iL2215 IBM UltraPortable Data/Video Projector
User’s Guide
iL2215 IBM UltraPortable Data/Video Projector
User’s Guide
Note: Before using this information and the product it supports, read the information under
“Appendix F. Product warranties and notices” on page 49.
First Edition (October 2000)
© Copyright International Business Machines Corporation 2000. All rights reserved.
US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract
with IBM Corp.
Contents
Safety information .
About this book .
.
.
.
.
.
.
.
.
Installation and user’s guide .
.
.
.
.
.
.
.
.
Appendix A. Product specifications .
.
.
.
.
.
. v
Appendix C. Using video mirroring
.
.
. 43
. vii
Appendix D. Projected image size .
.
.
. 45
. 1
. 35
Appendix E. Help and service information
Appendix F. Product warranties and
notices . . . . . . . . . . .
.
47
. 49
Appendix B. Portable and mobile computer
activation . . . . . . . . . . . . 37
© Copyright IBM Corp. 2000
iii
iv
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
Safety information
Before installing this product, read the Safety Information.
Antes de instalar este produto, leia as Informações de Segurança.
Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.
Læs sikkerhedsforskrifterne, før du installerer dette produkt.
Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety
Information.
Avant d’installer ce produit, lisez les consignes de sécurité.
Vor der Installation dieses Produkts die Sicherheitshinweise lesen.
Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.
Lees voordat u dit product installeert eerst de veiligheidsvoorschriften.
© Copyright IBM Corp. 2000
v
Les sikkerhetsinformasjonen (Safety Information) før du installerer dette
produktet.
Antes de instalar este produto, leia as Informações sobre Segurança.
Pred inštaláciou tohto zariadenia si pečítaje Bezpečnostné predpisy.
Antes de instalar este producto lea la información de seguridad.
Läs säkerhetsinformationen innan du installerar den här produkten.
vi
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
About this book
This manual contains instructions for setting up, using, maintenance and
troubleshooting of the iL2215 IBM® UltraPortable Data/Video Projector. The
manual is divided into two parts:
Part 1: Setup guide
This guide contains the product description and expanded installation
instructions.
Part 2: Appendixes
The appendixes contain product specifications, accessories, and help and
service. It also contains the product warranties and notices.
Note: The illustrations in this manual might be slightly different from your
hardware.
Registering your option
Thank you for purchasing OPTIONS by IBM. Please take a few moments to
register your product and provide us with information that will help IBM to
better serve you in the future. Your feedback is valuable to us in developing
products and services that are important to you, as well as in developing
better ways to communicate with you. Register your option on the IBM Web
site at
http://www.ibm.com/pc/register
IBM will send you information and updates on your registered product unless
you indicate on the Web site questionnaire that you do not want to receive
further information.
© Copyright IBM Corp. 2000
vii
viii
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
Installation and user’s guide
Introduction
The iL2215 IBM® UltraPortable Data/Video Projector is specifically designed
for the mobile presenter. It offers XGA 1024 x 768 graphics with 16.7 million
colors in a small, 4.8-pound projector. It generates crisp, clear images using
Digital Light Processing (DLP) technology and features an M1-DA connector
for easy, built-in digital/analog and USB connectivity. The iL2215 is easy to
connect, easy to use, easy to transport, and easy to maintain.
The projector is compatible with these major broadcast video standards:
NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, PAL-60, and SECAM. It automatically
adjusts to optimize its performance for the incoming video. The input signal
for SECAM video is similar to other video signals and cannot be
automatically detected, therefore SECAM must be chosen manually. See
“Video standard” on page 22 for details.
Image resolution
The XGA resolution of the iL2215 projected image is 1024 x 768. The projector
cannot compress screen resolutions above 1024 x 768. If your computer screen
resolution is higher than 1024 x 768, reset it to a lower resolution before you
connect the projector.
Note: The iL2215 projector automatically expands 640 x 480 and 800 x 600
images to 1024 x 768. You can display these images at their native
resolutions by turning off the Auto Resize feature. See “Resize” on page
19 for more information.
Compatibility
The projector is compatible with a wide variety of computers and video
devices, including:
v IBM-compatible computers, including mobile computers, up to 1024 x 768
resolution.
v Apple Macintosh and PowerBook computers up to 1024 x 768 resolution.
v Most standard VCRs, DVD players, HDTV sources, camcorders, and laser
disc players.
Note: The projector is compatible with 1080i HDTV format.
© Copyright IBM Corp. 2000
1
Unpacking the projector
The projector comes with the items that are shown in the illustration. Check
to make sure that all are included. Contact your dealer if anything is missing.
If you are experienced in setting up presentation systems, use the Quick Start
card that comes with the iL2215 projector. For complete details on connecting
and operating the projector, refer to the User’s Guide.
Attention: This product contains a Metal Arc Lamp which contains Mercury.
Dispose of it as required by local ordinances and regulations.
Note: The items that come with your projector might vary depending on the
projector configuration you have ordered.
1iL2215 projector and lens cap
2Soft carrying case
3User’s Guide, Quick Start card
and multi-language online User’s
Guide CD (available after
12/31/00)
2
4Composite video cable
5Audio cable
6Audio cable adapter
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
7MI-DA analog computer cable
8Power cord
9Remote control
1Zoom ring
2Keypad
3Speaker
4Security lock
5Connector panel
7Focus ring
6Power cord connector
Usage guidelines
Observe the following guidelines when using the projector.
Attention: Do not look directly into the projection lens when the lamp is
turned on. The bright light might harm your eyes.
Attention: Do not block the grills on the projector. Restricting the airflow
can cause it to overheat and turn off. If this happens, you must wait a minute
before attempting to turn it back on.
v Handle the projector as you would any product with glass components. Be
especially careful not to drop it.
v Avoid leaving the projector in direct sunlight or extreme cold for extended
periods of time. If this happens, allow it to reach room temperature before
use.
v Transport the projector in a carrying case. Refer to Appendix A to
determine what accessories are available for your projector.
Installation and user’s guide
3
Setting up the projector
Use the following procedure to set up the projector:
1. Place the projector on a flat surface.
v The projector must be within 10 feet (3 m) of your power source and
within 6 feet (1.8 m) of your computer.
v If you want to project from behind a translucent screen, set up the
projector behind the screen. See “Rear projection” on page 23 for
instructions for reversing the image.
2. Position the projector the desired distance from the screen.
v The distance from the lens of the projector to the screen and the zoom
setting determine the size of the projected image. The following
illustration shows three projected image sizes. For more information
about image size, see “Appendix D. Projected image size” on page 45.
3. Make sure that the projector is unplugged and your computer is turned
off.
Note: If you are connecting the projector to a computer, make sure that the
distance between the computer and the projector is 6 feet or less.
4
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
in
1S-video
1To USB mouse
2Composite video
in
3Audio in
2To computer video
4MI-DA data interface
3To projector
DANGER
Electrical current from power, telephone, and communication cables is hazardous.
To avoid a shock hazard:
— Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration
of this product during an electrical storm.
— Connect all power cords to a properly wired and grounded electrical outlet.
— Connect to properly wired outlets any equipment that will be attached to this product.
— When possible, use one hand only to connect or disconnect signal cables.
— Never turn on any equipment when there is evidence of fire, water, or structural damage.
— Disconnect the attached power cords, telecommunications systems, networks, and modems before
you open the device covers, unless instructed otherwise in the installation and configuration
procedures.
— Connect and disconnect cables as described in the following table when installing, moving, or
opening covers on this product or attached devices.
Installation and user’s guide
5
To connect:
1. Turn everything OFF.
2. First attach all cables to devices.
3. Attach signal cables to connectors.
4. Attach power cords to outlet.
5. Turn device ON.
To disconnect:
1. Turn everything OFF.
2. First, remove power cords from outlet.
3. Remove signal cables from connectors.
4. Remove all cables from devices.
Connecting a computer
The projector comes with an M1-DA analog computer cable. If your computer
has a digital output, you can use the optional M1-DA digital computer cable,
sold separately. See Appendix A for ordering accessories.
1. Plug the end of the M1-DA analog computer cable (marked A) into the
connector marked AD on the projector.
2. Plug the end of the M1-DA analog computer cable into the video
connector on your computer.
in
1Audio cable
in
2MI-DA analog computer cable 3USB mouse
Note: Many mobile computers do not automatically turn on their external
video port when a secondary display device such as a projector is
connected. See your computer manual for the command that activates
the external video port. Press Fn F7 on your IBM ThinkPad to activate
the external display. Activation commands for some mobile computers
are listed in Appendix B.
Note: If you are connecting the projector to an older Macintosh computer that
does not have a 15-pin connector, you must use a Mac adapter between
the computer and the projector.
6
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
To control the computer mouse from the projector remote control or keypad,
plug the end of the M1-DA analog computer cable into the mouse connector
on your computer.
®
®
Note: The USB mouse is supported for use only with Microsoft Windows 98,
Microsoft Windows 2000 Professional, and Apple OS 8.5 and later.
To play the audio from your computer audio on the projector, plug either end
of the audio cable into the audio connector on your computer. Plug the other
end of the audio cable into the speaker connector on the projector.
For information about starting the projector and computer, go to “Starting the
projector and adjusting the image” on page 9.
Note: You do not need to restart your computer after connecting a USB
mouse. It is hot-pluggable.
Connecting a video player
Use the following procedure to connect a video player.
If your video player uses a round, one-prong composite video connector,
you’ll need only the audio cable, audio adapter, and composite video cable
that comes with the projector. If your video player uses a round, four-prong
S-video connector, you’ll need an S-video cable in addition to the audio cable
and audio adapter. The S-video cable is sold separately. See Accessories in
Appendix A.
1. Plug the yellow connector of the composite video cable into the
“video-out” connector on your video player. This connector might be
labeled “To Monitor.” Or, if you are using an S-video cable, connect it to
the “S-video out” connector on the video player.
2. Plug the other yellow connector into the composite video connector on the
projector. Or, if you are using S-video, plug the other end of the cable into
the “S-video” connector on the projector.
