KEM T2019 T530

KEMET Organic Capacitor (KO-CAP®) – Industrial
T530 High Capacitance Low ESR Polymer Electrolytic
125°C, 2.5 – 16 VDC
Overview
The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic
capacitor with a conductive polymer cathode capable of
delivering very low ESR and improved capacitance retention at
high frequencies. KO-CAP combines the low ESR of multilayer
ceramic, the high capacitance of aluminum electrolytic and the
volumetric efficiency of tantalum into a single surface mount
package. Unlike liquid electrolyte-based capacitors, KO-CAP has
a very long operational life and high ripple current capabilities.
The T530 High Capacitance Polymer Electrolytic expands the
capacitance ranges of the T520 KO-CAP with a higher 125°C
operating temperature and lower ESR options. The improved ESR
levels allow for higher ripple current capability than the T520. The
T530's reduced ESR, ripple current capability and capacitance
retention at higher frequencies provides the lowest total capacitance
and most economical solution for high switching frequency DC
power applications.
Benefits
•
•
•
•
•
•
•
•
Extremely low ESR
Volumetrically efficient
High frequency capacitance retention
100% accelerated steady state aging
100% surge current tested
Utilizes multiple tantalum anode technology
EIA standard case sizes
Halogen-Free Epoxy/RoHS Compliant
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Applications
Typical applications include high speed server, microprocessor decoupling and high ripple current applications.
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn Solder
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2019_T530 • 3/15/2016
1
KEMET Organic Capacitor (KO-CAP®) – Industrial
T530 High Capacitance Low ESR Polymer Electrolytic 125°C, 2.5 – 16 VDC
K-SIM
For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET’s K-SIM software. KEMET K-SIM is
designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels.
Ordering Information
T
530
X
337
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
530 = High
Capacitance
125°C Rated
Polymer
D, X, Y
T=
Tantalum
First two digits
represent significant
figures. Third digit
specifies number of
zeros.
M
010
A
Capacitance Rated Voltage Failure Rate/
Tolerance
(VDC)
Design
M = ±20%
2R5 = 2.5
003 = 3
004 = 4
006 = 6.3
010 = 10
016 = 16
A = N/A
T
E005
Termination
Finish
ESR Code
T = 100% Matte
E = ESR
Tin (Sn) plated*
Last three
H = Standard
digits specify
solder Coated
ESR in mΩ
(005 = 5
(SnPb 5% Pb
minimum)
mΩ )
Packaging
(C-Spec)
Blank = 7"
Reel
7280 = 13"
Reel
* For gold plated termination please contact KEMET representative
Performance Characteristics
Item
Performance Characteristics
Operating Temperature
Rated Capacitance Range
Capacitance Tolerance
Rated Voltage Range
DF (120 Hz)
ESR (100 kHz)
Leakage Current
−55°C to 125°C
150 – 1,500 µF at 120 Hz/25°C
M Tolerance (20%)
2.5 – 16 V
8%
Refer to Part Number Electrical Specification Table
≤ 0.1 CV (µA) at rated voltage after 5 minutes
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2019_T530 • 3/15/2016
