8T Series
MIL-DTL-38999 Series II
8T Series
MIL-DTL-38999 Series II
Contents
Overview
Common Section
• 8T Series - Presentation ................................................. 06
• Orientation .......................................................................... 26
• 8T Series - Applications ................................................. 06
• Contacts .............................................................................. 27
• A universal product platform ........................................ 07
• Tooling .................................................................................. 28
• Space saving ...................................................................... 08
• Wiring instructions ............................................................ 29
• Box solutions ...................................................................... 08
• Backshells ........................................................................... 30
• Shell types ........................................................................... 08
• Metalic protective caps .................................................. 36
• Features by shell types ................................................... 09
• Gaskets ................................................................................ 37
• Contact layouts ................................................................. 10
• Dummy receptacles ........................................................ 37
• Contact layouts (matrix) ................................................... 12
• Coordinates for straight PC tail terminations ........... 38
• Cross reference list ........................................................... 13
Range Extension
Standard Series
• Box mount interconnect solutions .............................. 48
• Technical features ............................................................. 16
• Rack & panel ...................................................................... 48
• Ordering information ........................................................ 17
• microComp® Series ......................................................... 49
• Dimensions ......................................................................... 19
• Double flange .................................................................... 49
• Receptacle with straight PC tail contacts .................. 23
• Integrated clinch nut ....................................................... 50
• Mated/unmated connectors ......................................... 23
• PCB contact without shoulder ...................................... 50
© 2013 - SOURIAU
3
8T Series
Overview
8T Series - Presentation .................................................................................................................
06
8T Series - Applications .................................................................................................................
06
A universal product platform ........................................................................................................
07
Space saving ......................................................................................................................................
08
Box solutions .....................................................................................................................................
08
Shell types ..........................................................................................................................................
08
Features by shell types ...................................................................................................................
09
Contact layouts .................................................................................................................................
10
Contact layouts (matrix) ..................................................................................................................
12
Cross reference list ..........................................................................................................................
13
8T Series
MIL-DTL-38999 Series II
8T Series - Presentation
38999 bayonet circular connector for more compacity
38999 Series II: 8T Series
The design and performances of the 8T connectors meet
the most severe requirements set for applications in military
and civil aerospace. With the increasing requirement for low
profile and EMI shielding, SOURIAU has more than doubled
its 8T range.
It features:
► Lower profile design: Lightweight, space saving (30% shorter compared to 8LT)
► High reliability: EMI shielding, excellent shock vibration & fluid resistance, QPL approuved
► A high contact density: From 1 to 128 contacts
► A wide range: RoHS plating available (black zinc nickel), 11 different shells available, 43 layouts available
from size 8 to 24
► Size 22D, 20, 16 and 12 crimp contacts with rear release and a retainer metallic clip for retention
in the insulator
► Bayonet quick coupling
► Shell orientation by means of polarizing keys (master key)
8T Series - Applications
• Civil and Military Aerospace
• Marine Equipment
• Communications Equipement
• Medical Instrumentation
• Ballistic Missiles & Weapon Systems
• Armored Carriers & Tanks
• Test Equipment
6
© 2013 - SOURIAU
8T Series
MIL-DTL-38999 Series II
A universal product platform: MIL-DTL-38999
38999 Series I: 8LT Series
► High density (#22D) MIL-spec circular
► Scoop proof
► Coupling system: Bayonet
► Method of mounting: screws or jam nut
► Shell: Aluminum alloy
► Plating: olive green cadmium, black zinc
nickel or nickel
► QPL approved
► Numerous layouts
38999 Series III: 8D Series
► High density MIL-spec circular
► Scoop proof, fast screw coupling
► Composite light-weight version available
► QPL approved
► Titanium version, light-weight, mechanical
and environnemental performances
► Quadrax and Elio version
► Specific versions (clinch nuts, double flange,
high power, hermetic, ...)