Installation and user’s guide
7
Note: High Definition Television (HDTV) sources are connected to the
projector using the M1-DA computer cable.
in
1Audio adapter
2Composite video cable
3Audio cable
in
1Audio adapter
in
2S-video cable
in
3Audio cable
3. Plug the white connector of the audio adapter into the left “audio out”
connector on your video player. Plug the red connector of the adapter into
the right “audio out” connector on the video player.
4. Plug the other end of the audio adapter into the audio cable.
5. Plug the audio cable into the “audio in” connector on the projector.
Note: The audio adapter is provided so that the same audio cable that is used
to connect a computer can be used with the adapter to connect a VCR.
8
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
Note: Your video player might also have a “Video Out” connector for a
coaxial cable connection. Do not use this to connect to the projector.
DANGER
Electrical current from power, telephone, and communication cables is hazardous.
To avoid a shock hazard:
— Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration
of this product during an electrical storm.
— Connect all power cords to a properly wired and grounded electrical outlet.
— Connect to properly wired outlets any equipment that will be attached to this product.
— When possible, use one hand only to connect or disconnect signal cables.
— Never turn on any equipment when there is evidence of fire, water, or structural damage.
— Disconnect the attached power cords, telecommunications systems, networks, and modems and
modems before you open the device covers, unless instructed otherwise in the installation and
configuration procedures.
— Connect and disconnect cables as described in the following table when installing, moving, or
opening covers on this product or attached devices.
To connect:
1. Turn everything OFF.
2. First attach all cables to devices.
3. Attach signal cables to connectors.
4. Attach power cords to outlet.
5. Turn device ON.
To disconnect:
1. Turn everything OFF.
2. First, remove power cords from outlet.
3. Remove signal cables from connectors.
4. Remove all cables from devices.
Starting the projector and adjusting the image
Use the following procedure to start the projector and adjust the image.
Note: Always use the power cord that comes with the projector.
1. Remove the lens cap.
2. Plug the power cord into the side of the projector, and then plug it into an
electrical outlet. A surge-protected power strip is recommended. The fans
start to run, and the Lamp LED on the top of the projector lights orange
until the software has initialized. When initialization is complete, the
Lamp LED lights green. A green Lamp LED indicates that you can press
the lamp on/offbutton to turn the lamp on and off.
Note: The first time you connect your computer to the projector, the
computer might display a message stating that new hardware was
Installation and user’s guide
9
found. The Add New Hardware Wizard window might open. Use
the wizard to install the correct device driver (the computer
considers the projector a Plug and Play monitor).
3. Turn on the lamp by pressing the lamp on/off button on the keypad. The
startup window opens.
4. If you connected a video player, turn it on. The video image displays on
the projection screen. If a computer source is active, press the source
button on the keypad or the video button on the remote control to display
your video image. You can select a default source to determine which
source the projector examines first during power-up for active video; see
“Default source” on page 23. Use the volume buttons to adjust the
volume.
5. Turn on your computer.
Note: With some computers, the order in which you turn on the
equipment is very important. Most computers should be turned on
last, after all other peripheral devices have been turned on. See your
computer documentation to determine the correct order.
v The computer image displays on the projection screen. If a video source
is active, press the source button on the keypad or the computer button
on the remote control to display the computer image. Make sure that
your notebook computer’s external video port is activated; see “Portable
and mobile computer activation chart” in Appendix B for details.
v If necessary, make adjustments to the image using the on-screen menus
of the projector. To open the menus, press the menu button on the
keypad or remote control, then select the Display or Image submenu.
For information about the menus, see “Using the on-screen menus” on
page 16.
Turning off the projector
If you want to turn off the projector for a short period of time, press the
standby button on the keypad or remote control. This removes the image from
the screen for 15 minutes, but keeps the projector running. (You can change
the amount of time the projector stays in standby mode; see “Standby time”
on page 23 for details.) After 15 minutes, the lamp turns off and the projector
keeps running. To exit from standby mode, press the standby button again. It
might take several seconds for the projection lamp to reach full power and
project the image again.
Note: Lamp life will be extended if you turn the lamp off and then wait one
minute while the lamp cools before you unplug the projector. The
Lamp LED will light green when the lamp has cooled.
10
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
Using the projector
This section describes how to use and make adjustments to the projector. It
also provides a reference to the keypad and remote-control buttons and the
options that are available from the on-screen menus.
Basic image adjustment
To adjust the image, do the following.
v Make sure you have turned on your equipment in the right order.
See“Starting the projector and adjusting the image” on page 9.
v If the image is not displayed completely, zoom the image (see “Adjusting
the projector” on page 13), adjust the height of the projector (see“Adjusting
the projector” on page 13) or center the image by adjusting its horizontal or
vertical position (see page 20). Be sure that the projector is at a 90-degree
angle to the screen.
v If the image is out of focus, rotate the focus lens (see “Adjusting the
projector” on page 13.
v If the image appears to shimmer or if it has blurry vertical bars after you
have adjusted the focus, turn Auto Image (see page 19) off and on again to
reset the automatic sync and tracking option. If that does not improve the
image, turn Auto Image off, and adjust the manual sync (see page 20), the
tracking (see page 20), or both.
v If the colors do not display correctly, adjust the brightness (see page 17).
Installation and user’s guide
11
Using the remote control
To control the computer mouse from the projector remote control or keypad,
you must connect the mouse connector on the computer cable to the
computer.
The projector comes with a remote control that has four function buttons, a
disk mouse, and two mouse buttons (one on the top of the remote and one on
the bottom).
Point the remote control at the projection screen or at the front of the
projector. The range for optimum operation is approximately 25 feet. If you
point the remote control at the projection screen, the distance to the screen
and back to the projector must be less than or equal to 25 feet. For best
results, point the remote control directly at the projector.
Note: If the remote control is inactive for several minutes, it “sleeps” to
conserve battery life. Press any button except the disk mouse to
reactivate the remote control.
1Disk mouse
2Right mouse button
3Left mouse button
Press anywhere on the edge of the disk mouse to move the cursor on the
screen. You can move the cursor at any angle by pressing the corresponding
edge of the disk. The mouse button on the top of the remote control simulates
your computer right mouse button; the button on the bottom simulates your
computer left mouse button. See “Using the keypad and remote control
buttons” on page 14 for a description of the four function buttons. If you are
12
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
®
creating presentations in the Microsoft PowerPoint presentation graphics
program, you can use the remote control mouse buttons to navigate through
your presentation while in Slide Show mode. To configure the PowerPoint for
this, click Options from the Tools menu, click the View tab, deselect the
Popup Menu on Right Mouse Click option in the Slide Show section, and
then click OK. Then, when you are in the PowerPoint Slide Show mode, click
the left mouse button to advance to the next slide, and click the right mouse
button to return to the previous slide (other PowerPoint modes are not
affected).
Adjusting the projector
To focus the image, rotate the focus ring 2(see the following illustration)
until the image is clear. To zoom the image, rotate the zoom ring1. This
adjusts the image size without affecting focus.
The projector is equipped with a self-locking, quick-release elevator foot and
button. To raise the projector:
1. Press and hold the elevator button 1(see the following illustration).
2. Raise the projector to the height that you want, and then release the
button to lock the elevator foot 2 into position.
Installation and user’s guide
13
Using the keypad and remote control buttons
While the menus are displayed, the volume, source, and standy buttons on
the keypad act as menu navigation buttons. See “Using the on-screen menus”
on page 16.
Lamp on/off (keypad only)
Press the lamp on/off button to turn the lamp on or off. The Lamp LED
indicates the state of the lamp. When the Lamp LED 1 lights green, you can
turn the lamp on, or the lamp is currently on. An orange LED indicates the
software is initializing or the lamp is cooling. Do not press the lamp on/off
button when the LED is orange.
14
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
Menu
Press the menu button to open the on-screen menus. Press menu again to
close the menus. When you close the menus, the projector saves any changes
that you made. For more information about the on-screen menus, see “Using
the on-screen menus” on page 16.
Source (keypad only) or computer and video (remote control only)
When you have more than one source (computer and video) connected to the
projector, select between them by pressing the source button on the keypad or
the computer or video button on the remote control.
Standby
When you press the standby button, the display and audio turn off and a
blank screen is displayed for 15 minutes. You can change the amount of time
the projector stays in standby mode; see “Standby time” on page 23 for
details.
v If you press the standby button again within 15 minutes, the projector
returns to operation immediately.
v If you press standby again after 15 minutes, there is approximately a
60-second delay before the lamp turns back on.
v If you do not press standby again, the lamp turns off after 15 minutes.
Volume (keypad only)
To increase the volume, press the volume + button. To decrease the volume,
press the volume - button.
Volume adjustments are saved for each source that you have connected.
Installation and user’s guide
15
Using the on-screen menus
The projector has six drop-down menus that you can use to make image
adjustments and change a variety of settings. Most of these adjustments are
not available directly from the keypad.
Note: Some menu items might be unavailable at certain times. This indicates
that the item is not applicable to your setup (for example, video
standards do not apply to computer sources) or the item is not enabled
until another selection is made (for example, Manual Tracking is not
available until Auto Image is turned off).
To open the on-screen menus, press the menu button on the keypad or remote
control. This changes the volume, source, and standby buttons on the keypad
to menu navigation buttons1(see following illustration). Press the buttons to
move the cursor up, down, left, or right, or use the disk mouse on the remote
control. To select a menu, move the cursor left or right to highlight the menu
that you want. The drop-down menu is displayed.
>
Display > A udio
rig tness
C ontrast
int
C olor
S arpness
lan s reen
eset all
Image
C ontrols
L anguage
Status
lue
To change a menu setting, use the source (up) and standby (down) navigation
buttons on the keypad or the disk mouse on the remote control to move the
cursor up and down to the item that you want to change (the selected item is
highlighted), and then use the volume - (left) and volume + (right) navigation
buttons to adjust a setting. Some submenus, such as the Brightness menu,
consist of a slider bar that you use to increase or decrease a value; some
submenus, such as Standby Time menu, consist of options that you scroll
through to select the one that you want. All changes are saved when you
close the menus. To access another menu, use the up and down navigation
buttons or the disk mouse to move back to the top of the current menu, then
use the left and right navigation buttons to move to another menu.