2
KEMET Organic Capacitor (KO-CAP®) – Industrial
T530 High Capacitance Low ESR Polymer Electrolytic 125°C, 2.5 – 16 VDC
Qualification
Test
Condition
Characteristics
Δ C/C
Endurance
Storage Life
Humidity
Temperature Stability
105°C at rated voltage, 2,000 hours
125°C at 2/3 rated voltage, 2,000 hours
125°C at 0 volts, 2,000 hours
60°C, 90% RH, 1,000 hours, No Load
Extreme temperature exposure at a
succession of continuous steps at +25ºC,
−55ºC, +25ºC, +85ºC, +105ºC, +25ºC
DF
≤ initial limit
DCL
2 x initial limit at 125ºC
ESR
2 x initial limit
Δ C/C
Within -20%/+10% of initial value
DF
Within initial limits
DCL
Within 2.0 x initial limit
ESR
Within 2.0 x initial limit
Δ C/C
Within -5%/+35% of initial value
DF
≤ initial limit
DCL
Within 3.0 x initial limit
+25°C
−55°C
+85°C
+125°C
Δ C/C
IL*
±20%
±20%
±30%
DF
IL
IL
1.2 x IL
1.5 x IL
N/A
10 x IL
10 x IL
DCL
IL
Δ C/C
Surge Voltage
Mechanical Shock/Vibration
Within -20%/+10% of initial value
105°C, 1.32 x rated voltage, 33Ω Resistance, 1,000 cycles
MIL–STD–202, Method 213, Condition I, 100 G peak
MIL–STD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,
20 G peak
Within -20%/+10% of initial value
DF
Within initial limits
DCL
Within initial limits
ESR
Within initial limits
Δ C/C
Within ±10% of initial value
DF
Within initial limits
DCL
Within initial limits
*IL = Initial limit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2019_T530 • 3/15/2016
3
KEMET Organic Capacitor (KO-CAP®) – Industrial
T530 High Capacitance Low ESR Polymer Electrolytic 125°C, 2.5 – 16 VDC
Electrical Characteristics
Capacitance vs. Frequency
ESR vs. Frequency
10
1,000
T530D227M006ATE006_Imp
T530X477M006ATE004_Imp
1
T530D227M006ATE006_ESR
100
T530Y337M006ATE005_ESR
Capacitance (μF)
Impedance, ESR (Ohms)
T530Y337M006ATE005_Imp
T530X477M006ATE004_ESR
0.1
T530D227M006ATE006
T530Y337M006ATE005
10
T530X477M006ATE004
0.01
0.001
100
1,000
10,000
100,000
Frequency (Hz)
1,000,000
1
10,000,000
100
1,000
10,000
100,000
Frequency (Hz)
1,000,000
10,000,000
Dimensions – Millimeters (Inches)
Metric will govern
CATHODE (-) END VIEW
SIDE VIEW
ANODE (+) END VIEW
BOTTOM VIEW
A
B
W
B
Glue pad
shape/design at
KEMET's option
H
X
T
S
S
Case Size
KEMET
D
X
Y
EIA
P
R
L
Total
Weight
Component Dimensions
L
W
H
F ±0.1
S ±0.3 B ±0.15 (Ref)
±(0.004) ±(0.012)
±0.006
7.3 ±0.3
4.3 ±0.3
2.8 ±0.3
2.4 (0.094)
(0.287 ±0.012) (0.169 ±0.012) (0.110 ±0.012)
7.3 ±0.3
4.3 ±0.3
4.0 ±0.3
7343–43
2.4 (0.094)
(0.287 ±0.012) (0.169 ±0.012) (0.157 ±0.012)
7.3 ±0.3
4.3 ±0.3
3.8 ±0.2
7343–40
2.4 (0.094)
(0.287 ±0.012) (0.169 ±0.012) (0.150 ±0.008)
7343–31
Termination cutout
at KEMET's option,
either end
1.3 (0.051)
0.5 (0.020)
1.3 (0.051)
0.5 (0.020)
1.3 (0.051)
0.5 (0.020)
X (Ref)
F
P (Ref)
R (Ref)
T (Ref)
0.10 ±0.10
0.9 (0.035) 1.0 (0.039) 0.13 (0.005)
(0.004 ±0.004)
0.10 ±0.10
1.7 (0.067) 1.0 (0.039) 0.13 (0.005)
(0.004 ±0.004)
0.10 ±0.10
1.7 (0.067) 1.0 (0.039) 0.13 (0.005)
(0.004 ±0.004)
A
(Minimum)
(mg)
3.8 (0.150)
307.51
3.8 (0.150)
410.89
3.8 (0.150)
378.06
Notes: (Ref) – Dimensions provided for reference only.
