
XBFZZ
XBFZZ
XBFZZ
PAFZZ
PAFZZ
PAFZZ
XBFZZ
XBFZZ
XBFZZ
PAFZZ
XBFZZ
XBFZZ
XBFZZ
XBFZZ
PAFZZ
XBFZZ
PAFZZ
XBFZZ
PAFZZ
PAFZZ
PAFZZ
PAFZZ
XBFZZ
XBFZZ
XBFZZ
XBFZZ
XBFZZ
XBFZZ
XBFZZ
XBFZZ
XBFZZ
XBFZZ
PAFZZ
XBFZZ
XBFZZ
XBFZZ
PAFZZ
XBFZZ
XBFZZ
XBFZZ
XBFZZ
XBFZZ
PAFZZ
XBFZZ
5305000680502
5310005825965
5310013330060
5310009971888
5310004079566
5305009953441
5310000453296
5310009349751
5305009897434
5310000453296
5310009349751
5305009953441
5310000453296
5310009349751
29516
96906
96906
96906
96906
29516
96906
OJVY1
96906
OJVY1
OJVY1
OJVY1
29516
29516
I9008
D8286
D8286
97947
9794i7
D8286
OJVY1
96906
96906
96906
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
96906
96906
96906
29516
96906
96906
96906
29516
29516
29516
96906
96906
96906
9305-113
MS90725-6
MS35338-44
MS51412-23
MS35649-2252
9305-113-3
MS51850-44
FBB-080-40
MS51850-44
FB-G
FB-G
FB-08OBN
9305-137
9305-219
M10O-4017X30-CL8.
M10-127A-Z
M10-125A-Z
750-12380
750-12380
M10-912X30-CL8.8
DH2ULVJN
MS90725-32
MS35338-45
MS51575-25
9305-217
9305-407
9305-408
9305-409
9305-410
9305-411
9305-412
9305-413
9305-414
9305-415
9305-416
9305-417
9305-119-2
MS35207-269
MS35338-43
MS35650-302
9305-119-1
MS35207-263
MS35338-43
MS35650-302
9305-418
9305-419
9305-120-2
MS35207-269
MS35338-43
MS35650-302
3-1
RESERVOIR,HYDRAULIC................................ .
SCREW,CAP,HEXAGON H ................. .............
WASHER,LOCK ................................ ................
WASHER,FLAT ................................ .................
NUT,PLAIN,HEXAGON................................ ......
COVER,HYDRAULIC OIL ................................ ..
SCREW................................ .............................
FILLER BREATHER ASS................................ ...
SCREW................................ .............................
GASKET ................................. ..........................
GASKET................................ ............................
STRAINER................................ .........................
DIPSTICK ................................. ........................
PUMP,HYDRAULIC ................... ....................... ...
BOLT, HEX HEAD ................... ......................... ..
WASHER,LOCK......................... .......................
WASHER,FLAT ......................... .......................
COU P L I N G................................ ...................
COUPLING .............................. .........................
BOLT,SOCKET HEAD .................... ..................
HOUSING,OIL FILTER ................................ ......
BOLT,HEX................................ .........................
WASHER,LOCK ................................ ................
WASHER,FLAT ................................ .................
FILTER ELEMENT,OIL ................................ ......
HOSE ASSEMBLY .................. .........................
HOSE ASSEMBLY.............................................
HOSE ASSEMBLY................................ .............
TUBE ASSEMBLY ................................ .............
TUBE ASSEMBLY ................................ .............
TUBE ASSEMBLY ................................ .............
TUBE ASSEMBLY ................................ .............
TUBE ASSEMBLY. ................................ ............
TUBE ASSEMBLY ................................ .............
TUBE ASSEMBLY ................................ .............
TUBE ASSEMBLY ................................ .............
CLAMP ................................ ..............................
SCREW,MACINE................................ ...............
WASHERLOCK. ................................ ................
NUTPLAINHEXAGON................................ ........
BRACKET................................ ..........................
SCREW MACHINE ................................ ............
WASHERLOCK. ................................ ................
NUT,PLAIN,HEXAGON................................ ......
TUBE ASSEMBLY ................................ .............
TUBE ASSEMBLY . ................................ ...........
CLAMP ................................ ..............................
SCREW,MACHINE ................................ ............
WASHER,LOCK ................................ ................
NUT,PLAIN,HEXAGON......................................
1
10
34
12
7
1
20
1
20
2
2
1
1
1
2
3
2
1
1
1
1
29
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
2
5
5
1
3
5
5
1
1
1
2
3
5
SECTION II
(1)
ITEM
NO.
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
(2)
SMR
CODE
XBFZZ
XBFZZ
PAFZZ
XBFZZ
XBFZZ
XBFZZ
XBFZZ
PCFZZ
PAFZZ
XBFZZ
XBFZZ
PAFZZ
PAFZZ
XBFZZ
PCFZZ
XBFZZ
XBFZZ
PCFZZ
XBFZZ
XBFZZ
XBFZZ
XBFZZ
PAFZZ
XBFZZ
PAFZZ
XBFZZ
PAFZZ
XBFZZ
PAFZZ
XBFZZ
XBFZZ
PAFZZ
XBFZZ
XBFZZ
PAFZZ
XBFZZ
XBFZZ
PAFZZ
XBFZZ
XBFZZ
PAFZZ
PAFZZ
PAFZZ
PAFZZ
XBFZZ
XBFZZ
XBFZZ
XBFZZ
PAFZZ
XBFZZ
PAFZZ
XBFZZ
TM-5-1730-245-24P
(3)
(4)
NSN
CAGEC
5305009897434
5310000453296
5310009349751
5330005822577
5330002859842
5310010560177
4730010938464
5305000680500
5310005825965
5305000680500
5310005825965
5305000680500
5310005825965
5310013330060
5305000680500
5310005825965
5305000680500
5305000680502
5310005825965
5310009971888
29516
96906
96906
96906
96906
93061
96906
96906
96906
29516
93061
73752
29516
96906
96906
29516
96906
96906
96906
96906
96906
29516
96906
29516
96906
29516
29516
29516
29516
29516
96906
96906
29516
96906
96906
29516
96906
96906
96906
29516
96906
96906
29516
29516
29516
29516
96906
96906
96906
96906
29516
96906
(5)
PART
NUMBER
9305-120-1
MS35207-263
MS35338-43
MS35650-302
MS51512-B12
AN912-13
MS51525-B20
MS28778-20
MS51860-11
9305-424
MS51953C-73
2525
9305-425
MS51525-BI2
MS9020-12
9305-201-3
MS51525-B10
MS28778-10
MS51527-B10
MS51529-B10
MS51529-BI12
9305-208
MS51860-57
9305-209
MS51860-58
9305-206
9305-206-1
9305-205
9305-205-1
9305-204
MS90725-3
MS35338-44
9305-203
MS90725-3
MS35338-44
9305-420
MS90725-3
MS35338-44
MS51412-23
9305-221
MS90725-3
MS35338-44
9305-422
9305-423
9305-201-1
9305-109
MS90725-3
MS90725-6
MS35338-44
MS35649-2252
9305-201-2
MS90725-16
3-2
(6)
DESCRIPTION AND USABLE ON CODES(UOC)
BRACKET ............................. ............................
SCREW,MACHINE ........................ ...................
WASHER,LOCK ......................... ......................
NUT,PLAIN,HEXAGON ................... ..................
TEE ................................. ................................ .
BUSHING,STEEL,GALV .................. .................
ADAPTER,STRAIGHT ................... ...................
PACKING,PREFORMED ...................................
LOCKNUT,BULKHEAD ................... ..................
VALVE ............................. ................................ .
NIPPLE,STEEL ........................ .........................
SWITCH,TEMPERATURE .................. ..............
VALVE,SAMPLING ...................... .....................