16
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
Display menu
The following settings allow you to adjust the display.
>
Display > A udio
Brightness
C ontrast
Tint
C olor
Sharpness
Blank screen
Reset all
Image
C ontrols
Language
Status
blue
Brightness
Adjusting the brightness changes the intensity of the image.
v Press the left navigation button to darken the image.
v Press the right navigation button to lighten the image.
Contrast
The contrast controls the degree of difference between the lightest and darkest
parts of the picture. Adjusting the contrast changes the amount of black and
white in the image.
v Press the left navigation button to decrease the contrast.
v Press the right navigation button to increase the contrast, making the black
areas appear blacker and the white areas appear whiter.
Tint
The tint adjusts the red-green color balance in the projected image. Changing
the Tint setting has no effect on PAL or SECAM video sources.
v Press the left navigation button to increase the amount of green in the
image.
v Press the right navigation button to increase the amount of red in the
image.
Color
The color setting adjusts a video image from black and white to fully
saturated color.
v Press the left navigation button to decrease the amount of color in the
image.
Installation and user’s guide
17
v Press the right navigation button to increase the amount of color in the
image.
Sharpness
This setting adjusts the sharpness of a video image.
v Press the left navigation button to decrease the sharpness.
v Press the right navigation button to increase the sharpness.
Blank screen
The Blank screen setting determines what color is displayed when there is no
active source and when the projector is in standby. Click the left or right
navigation button to change between blue and black.
Reset all
Click the left or right navigation button to reset all the options (except
Language, Video Standard, Rear Projection, and Standby Time) in all the
menus to their original settings.
Audio menu
The following setting allows you to adjust the audio.
Display
>
A udio > Image
Volume
C ontrols
Language
Status
Volume
Note: Changing the volume using the menu is the same as changing it using
the keypad.
v Press the left navigation button to decrease the volume.
v Press the right navigation button to increase the volume.
Volume adjustments that you make are saved for each source.
18
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
Image menu: The following setting allows you to adjust the imge.
Display
A udio
>
Image > C ontrols
Language
Keystone
Overscan
A uto image
Resize
Manual sync
Manual tracking
Horizontal position
Vertical position
Status
on
on
on
Keystone
Use this option to keep the image square as the angle of projection is
changed. To adjust the keystone, highlight Keystone, and then click the right
navigation button. This option is available for computer sources only in XGA
1024 x 768 resolution only.
Overscan
Use this to crop all the edges of the image to remove noise that is generated
on the edges by your source. This option is available for video sources only.
Note: Some screen savers interfere with the operation of Auto Image. If you
are experiencing problems, try turning your screen saver off, and then
turning Auto Image off and on again.
Auto Image
The projector automatically adjusts tracking, signal synchronization, and
vertical and horizontal position for most computers (Auto Image does not
apply to video sources). If you want to adjust these features manually, you
must turn off AutoImagefirst by highlighting Auto Image in the Image menu
and clicking the left or right navigation button to select off.
Resize
This option works differently for computer and video sources. For computer
sources, the Resize option automatically resizes the image by scaling it up or
down. It affects computer images that are not in the projector native
resolution. When Resize option is on, the projector makes the best fit of the
image to the computer screen. If you turn the Resize option off (by
highlighting it in the Image menu and clicking the left or right navigation
button to select off), the image might be either cropped or too small for the
Installation and user’s guide
19
screen. For video sources, you can use the Resize option to select from among
four different re-sizing options. The default is Standard, which resizes the
image from its original version to fit a standard 4 x 3 aspect ratio screen.
Widescreen Letterbox preserves the 16 x 9 aspect ratio of the original theater
version, but the image is placed in a 4 x 3 space, so black bars are displayed
at the top and bottom of the image. Enhanced Widescreen also preserves the
aspect ratio of the original theater version and is designed to be used with
content that is enhanced for wide-screen TVs. This option yields more detail
than Widescreen Letterbox. Native reduces the Standard size to match the
height of Enhanced Widescreen.
Manual sync
The projector adjusts signal synchronization automatically for most
computers. But if the projected computer image looks fuzzy or streaked, try
turning Auto Image off and then on again. If the image still looks bad, try
adjusting the signal synchronization manually:
1. Turn Auto Image off.
2. Highlight Manual sync, and then press the left or right navigation button
repeatedly until the image is sharp and free of streaks.
Manual tracking
The projector adjusts tracking automatically to match the video signal from
your computer. However, if the image has evenly spaced, fuzzy, vertical lines
or if the projected image is too wide or too narrow for the screen, try turning
Auto Image off and on again. If the image is still bad, try adjusting the
tracking manually:
Note: The Manual sync, Manual tracking, Horizontal position and Vertical
position options are available only for computer sources. The projector
sets these options automatically for video sources.
1. Turn Auto Image off.
2. Highlight Manual tracking, and then press the left or right navigation
button repeatedly until the fuzzy vertical bars are gone.
Horizontal position
Follow these steps to manually adjust the horizontal position:
20
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
1. Turn Auto Image off.
2. Highlight Horizontal position, and then press the left navigation button to
move the image right, or press the right navigation button to move the
image left.
Vertical position
Follow these steps to manually adjust the vertical position:
1. Turn Auto Image off.
2. Highlight Vertical position, and then press the left navigation button to
move the image down, or press the right navigation button to move the
image up.
Positioning adjustments are saved when you turn off the projector.
Installation and user’s guide
21
Controls menu
The following settings allow you to adjust the controls.
Video standard
When Video standard is set to Auto, the projector attempts to select the video
standard (NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, PAL-60, or SECAM)
automatically based on the input signal that it receives. (The video standard
options might vary depending on your region of the world.) The input signal
for SECAM video is similar to other video signals and cannot be
automatically detected; therefore, SECAM must be selected manually. If the
projector is unable to detect the correct standard, the colors might not be
displayed correctly or the image might appear broken. If this happens,
manually select a standard by clicking the left or right navigation button and
cycling through the standards.
Note: If you already know the video standard that is used in your
geographical area, it is often best to manually select it.
22
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
Standby time
Use this option to select how long the lamp stays on and the blank screen is
displayed when the projector enters standby mode before the projector turns
off. Select among instant, 1, 5, 10, 15, and 30 minutes, and 1 and 2 hours by
clicking the left or right navigation button and cycling through the options.
Rear projection
When you turn Rear Projection on, the projector reverses the image so that
you can project from behind a translucent screen. Highlight Rear Projection,
and then click the left or right navigation button to turn this feature on and
off.
Default source
Use the Default source option to select among Computer analog, Computer
digital, and Video. This determines which source the projector checks first for
active video during power-on. Highlight Default source, and click the left or
right navigation button to select among the options.
Auto source select
Use this setting to select between On and Off. When this feature is off, the
projector defaults to the source that is selected in Default source. To display
another source, you must manually select one by pressing the source button
on the keypad or the computer or video button on the remote control. When
this feature is on, the projector automatically finds the active source, checking
the default source first. Highlight Auto source select and click the left or right
navigation button to turn this feature on and off.
Plug and Play
Use this setting to select between On and Off. When it is on, most new
computers will automatically recognize the projector and then set the monitor
resolution and refresh rate accordingly. You need to set the Plug and Play
setting to Off for the projector to properly display images from some older
computers. The Plug and Play setting does not affect video images.
If the projector display constantly changes between the computer image and
the message, “Perfecting the image,” you might need to turn Plug and Play
off.
Installation and user’s guide
23
Display messages
Use this setting to select between On and Off. When this feature is on, status
messages such as “No signal detected” or “Standby Active” are displayed in
the lower-right corner of the screen. Click the left or right navigation button
to turn this feature off and suppress status messages.
Display startup screen
Use this setting to select between On and Off. When this feature is on, the
startup screen is displayed when the projector starts, and remains until an
active source is detected. The startup screen contains projector support contact
information. Click the left or right navigation button to turn this feature off
and display a plain black or blue screen instead of the startup screen.
Language menu
The following settings allow you to adjust the language.
You can display the on-screen menus in English, French, German, Spanish,
Chinese, or Japanese. Move the cursor to the language that you want and
then click the left or right navigation button. The menus are redisplayed.
24
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
Status menu
This is a read-only window for informational purposes.
To display the status window, click Show status from the menu, and then
click the left or right navigation button. To close the window, click the left or
right navigation button.
Display
A udio
Image
C ontrols
Language
Status
>
Show status
0039
1024x768
60.03 KHz
75.04 Hz
off
computer-analog
1.0
1.0
1.0
Lamp hours used
C omputer resolution
Horizontal refresh rate
Vertical refresh rate
Mute status
Source
Software version
Startup screen version
Boot version
Lamp hours used
This shows how many hours the current lamp has been in use. The counter
starts at zero hours and counts each hour the lamp is in use. Change the bulb
when the brightness is no longer acceptable. See “Replacing the projection
lamp” on page 27 for details.
Computer resolution
This shows your computer resolution setting. To change this, go to your
computer Control Panel and adjust the resolution in the Display tab. See your
computer documentation for details.
Horizontal refresh rate
This shows the time period that one horizontal line is displayed.
Vertical refresh rate
The time period that one video frame is displayed.
Mute status
This shows whether the audio is muted.
Installation and user’s guide
25
Source
This indicates the active source, (Computer analog, Computer digital, or
Video).
Software version
This indicates the projector software version. This information is useful when
you need to call an IBM technical support representative.
Startup screen version
This indicates the projector startup screen version. This information is useful
when you need to call an IBM technical support representative.
Boot version
This indicates the projector startup software version. This information is
useful when you need to call an IBM technical support representative.
26
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
Maintenance and troubleshooting
This section describes how to:
v Clean the lens
v Replace the projection lamp
v Replace the batteries in the remote
v Use the security lock feature
v Troubleshoot the projector
Cleaning the lens
Follow these steps to clean the projection lens:
1. Apply a non-abrasive camera lens cleaner to a soft, dry cloth.
v Avoid using an excessive amount of cleaner.
v Abrasive cleaners, solvents or other harsh chemicals might scratch the
lens.
2. Lightly wipe the cleaning cloth over the lens in a circular motion.
3. If you do not intend to use the projector immediately, replace the lens cap.
CAUTION:
The following label indicates a hot surface nearby.
Replacing the projection lamp
WARNING:
To avoid burns, allow the projector to cool for at least 30 minutes before
you open the lamp-module door. Never remove the lamp module while
the lamp is operating.
The lamp-hour counter in the Status menu counts the number of hours the
lamp has been in use. Replace the lamp when the brightness is no longer
acceptable. You can order new lamp modules from your dealer.
Installation and user’s guide
27
Follow these steps to replace the projection lamp:
1. Turn off the projector by unplugging the power cord.
2. Wait 30 minutes to allow the projector to cool thoroughly.
3. Invert the projector on a soft, flat surface, and then insert a small
screwdriver or other flat object into the tab on the lamp-module door.
4. Pull the lamp-module door up and remove it.
WARNING:
Be extremely careful when removing the lamp module. In the
unlikely event that the bulb ruptures, small glass fragments might
be generated. The lamp module is designed to contain these
fragments, but use caution when removing the lamp module.
Attention: This product contains a Metal Arc Lamp which contains
Mercury. Dispose of it as required by local ordinances and regulations.
28
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
5. Loosen the two nonremovable screws on the outside of the module.
WARNING:
Never operate with the lamp door open or removed. This disrupts
the air flow and causes the projector to overheat.
6. Grasp and lift the pull tab 1and lift the module out. Dispose of the
lamp module in an environmentally proper manner.
Attention:
Do not drop the lamp module or touch the glass bulb. The glass might
shatter and cause injury.
Installation and user’s guide
29
Install the new lamp module, being sure to align the connectors properly.
Push the module in until it is flush with the bottom case of the projector.
Tighten the screws on the outside of the module.
Replace the lamp-module door by inserting the hooks on the rear of the
lamp-module door into the projector and pressing the lamp-module door
into place. If the lamp-module door does not fit properly or bulges out,
remove the door and reseat the lamp module.
11. Plug in the power cord to turn the projector back on.
7.
8.
9.
10.
12. To reset the lamp-hour counter in the Status window, press and hold the
volume - button, then press the menu button (while still holding down
the volume - button) for 5 seconds. Verify that the counter was reset by
pressing the menu button and viewing the counter in the Status window.
Replacing the batteries in the remote control
The life of the batteries depends on how often and how long you use the
remote control. Symptoms of low battery charge include erratic responses
when you use the remote control and a reduced range of operation.
Follow these steps to replace the batteries:
1. Turn the remote control face down in your hand.
2. Slide the battery cover off the end of the remote control.
3. Remove the old batteries and dispose of them in an environmentally
proper manner.
4. Install two new AAA alkaline batteries. Make sure that you install each in
the correct direction.
5. Slide the battery cover back on to the remote control.
30
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
Using the security lock
The projector has a security connector for use with a computer lock system.
Go to http://www.compu-lock.com for ordering information. Refer to the
information that comes with the lock for instructions on how to secure it to
the projector.
Troubleshooting
Problem: There is nothing on the projection screen.
v Make sure that the power cord is properly connected to a fully functional
ac electrical outlet. Make sure that the power cord is also properly
connected to the projector.
v If the projector is plugged into a power strip, make sure that the power
strip is turned on.
v Make sure that you have removed the lens cap on the projection lens at the
front of the projector.
v Make sure that the lamp is turned on.
v Check the projector lamp to ensure that it is securely connected in the lamp
module. See “Replacing the projection lamp” on page 27.
v Make sure that the cables do not have any bent pins.
Problem: The color or text not being projected.
v You might need to adjust the brightness up or down until the text is visible.
See “Brightness” on page 17 for more information.
Problem: The screen resolution is not correct.
v Make sure that the computer video adapter is set for a resolution of no
greater than 1024 x 768.
Problem: The image is not centered on the screen.
v Move the projector to reposition the image.
Installation and user’s guide
31
v Reposition the image using the software. See “Horizontal position” and
“Vertical position” on page 20.
v Be sure that the projector is at a 90-degree angle to the screen.
Problem: Only the start-up screen is displayed.
v Verify that the cables are connected correctly.
v Verify that the proper input source is connected. See “Source (keypad only)
or computer and video (remote control only)” on page 15.
v Turn off all the equipment and turn on the equipment again in the proper
order. Refer to your computer documentation to determine the correct
order.
v Make sure that your mobile computer’s external video port is turned on.
See “Portable and mobile computer activation” in Appendix B. or your
computer manual for details.
v Make sure that your computer video board is installed and configured
correctly.
v Make sure that your computer has a compatible video board. The projector
is not CGA, EGA, or SXGA compatible.
If you are using Windows 98:
1. From the desktop, double-click My Computer, double-click Control Panel,
and double-click Display.
2. Click the Settings tab.
3. Verify that the desktop area is set to 1024 x 768 or less.
Problem: The image is too wide or narrow for the screen.
v Adjust the zoom or the projector placement.
v Adjust the resolution of your video adapter if it’s greater than 1024 x 768.
Problem: The image is out of focus.
v Turn the projection lens to focus the image.
v Make sure that the projection screen is at least 5 feet (1.5 m) from the
projector.
v Check the projection lens to see if it needs cleaning.
Problem: The image and menus are reversed left to right.
v Rear projection mode is probably turned on. Turn off Rear Projection in the
Controls menu. The image immediately returns to forward projection. See
“Rear projection” on page 23.
Problem: The projector displays vertical lines, “bleeding,” or spots.
v Adjust the brightness. See “Brightness” on page 17.
32
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
v Check the projection lens to see if it needs cleaning.
Problem: There is no sound.
v Adjust the volume.
v Verify the audio/input connections.
v Adjust the audio source.
Problem: The image is “noisy” or streaked.
Try these steps in this order:
1. Deactivate the screen saver on your computer.
2. Turn Auto Image off, and then on again. See “Auto image” on page 19.
3. Turn Auto Image off, and adjust the synchronization and tracking
manually to find an optimal setting. See “Manual sync” and “Manual
tracking” on page 20.
v The problem might be with your computer video adapter. If possible,
connect the projector to a different computer.
Problem: The projected colors do not match the computer or video player
colors.
v Just as there are differences in the displays of different monitors, there are
often differences between the computer image and the projected image.
Adjust the brightness, tint, or contrast from the Display menu. See
“Brightness,” “Tint,” and “Contrast” on page 17.
Problem: The lamp seems to be getting dimmer.
v The lamp begins to lose brightness when it has been in use for a long time.
Replace the lamp as described in “Replacing the projection lamp” on
page 27.
Problem: The lamp shuts off.
v A minor power surge might cause the lamp to shut off. Unplug the
projector, wait at least one minute, and then plug it back in.
v Make sure that the vents are not blocked.
Installation and user’s guide
33
34
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
Appendix A. Product specifications
Specifications
The iL2215 projector must be operated and stored within the temperature and
humidity ranges specified.
Temperature
Operating
Non-operating
10 to 40° C (50 to 104° F)
-20 to 70° C- (4 to 158°F)
Humidity
Operating and non-operating.
5% to 95% relative humidity, non-condensing
Dimensions
22.2 x 24.8 x 6.4 cm (8.75 x 9.75 x 2.5 inches)
Weight
2.2 kg (4.8 lbs.) unpacked
Altitude
Operating
Non-operating
0 to 3048 meters (10000 feet)
0 to 12192 meters (40,000 feet)
Optics
Focus range
1.5 to 5 m (4.9 to16 feet)
Lamp
Type
120-watt VHP lamp
Input power requirements
100-120 V ac, 6A; 50/60Hz
200-240 V ac 3A; 50Hz
Audio input
Input impedance
Maximum Input Voltage
Sensitivity
© Copyright IBM Corp. 2000
10K ohm nominal, ac coupled
(LIN + RIN)PEAK < 4.5 V for THD ≤ 0.3%
LIN or RIN < 2.0 Vrms for THD ≤ 0.3%
100 mV at 1 kHz for 88 dB SPL at 1 meter
35
Connector type
3.5 mm (.125 inch) stereo phone mini
Accessories
There are many accessories available for your new projector and new ones
being added frequently. Please refer to http://www.infocus.com/ and select
from the many accessories listed there for purchase.
36
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
Appendix B. Portable and mobile computer activation
Many mobile computers do not automatically turn on their external video
port when a projector is connected. Activation commands for some mobile
computers are listed in the following table. (If your computer is not listed or
the given command does not work, refer to the computer documentation for
the appropriate command.) On many mobile computers, the activation
function key is labeled with an icon such as that in the following illustration.
Note: Visit http://www.infocus.com/ for the most current activation chart. It
is located in the Service and Support link.
Note: Usually, pressing the key commands once activates the external video
port, pressing it again activates both external and internal ports, and
pressing it a third time activates the internal port. Refer to your
computer’s documentation for details on your specific model.
Computer
Key command to
activate port
Ctrl+Alt+Esc (for setup)
Key command to
deactivate port
Ctrl+Alt+Esc (for setup)
AST* **
FN+D or Ctrl+D
Ctrl+FN+D
FN+F5
type from A:\IVGA\CRT
FN+F12
FN+D or Ctrl+D
Ctrl+FN+D
FN+F5
type from A:\IVGACRT
FN+F12
AMS
FN+F2
FN+F2
AMT
setup screen
setup screen
AT&T
FN+F3 FN+F6
FN+F3 F+-F6
Advanced Logic Research
Ctrl+Alt+V
Ctrl+Alt+V
Altima
Shift-Ctrl-Alt-C
Shift-Ctrl-Alt-L
setup VGA/Conf.Simulscan setup VGA/Conf.Simulscan
Ambra**
FN-F12
FN-F5
F2/Choose Option/F5
FN-F12
FN-F5
F2/Choose Option/F5
Amrel* **
setup menu
Shift-Ctrl-D
setup menu
Shift-Ctrl-D
Acer
© Copyright IBM Corp. 2000
37
Computer
Apple
Key command to
Key command to
activate port
deactivate port
see Mac Portable and Mac PowerBook
Aspen
automatic
automatic
Award
FN-F6
FN-F6
BCC*
automatic
reboot computer
Bondwell
LCD or CRT options after
bootup
reboot for LCD or CRT
options to appear
Chaplet**
setup screen
FN-F6
FN-F4
setup screen
FN-F6
FN-F4
Chembook
FN-F6
FN-F6
Commax
Ctrl-Alt-#6
Ctrl-Alt-#5
Compaq* **
Ctrl-Alt-<
FN-F4
automatic
mode/? (for setup option)
Ctrl-Alt->
FN-F4
automatic
mode/? (for setup option)
Compuadd* **
automatic
Alt-F for screen setup
option
automatic
Alt-F for screen setup
option
Data General
Ctrl-Alt-Command
Ctrl-Alt-Command
Data General Walkabout
2 CRT/X at DOS prompt
restart
Datavue
Ctrl-Shift-M
Ctrl-Shift-M
DEC**
FN-F5
FN-F4
Ctrl-Alt-<
Ctrl-Alt-F10
FN-F8 (CRT/LCD)
FN-D
FN-F12
FN-F5
FN-F4
Ctrl-Alt->
Ctrl-Alt-F10
FN-F8
FN-D
FN-F12
Digital*
automatic
FN-F2
reboot
FN-F2
Dolch
dip switch to CRT
dip switch to LCD
Epson
dip switch to CRT
dip switch to LCD
Everex*
setup screen option
setup screen option
For-A
Ctrl-Alt-Shift-C
Ctrl-Shift-Alt-L
Dell**
38
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
Computer
Key command to
activate port
FN-F10
Key command to
deactivate port
Gateway
FN-F3 FN-F1/FN-F1 again
simultaneous
FN-F3 FN-F1
Grid* **
FN-F2, select auto or
simultaneous
Ctrl-Alt-Tab
FN-F2
Hitachi
FN-F7
FN-F7
Honeywell
FN-F10
FN-F10
Hyundai
setup screen option
setup screen option
IBM 970*
automatic
warm restart
IBM ThinkPad**
reboot, enter setup menu
FN-F2
Fujitsu
Ctrl-Alt-Tab
FN-F7, select choice from
setup menu
FN-F1, select choice
FN-F5, select choice
PS/2 SC select choice (such
as CRT, LCD)
Infotel
FN-F12
FN-F12
Kaypro
start up, monitor plugged
in
unplug monitor
Kris Tech
FN-F8
FN-F8
Leading Edge
FN-T
FN-T
Mac Portable 100
no video port; not compatible
Mac PowerBook
140, 145, 150, 170
no video port; requires a third-party interface
warm restart
160, 165, 180, 520, 540, 5300 Control Panel folder,
PowerBook Display folder;
Activate Video Mirroring
210, 230, 250, 270, 280, 2300 requires Apple Docking Station or Mini Dock
Magitronic
FN-F4
FN-F4
Mastersport
FN-F2
FN-F1
Micro Express*
automatic
warm restart
Micron
FN-F2
FN-F2
Microslate*
automatic
warm restart
Appendix B. Portable and mobile computer activation
39
Computer
Mitsubishi
Key command to
activate port
SW2 On-Off-Off-Off
Key command to
deactivate port
SW2 Off-On-On-On
NCR
setup screen option
setup screen option
NEC* **
setup screen option
CRT at the DOS prompt
FN-F3
setup screen option
LCD at the DOS prompt
FN-F3
Olivetti*
automatic
automatic
FN-O/*
FN-O/*
FN-F0
FN-F0
Ctrl-Alt-<
Ctrl-Alt->
Panasonic
FN-F2
FN-F2
Prostar
Ctrl-Alt-S at startup
Ctrl-Alt-S at startup
Samsung*
setup screen option
setup screen option
Sanyo
setup screen option
setup screen option
Sharp
dip switch to CRT
dip switch to LCD
Sun SPARC-Dataview
Ctrl-Shift-M
Ctrl-Shift-M
Tandy**
Ctrl-Alt-Insert
setup screen option
Ctrl-Alt-Insert
setup screen option
Tangent
FN-F5
FN-F5
Texas Instruments*
setup screen option
setup screen option
Top-Link* **
setup screen option
FN-F6
setup screen option
FN-F6
Toshiba* **
Ctrl-Alt-End
FN-End
FN-F5
setup screen option
Ctrl-Alt-Home
FN-Home
FN-F5
setup screen option
Twinhead*
FN-F7
FN-F5
automatic
FN-F7
FN-F5
automatic
WinBook
Ctrl-Alt-F10
Ctrl-Alt-F10
Wyse
software driven
software driven
Zenith**
FN-F10
FN-F2
FN-F10
FN-F2
Packard Bell* **
40
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
Computer
Zeos **
Key command to
activate port
FN-F1
Ctrl-Shift-D
FN-F1
Key command to
deactivate port
FN-F1
Ctrl-Shift-D
FN-F1
* These manufacturers have models that automatically send video to the
external video port when some type of display device is attached.
** These manufacturers offer more than one key command depending on the
computer model.
Appendix B. Portable and mobile computer activation
41
42
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
Appendix C. Using video mirroring
Using video mirroring with a PowerBook computer
When you turn on video mirroring (called SimulScan in newer PowerBook
computers), the projector displays the same information that appears on a
PowerBook built-in screen. When video mirroring is off, the projector operates
like a separate display.
To turn on video mirroring for the first time:
1. Open the Monitors control panel; click Monitor 2.
2. Set the number of colors that you want.
3. Open the Control Strip, and then click the monitor icon.
4. Select Turn Video Mirroring On.
Now you can turn video mirroring on and off from the Control Strip without
having to open the monitor control panel again. When using video mirroring
and high-color graphics such as slide shows, the projected image occasionally
might turn black and white. If this happens, perform the following steps:
1. Turn off video mirroring.
2. Open the monitor control panel.
3. Move the white menu bar to Monitor 2 to set the projector as the primary
monitor.
4. Restart the PowerBook computer.
Using Simulscan
Some newer PowerBook computers display images on an external monitor or
projector differently than previous ones. When using SimulScan, the projector
displays the same information that appears on your PowerBook computer. To
select SimulScan:
1. Open the Control Panel, and then double-click Monitors and Sound.
2. In the Resolution list, select the SimulScan mode, and then click OK.
3. If this changes your display settings, a window opens. Click OK to
confirm the change.
© Copyright IBM Corp. 2000
43
44
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
Appendix D. Projected image size
Use the following graph and tables to help you determine projected image
sizes.
Table 1. Image size, width and height-maximum image size
Distance to Screen
(feet)
Diagonal (feet)
Width (feet)
Height (feet)
4.9
3.2
2.6
1.9
8
5.2
4.2
3.1
12
7.8
6.3
4.7
16
10.4
8.3
6.3
20
13.0
10.4
7.8
30
19.5
15.6
11.7
© Copyright IBM Corp. 2000
45
Table 2. Image Size, Width and Height-minimum image size
Distance to Screen
(feet)
Diagonal (feet)
Width (feet)
Height (feet)
4.9
2.5
2.0
1.5
8
4.1
3.3
2.5
12
6.2
4.9
3.7
16
8.2
6.6
4.9
20
10.3
8.2
6.2
30
15.4
12.3
9.2
46
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
Appendix E. Help and service information
This section contains information on how to obtain online and telephone
technical support.
Online technical support
Online technical support is available during the life of your product. Online
assistance can be obtained through the Personal Computing Support Web site
and the IBM Automated Fax System.
Online technical support
IBM Personal Computing Support Web site http://www.ibm.com/pc/support
IBM Automated Fax System
1-800-426-3395 (U.S. and Canada)
During the warranty period, assistance for replacement or exchange of
defective components is available. In addition, if your IBM option is installed
in an IBM computer, you might be entitled to service at your location. Your
technical support representative can help you determine the best alternative.
Telephone technical support
Installation and configuration support through the HelpCenter will be
withdrawn or made available for a fee, at IBM’s discretion, 90 days after the
option has been withdrawn from marketing. Additional support offerings,
including step-by-step installation assistance, are available for a nominal fee.
To assist the technical support representative, have available as much of the
following information as possible:
v Option name
v Option number
v Proof of purchase
v Computer manufacturer, model, serial number (if IBM), and manual
v Exact wording of the error message (if any)
v Description of the problem
v Hardware and software configuration information for your system
If possible, be at your computer. Your technical support representative might
want to walk you through the problem during the call.
© Copyright IBM Corp. 2000
47
For the support telephone number and support hours by country, refer to the
following table or to the enclosed technical support insert. Support phone
numbers are also available by clicking HelpCenter phone list on the IBM
support Web page at
http://www.ibm.com/pc/support
If the number is not provided, contact your IBM reseller or IBM marketing
representative. Response time may vary depending on the number and nature
of the calls received.
Support 24 hours a day, 7 days a week
48
Canada (Toronto only)
416-383-3344
Canada (all other)
1-800-565-3344
U.S.A. and Puerto Rico
1-800-772-2227
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
Appendix F. Product warranties and notices
Warranty Statements
The warranty statements consist of two parts: Part 1 and Part 2. Part 1 varies
by country. Part 2 is the same for both statements. Be sure to read both the
Part 1 that applies to your country and Part 2.
v United States, Puerto Rico, and Canada (Z125-4753-05 11/97) (see “IBM
Statement of Limited Warranty for United States, Puerto Rico, and Canada
(Part 1 - General Terms)”)
v Worldwide except Canada, Puerto Rico, Turkey, and United States
(Z125-5697-01 11/97) (see “IBM Statement of Warranty Worldwide except
Canada, Puerto Rico, Turkey, United States (Part 1 - General Terms)” on
page 53)
v Worldwide Country-Unique Terms (see “Part 2 - Worldwide
Country-Unique Terms” on page 56)
IBM Statement of Limited Warranty for United States, Puerto Rico, and Canada
(Part 1 - General Terms)
This Statement of Warranty includes Part 1 - General Terms and Part 2 Country-unique Terms.The terms of Part 2 may replace or modify those of Part
1.The warranties provided by IBM in this Statement of Warranty apply only to
Machines you purchase for your use, and not for resale, from IBM or your reseller.