These weights are provided as reference. If exact weights are needed, please contact your KEMET Sales Representative
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2019_T530 • 3/15/2016
4
KEMET Organic Capacitor (KO-CAP®) – Industrial
T530 High Capacitance Low ESR Polymer Electrolytic 125°C, 2.5 – 16 VDC
Table 1 – Ratings & Part Number Reference
Rated
Voltage
Rated Case Code/
Cap
Case Size
Maximum
Allowable
Ripple Current
MSL
Maximum
Operating
Temp
mΩ at +25°C
100 kHz
Maximum
5
6
10
5
5
6
7
6
10
7
6
5
6
4
5
6
5
10
10
10
8
5
6
6
10
5
6
5
4
5
6
10
6
5
6
6
10
5
6
10
5
4
5
6
10
10
18
5
6
mA at +45°C
100 kHz
Reflow Temp
≤ 260ºC
ºC
7100
6500
5000
7100
7300
6600
6100
6500
5000
6000
6700
7300
6600
8200
7300
6700
7300
5000
5000
5200
5800
7100
6500
6500
5000
7300
6600
7300
8200
7300
6700
5200
6700
7100
6500
6500
5000
7300
6600
5100
7300
8200
7300
6700
5200
5200
3900
7100
6500
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
KEMET Part
Number
DC
Leakage
DF
ESR
% at +25°C
120 Hz
Maximum
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
10
10
470
470
470
560
680
680
680
680
680
680
680
1000
1000
1000
1000
1000
1500
470
680
1000
1500
330
330
470
470
470
470
680
680
680
680
680
1000
220
220
330
330
330
330
330
470
470
470
470
470
680
680
150
150
D/7343-31
D/7343-31
D/7343-31
D/7343-31
Y/7343-40
Y/7343-40
Y/7343-40
D/7343-31
D/7343-31
D/7343-31
X/7343-43
Y/7343-40
Y/7343-40
X/7343-43
X/7343-43
X/7343-43
X/7343-43
D/7343-31
D/7343-31
X/7343-43
X/7343-43
D/7343-31
D/7343-31
D/7343-31
D/7343-31
Y/7343-40
Y/7343-40
Y/7343-40
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
D/7343-31
D/7343-31
D/7343-31
D/7343-31
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
D/7343-31
D/7343-31
T530D477M2R5A(1)E005
T530D477M2R5A(1)E006
T530D477M2R5A(1)E010
T530D567M2R5A(1)E005
T530Y687M2R5A(1)E005
T530Y687M2R5A(1)E006
T530Y687M2R5A(1)E007
T530D687M2R5A(1)E006
T530D687M2R5A(1)E010
T530D687M2R5A(1)E007
T530X687M2R5A(1)E006
T530Y108M2R5A(1)E005
T530Y108M2R5A(1)E006
T530X108M2R5A(1)E004
T530X108M2R5A(1)E005
T530X108M2R5A(1)E006
T530X158M2R5A(1)E005
T530D477M003A(1)E010
T530D687M003A(1)E010
T530X108M003A(1)E010
T530X158M003A(1)E008
T530D337M004A(1)E005
T530D337M004A(1)E006
T530D477M004A(1)E006
T530D477M004A(1)E010
T530Y477M004A(1)E005
T530Y477M004A(1)E006
T530Y687M004A(1)E005
T530X687M004A(1)E004
T530X687M004A(1)E005
T530X687M004A(1)E006
T530X687M004A(1)E010
T530X108M004A(1)E006
T530D227M006A(1)E005
T530D227M006A(1)E006
T530D337M006A(1)E006
T530D337M006A(1)E010
T530Y337M006A(1)E005
T530Y337M006A(1)E006
T530Y337M006A(1)E010
T530Y477M006A(1)E005
T530X477M006A(1)E004
T530X477M006A(1)E005
T530X477M006A(1)E006
T530X477M006A(1)E010
T530X687M006A(1)E010
T530X687M006A(1)E018
T530D157M010A(1)E005
T530D157M010A(1)E006
µA at +25°C
Maximum/
5 Minutes
118
118
118
140
170
170
170
170
170
170
170
250
250
250
250
250
375
141
204
300
450
132
132
188
188
188
188
272
272
272
272
272
400
139
139
208
208
208
208
208
296
296
296
296
296
428
428
150
150
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