A universal product platform: VG96912 & JN1003
8ST Series
► High density - same layouts as 38999 Series
► Lightweight version of Series I
► Scoop proof, bayonet coupling
► Method of mounting: screws or jam nut
► Shell: Aluminum alloy
► Plating: olive green cadmium, black zinc
I
nickel or nickel
► VG 96912 German specification
► JN 1003 Typhoon specification
© 2013 - SOURIAU
7
8T Series
MIL-DTL-38999 Series II
Space saving
Box solutions
Shell size comparison 8T / 8LT
8T
38999 Series lI
8LT
38999 Series l
Example: 8T15
Example: 8LT15
8T shorter for all shell types
compared to 8LT !
► Jam nut
► Rear mounting
► Front mounting
► Integrated backshell
Shell types
Plugs
Receptacles
8T5
Square flange receptacle
Front mounting
Rear mounting
In line receptacle
MS27484T
With grounding ring
8T6
MS27473T
8T0
MS27472T
8T3
MS27497T
8T1
Without grounding ring
Jam nut receptacle
8T15
MS27484E
With grounding ring
8T4
MS27499E
8T2
MS27508E
8T16
MS27473E
Without grounding ring
8T10
MS27472E
8
© 2013 - SOURIAU
8T7
MS27474T
8T Series
MIL-DTL-38999 Series II
Features by shell types
From your need ...
Short
grommet
Integrated backshell
With accessory threads





Receptacle
Plug
Receptacle
Plug
Receptacle











Square
flange
+
Rear
mounting
Square
flange
+
Front
mounting
With
grounding
ring
Without
grounding
ring
Square
flange
+
Front
mounting
With
grounding
ring
Without
grounding
ring
Square
flange
+
Front
mounting
Square
flange
+
Rear
mounting
In line
Jam nut
8T2
8T4
8T15
8T16
8T10
8T5
8T6
8T0
8T3
8T1
8T7
... to our solution !
A versatile range available !
© 2013 - SOURIAU
9
8T Series
MIL-DTL-38999 Series II
Contact layouts
08
35
10
98
05*
35
98
Contact #22D
99
Contact #20
Contact #16
6#22D
3#20
5#20
13#22D
6#20
7#20
Service M
Service I
Service I
Service M
Service I
Service I
Contact #12
12
03
04*
08**
26*
35
98
3#16
4#16
8#20
22#22D
10#20
Service I
Service I
Service I
6#22D
2#12
Service M
Service M
Service I
05*
15*
18*
19*
35
97*
5#16
14#20
1#16
Service I
18#20
19#20
37#22D
Service I
Service I
Service M
8#20
4#16
Service I
06
08*
26*
35
99
6#12
or 6#12 Coax
Service I
8#16
26#20
55#22D
Service II
Service I
Service M
2#16
21#20
Service I
14
Service II
16
* Layout not available on 8T2 & 8T4 (short grommet). On demand only, please consult us.
** Layout not available on 8T2 & 8T4 (short grommet) / Layout available on other types (long
grommet) but only with male insert. For female version or short grommet, please consult us.
10
© 2013 - SOURIAU
8T Series
MIL-DTL-38999 Series II
Contact layouts
18
11*
28
32
Contact #22D
35
Contact #20
Contact #16
Contact #12
11#16
26#20
2#16
Service I
32#20
66#22D
Service I
Service M
11*
16
35
39
41
11#12
16#16
79#22D
41#20
Service I
Service II
Service M
37#20
2#16
Service I
21*
32
35
53*
55
21#16
32#20
100#22D
53#20
55#20
Service II
Service I
Service M
Service I
Service I
04
19*
24*
29*
35
61*
48#20
8#16
Service I
19#12
12#12
12#16
Service I
29#16
128#22D
61#20
Service I
Service M
Service I
Service II
20
Service I
22
24
Service I
* Layout not available on 8T2 & 8T4 (short grommet). On demand only, please consult us.