The term ″Machine″ means an IBM machine, its features, conversions, upgrades,
elements, or accessories, or any combination of them. The term ″Machine″ does not
include any software programs, whether pre-loaded with the Machine, installed
subsequently or otherwise. Unless IBM specifies otherwise, the following warranties
apply only in the country where you acquire the Machine. Nothing in this Statement
of Warranty affects any statutory rights of consumers that cannot be waived or
limited by contract. If you have any questions, contact IBM or your reseller.
Machine - IBM Data/Video Projector iL2215
Warranty period* - Three years
* Contact your place of purchase for warranty service information. Some IBM Machines are
eligible for on-site warranty service depending on the country where service is performed.
The IBM Warranty for Machines
IBM warrants that each Machine 1) is free from defects in materials and
workmanship and 2) conforms to IBM’s Official Published Specifications. The
warranty period for a Machine is a specified, fixed period commencing on its
© Copyright IBM Corp. 2000
49
Date of Installation. The date on your sales receipt is the Date of Installation,
unless IBM or your reseller informs you otherwise.
During the warranty period IBM or your reseller, if approved by IBM to
provide warranty service, will provide repair and exchange service for the
Machine, without charge, under the type of service designated for the
Machine and will manage and install engineering changes that apply to the
Machine.
If a Machine does not function as warranted during the warranty period, and
IBM or your reseller are unable to either 1) make it do so or 2) replace it with
one that is at least functionally equivalent, you may return it to your place of
purchase and your money will be refunded. The replacement may not be new,
but will be in good working order.
Extent of Warranty
The warranty does not cover the repair or exchange of a Machine resulting
from misuse, accident, modification, unsuitable physical or operating
environment, improper maintenance by you, or failure caused by a product
for which IBM is not responsible. The warranty is voided by removal or
alteration of Machine or parts identification labels.
THESE WARRANTIES ARE YOUR EXCLUSIVE WARRANTIES AND
REPLACE ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. THESE WARRANTIES GIVE
YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER
RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION.
SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF EXPRESS OR IMPLIED WARRANTIES, SO THE ABOVE
EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU. IN THAT
EVENT, SUCH WARRANTIES ARE LIMITED IN DURATION TO THE
WARRANTY PERIOD. NO WARRANTIES APPLY AFTER THAT PERIOD.
Items Not Covered by Warranty
IBM does not warrant uninterrupted or error-free operation of a Machine.
Unless specified otherwise, IBM provides non-IBM machines WITHOUT
WARRANTIES OF ANY KIND.
50
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
Any technical or other support provided for a Machine under warranty, such
as assistance via telephone with “how-to” questions and those regarding
Machine set-up and installation, will be provided WITHOUT WARRANTIES
OF ANY KIND.
Warranty Service
To obtain warranty service for the Machine, contact your reseller or IBM. In
the United States, call IBM at 1-800-772-2227. In Canada, call IBM at
1-800-565-3344. (In Toronto, call 416-383-3344.) You may be required to present
proof of purchase.
IBM or your reseller provides certain types of repair and exchange service,
either at your location or at a service center, to keep Machines in, or restore
them to, conformance with their Specifications. IBM or your reseller will
inform you of the available types of service for a Machine based on its
country of installation. IBM may repair the failing Machine or exchange it at
its discretion.
When warranty service involves the exchange of a Machine or part, the item
IBM or your reseller replaces becomes its property and the replacement
becomes yours. You represent that all removed items are genuine and
unaltered. The replacement may not be new, but will be in good working
order and at least functionally equivalent to the item replaced. The
replacement assumes the warranty service status of the replaced item.
Any feature, conversion, or upgrade IBM or your reseller services must be
installed on a Machine which is 1) for certain Machines, the designated,
serial-numbered Machine and 2) at an engineering-change level compatible
with the feature, conversion, or upgrade. Many features, conversions, or
upgrades involve the removal of parts and their return to IBM. A part that
replaces a removed part will assume the warranty service status of the
removed part.
Before IBM or your reseller exchanges a Machine or part, you agree to remove
all features, parts, options, alterations, and attachments not under warranty
service.
You also agree to
1. ensure that the Machine is free of any legal obligations or restrictions that
prevent its exchange;
2. obtain authorization from the owner to have IBM or your reseller service a
Machine that you do not own; and
3. where applicable, before service is provided
a. follow the problem determination, problem analysis, and service
request procedures that IBM or your reseller provides,
Appendix F. Product warranties and notices
51
b. secure all programs, data, and funds contained in a Machine,
c. provide IBM or your reseller with sufficient, free, and safe access to
your facilities to permit them to fulfill their obligations, and
d. inform IBM or your reseller of changes in a Machine’s location.
IBM is responsible for loss of, or damage to, your Machine while it is 1) in
IBM’s possession or 2) in transit in those cases where IBM is responsible for
the transportation charges.
Neither IBM nor your reseller is responsible for any of your confidential,
proprietary or personal information contained in a Machine which you return
to IBM or your reseller for any reason. You should remove all such
information from the Machine prior to its return.
Production Status
Each IBM Machine is manufactured from new parts, or new and used parts.
In some cases, the Machine may not be new and may have been previously
installed. Regardless of the Machine’s production status, IBM’s appropriate
warranty terms apply.
Limitation of Liability
Circumstances may arise where, because of a default on IBM’s part or other
liability, you are entitled to recover damages from IBM. In each such instance,
regardless of the basis on which you are entitled to claim damages from IBM
(including fundamental breach, negligence, misrepresentation, or other
contract or tort claim), IBM is liable for no more than
1. damages for bodily injury (including death) and damage to real property
and tangible personal property; and
2. the amount of any other actual direct damages, up to the greater of U.S.
$100,000 (or equivalent in local currency) or the charges (if recurring, 12
months’ charges apply) for the Machine that is the subject of the claim.
This limit also applies to IBM’s suppliers and your reseller. It is the
maximum for which IBM, its suppliers, and your reseller are collectively
responsible.
UNDER NO CIRCUMSTANCES IS IBM LIABLE FOR ANY OF THE
FOLLOWING: 1) THIRD-PARTY CLAIMS AGAINST YOU FOR
DAMAGES (OTHER THAN THOSE UNDER THE FIRST ITEM LISTED
ABOVE); 2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR
3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY
ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST
PROFITS OR SAVINGS), EVEN IF IBM, ITS SUPPLIERS OR YOUR
RESELLER IS INFORMED OF THEIR POSSIBILITY. SOME
52
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
IBM Statement of Warranty Worldwide except Canada, Puerto Rico, Turkey,
United States (Part 1 - General Terms)
This Statement of Warranty includes Part 1 - General Terms and Part 2 Country-unique Terms.The terms of Part 2 may replace or modify those of Part
1. The warranties provided by IBM in this Statement of Warranty apply only to
Machines you purchase for your use, and not for resale, from IBM or your reseller.
The term ″Machine″ means an IBM machine, its features, conversions, upgrades,
elements, or accessories, or any combination of them. The term ″Machine″ does not
include any software programs, whether pre-loaded with the Machine, installed
subsequently or otherwise. Unless IBM specifies otherwise, the following warranties
apply only in the country where you acquire the Machine. Nothing in this Statement
of Warranty affects any statutory rights of consumers that cannot be waived or
limited by contract. If you have any questions, contact IBM or your reseller.
Machine - IBM Data/Video Projector iL2215
Warranty period* - Three years
* Contact your place of purchase for warranty service information. Some IBM Machines are
eligible for on-site warranty service depending on the country where service is performed.
The IBM Warranty for Machines
IBM warrants that each Machine 1) is free from defects in materials and
workmanship and 2) conforms to IBM’s Official Published Specifications. The
warranty period for a Machine is a specified, fixed period commencing on its
Date of Installation. The date on your sales receipt is the Date of Installation,
unless IBM or your reseller informs you otherwise.
During the warranty period IBM or your reseller, if approved by IBM to
provide warranty service, will provide repair and exchange service for the
Machine, without charge, under the type of service designated for the
Machine and will manage and install engineering changes that apply to the
Machine.
If a Machine does not function as warranted during the warranty period, and
IBM or your reseller are unable to either 1) make it do so or 2) replace it with
one that is at least functionally equivalent, you may return it to your place of
purchase and your money will be refunded. The replacement may not be new,
but will be in good working order.
Extent of Warranty
Appendix F. Product warranties and notices
53
The warranty does not cover the repair or exchange of a Machine resulting
from misuse, accident, modification, unsuitable physical or operating
environment, improper maintenance by you, or failure caused by a product
for which IBM is not responsible. The warranty is voided by removal or
alteration of Machine or parts identification labels.
THESE WARRANTIES ARE YOUR EXCLUSIVE WARRANTIES AND
REPLACE ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. THESE WARRANTIES GIVE
YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER
RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION.
SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF EXPRESS OR IMPLIED WARRANTIES, SO THE ABOVE
EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU. IN THAT
EVENT, SUCH WARRANTIES ARE LIMITED IN DURATION TO THE
WARRANTY PERIOD. NO WARRANTIES APPLY AFTER THAT PERIOD.
Items Not Covered by Warranty
IBM does not warrant uninterrupted or error-free operation of a Machine.
Unless specified otherwise, IBM provides non-IBM machines WITHOUT
WARRANTIES OF ANY KIND.
Any technical or other support provided for a Machine under warranty, such
as assistance via telephone with “how-to” questions and those regarding
Machine set-up and installation, will be provided WITHOUT WARRANTIES
OF ANY KIND.
Warranty Service
To obtain warranty service for the Machine, contact your reseller or IBM. You
may be required to present proof of purchase.