µA at +25°C
Maximum/
5 Minutes
% at +25°C
120 Hz
Maximum
mΩ at +25°C
100 kHz
Maximum
mA at +45°C
100 kHz
Reflow Temp
≤ 260ºC
ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
Maximum
Allowable
Ripple Current
MSL
Maximum
Operating
Temp
(1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2019_T530 • 3/15/2016
5
KEMET Organic Capacitor (KO-CAP®) – Industrial
T530 High Capacitance Low ESR Polymer Electrolytic 125°C, 2.5 – 16 VDC
Table 1 – Ratings & Part Number Reference cont'd
Rated
Voltage
Rated Case Code/
Cap
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
Maximum
Allowable
Ripple Current
MSL
Maximum
Operating
Temp
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
µA at +25°C
Maximum/
5 Minutes
% at +25°C
120 Hz
Maximum
mΩ at +25°C
100 kHz
Maximum
mA at +45°C
100 kHz
Reflow Temp
≤ 260ºC
ºC
10
10
10
10
10
10
10
10
16
16
16
150
220
220
220
330
330
330
330
150
150
150
D/7343-31
D/7343-31
D/7343-31
Y/7343-40
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
T530D157M010A(1)E010
T530D227M010A(1)E006
T530D227M010A(1)E010
T530Y227M010A(1)E006
T530X337M010A(1)E004
T530X337M010A(1)E005
T530X337M010A(1)E006
T530X337M010A(1)E010
T530X157M016A(1)E015
T530X157M016A(1)E025
T530X157M016A(1)E040
150
220
220
220
330
330
330
330
240
240
240
8
8
8
8
8
8
8
8
8
8
8
10
6
10
6
4
5
6
10
15
25
40
5000
6500
5000
6600
8200
7300
6700
5200
4200
3300
2600
3
3
3
3
3
3
3
3
3
3
3
125
125
125
125
125
125
125
125
125
125
125
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
µA at +25°C
Maximum/
5 Minutes
% at +25°C
120 Hz
Maximum
mΩ at +25°C
100 kHz
Maximum
mA at +45°C
100 kHz
Reflow Temp
≤ 260ºC
ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
Maximum
Allowable
Ripple Current
MSL
Maximum
Operating
Temp
(1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2019_T530 • 3/15/2016
6
KEMET Organic Capacitor (KO-CAP®) – Industrial
T530 High Capacitance Low ESR Polymer Electrolytic 125°C, 2.5 – 16 VDC
Derating Guidelines
100%
Maximum Recommended
Transient Voltage (1 ms – 1 µs)
−55°C to 105°C
90% of VR
80% of VR
105°C to 125°C
60% of VR
54% of VR
2.5 V ≤ VR ≤ 10 V
VR = 16V
2.5 V ≤ VR ≤ 10 V
VR = 16 V
VR
VR
95%
Maximum Transient Voltage
90%
% Rated Voltage
Voltage
Rating
Maximum
Recommended Steady
State Voltage
85%
Recommended Application Voltage VR ≤ 10 V
80%
75%
Recommended Application Voltage VR > 10 V
70%
67%
65%
60%
60%
55%
54%
50%
-55
67% of VR
67% of VR
25
45
85
Temperature (ºC)
105
125
VR = Rated Voltage
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to equivalent
series resistance (ESR) and the power dissipation capabilities of
the device. Permissible AC ripple voltage which may be applied is
limited by two criteria:
1. The positive peak AC voltage plus the DC bias voltage, if any,
must not exceed the DC voltage rating of the capacitor.
2. The negative peak AC voltage in combination with bias
voltage, if any, must not exceed the allowable limits specified for
reverse voltage. See the Reverse Voltage section for allowable
limits.