ADAPTER,STRAIGHT .................... ..................
PACKING,PREF ORMED ..................................
ADAPTER,SPECIAL ..................... ....................
ADAPTER,STRAIGHT ................... ...................
PACKING,PREFORMED ...................................
ADAPTER,ELBOW ....................... ....................
ADAPTER,TEE ......................... ........................
ADAPTER,TEE ......................... ........................
ADAPTER,STRAIGHT .................... ..................
NUT,PLAIN,HEXAGON ................... ..................
ADAPTER,STRAIGHT ..................... .................
LOCKNUT,TUBE FITTIN ...................................
QUICK DISCONNECT .................... ..................
DUST CAP PQUICK ...................... ...................
QUICK DISCONNECT .................... ..................
DUST CAP,QUICK ............................................
MANIFOLD BLOCK ...................... ....................
SCREW,CAP,HEXAGON H .................. ............
WASHER,LOCK ......................... ......................
MANIFOLD BLOCK ....................... ...................
SCREW,CAP,HEXAGON H ................. .............
WASHER,LOCK ....................... ........................
OIL COOLER .......................... ..........................
SCREW,CAP,HEXAGON H ................. .............
WASHER,LOCK ......................... ......................
WASHER,FLAT ......................... .......................
MANIFOLD BLOCK ...................... ....................
SCREW,CAP,HEXAGON H ................... ...........
WASHER,LOCK ......................... ......................
VALVE,TWO WAY ............................................
VALVE,TWO WAY ............................................
MANIFOLD BLOCK ...................... ....................
BRACKET,MOUNTING ..................... ................
SCREW,CAP,HEXAGON H ...............................
SCREW,CAP,HEXAGON H ...............................
WASHER,LOCK ................................ ................
NUT,PLAIN,HEXAGON ................................. ....
MODULE,THERMAL................................ ..........
BOLT,HEX................................ .........................
(7)
QTY
1
3
5
5
1
1
1
1
1
1
1
1
1
7
12
1
3
14
2
2
1
2
2
1
1
3
3
3
3
1
20
34
1
20
34
1
20
34
12
1
20
34
2
1
1
1
20
10
34
7
1
4
SECTION II
(1)
ITEM
NO.
101
102
103
104
105
106
107
108
109
110
111
112
113
(2)
SMR
CODE
PAFZZ
PAFZZ
PAFZZ
XBFZZ
PAFZZ
PCFZZ
PCFZZ
PAFZZ
PCFZZ
PAFZZ
PAFZZ
PAFZZ
PAFZZ
TM-5-1730-245-24P
(3)
(4)
NSN
CAGEC
5310005825965
96906
29516
29516
29516
29516
96906
96906
29516
96906
96906
29516
29516
96906
(5)
PART
NUMBER
MS35338-44
9305-207
9305-201-4
9305-201-6
9305-202
MS28778-08
MS28775-012
9305-223
MS28778-04
MS51527-B04
9305-431
9305-432
MS51525-B04
(6)
DESCRIPTION AND USABLE ON CODES(UOC)
WASHER,LOCK ................................ ................
VALVE,THERMAL................................ ..............
BUTTO N,SPRING................................ .............
SPRING................................ .............................
RELIEF VALVE ASSY................................ ........
PACKINGTPREFORMED ................................ ..
PACKING,PREFORMED................................ ....
ADAPTER,SPECIAL ................................ ..........
PREFORMED PACKING................................ ....
ADAPTER,ELBOW................................ ............
TUBE ASSEMBLY ................................ .............
TUBE ASSEMBLY ................................ .............
ADAPTER,STRAIGHT ................................ .......
END OF FIGURE
3-3
(7)
QTY
34
1
1
1
2
2
2
1
1
1
1
1
1
TM 5-1730-245-24P
Figure 4. Drive System.
SECTION II
(1)
ITEM
NO.
(2)
SMR
CODE
TM-5-1730-245-24P
(3)
(4)
NSN
CAGEC
(5)
PART
NUMBER
(6)
DESCRIPTION AND USABLE ON CODES(UOC)
(7)
QTY
GROUP 04 DRIVE SYSTEM
FIG. 4 DRIVE SYSTEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
XBFZZ
XBFZZ
PAFZZ
XBFZZ
PAFZZ
PAFZZ
XBFZZ
XBFZZ
PAFZZ
XBFZZ
XBFZZ
XBFZZ
XBFZZ
PAFZZ
PAFZZ
XBFZZ
PAFZZ
XBFZZ
PAFZZ
XBFZZ
PAFZZ
PCFZZ
PAFZZ
XBFZZ
PAFZZ
PAFZZ
XBFZZ
XBFZZ
PAFZZ
XBFZZ
PAFZZ
XBFZZ
PAFZZ
XBFZZ
XBFZZ
XBFZZ
PAFZZ
XBFZZ
XBFZZ
PAFZZ
PAFZZ
PAFZZ
PAFZZ
PAFZZ
PAFZZ
PAFZZ
PAFFF
XBFZZ
4720014114003
5305000680502
5310005825965
5310013330060
5305000680502
5310004838792
5305000680502
5310005825965
5305000680502
5310005825965
5310013330060
29516
93061
29516
06915
29516
97947
93061
96906
96906
96906
96906
29516
96906
29516
09527
96906
29516
06915
29516
06915
'29516
96906
29516
96906
96906
29516
96906
96906
96906
29516
29516
06915
29516
06915
96906
96906
96906
96906
OE328
29516
29516
29516
29516
97947
97947
97947
97947
29516
9305-117
1/4HP-S
9305-426
HSS-08
125HBL-4-4
000-06477
30128-2L-2B
MS90725-6
MS35338-44
MS51412-23
MS35649-22
9305-117-3
MS51840-44
9305-214
LS6022
MS51840-44
9305-218
HSS-36
9305-428
HSS-36
9305-215
MIL-B-111881/2
9305-139
MS90725-6
MS17829-4C
9305-116
MS90725-6
MS35649-22
MS35338-44
9305-421
9305-401
HSS-20
9305-402
HSS-20
MS90725-6
MS35649-22
MS35338-44
MS51412-23
5324K13
9305-427
9305-429
9305-430
9305-421-1
751-41191
751-40520
000-07272
LPW4-01
9305-112
4-1
RESERVOIR,FUEL................................ ............
PLUG ................................ ................................
HOSE,FUEL SUPPLY................................ ........
CLAMP,HOSE ................................ ...................
FITTING,BRASS . . ..................... ......................
HOSE,NONMETALLIC.......................................
FITTING,BRASS ....................... ........................
SCREW,CAP,HEXAGON H ...............................
WASHER,LOCK ................................ ................
WASHER,FLAT ................................ .................
NUT,HEX................................ ...........................
COVER,FUEL................................ ....................
SCREW................................ .............................
CAP,FUEL ................................ .........................
SENDER,FUEL LEVEL ................................ ......
SCREW................................ .............................
FILTER,AIR. ................................ ......................
CLAMP ................................ ..............................
HOSE,AIR INTAKE................................ ............
CLAMP . ................................ ............................
FILTER,OIL ................................ .......................
BATTERY................................ ..........................
FLANGE,ACCESS................................ .............
SCREW,CAP,HEXAGON H ................. .............
NUT,SELF-LOCKING,HE . ................ ................
CONTAINER,BATTERY
................... ..........
SCREW,CAP,HEXAGON H ................. .............
NUT,HEX................................. ..........................
WASHER,LOCK . ................................ ..............
RADIATOR,ENGINE ................................ .........
HOSE,RADIATOR,UPPER................................ .
CLAMP,HOSE ................................ ...................
HOSE,RADIATOR,LOWER................................
CLAMP,HOSE ................................ ...................
SCREW,CAP,HEXAGON H ................. .............
NUT,HEX ............................. .............................
