Kuryakyn 9017 Rear Fender Trim Installation Instructions
Kuryakyn 9017
The Kuryakyn 9017 Rear Fender Trim is a stylish and functional accessory for your GL 1800 motorcycle. Made from high-quality materials, this trim piece is designed to protect your fender from scratches and wear while also enhancing the overall look of your bike.
The 9017 Rear Fender Trim is easy to install, with no drilling or cutting required. Simply clean the surface of your fender, remove the adhesive backing, and press the trim piece into place. The adhesive will bond securely within 24 hours, providing a strong and lasting hold.
In addition to its protective and aesthetic benefits, the 9017 Rear Fender Trim can also help to reduce drag and improve fuel economy. By streamlining the airflow around your fender, this trim piece can help your motorcycle to run more efficiently.
Advertisement
Advertisement
INSTALLATION
REAR FENDER TRIM for GL 1800 9017
PARTS INCLUDED
1
1
Rear Fender Trim with Adhesive Applied
Installation Instructions
Please read and understand entire instructions before starting installation.
THANK YOU FOR CHOOSING K
ϋ
RYAKYN!
IN ORDER TO PROTECT YOU AND OTHERS FROM POSSIBLE INJURY AND/OR
CUSTOMER SERVICE
877.370.3604 (toll free)
INSTALLATION QUESTIONS [email protected] or call 715.247.2983
LIMITED WARRANTY
Küryakyn warrants that any Küryakyn products sold hereunder, shall be free of defects in materials and workmanship for a period of one
(1) year from the date of purchase by the consumer excepting the following provisions:
● Küryakyn shall have no obligation in the event
PROPERTY DAMAGE OR LOSS, PLEASE PAY CLOSE ATTENTION TO ALL
INSTRUCTIONS, WARNINGS, CAUTIONS AND ATTENTION NOTES REGARDING
THE USE AND CARE OF THIS PRODUCT.
ATTENTION!
This indication alerts you to the fact that ignoring the contents described herein may negatively affect product performance and functionality.
STRICTLY OBSERVE THE FOLLOWING GUIDELINES IN ORDER TO USE THE the customer is unable to provide a receipt showing the date the customer purchased the product(s).
● The product must be properly installed, maintained and operated under normal conditions.
● Küryakyn makes no warranty, expressed or implied, with respect to any gold plated products.
● Küryakyn shall not be liable for any consequential and incidental damages, including labor and paint, resulting from failure of a
PRODUCT PROPERLY AND AVOID POTENTIALLY DANGEROUS ACCIDENTS.
STEP 1
STEP 2
Read and understand all steps in the instructions before starting the installation. Park the motorcycle on a hard, level surface and turn off the ignition.
Remove any grease or debris from the rear fender with soapy water and a clean rag; allow the area to dry completely.
ATTENTION!
Ensure the area of installation is free of grease, oil, dirt or other debris to ensure proper adhesion. Küryakyn WILL NOT issue a warranty on any parts lost due to improper installation .
ATTENTION!
The adhesive will not bond correctly if applied at temperatures
Küryakyn product, failure to deliver, delay in delivery, delivery in nonconforming condition, or for any breech of contract or duty between
Küryakyn and a customer.
● Küryakyn products are often intended for use in specific applications. Küryakyn makes no warranty if a Küryakyn product is used in applications other than intended.
● Küryakyn electrical products are warranted for one (1) year from the date of purchase by the consumer. L.E.D.’S contained in components of
Küryakyn products will be warranted for defects in materials and workmanship for 3 years from the date of purchase where as all other components shall be warranted for one(1) year.
This includes, but is not limited to; control modules, wiring, chrome & other components.
● Küryakyn makes no warranty of any kind in regard to other manufacturer¹s products distributed by Küryakyn. Küryakyn will pass on all warranties made by the manufacturer and where possible, will expedite the claim on behalf of the customer, but ultimately, responsibility for
STEP 3
less than 50°F. Do not attempt this installation in temperatures less than 50°F.
Test fit the Rear Fender Trim.
Make any reference marks with a non-permanent marker or masking tape. Rub the backing on the adhesive strip to activate the adhesive before applying.
Remove the adhesive backing.
Press the Rear Fender Trim into
PIC 1 disposition of the warranty claim lies with the manufacturer.
ABOUT OUR CATALOG
For purchasing Küryakyn® products, you can receive a complete catalog free of charge.
Send the Proof-of-Purchase below with your address to: Küryakyn, P.O. Box 339,
Somerset, WI 54025.
Please indicate either Accessories Catalog for
Harley-Davidson® or GL & Metric Cruisers.
Be sure to ask your local dealer about other
Küryakyn® products, the motorcycle parts and accessories designed for riders by riders.
©2005 Küryakyn USA® All Rights reserved. place for one minute to ensure proper adhesion. Full bond strength will occur within 24 hours. PIC 1
9017-21GL-0911
Ride On!

Public link updated
The public link to your chat has been updated.
Advertisement