The maximum power dissipation by case size can be determined
using the table at right. The maximum power dissipation rating
stated in the table must be reduced with increasing environmental
operating temperatures. Refer to the table below for temperature
compensation requirements.
KEMET
Case Code
EIA
Case Code
D
Y
X
7343-31
7343-40
7443-43
Maximum Power
Dissipation (P max)
mWatts at 45°C with
+30°C Rise
255
263
270
The maximum power dissipation rating must be reduced with increasing
environmental operating temperatures. Refer to the Temperature
Compensation Multiplier table for details.
Temperature Compensation Multipliers
for Maximum Ripple Current
T ≤ 45°C
1.00
45° C < T ≤ 85°C
0.70
85°C < T ≤ 125°C
0.25
T= Environmental Temperature
Using the P max of the device, the maximum allowable rms ripple
current or voltage may be determined.
I(max) = √P max/R
E(max) = Z √P max/R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation (watts)
R = ESR at specified frequency (ohms)
Z = Impedance at specified frequency (ohms)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2019_T530 • 3/15/2016
7
KEMET Organic Capacitor (KO-CAP®) – Industrial
T530 High Capacitance Low ESR Polymer Electrolytic 125°C, 2.5 – 16 VDC
Reverse Voltage
Polymer electrolytic capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity.
These devices will withstand a small degree of transient voltage reversal for short periods as shown in the below table.
Temperature
Permissible Transient Reverse Voltage
25°C
55°C
85°C
105°C
125°C*
15% of Rated Voltage
10% of Rated Voltage
5% of Rated Voltage
3% of Rated Voltage
1% of Rated Voltage
*For series rated to 125°C
Table 2 – Land Dimensions/Courtyard
KEMET
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
Case
EIA
W
L
S
V1
V2
W
L
S
V1
V2
W
L
S
V1
V2
D
7343–31
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
X1
7343–43
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Y1
7343–40
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes.
Density Level C: For high component desity product applications. Before adapting the minimum land pattern variations the user should perform qualification
testing based on the conditions outlined in IPC standard 7351 (IPC–7351).
¹ Height of these chips may create problems in wave soldering.
2
Land pattern geometry is too small for silkscreen outline.
V1
L
L
W
W
V2
S
Grid Placement Courtyard
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2019_T530 • 3/15/2016
8
KEMET Organic Capacitor (KO-CAP®) – Industrial
T530 High Capacitance Low ESR Polymer Electrolytic 125°C, 2.5 – 16 VDC
Soldering Process
KEMET’s families of surface mount capacitors are compatible
with wave (single or dual), convection, IR, or vapor phase reflow
techniques. Preheating of these components is recommended
to avoid extreme thermal stress. KEMET's recommended profile
conditions for convection and IR reflow reflect the profile conditions
of the IPC/J–STD–020D standard for moisture sensitivity testing.
The devices can safely withstand a maximum of three reflow
passes at these conditions.
Please note that although the X/7343–43 case size can withstand
wave soldering, the tall profile (4.3 mm maximum) dictates care in
wave process development.
SnPb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Minimum (TSmin)
100°C
150°C
Temperature Maximum (TSmax)
150°C
200°C
Time (ts) from Tsmin to Tsmax)
60 – 120 seconds
60 – 120 seconds
Ramp-up Rate (TL to TP)
3°C/seconds maximum
3°C/seconds maximum
Liquidous Temperature (TL)
183°C
217°C
Time Above Liquidous (tL)
60 – 150 seconds
220°C*
235°C**
60 – 150 seconds
250°C*
260°C**
Peak Temperature (TP)
Time within 5°C of Maximum
Peak Temperature (tP)
Ramp-down Rate (TP to TL)
20 seconds maximum
30 seconds maximum
6°C/seconds maximum
6°C/seconds maximum
Time 25°C to Peak Temperature
6 minutes maximum
8 minutes maximum
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly reflow.