IBM or your reseller provides certain types of repair and exchange service,
either at your location or at a service center, to keep Machines in, or restore
them to, conformance with their Specifications. IBM or your reseller will
inform you of the available types of service for a Machine based on its
country of installation. IBM may repair the failing Machine or exchange it at
its discretion.
When warranty service involves the exchange of a Machine or part, the item
IBM or your reseller replaces becomes its property and the replacement
becomes yours. You represent that all removed items are genuine and
54
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
unaltered. The replacement may not be new, but will be in good working
order and at least functionally equivalent to the item replaced. The
replacement assumes the warranty service status of the replaced item.
Any feature, conversion, or upgrade IBM or your reseller services must be
installed on a Machine which is 1) for certain Machines, the designated,
serial-numbered Machine and 2) at an engineering-change level compatible
with the feature, conversion, or upgrade. Many features, conversions, or
upgrades involve the removal of parts and their return to IBM. A part that
replaces a removed part will assume the warranty service status of the
removed part.
Before IBM or your reseller exchanges a Machine or part, you agree to remove
all features, parts, options, alterations, and attachments not under warranty
service.
You also agree to
1. ensure that the Machine is free of any legal obligations or restrictions that
prevent its exchange;
2. obtain authorization from the owner to have IBM or your reseller service a
Machine that you do not own; and
3. where applicable, before service is provided
a. follow the problem determination, problem analysis, and service
request procedures that IBM or your reseller provides,
b. secure all programs, data, and funds contained in a Machine,
c. provide IBM or your reseller with sufficient, free, and safe access to
your facilities to permit them to fulfill their obligations, and
d. inform IBM or your reseller of changes in a Machine’s location.
IBM is responsible for loss of, or damage to, your Machine while it is 1) in
IBM’s possession or 2) in transit in those cases where IBM is responsible for
the transportation charges.
Neither IBM nor your reseller is responsible for any of your confidential,
proprietary or personal information contained in a Machine which you return
to IBM or your reseller for any reason. You should remove all such
information from the Machine prior to its return.
Production Status
Each IBM Machine is manufactured from new parts, or new and used parts.
In some cases, the Machine may not be new and may have been previously
installed. Regardless of the Machine’s production status, IBM’s appropriate
warranty terms apply.
Limitation of Liability
Appendix F. Product warranties and notices
55
Circumstances may arise where, because of a default on IBM’s part or other
liability, you are entitled to recover damages from IBM. In each such instance,
regardless of the basis on which you are entitled to claim damages from IBM
(including fundamental breach, negligence, misrepresentation, or other
contract or tort claim), IBM is liable for no more than
1. damages for bodily injury (including death) and damage to real property
and tangible personal property; and
2. the amount of any other actual direct damages, up to the greater of U.S.
$100,000 (or equivalent in local currency) or the charges (if recurring, 12
months’ charges apply) for the Machine that is the subject of the claim.
This limit also applies to IBM’s suppliers and your reseller. It is the
maximum for which IBM, its suppliers, and your reseller are collectively
responsible.
UNDER NO CIRCUMSTANCES IS IBM LIABLE FOR ANY OF THE
FOLLOWING: 1) THIRD-PARTY CLAIMS AGAINST YOU FOR
DAMAGES (OTHER THAN THOSE UNDER THE FIRST ITEM LISTED
ABOVE); 2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR
3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY
ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST
PROFITS OR SAVINGS), EVEN IF IBM, ITS SUPPLIERS OR YOUR
RESELLER IS INFORMED OF THEIR POSSIBILITY. SOME
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
Part 2 - Worldwide Country-Unique Terms
ASIA PACIFIC
AUSTRALIA: The IBM Warranty for Machines: The following paragraph is
added to this Section:
The warranties specified in this Section are in addition to any rights you may
have under the Trade Practices Act 1974 or other legislation and are only
limited to the extent permitted by the applicable legislation.
Extent of Warranty: The following replaces the first and second sentences of
this Section:
The warranty does not cover the repair or exchange of a Machine resulting
from misuse, accident, modification, unsuitable physical or operating
environment, operation in other than the Specified Operating Environment,
improper maintenance by you, or failure caused by a product for which IBM
is not responsible.
56
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
Limitation of Liability: The following is added to this Section:
Where IBM is in breach of a condition or warranty implied by the Trade
Practices Act 1974, IBM’s liability is limited to the repair or replacement of the
goods or the supply of equivalent goods. Where that condition or warranty
relates to right to sell, quiet possession or clear title, or the goods are of a
kind ordinarily acquired for personal, domestic or household use or
consumption, then none of the limitations in this paragraph apply.
PEOPLE’S REPUBLIC OF CHINA: Governing Law: The following is added
to this Statement:
The laws of the State of New York govern this Statement.
INDIA: Limitation of Liability: The following replaces items 1 and 2 of this
Section:
1. liability for bodily injury (including death) or damage to real property and
tangible personal property will be limited to that caused by IBM’s
negligence;
2. as to any other actual damage arising in any situation involving
nonperformance by IBM pursuant to, or in any way related to the subject
of this Statement of Warranty, IBM’s liability will be limited to the charge
paid by you for the individual Machine that is the subject of the claim.
NEW ZEALAND: The IBM Warranty for Machines: The following paragraph
is added to this Section:
The warranties specified in this Section are in addition to any rights you may
have under the Consumer Guarantees Act 1993 or other legislation which
cannot be excluded or limited. The Consumer Guarantees Act 1993 will not
apply in respect of any goods which IBM provides, if you require the goods
for the purposes of a business as defined in that Act.
Limitation of Liability: The following is added to this Section:
Where Machines are not acquired for the purposes of a business as defined in
the Consumer Guarantees Act 1993, the limitations in this Section are subject
to the limitations in that Act.
EUROPE, MIDDLE EAST, AFRICA (EMEA)
The following terms apply to all EMEA countries.
The terms of this Statement of Warranty apply to Machines purchased from
an IBM reseller. If you purchased this Machine from IBM, the terms and
conditions of the applicable IBM agreement prevail over this warranty
statement.
Warranty Service
Appendix F. Product warranties and notices
57
If you purchased an IBM Machine in Austria, Belgium, Denmark, Estonia,
Finland, France, Germany, Greece, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland or
United Kingdom, you may obtain warranty service for that Machine in any of
those countries from either (1) an IBM reseller approved to perform warranty
service or (2) from IBM.
If you purchased an IBM Personal Computer Machine in Albania, Armenia,
Belarus, Bosnia and Herzegovina, Bulgaria, Croatia, Czech Republic, Georgia,
Hungary, Kazakhstan, Kirghizia, Federal Republic of Yugoslavia, Former
Yugoslav Republic of Macedonia (FYROM), Moldova, Poland, Romania,
Russia, Slovak Republic, Slovenia, or Ukraine, you may obtain warranty
service for that Machine in any of those countries from either (1) an IBM
reseller approved to perform warranty service or (2) from IBM.
The applicable laws, Country-unique terms and competent court for this
Statement are those of the country in which the warranty service is being
provided. However, the laws of Austria govern this Statement if the warranty
service is provided in Albania, Armenia, Belarus, Bosnia and Herzegovina,
Bulgaria, Croatia, Czech Republic, Federal Republic of Yugoslavia, Georgia,
Hungary, Kazakhstan, Kirghizia, Former Yugoslav Republic of Macedonia
(FYROM), Moldova, Poland, Romania, Russia, Slovak Republic, Slovenia, and
Ukraine.
The following terms apply to the country specified:
EGYPT: Limitation of Liability: The following replaces item 2 in this Section:
2. as to any other actual direct damages, IBM’s liability will be limited to the
total amount you paid for the Machine that is the subject of the claim.
Applicability of suppliers and resellers (unchanged).
FRANCE: Limitation of Liability: The following replaces the second sentence
of the first paragraph of this Section:
In such instances, regardless of the basis on which you are entitled to claim
damages from IBM, IBM is liable for no more than: (items 1 and 2
unchanged).
GERMANY: The IBM Warranty for Machines: The following replaces the
first sentence of the first paragraph of this Section:
The warranty for an IBM Machine covers the functionality of the Machine for
its normal use and the Machine’s conformity to its Specifications.
The following paragraphs are added to this Section:
The minimum warranty period for Machines is six months.
58
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
In case IBM or your reseller are unable to repair an IBM Machine, you can
alternatively ask for a partial refund as far as justified by the reduced value of
the unrepaired Machine or ask for a cancellation of the respective agreement
for such Machine and get your money refunded.
Extent of Warranty: The second paragraph does not apply.
Warranty Service: The following is added to this Section:
During the warranty period, transportation for delivery of the failing Machine
to IBM will be at IBM’s expense.
Production Status: The following paragraph replaces this Section:
Each Machine is newly manufactured. It may incorporate in addition to new
parts, re-used parts as well.
Limitation of Liability: The following is added to this Section:
The limitations and exclusions specified in the Statement of Warranty will not
apply to damages caused by IBM with fraud or gross negligence and for
express warranty.
In item 2, replace ″U.S. $100,000″ with ″1.000.000 DEM.″
The following sentence is added to the end of the first paragraph of item 2:
IBM’s liability under this item is limited to the violation of essential
contractual terms in cases of ordinary negligence.
IRELAND: Extent of Warranty: The following is added to this Section:
Except as expressly provided in these terms and conditions, all statutory
conditions, including all warranties implied, but without prejudice to the
generality of the foregoing all warranties implied by the Sale of Goods Act
1893 or the Sale of Goods and Supply of Services Act 1980 are hereby
excluded.
Limitation of Liability: The following replaces items one and two of the first
paragraph of this Section:
1. death or personal injury or physical damage to your real property solely
caused by IBM’s negligence; and 2. the amount of any other actual direct
damages, up to the greater of Irish Pounds 75,000 or 125 percent of the
charges (if recurring, the 12 months’ charges apply) for the Machine that is the
subject of the claim or which otherwise gives rise to the claim.
Applicability of suppliers and resellers (unchanged).
The following paragraph is added at the end of this Section:
IBM’s entire liability and your sole remedy, whether in contract or in tort, in
respect of any default shall be limited to damages.
Appendix F. Product warranties and notices
59
ITALY: Limitation of Liability: The following replaces the second sentence in
the first paragraph:
In each such instance unless otherwise provided by mandatory law, IBM is
liable for no more than: (item 1 unchanged) 2) as to any other actual damage
arising in all situations involving non-performance by IBM pursuant to, or in
any way related to the subject matter of this Statement of Warranty, IBM’s
liability, will be limited to the total amount you paid for the Machine that is
the subject of the claim.
Applicability of suppliers and resellers (unchanged).
The following replaces the second paragraph of this Section:
Unless otherwise provided by mandatory law, IBM and your reseller are not
liable for any of the following: (items 1 and 2 unchanged) 3) indirect damages,
even if IBM or your reseller is informed of their possibility.
SOUTH AFRICA, NAMIBIA, BOTSWANA, LESOTHO AND SWAZILAND:
Limitation of Liability: The following is added to this Section:
IBM’s entire liability to you for actual damages arising in all situations
involving nonperformance by IBM in respect of the subject matter of this
Statement of Warranty will be limited to the charge paid by you for the
individual Machine that is the subject of your claim from IBM.
TURKIYE: Production Status: The following replaces this Section:
IBM fulfills customer orders for IBM Machines as newly manufactured in
accordance with IBM’s production standards.
UNITED KINGDOM: Limitation of Liability: The following replaces items 1
and 2 of the first paragraph of this Section:
1. death or personal injury or physical damage to your real property solely
caused by IBM’s negligence;
2. the amount of any other actual direct damages or loss, up to the greater of
Pounds Sterling 150,000 or 125 percent of the charges (if recurring, the 12
months’ charges apply) for the Machine that is the subject of the claim or
which otherwise gives rise to the claim.
The following item is added to this paragraph:
3. breach of IBM’s obligations implied by Section 12 of the Sale of Goods Act
1979 or Section 2 of the Supply of Goods and Services Act 1982.
Applicability of suppliers and resellers (unchanged).
The following is added to the end of this Section:
IBM’s entire liability and your sole remedy, whether in contract or in tort, in
respect of any default will be limited to damages.
60
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
NORTH AMERICA
CANADA: Warranty Service: The following is added to this section:
To obtain warranty service from IBM, call 1-800-565-3344. In Toronto, call
416-383-3344.
UNITED STATES OF AMERICA: Warranty Service: The following is added
to this section:
To obtain warranty service from IBM, call 1-800-772-2227.
Notices
This publication was developed for products and services offered in the
U.S.A.
IBM may not offer the products, services, or features discussed in this
document in other countries. Consult your local IBM representative for
information on the products and services currently available in your area. Any
reference to an IBM product, program, or service is not intended to state or
imply that only that IBM product, program, or service may be used. Any
functionally equivalent product, program, or service that does not infringe
any IBM intellectual property right may be used instead. However, it is the
user’s responsibility to evaluate and verify the operation of any non-IBM
product, program, or service.
IBM may have patents or pending patent applications covering subject matter
described in this document. The furnishing of this document does not give
you any license to these patents. You can send license inquiries, in writing, to:
IBM Director of Licensing
IBM Corporation
North Castle Drive
Armonk, NY 10504-1785
U.S.A.
The following paragraph does not apply to the United Kingdom or any
country where such provisions are inconsistent with local law:
INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS
PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow
disclaimer of express or implied warranties in certain transactions, therefore,
this statement may not apply to you.
This information could include technical inaccuracies or typographical errors.
Changes are periodically made to the information herein; these changes will
Appendix F. Product warranties and notices
61
be incorporated in new editions of the publication. IBM may make
improvements and/or changes in the product(s) and/or the program(s)
described in this publication at any time without notice.
IBM may use or distribute any of the information you supply in any way it
believes appropriate without incurring any obligation to you.
Any performance data contained herein was determined in a controlled
environment. Therefore, the result obtained in other operating environments
may vary significantly. Some measurements may have been made on
development-level systems and there is no guarantee that these measurements
will be the same on generally available systems. Furthermore, some
measurements may have been estimated through extrapolation. Actual results
may vary. Users of this document should verify the applicable data for their
specific environment.
Trademarks
The following terms are trademarks of the IBM Corporation in the United
States or other countries or both:
IBM
HelpCenter
Microsoft, PowerPoint, Windows, and Windows NT are trademarks of
Microsoft Corporation in the United States or other countries or both.
Other company, product, and service names may be trademarks or service
marks of others.
Federal Communications Commission (FCC) statement
Note: This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference, in which case the
user will be required to correct the interference at his own expense.
Properly shielded and grounded cables and connectors must be used in order
to meet FCC emission limits. IBM is not responsible for any radio or television
interference caused by using other than recommended cables and connectors
62
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
or by unauthorized changes or modifications to this equipment. Unauthorized
changes or modifications could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Industry Canada Class A emission compliance statement
This Class A digital apparatus complies with Canadian ICES-003.
Avis de conformite a la reglementation d’Industrie Canada
Cet appareil numérique de la classe A est conform à la norme NMB-003 du
Canada.
Deutsche EMV-Direktive (electromagnetische Verträglichkeit)
Dieses Gerät ist berechtigt in Übereinstimmung mit dem deutschen EMVG
vom 9.Nov.92 das EG-Konformitätszeichen zu führen.
Der Aussteller der Konformitätserklärung ist die IBM UK, Greenock.
Dieses Gerät erfüllt die Bedingungen der EN 55022 Klasse A. Für diese Klasse
von Geräten gilt folgende Bestimmung nach dem EMVG:
Geräte dürfen an Orten, für die sie nicht ausreichend entst÷rt sind, nur mit
besonderer Genehmigung des Bundesminesters für Post und
Telekommunikation oder des Bundesamtes für Post und Telekommunikation
betrieben werden. Die Genehmigung wird erteilt, wenn keine
elektromagnetischen St÷rungen zu erwarten sind.
(Auszug aus dem EMVG vom 9.Nov.92, Para.3. Abs.4)
Hinweis: Dieses Genehmigungsverfahren ist von der Deutschen Bundespost noch
nicht ver÷ffentlicht worden.
Europen Union - EMC directive
This product is in conformity with the protection requirements of EU Council
Directive 89/366/ECC on the approximation of the laws of the Member States
relating to electromagnetic compatibility.
Appendix F. Product warranties and notices
63
IBM cannot accept responsibility for any failure to satisfy the protection
requirements resulting from a non-recommended modification of the product,
including the fitting of non-IBM option cards.
This product has been tested and found to comply with the limits for Class A
Information Technology Equipment according to CISPR 22/European
Standard EN 55022. The limits for Class A equipment were derived for
commercial and industrial environments to provide reasonable protection
against interference with licensed communication equipment.
Warning: This is a Class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take adequate
measures.
Union Européenne - Directive Conformité électromagnétique
Ce produit est conforme aux exigences de protection de la Directive
89/336/EEC du Conseil de l’UE sur le rapprochement des lois des États
membres en matière de compatibilité électromagnétique.
IBM ne peut accepter aucune responsabilité pour le manquement aux
exigences de protection résultant d’une modification non recommandée du
produit, y compris l’installation de cartes autres que les cartes IBM.
Ce produit a été testé et il satisfait les conditions de l’équipement
informatique de Classe A en vertu de CISPR22/Standard européen EN 55022.
Les conditions pour l’équipement de Classe A ont été définies en fonction
d’un contexte d’utilisation commercial et industriel afin de fournir une
protection raisonnable contre l’interférence d’appareils de communication
autorisés.
Avertissement : Ceci est un produit de Classe A. Dans un contexte résidentiel, ce
produit peut causer une interférence radio exigeant que l’utilisateur prenne des
mesures adéquates.
Union Europea - Normativa EMC
Questo prodotto è conforme alle normative di protezione ai sensi della
Direttiva del Consiglio dell’Unione Europea 89/336/CEE sull’armonizzazione
legislativa degli stati membri in materia di compatibilità elettromagnetica.
IBM non accetta responsabilità alcuna per la mancata conformità alle
normative di protezione dovuta a modifiche non consigliate al prodotto,
compresa l’installazione di schede e componenti di marca diversa da IBM.
64
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
Le prove effettuate sul presente prodotto hanno accertato che esso rientra nei
limiti stabiliti per le le apparecchiature di informatica Classe A ai sensi del
CISPR 22/Norma Europea EN 55022. I limiti delle apparecchiature della
Classe A sono stati stabiliti al fine di fornire ragionevole protezione da
interferenze mediante dispositivi di comunicazione in concessione in ambienti
commerciali ed industriali.
Avvertimento: Questso è un prodotto appartenente alla Classe A. In ambiente
domestico, tale prodotto può essere causa di interferenze radio, nel qual caso l’utente
deve prendere misure adeguate.
Unione Europea - Directiva EMC (Conformidad électromagnética)
Este producto satisface los requisitos de protección del Consejo de la UE,
Directiva 89/336/CEE en lo que a la legislatura de los Estados Miembros
sobre compatibilidad electromagnética se refiere.
IBM no puede aceptar responsabilidad alguna si este producto deja de
satisfacer dichos requisitos de protección como resultado de una modificación
no recomendada del producto, incluyendo el ajuste de tarjetas de opción que
no sean IBM.
Este producto ha sido probado y satisface los límites para Equipos
Informáticos Clase A de conformidad con el Estándar CISPR22 y el Estándar
Europeo EN 55022. Los límites para los equipos de Clase A se han establecido
para entornos comerciales e industriales a fin de proporcionar una protección
razonable contra las interferencias con dispositivos de comunicación
licenciados.
Advertencia: Este es un producto de Clase A. En un entorno doméstico este producto
podría causar radiointerferencias en cuyo caso el usuario deberá tomar las medidas
adecuadas.
Appendix F. Product warranties and notices
65
66
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide
Part Number: 33L3369
Printed in the United States of America
on recycled paper containing 10%
recovered post-consumer fiber.
(1P) P/N: 33L3369
Download PDF