WASHER,LOCK .......................... .....................
WASHER,FLAT ..
....................... ................
CLAMP,HOSE ................................ ...................
TUBE,RADIATOR,DRAIN ................................ ..
VALVE,DRAIN . ................................ .................
TUBE,RADIATOR OVERF................................ .
CAP,RADIATOR ................................ ................
FAN ................................ ................................ ...
NUT,LEFT HAND................................ ...............
BELT,FAN ................................ .........................
ENGINE BLOCK ASSY................................ ......
PLATE,SHIPPING................................ ..............
1
1
1
2
1
1
1
16
14
14
12
1
17
1
1
17
1
3
1
3
1
1
1
16
2
1
16
12
14
1
1
4
1
4
16
12
14
14
1
1
1
1
1
1
1
1
1
1
SECTION II
(1)
ITEM
NO.
(2)
SMR
CODE
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
XBFZZ
PAFZZ
XBFZZ
XBFZZ
PAFZZ
XBFZZ
XBFZZ
XBFZZ
PAFZZ
XBFZZ
XBFZZ
XBFZZ
XBFZZ
PAFZZ
XBFZZ
PAFZZ
XBFZZ
XBFZZ
PAFZZ
PAFZZ
XBFZZ
XBFZZ
XBFZZ
XBFZZ
XBFZZ
PAFZZ
PAFZZ
PAFZZ
PAFZZ
PAFZZ
PAFZZ
PAFZZ
PAFZZ
XBFZZ
PAFZZ
PAFZZ
PAFZZ
XBFZZ
XBFZZ
XBFZZ
KFFZZ
KFFZZ
KFFZZ
PAFZZ
PAFZZ
KFFZZ
KFFZZ
96
97
TM-5-1730-245-24P
(3)
(4)
NSN
CAGEC
(5)
PART
NUMBER
I9008
D8286
96906
96906
96906
29516
96906
96906
96906
29516
96906
96906
29516
29516
96906
29516
96906
96906
96906
97947
19008
D8286
I9008
97947
I9008
97947
97947
97947
97947
97947
29516
09527
97947
I9008
D8286
97947
97947
97947
97947
97947
97947
97947
97947
29516
97947
97947
97947
M10.4017X20-CL8.
M1O-127A-Z
MS90725-32
MS35649-2312
MS35338-45
9305-211
MS90725-68
MS35649-2382
MS35338-46
9305-118
MS90725-72
MS51412-25
9305-213
9305-138
MS17829-6C
9305-212
MS90725-36
MS35649-2312
MS35338-45
750-40621
M8-4014X75-CL8.8
M8-125A-Z
M8-4014X45-CL8.8
000-07271
M8-4032-CL8-Z
751-40211
751-40203
751-40450
601-20691
751-40441
9305-307
GP0634
751-40111
M8-4014X60-CL8.8
M8-125A-Z
751-40280
751-40981
751-41201
751-11722
751-11460
750-11330-1
750-11330-2
750-11330-3
9305-216
000-07115
754-17680
757-16370
KFFZZ
97947
785352
KFFZZ
97947
027-01986
5310008299981
5310004079566
5305002693218
5310000563395
5310000446477
5310004838790
5306010758519
5310008299981
5310004079566
5330012077350
4-2
(6)
DESCRIPTION AND USABLE ON CODES(UOC)
BOLT,HEX................................ .........................
WASHER,LOCK ................................ ................
BOLT,HEX................................. ........................
NUT,PLAIN,HEXAGON................................. .....
WASHER,LOCK ................................ ................
BLOCK,SHIPPING................................ .............
SCREW,CAP,HEXAGON H ...............................
NUT,PLAIN,HEXAGON................................ ......
WASHER,LOCK. ................................ ...............
PLATE,SHIPPING REAR ................. .................
BOLT,HEX ............................ ............................
WASHER,FLAT......................... ........................
PLATE,SHOCKMOUNT.................... .................
WASHER,SPECIAL. ................................ ..........
NUT,SELF-LOCKING,HE................................ ...
SHOCKMOUNT ................................ .................
BOLT,MACHINE ................................ ................
NUT;PLAIN,HEXAGON.................................. ....
WASHER,LOCK ................................ ................
PUMP,WATER ................................ ..................
BOLT................................ ................................ .
WASHER,FLAT ................................ .................
BOLT................................ ................................ .
SPACER................................ ............................
NUT................................ ................................ ...
GASKET................................ ............................
PLATE, MOUNTING ................................ ..........
GASKET................................ ............................
PACKING,PREFORMEO ................................ ...
SLEEVE................................ .............................
SWITCH,TEMPERATURE .................. ..............
SENDER,TEMPERATURE ................................
HOUSING,THERMOSTAT .................. ..............
BOLT,HEX ............................. ...........................
WASHER,FLAT ................................ .................
GASKET................................ ............................
THERMOSTAT ................................ ..................
PUMP,I NJECTOR ...................... ......................
CLAMP ,PUMP ......................4... ......................
NUT,SPECIAL ......................... .........................
SHIM PART OF KIT P/N 750-11330 ..................
SHIM PART OF KIT P/N 750-11330 ..................
SHIM PART OF KIT P/N 750-11330 ..................
ELEMENT,FILTER,FUEL ................. .................
SOLENOID,FUEL ....................... ......................
ROD PART OF KIT P/N 750-14160 ...................
BRACKET,ROD PART OF KIT P/N 750-............
14160. ................................ ............................... ..
WASHER,FLAT PART OF KIT P/N 750- ............
1460 ................................ ................................ ..
PIN,COTTER PART OF KIT P/N 9305 PART .....
OF KIT P/N 750-14160 ................................ ......
(7)
QTY
2
7
29
20
20
2
2
2
2
2
4
2
4
8
4
4
16
20
20
1
3
11
2
1
4
1
1
1
2
1
1
1
1
2
11
1
1
4
4
4
1
1
1
1
1
1
1
8
1
SECTION II
(1)
ITEM
NO.
(2)
SMR
CODE
TM-5-1730-245-24P
(3)
(4)
NSN
CAGEC
(5)
PART
NUMBER
98
99
KFFZZ
KFFZZ
97947
97947
272-00660
751-17670
100
KFFZZ
97947
757-18240
101
102
103
KFFZZ
KFFZZ
KFFZZ
97947
97947
97947
272-00679
272-00693
751-15200
104
105
106
KFFZZ
KFFZZ
KFFZZ
97947
97947
97947
272-00690
785351
757-16410
107
108
KFFZZ
KFFZZ
97947
97947
272-00688
757-18510
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
PAFZZ
PAFZZ
PAFZZ
PAFZZ
PAFZZ
PAFZZ
XBFZZ
XBFZZ
XBFZZ
PAFZZ
XBFZZ
XBFZZ
XBFZZ
PAFZZ
XBFZZ
XBFZZ
XBFZZ
XBFZZ
XBFZZ
XBFZZ
PAFZZ
XBFZZ
XBFZZ
XBFZZ
XBFZZ
XBFZZ
PAFZZ
PAFZZ
PAFZZ
XBFZZ
XBFZZ
PAFZZ
XBFZZ
XBFZZ
PAFZZ
97947
97947
97947
97947
97947
97947
97947
D8286
19008
D8286
D8286
97947
19008
D8286
D8286
97947
97947
19008
D8286
19008
D8286
29516
29516
96906
96906
96906
96906
80204
96906
2951,6
I9008
D8286
29516
29516
97947
751-15880
751-12530
751-10580
201-45070
751-12710
201-81200
000-05809
M8-912X100-CL8.8
M8-4032-CL8-Z
M8-127A-Z
M8-125A-Z
000-05440
M8-4017X20-CL8.8
M8-127A-Z
M8-125A-Z
750-13290
751-16260
M12-4017X50-CL8.