*Case Size D, E, P, Y, and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
TP
TL
Temperature
Hand soldering should be performed with care due to the difficulty
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
and the termination, until reflow occurs. Once reflow occurs, the
iron should be removed immediately. “Wiping” the edges of a chip
and heating the top surface is not recommended.
Profile Feature
tP
Maximum Ramp Up Rate = 3ºC/seconds
Maximum Ramp Down Rate = 6ºC/seconds
tL
Tsmax
Tsmin
25
tS
25ºC to Peak
Time
Storage
All KO-CAP series are shipped in moisture barrier bags with a desiccant and moisture indicator card. These series are classified
as MSL3 (Moisture Sensitivity Level 3). Product contained within the moisture barrier bags should be stored in normal working
environments with temperatures not to exceed 40°C and humidity not in excess of 90% RH.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2019_T530 • 3/15/2016
9
KEMET Organic Capacitor (KO-CAP®) – Industrial
T530 High Capacitance Low ESR Polymer Electrolytic 125°C, 2.5 – 16 VDC
Construction
Polarity Stripe (+)
Molded Epoxy
Case
Detailed Cross Section
Silver Paint
(Fourth Layer)
Polarity
Bevel (+)
Wire
Leadframe
(- Cathode)
Wire
Weld
(to attach wire)
Carbon
(Third Layer)
Silver Adhesive
Leadframe
(+ Anode)
Molded Epoxy
Case
Polymer
(Second Layer)
Ta2O5 Dielectric
(First Layer)
Tantalum
Capacitor Marking
Date Code *
KEMET
Multi-Anode
Polymer
Polarity
Indicator (+)
1 digit = Last number of Year
2 = 2012
3 = 2013
4 = 2014
5 = 2015
6 = 2016
7 = 2017
2nd and 3rd digit = Week of the Year
01 = 1st week of the Year to
52 = 52nd week of the Year
st
Picofarad
Code
KEMET
ID
Rated
Voltage
Date
Code*
* 230 = 30th week of 2012
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2019_T530 • 3/15/2016
10
KEMET Organic Capacitor (KO-CAP®) – Industrial
T530 High Capacitance Low ESR Polymer Electrolytic 125°C, 2.5 – 16 VDC
Tape & Reel Packaging Information
KEMET’smoldedchipcapacitorfamiliesarepackagedin8and12mmplastictapeon7"and13"reelsinaccordancewithEIA
Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible
with all tape-fed automatic pick-and-place systems.
8 mm (0.315")
or
12 mm (0.472")
Top Tape Thickness
0.10 mm (0.004")
Maximum Thickness
180 mm (7.0")
or
330 mm (13.0")
Table 3 – Packaging Quantity
Case Code
KEMET
S
T
M
U
L
W
Z
V
A
B
C
D
Q
Y
X
E/T428P
H
EIA
3216-12
3528-12
3528-15
6032-15
6032-19
7343-15
7343-17
7343-20
3216-18
3528-21
6032-28
7343-31
7343-12
7343-40
7343-43
7360-38
7360-20
Tape Width
(mm)
7" Reel*
13" Reel*
8
8
8
12
12
12
12
12
8
8
12
12
12
12
12
12
12
2,500
2,500
2,000
1,000
1,000
1,000
1,000
1,000
2,000
2,000
500
500
1,000
500
500
500
1,000
10,000
10,000
8,000
5,000
3,000
3,000
3,000
3,000
9,000
8,000
3,000
2,500
3,000
2,000
2,000
2,000
2,500
* No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2019_T530 • 3/15/2016
11
KEMET Organic Capacitor (KO-CAP®) – Industrial
T530 High Capacitance Low ESR Polymer Electrolytic 125°C, 2.5 – 16 VDC
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
P2
T
T2
ØDo
Po
[10 pitches cumulative
tolerance on tape ± 0.2 mm]
E1
Ao
F
Ko
B1
S1
W
E2
Bo
P1
T1
Center Lines of Cavity
B 1 is for tape feeder reference only,
including draft concentric about B o.
Embossment
For cavity size,
see Note 1 Table 4
ØD 1
Cover Tape
User Direction of Unreeling
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
D0
8 mm
12 mm
1.5 +0.10/-0.0
(0.059 +0.004/-0.0)
16 mm
D1 Minimum
Note 1
1.0
(0.039)
1.5
(0.059)
B1 Maximum
Note 4
4.35
(0.171)
E1
P0
1.75 ±0.10
(0.069 ±0.004)
4.0 ±0.10
(0.157 ±0.004)
P2
2.0 ±0.05
(0.079 ±0.002)
2.0 ±0.1
(0.079 ±0.059)
R Reference
Note 2
25.0
(0.984)
30
(1.181)
S1 Minimum
T Maximum T1 Maximum
Note 3
0.600
(0.024)
0.600
(0.024)
0.100
(0.004)
Variable Dimensions — Millimeters (Inches)
Tape Size
Pitch
E2 Minimum
F
8 mm
Single (4 mm)
6.25
(0.246)
3.5 ±0.05
(0.138 ±0.002)
12 mm
Single (4 mm) &
Double (8 mm)
8.2
(0.323)
10.25
(0.404)
16 mm
Triple (12 mm)
12.1
(0.476)
14.25
(0.561)
P1
2.0 ±0.05 or 4.0 ±0.10
(0.079 ±0.002 or 0.157 ±0.004)
2.0 ±0.05 (0.079 ±0.002) or 4.0
5.5 ±0.05
±0.10 (0.157 ±0.004) or 8.0 ±0.10
(0.217 ±0.002)
(0.315 ±0.004)
7.5±0.10
4.0 ±0.10 (0.157 ±0.004) to 12.0
(0.295 ±0.004)
±0.10 (0.472 ±0.004)
T2 Maximum
W Maximum A0, B0 & K0
2.5
(0.098)
8.3
(0.327)
4.6
(0.181)
12.3
(0.484)
8.0 (0.315)
16.3
(0.642)
Note 5
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and
hole location shall be applied independent of each other.
2. The tape, with or without components, shall pass around R without damage (see Figure 4).
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3).
(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2019_T530 • 3/15/2016
12
KEMET Organic Capacitor (KO-CAP®) – Industrial
T530 High Capacitance Low ESR Polymer Electrolytic 125°C, 2.5 – 16 VDC
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width
Peel Strength
8 mm
0.1 to 1.0 Newton (10 to 100 gf)
12 and 16 mm
0.1 to 1.3 Newton (10 to 130 gf)
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180°
from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 2 – Maximum Component Rotation
°
T
Maximum Component Rotation
Top View
Maximum Component Rotation
Side View
Typical Pocket Centerline
Tape
Width (mm)
8,12
16 – 200
Bo
Maximum
Rotation (
20
10
°
T)
Typical Component Centerline
Ao
Figure 3 – Maximum Lateral Movement
8 mm & 12 mm Tape
0.5 mm maximum
0.5 mm maximum
16 mm Tape
°
s
Tape
Maximum
Width (mm) Rotation (
8,12
20
16 – 56
10
72 – 200
5
°
S)
Figure 4 – Bending Radius
Embossed
Carrier
Punched
Carrier
1.0 mm maximum
1.0 mm maximum
R
Bending
Radius
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
R
T2019_T530 • 3/15/2016
13
KEMET Organic Capacitor (KO-CAP®) – Industrial
T530 High Capacitance Low ESR Polymer Electrolytic 125°C, 2.5 – 16 VDC
Figure 5 – Reel Dimensions
Full Radius,
See Note
W3 (Includes
Access Hole at
Slot Location
(Ø 40 mm minimum)
flange distortion
at outer edge)
W2 (Measured at hub)
D
A
(See Note)
N
C
(Arbor hole
diameter)
B
(see Note)
W1 (Measured at hub)
If present,
tape slot in core
for tape start:
2.5 mm minimum width x
10.0 mm minimum depth
Note: Drive spokes optional; if used, dimensions B and D shall apply.