© 2013 - SOURIAU
11
8T Series
MIL-DTL-38999 Series II
Contact layouts (matrix)
Shell Size
08
10
12
14
16
18
20
22
24
3
Layout
Service
8T
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
08-35
M
08-98
I
10-05
I
10-35
M
10-98
I
10-99
I
12-03
I
12-04
I
12-08
I
12-26
M
12-35
M
12-98
I
14-05
II
14-15
I
14-18
I
14-19
I
14-35
M
14-97
I
16-06
I
16-08
II
16-26
I
16-35
M
16-99
I
18-11
II
18-28
I
18-32
I
18-35
M
20-11
I
20-16
II
20-35
M
20-39
I
20-41
I
22-21
II
22-32
I
22-35
M
22-53
I
22-55
I
24-04
I
24-19
I
24-24
II
24-29
I
24-35
M
24-61
I
Souriau’s layout
Q
Souriau’s layout & layout according to corresponding norm
(1)
Not qualified for short grommet version (8T2 & 8T4)
(2)
Not qualified for 8T4 short grommet version
12
© 2013 - SOURIAU
MIL-DTL-38999
(QPL)
HE309
Number of
Contacts
#22D
Q
Q
6
6
Q
Q
3
3
5
5
Q (1)
#20
#16
Q
Q
13
Q
Q
6
6
Q
7
7
Q
3
3
4
4
Q (1)
Q
Q
13
8
8
8
6
22
Q
Q
22
Q
Q
10
Q (1)
Q
5
2
10
5
Q (1)
15
14
Q
18
18
Q
19
19
Q
Q
37
Q
Q
12
8
Q
Q
6
6 or 6 Coax
Q (1)
Q
8
Q (1)
Q
26
Q
Q
55
Q
Q
23
Q (1)
Q
11
Q
1
37
4
8
26
55
21
2
11
28
26
Q
Q
32
32
Q
Q
66
2
66
11
Q
Q
11
16
16
Q
Q
79
Q (2)
Q
39
37
Q
Q
41
41
Q (1)
Q
Q
Q
53
53
55
55
56
48
100
8
19
19
24
Q
29
Q
Q
128
Q (1)
Q
61
(1)
21
100
Q
2
32
Q
Q (1)
Q
21
Q
Q
Q (1)
79
32
Q
#12
12
29
128
61
12
8T Series
MIL-DTL-38999 Series II
Cross reference list
Souriau
Designation
MIL-DTL-38999 Series II
Shell size
Contact layout
Orientation
Shell size
Contact layout
Orientation
NFC 93422 HE309
Shell size &
Contact layout
Orientation
8TX••X••X/X•
MSXXXXXX••X••X/X•
HE309XXX••••X/X•XX
Square flange
receptacle
8T0••B••P/S•
8T0••F••P/S•
8T0••C••P/S•
MS27472T••B••P/S•
MS27472T••F••P/S•
MS27472T••C••P/S•
HE30900T••••P/S•7M
HE30900T••••P/S•6M
HE30900T••••P/S•8M
In line
receptacle
8T1••B••P/S•
8T1••F••P/S•
8T1••C••P/S•
-
-
Square flange receptacle
not accepting backshells
(rear mounting)
8T2••B••P/S•
8T2••F••P/S•
8T2••C••P/S•
MS27508E••B••P/S•
MS27508E••F••P/S•
MS27508E••C••P/S•
HE30905T••••P/S•7M
HE30905T••••P/S•6M
HE30905T••••P/S•8M
Square flange receptacle
(rear mounting)
8T3••B••P/S•
8T3••F••P/S•
8T3••C••P/S•
MS27497T••B••P/S•
MS27497T••F••P/S•
MS27497T••C••P/S•
HE30903T••••P/S•7M
HE30903T••••P/S•6M
HE30903T••••P/S•8M
Square flange receptacle
not accepting backshells
8T4••B••P/S•
8T4••F••P/S•
8T4••C••P/S•
MS27499E••B••P/S•
MS27499E••F••P/S•
MS27499E••C••P/S•
HE30902T••••P/S•7M
HE30902T••••P/S•6M
HE30902T••••P/S•8M
Plug
with RFI shielding
8T5••B••P/S•
8T5••F••P/S•
8T5••C••P/S•
MS27484T••B••P/S•
MS27484T••F••P/S•
MS27484T••C••P/S•
HE309G6T••••P/S•7M
HE309G6T••••P/S•6M
HE309G6T••••P/S•8M
Plug
without RFI shielding
8T6••B••P/S•
8T6••F••P/S•
8T6••C••P/S•
MS27473T••B••P/S•
MS27473T••F••P/S•
MS27473T••C••P/S•
HE30906T••••P/S•7M
HE30906T••••P/S•6M
HE30906T••••P/S•8M
Jam nut
receptacle
8T7••B••P/S•
8T7••F••P/S•
8T7••C••P/S•
MS27474T••B••P/S•
MS27474T••F••P/S•
MS27474T••C••P/S•
HE30907T••••P/S•7M
HE30907T••••P/S•6M
HE30907T••••P/S•8M
Square flange receptacle
not accepting backshells
(rear milling)
8T10••B••P/S•
8T10••F••P/S•
8T10••C••P/S•