M12-125A-Z
M8-4032-CL8-Z
M8-127A-Z
9305-306
9305-303
MS52131-1
MS35207-263
MS35650-302
MS35338-43
B1821BHO31C050N
MS35338-45
9305-302
M10-4017X20-CL8.
M10-127A-Z
9305-304
9305-305
364830
5330010877373
5305009897434
5310009349751
5310000453296
5306002264822
5310004079566
4-3
(6)
DESCRIPTION AND USABLE ON CODES(UOC)
SCREW PART OF KIT P/N 750-14160 ..............
BRACKET,MOUNTING PART OF KIT P/N 750..
-14160 ................................ ...............................
STUD,SHOULDERED PART OF KIT P/N 750-...
14160 ................................ ................................
NUT PART OF KIT P/N 750-14160 .... ............... ...
BOLT PART OF KIT P/N 750-14160 ...... ...........
LEVER,STOP/RUN PART OF KIT P/N 750-.......
14160 ................................ ................................
SCREW PART OF KIT P/N 750-14160 ..... ........
WASHER PART OF KIT P/N 750-14160 .... .......
CABLE ASSEMBLY PART OF KIT P/N 750- ......
14160 ................................ ................................
WASHER PART OF KIT P/N 750-14160 .... .......
ADAPTER,STUD PART OF KIT P/N 750-...........
14160 ................................ ................................
INJECTOR,FUEL................................ ...............
BOLT,SPECIAL ................................ .................
CLAMP,INJECTOR ................... ........................ ...
GASKET,COPPER ................... ........................ ....
NUT,SPECIAL ......................... .........................
SEAL,SPECIAL..................................................
ALTERNATOR,24V ...........................................
BOLT,SOCKET HEAD .................... ..................
NUT ................................ ................................ ..
WASHER,LOCK ......................... ......................
WASHER,FLAT ......................... .......................
BRACKET,ALTERNATOR .................................
BOLT ................................ ................................
WASHER,LOCK ......................... ......................
WASHER,FLAT ......................... .......................
STARTER ............................. ............................
SPACER,STARTER ..........................................
BOLT ................................ ................................
WASHER,FLAT ......................... .......................
NUT ................................. ................................ .
WASHER,LOCK ......................... ......................
CABLE ASSEMBLY ...................... ....................
CABLE ASSEMBLY ...................... ....................
CONNECTOR,ELECTRIC .................................
SCREW,MACHINE....................... .....................
NUT,PLAIN,HEXAGON ................... ..................
WASHER,LOCK......................... .......................
BOLT,MACHINE........................ ........................
WASHER,LOCK......................... .......................
CABLE ASSEMBLY ...................... ....................
BOLT,HEX ............................ ............................
WASHER,LOCK ......................... ......................
CABLE ASSEMBLY ...................... ....................
CABLE ASSEMBLY ...................... ....................
GLOW PLUG ........................... .........................
(7)
QTY
1
1
1
4
2
1
2
1
1
1
1
4
4
4
4
8
8
1
1
4
4
11
1
1
4
11
1
1
2
2
4
1
1
1
1
4
4
4
2
4
1
1
7
1
1
2
SECTION II
TM-5-1730-245-24P
(1)
ITEM
NO.
(2)
SMR
CODE
(3)
(4)
NSN
CAGEC
(5)
PART
NUMBER
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
PAFZZ
PAFZZ
PAFZZ
XBFZZ
PAFZZ
XBFZZ
XBFZZ
PAFZZ
PAFZZ
PAFZZ
XBFZZ
XBFZZ
PAFZZ
PAFZZ
PAFZZ
PAFZZ
PAFZZ
97947
97947
29516
I9008
D8286
I9008
D8286
29516
09527
13445
93061
93061
97947
97947
97947
97947
29516
751-12800
751-10390
9305-110
M10-4014X160-CL8
M10-127A-Z
M8-4017X10-CL8.8
M8-127A-Z
9305-110-4
SD0006
8647
1/8MMO-B
125PN-2
757-17650
757-13204
752674
785613
750-14160
PAFZZ
97947
750-11330
4-4
(6)
DESCRIPTION AND USABLE ON CODES(UOC)
GASKET,GEAR COVER ................................ ...
SEAL,LIP ................................ ..........................
MUFFLER................................ ..........................
BOLT,HEX ................................ .......................
WASHER,LOCK ................................ ................
BOLT,HEX ................................ ........................
WASHER,LOCK ................................ ...............
GASKET ................................ .........................
SENDER,OIL PRESSURE ................................ .
SWITCH,OIL PRESSURE ................................ .
TEE,BRASS ................................ .....................
NIPPLE,BRASS ................................ .................
ADAPTER,BUSHING................................ .........
ADAPTER,HYD PUMP................................ .......
SCREW................................. ............................
WASHER,FLAT ................................ ................
KIT,MOUNTING,FUEL ................................ ......
ADAPTER,STUD
(
1)
4-108
ADAPTER,STUD
(
1)
4-108
BOLT
(
2)
4-102
BOLT
(
2)
4-102
BRACKET,ROD
(
1)
4-95
BRACKET,ROD
(
1)
4-95
BRACKET,MOUNTING (
1)
4-99
BRACKET,MOUNTING (
1)
4-99
CABLE ASSEMBLY
(
1)
4-106
CABLE ASSEMBLY
(
1)
4-106
LEVER,STOP/RUN
(
1)
4-103
LEVER,STOP/RUN
(
1)
4-103
NUT
(
4)
4-101
NUT
(
4)
4-101
PIN,COTTER
(
1)
4-97
PIN,COTTER
(
1)
4-97
ROD
(
1)
4-94
ROD
(
1)
4-94
SCREW
(
1)
4-98
SCREW
(
1)
4-98
SCREW
(
2)
4-104
SCREW
(
2)
4-104
STUD,SHOULDERED
(
1)
4-100
STUD,SHOULDERED
(
1)
4-100
WASHER
(
1)
4-105
WASHER
(
1)
4-105
WASHER
(
1)
4-107
WASHER
(
1)
4-107
WASHER,FLAT
(
8)
4-96
WASHER,FLAT
(
8)
4-96
KIT,SHIM ................................ ..........................
SHIM
(
1)
4-89
SHIM
(
1)
4-89
SHIM
(
1)
4-90
SHIM
(
1)
4-90
(7)
QTY
1
1
1
2
7
1
4
1
1
1
1
1
1
1
1
1
1
1
SECTION II
(1)
ITEM
NO.
(2)
SMR
CODE
TM-5-1730-245-24P
(3)
(4)
NSN
CAGEC
(5)
PART
NUMBER
(6)
DESCRIPTION AND USABLE ON CODES(UOC)
SHIM
SHIM
(
(
END OF FIGURE
4-5
(7)
1)
1)
4-91
4-91
QTY
TM 5-1730-245-24P
Figure 5. Special Tools.
SECTION III
(1)
ITEM
NO.
(2)
SMR
CODE
TM-5-1730-245-24P
(3)
(4)
NSN
CAGEC
(5)
PART
NUMBER
(6)
DESCRIPTION AND USABLE ON CODES(UOC)
(7)
QTY
GROUP 05 SPECIALTOOLS
FIG. 5 SPECIALTOOLS
1
2
3
4
PAFZZ
PAFZZ
PAFZZ
PAFZZ
29516
29516
29516
29516
9305-801
9305-802
9305-803
9305-804
GAUGE,RACK SETTING................................ ...
GAUGE,GOVERNOR ................................ .....
TOOL,GEAR END SEAL ...................................
TOOL,FLYWHEEL LOCK .................. ...............
END OF FIGURE
5-1
1
1
1
1
SECTION IV
TM5-1730-245-24P
CROSS-REFERENCE INDEXES
STOCK NUMBER
FIG.
5920-00-011-7142
5310-00-045-3296
1
1
1
1
2
2
3
3
3
3
4
3
1
4
1
1
1
1
3
2
2
2
2
2
3
4
4
4
4
1
3
2
3
3
3
3
3
3
3
4
4
4
3
1
1
1
3
2
2
3
5305-00-068-0500
5930-00-221-8992
5306-00-226-4822
5310-00-261-8278
5330-00-285-9842
5320-00-343-5435
5310-00-407-9566
5319-00-483-8792
5310-00-543-2410
5330-00-582-2577
5310-00-582-5965
5330-00-816-3546
5310-00-839-2066
5310-00-934-9762
5310-00-997-1888
5325-00-998-3351
5310-01-056-0177
NATIONAL STOCK NUMBER INDEX
ITEM
STOCK NUMBER
40
12
34
53
33
54
37
41
47
51
136
89
1
137
16
22
28
48
66
14
23
26
29
7
21
53
67
138
25
43
63
19
3
80
83
86
90
97
101
9
29
37
56
37
15
27
5
36
57
71
5330-01-087-7373
4730-01-093-8464
5330-01-207-7350
4720-01-411-4003
I-1
FIG.
ITEM
4
3
4
4
114
73
77
6
SECTION IV
TM5-1730-245-24P
CROSS-REFERENCE INDEXES
CAGEC
PART NUMBER
07707
AD43AH
93061
09527
09527
AN912-13
AP0532
BL0037
80204
60012
B1821BH031C050N
CD-109
OJVY1
OJVY1
OJVY1
OJVY1
81349
09527
09527
0'9527
09527
09527
0952'7
DH2ULVJN
FB-G
FB-08OBN
FBB-080-40
F02A125V10A
GP0634
GP0709
GPO803
GP0634
GY0094F
GY0099F
0691.
06915
HSS-08
HSS-20
06915
HSS-36
75915
97947
09527
09527
96906
96906
HW0126
LPW4-01
LS6022
MH0042
MIL-B-111881/2
MS15759-946
96906
96906
96906
96906
96906
96906
96906
96906
96906
MS17829-4C
MS17829-6C
MS28775-012
MS28778-04
MS28778-08
MS28778-10
MS28778-20
MS35206-217
MS35207-263
PART NUMBER INDEX
STOCK NUMBER
5320-00-343-5435
5306-00-226-4822
5920-00-011-7142
5310-00-483-8792
5330-00-285-9842
5330-00-816-3546
I-2
FIG.
2
2
2
2
3
1
1
1
1
1
4
2
2
2
3
3
3
3
1
1
1
1
4
1
1
1
4
4
4
4
4
1
4
4
1
4
1
1
1
1
4
4
3
3
3
3
3
1
2
2
3
ITEM
14
23
26
29
54
46
19
25
31
50
137
21
24
27
19
10
11
8
40
14
26
20
80
18
24
30
4
32
34
18
20
54
47
15
51
22
17
23
29
49
25
63
107
109
106
66
56
45
32
53
40
SECTION IV
TM5-1730-245-24P
CROSS-REFERENCE INDEXES
CAGEC
PART NUMBER
PART NUMBER INDEX
STOCK NUMBER
96906
MS35207-263
96906
MS35207-269
96906
MS35338-100
5310-00-261-8278
96906
96906
MS35338-40
MS35338-43
5310-00-543-2410
5310-00-045-3296
96906
MS35338-44
5310-00-582-5965
96906
MS35338-45
5310-00-407-9566
96906
96906
MS35338-46
MS35649-22
96906
MS35649-2252
5310-00-997-1888
96906
MS35649-2312
96906
96906
96906
MS35649-2382
MS35649-242
MS35649-282
96906
MS35649-286
5310-00-934-9762
I-3
FIG.
3
4
3
3
1
1
1
1
1
1
1
1
2
2
3
3
3
3
4
2
3
3
3
3
3
3
3
4
4
4
2
3
4
4
4
4
4
4
4
2
3
3
2
4
4
4
1
1
1
1
1
ITEM
50
134
36
46
16
22
28
48
43
12
34
53
33
54
37
41
47
51
136
19
3
80
83
86
90
97
101
9
29
37
7
21
53
67
138
57
11
28
36
20
5
98
8
52
66
56
42
11
33
15
21
SECTION IV
TM5-1730-245-24P
CROSS-REFERENCE INDEXES
CAGEC
PART NUMBER
PART NUMBER INDEX
STOCK NUMBER
96906
MS35649-286
5310-00-934-9762
96906
MS35650-302
1
96906
96906
96906
MS35691-45
MS51412-19
MS51412-23
96906
96906
96906
96906
96906
96906
96906
96906
96906
96906
96906
96906
MS51412-25
MS51512-B12
MS51525-B04
MS51525-B10
NS51525-B12
MS51525-B20
MS51527-B04
MS51527-B10
MS51529-B10
MS51529-B12
MS51575-25
MS51840-44
96906
MS51850-44
96906
96906
96906
93061
96906
96906
96906
96906
MS51860-11
MS51860-57
MS51860-58
MS51953C-73
MS52131-1
MS9020-12
MS90725-16
MS90725-3
5310-00-839-2066
5310-01-056-0177
4730-01-093-8464
5330-00-582-2577
5305-00-068-0500
I-4
FIG.
ITEM
1
1
52
2
2
3
3
3
3
4
1
1
3
3
4
4
4
3
3
3
3
3
3
3
3
3
3
2
2
2
2
4
4
1
2
2
2
3
3
3
3
3
3
4
3
3
3
3
3
3
3
27
47
34
55
38
42
48
52
135
37
44
4
87
10
38
60
53
113
65
62
55
110
67
68
69
22
10
12
41
45
13
16
57
39
48
50
7
9
57
71
73
59
133
63
100
79
82
85
89
95
SECTION IV
TM5-1730-245-24P
CROSS-REFERENCE INDEXES
CAGEC
PART NUMBER
96906
MS90725-32
96906
96906
MS90725-36
MS90725-6
96906
96906
19008
D8286
D8286
MS90725-68
MS90725-72
M10.4017X20-CL8.
M10-125A-Z
M10-127A-Z
19008
19008
19008
D8286
D8286
19008
D8286
M10-4014X160-CL8
M10-4017X20-CL8.
M100-4017X30-CL8.
M10-912X30-CL8.8
M12-125A-Z
M12-4017X50-CL8.
M8-125A-Z
D8286
M8-127A-Z
19008
19008
19008
19008
19008
19008
M8-4014X45-CL8.8
M8-4014X60-CL8.8
M8-4014X75-CL8.8
M8-4017X10-CL8.8
M8-4017X20-CL8.8
M8-4032-CL8-Z
D8286
60012
M8-912X100-CL8.8
ND-1252
09527
97947
97947
97947
97947
97947
97947
SD0006
000-05440
000-05441
000-05809
000-06477
000-07115
000-07271
PART NUMBER INDEX
STOCK NUMBER
4720-01-411-4003
I-5
FIG.
2
3
4
4
2
3
3
4
4
4
4
4
4
4
3
3
4
4
4
4
4
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
2
2
4
4
4
4
4
4
4
ITEM
6
20
51
65
18
2
96
8
24
27
35
55
59
49
16
15
50
141
149
148
140
14
18
128
127
70
83
119
123
118
122
130
151
71
82
69
150
121
73
117
129
116
22
25
153
120
124
115
6
93
72
SECTION IV
TM5-1730-245-24P
CROSS-REFERENCE INDEXES
CAGEC
PART NUMBER
97947
97947
93061
93061
04198
000-07272
027-01986
1/4HP-S
1/8MM0-B
101A167-07
29516
93061
OPCZD
04198
125HBL-4-4
125PN-2
1251
20DW1001TH01B
97947
97947
73752
13445
97947
97947
97947
97947
97947
93061
75915
97947
6238L9
OE328
97947
97947
97947
97947
97947
97947
97947
29516
97947
97947
97947
97947
97947
97947
97947
97947
97947
97947
97947
97947
97947
97947
97947
97947
97947
97947
201-45070
201— 81200
2525
2609SC
272-00660
272-00679
272-00688
272-00690
272-00693
30128-2L-2B
342048
364830
46202LR
5324K13
601-20691
750-11330
750-11330-1
750-11330-2
750-11330-3
750-12380
750-13290
750-14160
750-40621
751-10390
751-10580
751-11460
751-11722
751-12530
751-12710
751-12800
751-15200
751-15880
751-16260
751-17670
751-40111
751-40203
751-40211
751-40280
751-40441
751-40450
PART NUMBER INDEX
STOCK NUMBER
5330-01-087-7373
5330-01-207-7350
I-6
FIG.
ITEM
4
4
4
4
1
1
4
4
1
1
1
4
4
3
1
4
4
4
4
4
4
1
4
I
4
4
4
4
4
4
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
46
98
2
155
1.3
35
5
156
56
10
32
112
114
60
55
98
1-01
107
104
102
7
39
144
41
39
77
162
89
90
91
17
125
161
68
146
111
88
87
110
113
145
103
109
126
99
81
75
74
84
78
76
SECTION IV
TM5-1730-245-24P
CROSS-REFERENCE INDEXES
CAGEC
PART NUMBER
97947
97947
97947
97947
97947
97947
97947
97947
97947
97947
97947
97947
97947
97947
97947
13445
751-40520
751-40981
751-41191
751-41201
752674
754-17680
757-13204
757-16370
757-16410
757-17650
757-18240
757-18510
785351
785352
785613
8304
13445
13445
94222
8307
83355
85-15-160-16
96906
94222
85-24-201-20
85-47-101-15
13445
13445
13445
13445
13445
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
8507
85753
8647
9095
9115
9305-101
9305-105
9305-106
9305-109
9305-110
9305-110-4
9305-111
9305-112
9305-113
9305-113-3
9305-114
9305-115
9305-116
9305-117
9305-117-3
9305-118
9305-119-1
9305-119-2
9305-120-1
9305-120-2
9305-121
9305-122
PART NUMBER INDEX
STOCK NUMBER
5325-00-998-3351
5930-00-221-8992
I-7
FIG.
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
1
1
1
1
2
2
2
2
2
1
1
4
1
1
2
2
2
3
4
4
2
4
3
3
2
2
4
4
4
4
3
3
3
3
2
2
ITEM
45
85
44
86
159
94
158
95
106
157
100
108
105
96
160
3
6
2
8
35
56
37
36
57
5
9
154
1
4
58
40
1
94
147
152
42
48
1
6
47
49
26
1
12
58
39
35
49
45
2
3
SECTION IV
TM5-1730-245-24P
CROSS-REFERENCE INDEXES
CAGEC
PART NUMBER
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
9305-123
9305-124
9305-125
9305-126
9305-127
9305-128
9305-129
9305-130
9305-131
9305-132
9305-133
29516
29516
29516
29516
29516
29516
9305-134
9305-135
9305-136
9305-137
9305-138
9305-139
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
9305-201-1
9305-201-2
9305-201-3
9305-201-4
9305-201-6
9305-202
9305-203
9305-204
9305-205
9305-205-1
9305-206
9305-206-1
9305-207
9305-208
9305-209
9305-210
9305-211
9305-212
9305-213
9305-214
9305-215
9305-216
9305-217
9305-218
9305-219
9305-220
9305-221
9305-222
9305-223
9305-302
9305-303
9305-304
PART NUMBER INDEX
STOCK NUMBER
FIG.
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
4
2
4
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
1
4
4
4
4
4
4
3
4
3
1
3
2
3
4
4
4
I-8
ITEM
4
5
43
17
9
11
13
16
15
30
31
52
38
44
51
12
62
28
23
93
99'
64
103
104
105
81
78
76
77
74
75
102
70
72
36
54
64
61
14
21
92
23
17
13
38
88
46
108
139
132
142
SECTION IV
TM5-1730-245-24P
CROSS-REFERENCE INDEXES
CAGEC
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
13445
PART NUMBER
PART NUMBER INDEX
STOCK NUMBER
9305-305
9305-306
9305-307
9305-401
9305-402
9305-407
9305-408
9305-409
9305-410
9305-411
9305-412
9305-413
9305-414
9305-415
9305-416
9305-417
9305-418
9305-419
9305-420
9305-421
9305-421-1
9305-422
9305-423
9305-424
9305-425
9305-426
9305-427
9305-428
9305-429
9305-430
9305-431
9305-432
9305-801
9305-802
9305-803
9305-804
95509
FIG.
4
4
4
4
4
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
3
3
3
3
4
4
4
4
4
3
3
5
5
5
5
1
I-9
ITEM
143
131
79
31
33
24
25
26
27
28
29
30
31
32
33
34
43
44
84
30
43
91
92
58
61
3
40
19
41
42
111
112
1
2
3
4
7
SECTION IV
TM5-1730-245-24P
CROSS-REFERENCE INDEXES
FIG.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
I
1
1
1
1
1
1
1
1
1
1
1
1
1
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18'
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
FIGURE AND ITEM NUMBER INDEX
STOCK NUMBER
CAGEC
5930-00-221-8992
5310-00-045-3296
5310-00-934-9762
5310-00-261-8278
5310-00-261-8278
5310-00-934-9762
5310-00-261-8278
5310-00-045-3296
5310-00-839-2066
5920-00-011-7142
5310-00-543-2410
5310-00-261-8278
I-10
13445
13445
13445
13445
13445
13445
13445
13445
13445
04198
96906
96906
04198
09527
96906
96906
96906
09527
09527
09527
96906
96906
96906
09527
09527
09527
96906
96906
96906
09527
09527
04198
96906
96906
04198
29516
96906
29516
75915
81349
62389
96906
96906
96906
96906
09527
96906
96906
96906
09527
09527
PART NUMBER
9095
8307
8304
9115
8507
8304
95509
83355
85753
20W1001TH01B
MS35649-282
MS35338-43
101A167-07
GP0634
MS35649-286
MS35338-100
MS15759-946
GY0094F
BL0037
GP0803
MS35649-286
MS35338-100
MS15759-946
GY0099F
BL0037
GP0709
MS35649-286
MS35338-100
MS15759-946
GY0099F
BL0037
20W1001TH01B
MS35649-282
MS35338-43
101A167-07
9305-210
MS35691-45
9305-220
342048
F02A125V10A
46202LR
MS35649-242
MS35338-40
MNS51412-19
MS35206-217
AP0532
MS35649-286
MS35338-100
MS15759-946
BL0037
MH0042
SECTION IV
TM5-1730-245-24P
CROSS-REFERENCE INDEXES
FIG.
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
ITEM
52
53
54
55
56
57
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
FIGURE AND ITEM NUMBER INDEX
STOCK NUMBER
CAGEC
5310-00-045-3296
5310-00-407-9566
5320-00-343-5435
5310-00-582-5965
5320-00-343-5435
5320-00-343-5435
5320-00-343-5435
5310-00-045-3296
5325-00-998-3351
I-11
96906
96906
75915
13445
OPCZO
96906
29516
29516
29516
29516
29516
96906
96906
96906
29516
96906
29516
96906
29516
07707
29516
29516
29516
96906
96906
96906
60012
60012
07707
60012
60012
07707
60012
29516
07707
29516
29516
96906
96906
96906
94222
94222
96906
29516
96906
29516
96906
29516
29516
29516
96906
PART NUMBER
MS35650-302
MS35338-43
HW0126
2609SC
1251
MS51850-44
9305-106
9305-121
9305-122
9305-123
9305-124
MS90725-32
MS35338-45
MS35649-2312
9305-127
MS51840-44
9305-128
MS51840-44
9305-129
AD43AH
9305-131
9305-130
9305-126
MS90725-6
MS35338-44
MS35649-2252
CD-109
ND-1252
AD43AH
CD-109
ND-1252
AD43AH
CD-109
9305-139
AD43AH
9305-132
9305-133
MS35207-263
MS35338-43
MS35650-302
85-15-160-16
85-47-101-15
85-24-201-20
9305-134
MS51850-44
9305-105
MS51840-44
9305-111
9305-125
9305-135
MS51840-44
SECTION IV
TM5-1730-245-24P
CROSS-REFERENCE INDEXES
FIG.
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3'
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
ITEM
46
47
48
49
50
51
52
53
54
55
56
57
58
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
FIGURE AND ITEM NUMBER INDEX
STOCK NUMBER
CAGEC
5310-00-045-3296
5325-00-998-3351
5310-00-582-5965
5310-00-997-1888
5310-00-407-9566
5310-00-045-3296
I-12
29516
29516
96906
29516
96906
29516
29516
96906
96906
96906
94222
94222
29516
29516
96906
96906
96906
96906
29516
96906
OJVY1
96906
OJVY1
OJVY1
29516
29516
19008
D8286
D8286
97947
D8286
OJVY1
96906
96906
96906
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
29516
96906
96906
96906
PART NUMBER
9305-222
9305-114
MS51850-44
9305-115
MS51850-44
9305-136
9305-133
MS35207-263
MS35338-43
MS35650-302
85-15-160-16
85-47-101-15
9305-101
9305-113
MS90725-6
MNS35338-44
MS51412-23
MS35649-2252
9305-113-3
MS51850-44
FBB-080-40
MS51850-44
FB-G
FB-O80BN
9305-137 1
9305-219
M10-4017X30-CL8.
M10-127A-Z
M10-125A-Z
750-12380
M10-912X30-CL8.8
DH2ULVJN
MS90725-32
MS35338-45
NS51575-25
9305-217
9305-407
9305-408
9305-409
9305-410
9305-411
9305-412
9305-413
9305-414
9305-415
9305-416
9305-417
9305-119-2
MS35207-269
MS35338-43
MS35650-302
SECTION IV
TM5-1730-245-24P
CROSS-REFERENCE INDEXES
FIG.
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
ITEM
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
FIGURE AND ITEM NUMBER INDEX
STOCK NUMBER
CAGEC
5310-00-045-3296
5310-00-045-3296
5310-00-045-3296
5330-00-816-3546
5330-00-582-2577
5330-00-285-9842
5310-01-056-0177
4730-01-093-8464
5310-00-582-5965
5310-00-582-5965
5310-00-582-5965
5305-00-068-0500
I-13
29516
96906
96906
96906
29516
29516
29516
96906
96906
96906
29516
96906
96906
96906
96906
93061
96906
96906
96906
29516
93061
73752
29516
96906
96906
29516
96906
96906
96906
96906
96906
29516
96906
29516
96906
29516
29516
29516
29516
29516
96906
96906
29516
96906
96906
29516
96906
96906
96906
29516
96906
PART NUMBER
9305-119-1
MS35207-263
MS35338-43
MS35650-302
9305-418
9305-419
9305-120-2
MS35207-269
MS35338-43
MS35650-302
9305-120-1
MS35207-263
MS35338-43
MS35650-302
MS51512-B12
AN912-13
MS51525-B20
MS28778-20
MS51860-11
9305-424
MS51953C-73
2525
9305-425
MS51525-B12
MS9020-12
9305-201-3
MS51525-B10
MS28778-10
MS51527-B10
MS51529-B10
MS51529-B12
9305-208
MS51860-57
9305-209
MS51860-58
9305-206
9305-206-1
9305-205
9305-205-1
9305-204
MS90725-3
MS35338-44
9305-203
MS90725-3
MS35338-44
9305-420
MS90725-3
MS35338-44
MS51412-23
9305-221
MS90725-3
SECTION IV
TM5-1730-245-24P
CROSS-REFERENCE INDEXES
FIG.
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
ITEM
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
FIGURE AND ITEM NUMBER INDEX
STOCK NUMBER
CAGEC
5310-00-582-5965
5310-00-582-5965
5310-00-582-5965
4720-01-411-4003
5310-00-582-5965
5310-00-483-8792
I-14
96906
29516
29516
29516
29516
96906
96906
96906
96906
29516
96906
96906
29516
29516
29516
29516
96906
96906
29516
96906
96906
29516
29516
96906
29516
93061
29516
06915
29516
97947
93061
96906
96906
96906
96906
29516
96906
29516
09527
96906
29516
06915
29516
06915
29516
96906
29516
96906
96906
29516
96906
PART NUMBER
MS35338-44
9305-422
9305-423
9305-201-1
9305-109
MS90725-3
MS90725-6
MS35338-44
M'535649-2252
9305-201-2
MS90725-16
MS35338-44
9305-207
9305-201-4
9305-201-6
9305-202
MS28778-08
MS28775-012
9305-223
MS28778-04
MS51527-B04
9305-431
9305-432
MS51525-B04
9305-117
1/4HP-S
9305-426
HSS-08
125HBL-4-4
000-06477
30128-2L-2B
fMS90725-6
MS35338-44
MS51412-23
MS35649-22
9305-117-3
MS51840-44
9305-214
LS6022
MS51840-44
9305-218
HSS-36
9305-428
HSS-36
9305-215
MIL-B-111881/2
9305-139
MS90725-6
MS17829-4C
9305-116
MS90725-6
SECTION IV
TM5-1730-245-24P
CROSS-REFERENCE INDEXES
FIG.
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
ITEM
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
FIGURE AND ITEM NUMBER INDEX
STOCK NUMBER
CAGEC
5310-00-582-5965
5310-00-582-5965
5310-00-407-9566
5310-00-407-9566
5330-01-207-7350
I-15
96906
96906
29516
29516
06915
29516
06915
96906
96906
96906
96906
OE328
29516
29516
29516
29516
97947
97947
97947
97947
29516
19008
D8286
96906
96906
96906
29516
96906
96906
96906
29516
96906
96906
29516
29516
96906
29516
96906
96906
96906
97947
19008
D8286
19008
97947
19008
97947
97947
97947
97947
97947
PART NUMBER
MS35649-22
MS35338-44
9305-421
9305-401
HSS-20
9305-402
HSS-20
MS90725-6
MS35649-22
MS35338-44
MS51412-23
5324K13
9305-427
9305-429
9305-430
9305-421-1
751-41191
751-40520
000-07272
LPW4-01
9305-112
M10.4017X20-CL8.
M10-127A-Z
MS90725-32
MS35649-2312
MS35338-45
9305-211
MS90725-68
MS35649-2382
MS35338-46
9305-118
MS90725-72
MS51412-25
9305-213
9305-138
MS17829-6C
9305-212
MS90725-36
MS35649-2312
MS35338-45
750-40621
M8-4014X75-CL8.8
M8-125A-Z
M8-4014X45-CL8.8
000-07271
M8-4032-CL8-Z
751-40211
751-40203
751-40450
601-20691
751-40441
SECTION IV
TM5-1730-245-24P
CROSS-REFERENCE INDEXES
FIG.
