IR Camera Operating Instruction PZ0011 PZ0012

IR Camera Operating Instruction PZ0011 PZ0012
DIMENSION
IR Camera
75.0mm
Operating Instruction
M o d e l N O : PZ0011 / PZ0012
93.0mm
INSTALLATION
1
2
Holder
Spherical
Object
Loop Lock
3
Thank you for your purchase of this product. Before
operating the unit, please read this instruction manual
carefully to ensure proper use of the product. Please
store this instruction manual in a safe place for future
reference after you have read it.
PRODUCT FEATURE
1.20 Built-in Infrared Lights
2.Electronic Shutter Control
3.Auto White Balance
4.High Picture Quality
CAUTION FOR SAFE OPERATION
1. Power supply
(1) Use only with a 12V DC power supply
(2) Be sure to connect each lead to the appropriate terminal.
Wrong connection may cause malfunction and /or damage
to the video camera.
2. Operating and storage locations
(1) Do not attempt to aim the camera at the sun or other
extremely bright objects that cause smear to appear
irrespective of whether the camera is operating or not.
This can damage the CCD (Charge Coupled Device).
(2) Do not place the camera in the following locations.
① Locations subjected to extremely high or low
temperatures.
② Locations subjected to high levels of humidity and dust.
③ Locations where there are large amounts of water
vapor and steam.
④ Locations subjected to excessive vibrations.
(3) When this camera is installed near the equipment like
wireless communication device which emits strong
electromagnetic field, some irregularity such as noise on
monitor Screen may happen.
(4) When plugging the power cord to and electric outlet, be
sure to leave enough space around the outlet for easy
access to the outlet for later turning the power on and off.
3. Handing of the unit
Do not allow the camera to be subjected to strong impacts or
shocks.The camera could be damaged by improper handing
or storage.
Never attempt to disassemble or modify the camera.
If an abnormality should happen to occur, immediately
turn off the power and consult your dealer.
4
Video LinePower Line
Screw Hole
1、Take hold of the spherical object and take it out.
2、Hold the Loop Lock on the base, and squeeze it hardly
inward to separate the holder from the base.
3、Use screws to install the base to the place it needs.
4、Install the spherical object and its holder to the base
and adjust the lens to the right angle.
AVAILABLE MODELS
Serson
1/4 SHARP CCD
1/4 SHARP CCD
Model No
Pz0011
Pz0011
1/3 SONY CCD
Pz0012
TV Lines
4 20 TV Line
4 80 TV Line
4 50TV Line
5 40 TV Line
SPECIFICATIONS
TV System
Sync System
Mini Illumination
White Balance
Model
Range
PAL/NTSC
Internal
0Lux
AUTO
3200~10000 K
Gain Control
AUTO
S/N Ratio
>50dB
Electronic Shutter
Video Out
Gamma Correction
Lens
Operation Temp
Dimensions
1 / 5 0 ~ 1 / 1 2 , 0 0 0 second
Composite output 1.0V p-p at 75 odm
0.45
3.6/6mm
-10 C~50 C
7 5 m m ( H ) * 9 3 mm (
Power
DC12V
IR range
20m
Weight
30 0 g
)
* Design and specifications are subject to change without notice.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement