TECHNICAL DATA SHEET ARTISAN 3 DUAL CONTROL RANGE AR3 SHCMT C Product Specification Product Code: Finish: Product Type: Construction: Supply: AR3 SHCMT C Chrome Contemporary Body is of brass construction Suitable for all plumbing conditions, preferably balanced. The inlet hot water temperature must be at least 10% above the required blend temperature. 15mm Compression connections Working pressures 0.2-5.0 Bar 10 Bar Inlet Connections: Working Pressures: Maximum Static Pressure: Additional Information • Chrome plated to BS EN 248 • Suitable for cavities between 45-75mm • Minimum cold water supply temperature is 5°c • Maximum hot water supply temperature is 80°c • Flow rates at 0.2 Bar (open outlet without flow regulators) 8.0 l/min • Fully serviceable from the front Technical Advice: For further information please call 0844 7016273 or email email@example.com Guarantee: 5 years covering manufacturing faults. System Pressure 0.1bar 0.2bar 0.5bar 1.0bar 2.0bar AR3 SHCMT C - Outlet 1 3.9 7.5 14.1 21 30.5 Bristan, Birch Coppice Business Park, Dordon, Tamworth, B78 1SG Telephone: 0844 701 6274 Facsimile: 0844 701 6275 Web Site: www.bristan.com Email: firstname.lastname@example.org D1 The information contained on this page was correct at date of issue. Fitting dimensions are provided as a guide only. Some variation may occur due to manufacturing tolerances. Bristan pursues a policy of continuing improvement in design and performance of its products and so reserves the right to change specifications without prior notice.