Altinex DA1506RT User`s guide

DISTRIBUTION AMPLIFIERS

DA1506RT

MANUAL PART NUMBER: 400-0016-004

2-IN, 6-OUT VGA

DISTRIBUTION AMPLIFIER

USER’S GUIDE

DISTRIBUTION AMPLIFIERS

TABLE OF CONTENTS

Page

PRECAUTIONS / SAFETY WARNINGS................ 2

GENERAL..........................................................2

RACK-MOUNTING SAFETY GUIDELINES........2

HANDLING ........................................................2

CLEANING.........................................................2

FCC NOTICE .....................................................2

ABOUT YOUR DA1506RT ....................................... 3

TECHNICAL SPECIFICATIONS.............................. 3

PRODUCT DESCRIPTION ...................................... 4

APPLICATION DIAGRAMS...................................... 4

DIAGRAM 1: TYPICAL SETUP ..........................4

DIAGRAM 2: INTERNAL VIEW ..........................5

DIAGRAM 3: CONNECTOR PINOUTS ..............6

INSTALLING YOUR DA1506RT............................. 7

OPERATION ............................................................... 7

TROUBLESHOOTING GUIDE................................. 7

ALTINEX POLICIES .................................................. 7

LIMITED WARRANTY/RETURN POLICIES .......7

CONTACT INFORMATION ................................7

400-0016-004 1

DISTRIBUTION AMPLIFIERS

PRECAUTIONS / SAFETY WARNINGS 1

Please read this manual carefully before using your

DA1506RT Distribution Amplifier. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your

DA1506RT and to prevent fire and shock hazards.

Please read them carefully and heed all warnings.

1.1 GENERAL

•

Qualified ALTINEX service personnel or its authorized representatives must perform all service.

1.2. RACK-MOUNTING SAFETY GUIDELINES

•

The maximum operating ambient temperature for this unit is 35°C.

•

Distribute units evenly inside the rack.

Hazardous conditions may be created by an uneven weight distribution.

•

Connect the unit to a properly rated circuit.

•

Reliable grounding should be maintained.

1.3 HANDLING

•

For best results, place the DA1506RT on a flat, level surface in a dry area away from dust and moisture.

•

To prevent fire or shock, do not expose this unit to water or moisture. Do not place the

DA1506RT in direct sunlight, near heaters or heat-radiating appliances, or near any liquid.

Exposure to direct sunlight, smoke, or steam can harm internal components.

•

Handle the DA1506RT carefully. Dropping or jarring can damage internal components.

•

Do not place heavy objects on top of the

DA1506RT. If the DA1506RT is to be mounted to a table or wall, use only ALTINEX-made mounting accessories.

•

To turn off the main power, be sure to remove the power cord. The power outlet should be installed as near to the equipment as possible, and should be easily accessible.

•

Do not pull any cables that are attached to the

DA1506RT.

•

If the DA1506RT is not used for an extended period, disconnect the power cord.

1.4 CLEANING

•

Unplug the DA1506RT before cleaning.

•

Clean only with a dry cloth. Never use strong detergents or solvents such as alcohol or thinner. Do not use a wet cloth or water to clean the unit. Do not open the unit to clean.

1.4 FCC NOTICE

•

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

•

This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

•

Any changes or modifications to the unit not expressly approved by ALTINEX, Inc. could void the user’s authority to operate the equipment.

400-0016-004 2

DISTRIBUTION AMPLIFIERS

ABOUT YOUR DA1506RT

DA1506RT

2-In, 6-Out Distribution Amplifier (DA)

2

The DA1506RT is a 2-In, 6-Out VGA through

UXGA distribution amplifier (DA). It is designed to connect 1 of 2 computer video sources to as many as 6 monitors, displays, and projectors.

The rear panel of the DA1506RT has 1 computer input and 6 outputs, while the front panel has a single input. If both the front and rear inputs have valid video signals, the image from the front panel will be displayed on the 6 outputs. The rear input can be permanently connected for normal operation and the front panel input can be saved for special applications. For example, a desktop PC is permanently connected to the rear panel along with the display devices. The image from a second source, like a laptop, may be connected to the front panel and temporarily override the desktop’s image. The DA1506DT will automatically switch to the front panel’s image.

Though primarily designed for use with displays using 15-pin HD (VGA-type) connectors, the

DA1506RT can pass RGBHV, RGBS, and RGsB format signals using adapter cables. The

DA1506RT is great for desktop use, but can also be rack-mounted using optional ALTINEX hardware.

TECHNICAL SPECIFICATIONS

Specifications are subject to change.

See www.altinex.com

for up-to-date information.