Table 5 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
A
B Minimum
C
D Minimum
8 mm
178 ±0.20
(7.008 ±0.008)
or
330 ±0.20
(13.000 ±0.008)
1.5
(0.059)
13.0 +0.5/-0.2
(0.521 +0.02/-0.008)
20.2
(0.795)
12 mm
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size
N Minimum
W1
W2 Maximum
W3
50
(1.969)
8.4 +1.5/-0.0
(0.331 +0.059/-0.0)
12.4 +2.0/-0.0
(0.488 +0.078/-0.0)
16.4 +2.0/-0.0
(0.646 +0.078/-0.0)
14.4
(0.567)
18.4
(0.724)
22.4
(0.882)
Shall accommodate tape width
without interference
8 mm
12 mm
16 mm
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2019_T530 • 3/15/2016
14
KEMET Organic Capacitor (KO-CAP®) – Industrial
T530 High Capacitance Low ESR Polymer Electrolytic 125°C, 2.5 – 16 VDC
Figure 6 – Tape Leader & Trailer Dimensions
Embossed Carrier
Carrier Tape
Punched Carrier
8 mm & 12 mm only
END
Round Sprocket Holes
START
Top Cover Tape
Elongated Sprocket Holes
(32 mm tape and wider)
Trailer
160 mm Minimum
Components
100 mm
Minimum Leader
400 mm Minimum
Top Cover Tape
Figure 7 – Maximum Camber
Elongated sprocket holes
(32 mm & wider tapes)
Carrier Tape
Round Sprocket Holes
1 mm Maximum, either direction
Straight Edge
250 mm
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2019_T530 • 3/15/2016
15
KEMET Organic Capacitor (KO-CAP®) – Industrial
T530 High Capacitance Low ESR Polymer Electrolytic 125°C, 2.5 – 16 VDC
KEMET Corporation
World Headquarters
Europe
Asia
Southern Europe
Sasso Marconi, Italy
Tel: 39-051-939111
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
Skopje, Macedonia
Tel: 389-2-55-14-623
Shenzhen, China
Tel: 86-755-2518-1306
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Corporate Offices
Fort Lauderdale, FL
Tel: 954-766-2800
Kamen, Germany
Tel: 49-2307-438110
North America
Northern Europe
Wyboston, United Kingdom
Tel: 44-1480-273082
Taipei, Taiwan
Tel: 886-2-27528585
Espoo, Finland
Tel: 358-9-5406-5000
Southeast Asia
Singapore
Tel: 65-6701-8033
2835 KEMET Way
Simpsonville, SC 29681
Northeast
Wilmington, MA
Tel: 978-658-1663
Southeast
Lake Mary, FL
Tel: 407-855-8886
Central
Novi, MI
Tel: 248-994-1030
Beijing, China
Tel: 86-10-5877-1075
Shanghai, China
Tel: 86-21-6447-0707
Seoul, South Korea
Tel: 82-2-6294-0550
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
Irving, TX
Tel: 972-915-6041
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2019_T530 • 3/15/2016
16
KEMET Organic Capacitor (KO-CAP®) – Industrial
T530 High Capacitance Low ESR Polymer Electrolytic 125°C, 2.5 – 16 VDC
Disclaimer
Allproductspecifications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsibleforcheckingand
verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuchapplications,butare
notintendedtoconstitute–andKEMETspecificallydisclaims–anywarrantyconcerningsuitabilityforaspecificcustomerapplicationoruse.TheInformationisintendedforuseonly
by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
providedbyKEMETwithreferencetotheuseofKEMET’sproductsisgivengratis,andKEMETassumesnoobligationorliabilityfortheadvicegivenorresultsobtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still
occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective
circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2019_T530 • 3/15/2016
17
Download PDF