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
ITEM
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
98
98
99
100
101
.102
103
104
105
106
107
108
109
110
111
112
-113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
FIGURE AND ITEM NUMBER INDEX
STOCK NUMBER
CAGEC
5330-01-087-7373
I-16
29516
09527
97947
I9008
D8286
97947
97947
97947
97947
97947
97947
97947
97947
29516
97947
97947
97947
97947
97947
97947
97947
97947
97947
97947
97947
97947
97947
97947
97947
97947
97947
97947
97947
97947
97947
97947
97947
D8286
19008
D8286
D8286
97947
19008
D8286
D8286
97947
97947
97947
19008
D8286
19008
PART NUMBER
9305-307
GP0634
751-40111
M8-4014X60-CL8.8
M8-125A-Z
751-40280
751-40981
751-41201
751-11722
751-11460
750-11330-1
750-11330-2
750-11330-3
9305-216
000-07115
754-17680
757-16370
785352
027-01986
272-00660
751-17670
757-18240
272-00679
272-00693
751-15200
272-00690
785351
757-16410
272-00688
757-18510
751-15880
751-12530
751-10580
201-45070
751-12710
201-81200
000-05809
M8-912X100-CL8.8
M8-4032-CL8-Z
M8-127A-Z
M8-125A-Z
000-05440
M8-4017X20-CL8.8
M8-127A-Z
M8-125A-Z
000-05441
750-13290
751-16260
M12-4017X50-CL8.
M12-125A-Z
M8-4032-CL8-Z
SECTION IV
TM5-1730-245-24P
CROSS-REFERENCE INDEXES
FIG.
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
ITEM
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
1
2
3
4
FIGURE AND ITEM NUMBER INDEX
STOCK NUMBER
CAGEC
5310-00-045-3296
5306-00-226-4822
5310-00-407-9566
I-17
D8286
29516
29516
96906
96906
96906
96906
80204
96906
29516
19008
D8286
29516
29516
97947
97947
97947
29516
19008
D8286
19008
D8286
29516
09527
13445
93061
93061
97947
97947
97947
97947
29516
97947
29516
29516
29516
29516
PART NUMBER
M8-127A-Z
9305-306
9305-303
MS52131-1
MS35207-263
MS35650-302
MS35338-43
B1821BH031C050N
MS35338-45
9305-302
M10-4017X20-CL8.
M10-127A-Z
9305-304
9305-305
364830
751-12800
751-10390
9305-110
M10-4014X160-CL8
M10-127A-Z
M8-4017X10-CL8.8
M8-127A-Z
9305-110-4
SD0006
8647
1/8MMO-B
125PN-2
757-17650
757-13204
752674
785613
750-14160
750-11330
9305-801
9305-802
9305-803
9305-804
These are the instructions for sending an electronic 2028
The following format must be used if submitting an electronic 2028. The subject line must be exactly the same and all
fields must be included; however only the following fields are mandatory: 1, 3, 4, 5, 6, 7, 8, 9, 10, 13, 15, 16, 17, and 27.
From: "Whomever" <whomever@avma27.army.mil>
To:
mpmt%avma28@st-louis-emh7.army.mil
Subject: DA Form 2028
1. From: Joe Smith
2. Unit: home
3. Address: 4300 Park
4. City: Hometown
5. St.: MO
6. Zip: 77777
7. Date Sent: 19-OCT-93
8. Pub no: 55-2840-229-23
9. Pub Title: TM
10. Publication Date: 04-JUL-85
11. Change Number: 7
12. Submitter Rank: MSG
13. Submitter FName: Joe
14. Submitter MName: T
15. Submitter LName: Smith
16. Submitter Phone: 123-123-1234
17. Problem: 1
18. Page: 2
19. Paragraph: 3
20. Line: 4
21. NSN: 5
22. Reference: 6
23. Figure: 7
24. Table: 8
25. Item: 9
26. Total: 123
27. Text:
This is the text for the problem below line 27.
U.S. GOVERNMENT PRINTING OFFICE: 1996 - 755-025/40225
The Metric System and Equivalents
Linear Measure
Liquid Measure
1 centiliter = 10 milliters = .34 fl. ounce
1 deciliter = 10 centiliters = 3.38 fl. ounces
1 liter = 10 deciliters = 33.81 fl. ounces
1 dekaliter = 10 liters = 2.64 gallons
1 hectoliter = 10 dekaliters = 26.42 gallons
1 kiloliter = 10 hectoliters = 264.18 gallons
1 centimeter = 10 millimeters = .39 inch
1 decimeter = 10 centimeters = 3.94 inches
1 meter = 10 decimeters = 39.37 inches
1 dekameter = 10 meters = 32.8 feet
1 hectometer = 10 dekameters = 328.08 feet
1 kilometer = 10 hectometers = 3,280.8 feet
Square Measure
Weights
1 sq. centimeter = 100 sq. millimeters = .155 sq. inch
1 sq. decimeter = 100 sq. centimeters = 15.5 sq. inches
1 sq. meter (centare) = 100 sq. decimeters = 10.76 sq. feet
1 sq. dekameter (are) = 100 sq. meters = 1,076.4 sq. feet
1 sq. hectometer (hectare) = 100 sq. dekameters = 2.47 acres
1 sq. kilometer = 100 sq. hectometers = .386 sq. mile
1 centigram = 10 milligrams = .15 grain
1 decigram = 10 centigrams = 1.54 grains
1 gram = 10 decigram = .035 ounce
1 decagram = 10 grams = .35 ounce
1 hectogram = 10 decagrams = 3.52 ounces
1 kilogram = 10 hectograms = 2.2 pounds
1 quintal = 100 kilograms = 220.46 pounds
1 metric ton = 10 quintals = 1.1 short tons
Cubic Measure
1 cu. centimeter = 1000 cu. millimeters = .06 cu. inch
1 cu. decimeter = 1000 cu. centimeters = 61.02 cu. inches
1 cu. meter = 1000 cu. decimeters = 35.31 cu. feet
Approximate Conversion Factors
To change
To
inches
feet
yards
miles
square inches
square feet
square yards
square miles
acres
cubic feet
cubic yards
fluid ounces
pints
quarts
gallons
ounces
pounds
short tons
pound-feet
pound-inches
centimeters
meters
meters
kilometers
square centimeters
square meters
square meters
square kilometers
square hectometers
cubic meters
cubic meters
milliliters
liters
liters
liters
grams
kilograms
metric tons
Newton-meters
Newton-meters
Multiply by
To change
2.540
.305
.914
1.609
6.451
.093
.836
2.590
.405
.028
.765
29,573
.473
.946
3.785
28.349
.454
.907
1.356
.11296
ounce-inches
centimeters
meters
meters
kilometers
square centimeters
square meters
square meters
square kilometers
square hectometers
cubic meters
cubic meters
milliliters
liters
liters
liters
grams
kilograms
metric tons
To
Newton-meters
inches
feet
yards
miles
square inches
square feet
square yards
square miles
acres
cubic feet
cubic yards
fluid ounces
pints
quarts
gallons
ounces
pounds
short tons
Temperature (Exact)
°F
Fahrenheit
temperature
5/9 (after
subtracting 32)
Celsius
temperature
°C
Multiply by
.007062
.394
3.280
1.094
.621
.155
10.764
1.196
.386
2.471
35.315
1.308
.034
2.113
1.057
.264
.035
2.205
1.102
PIN: 074870-000
This fine document...
Was brought to you by me:
Liberated Manuals -- free army and government manuals
Why do I do it? I am tired of sleazy CD-ROM sellers, who take publicly
available information, slap “watermarks” and other junk on it, and sell it.
Those masters of search engine manipulation make sure that their sites that
sell free information, come up first in search engines. They did not create it...
They did not even scan it... Why should they get your money? Why are not
letting you give those free manuals to your friends?
I am setting this document FREE. This document was made by the US
Government and is NOT protected by Copyright. Feel free to share,
republish, sell and so on.
I am not asking you for donations, fees or handouts. If you can, please
provide a link to liberatedmanuals.com, so that free manuals come up first in
search engines:
<A HREF=http://www.liberatedmanuals.com/>Free Military and Government Manuals</A>
– Sincerely
Igor Chudov
http://igor.chudov.com/
– Chicago Machinery Movers