FEATURES/

DESCRIPTION

GENERAL

Input Connectors

Output Connectors

Compatibility

DA1506RT

15-pin HD female (2)

15-pin HD female (6)

VGA through UXGA,

RGBHV, RGBS,

RGsB, and RsGsBs

3

Table 1. DA1506RT General

MECHANICAL

Material

Finish

Height (inches)

Width (inches)

Depth (inches)

Weight (pounds)

T

°

Operating

T

°

Maximum

Humidity

MTBF (calculations)

DA1506RT

0.1” Al

Gray

1.75 in (44mm)

8.50 in (216mm)

4.50 in (114mm)

2.0 lb (0.91 kg)

10

°

C-35

°

C

50

°

C

90

% non-condensing

40,000 hrs

Table 2. DA1506RT Mechanical

ELECTRICAL

Input Video Signal

Analog Signal

Impedance

Input Sync Signal

Horiz/Vert/Composite Sync

Sync on Green

Impedance

Output Video Signals

Analog Signal

Impedance

Output Sync Signal

Horiz/Vert/Composite Sync

Sync on Green

Impedance

Coupling

Power

External adapter (included)

Total Power

Table 3. DA1506RT Electrical

DA1506RT

1.5 Vp-p max

75 ohms

TTL(+/-)

-0.3V

10 kohms

0 dB +/-0.5 dB

75 ohm

TTL(+/-)

-0.3 V

75 ohms

DC

9 VDC 500 mA

2.5W max.

400-0016-004 3

DISTRIBUTION AMPLIFIERS

4 PRODUCT DESCRIPTION

FRONT VIEW

INPUT1

OUTPUTS 1-6

REAR VIEW

APPLICATION DIAGRAMS

DIAGRAM 1: TYPICAL SETUP

5

INPUT2

DA1506RT

POWER

400-0016-004 4

DIAGRAM 2: INTERNAL VIEW

2-IN 6-OUT VGA-XGA DA

DISTRIBUTION AMPLIFIERS

FRONT

15-PIN HD

BACK

PLUG AND PLAY AUTO SWITCH

PLUG AND PLAY

SIGNAL

DETECT

POWER

9V, 0.5A

PS

POWER

OUT 1

OUT 2

OUT 3

OUT 4

OUT 5

OUT 6

15-PIN HD

400-0016-004 5

DIAGRAM 3: CONNECTOR PINOUTS

Pin No.

10

11

8

9

12

13

14

15

5

6

7

3

4

1

2

INPUT CONNECTORS

PIN ASSIGNMENTS

Red

Green

Blue

Ground

Ground

Ground

Ground

Ground

VESA +5V IN

Ground

Ground

VESA SDA

Horizontal Sync

Vertical Sync

VESA SCL

Table 4. The DA1506RT Input Pins

DISTRIBUTION AMPLIFIERS

Pin No.

10

11

8

9

12

13

14

15

5

6

7

3

4

1

2

OUTPUT CONNECTORS

PIN ASSIGNMENTS

Red

Green

Blue

No Connection

Ground

Ground

Ground

Ground

+5V

Ground

No Connection

No Connection

Horizontal Sync

Vertical Sync

No Connection

Table 5. The DA1506RT Output Pins

400-0016-004 6

DISTRIBUTION AMPLIFIERS

INSTALLING YOUR DA1506RT 6

Step 1. Plug the power adapter into an AC receptacle.

Step 2. Connect the power to the unit. The power indicator LEDs on the front and back panels will turn on and red. This indicates that the unit is operational.

Step 3. Connect a VGA-type cable from a computer to Input 2 on the amplifier’s rear panel. The LEDs will remain red, but the images will be present on the output connectors.

Step 4. Connect a VGA-type cable from another

PC or laptop to Input 1 on the amplifier’s front panel. If there is a signal present on

Input 1, then the LEDs will turn green indicating that Input 1’s image is the image present on the output connectors.

Step 5. Connect the output connectors of the amplifier to your display devices: monitors, projectors, LCDs, etc.

Step 6. If the image is less than perfect, check all of the connections. Poor quality cables may often degrade the performance of the product. Make sure that the cables used are coaxial cables and that all pins are in good condition.

OPERATION 7

There are no adjustments necessary to operate the unit. The DA1506RT will operate successfully as long as cables are attached properly and other technical specifications are followed.

TROUBLESHOOTING GUIDE 8

We have carefully tested and found no problems in the supplied DA1506RT; however, we would like to offer suggestions for the following:

•

Please make sure that the input amplitude of analog signal is less than 1.5 Vp-p.

•

Please use the ALTINEX-supplied external adapter (9V, 500mA).

•

Please make sure that proper quality of cables is used. We recommend ALTINEX-made cables for best results.

•

If a problem arises after continuous usage at higher voltage, higher temperature, higher humidity, or at other extreme environmental conditions, please make the necessary adjustments for the DA1506RT to function safely and properly.

ALTINEX POLICIES 9

9.1 LIMITED WARRANTY/RETURN POLICIES

Please see the ALTINEX website at www.altinex.com

for details on warranty and return policies.

9.2 CONTACT INFORMATION

ALTINEX, Inc.

592 Apollo Street

Brea, CA 92821 USA

TEL: 714 990-2300

TOLL FREE: 1-800-ALTINEX

WEB: www.altinex.com

E-MAIL: [email protected]

400-0016-004 7