MS27472E••B••P/S•
MS27472E••F••P/S•
MS27472E••C••P/S•
-
Plug with RFI shielding
not accepting backshells
(rear milling)
8T15••B••P/S•
8T15••F••P/S•
8T15••C••P/S•
MS27484E••B••P/S•
MS27484E••F••P/S•
MS27484E••C••P/S•
-
Plug without RFI shielding
not accepting backshells
(rear milling)
8T16••B••P/S•
8T16••F••P/S•
8T16••C••P/S•
MS27473E••B••P/S•
MS27473E••F••P/S•
MS27473E••C••P/S•
-
Backshells
8LST•••B01
8LST•••F01
M85049/27••W
M85049/27••N
-
© 2013 - SOURIAU
13
8T Series
Standard Series
Technical features ............................................................................................................................
16
Ordering information .......................................................................................................................
17
Dimensions:
Plugs: 8T5, 8T15, 8T6 & 8T16 types ...................................................................................
In line receptacle: 8T1 type ...................................................................................................
Jam nut receptacle: 8T7 type ................................................................................................
Square flange receptacles: 8T0, 8T2, 8T3, 8T4 & 8T10 types ..................................
19
20
20
21
Receptacle with straight PC tail contacts ..................................................................................
23
Mated/unmated connectors .........................................................................................................
23
8T Series
MIL-DTL-38999 Series II
Description
• Low profile / Not scoop proof
• Bayonet locking system
• 11 shell types
• 43 layouts
• High density connector from 1 to 128
contacts
• An excellent shock vibration and fluid
resistance solution
• QPL qualified
• Standards:
- MIL-C 38999 Series II
- NFC 93422 HE 309
- VG 96912 Series II
- PAN 6433-1
- BS 9522 N 003
Applications
• Vibration:
Random 100 to 1000Hz - 1g2/Hz
Environmental
• Civil and military aerospace
• Contact retention (mini force in N):
Size 22D: 44N Size 16: 110N
Size 20: 67N Size 12: 110N
• Temperature range:
Zinc nickel plating (Z):
Cadmium plating (B):
Nickel plating (F):
Hard anodized (C):
Electrical
• Sealing (mated connectors):
Differential pressure 1 bar
Leakage ≤ 8cm3/h
• Communications equipments
• Ballistic missiles & weapon systems
• Medical instrumentation
Technical Features
Mechanical
• Shell: Aluminum alloy
• Test voltage (Vrms):
Service
M
I
II
Sea level
1300
1800
2300
• Plating:
Black zinc nickel (Z)
Nickel (F)
Olive green cadmium (B)
Hard anodized (C)
• Contact resistance:
Size 22D: 14.6mΩ
Size 20: 7.3mΩ
Size 16: 3.8mΩ
Size 12: 3.5mΩ
• Insulator: Thermoplastic
• Insulation resistance:
≥ 5000MΩ (at 500Vdc)
• Grommet and seal: Silicone elastomer
• Contact: Copper alloy
• Plating: Gold over nickel
• Endurance:
500 mating cycles
• Shock: 300g, 3ms duration
16
© 2013 - SOURIAU
• Contact rating:
Size 22D: 5A
Size 20: 7.5A
at 21 000 m
800
1000
1000
Size 16: 13A
Size 12: 23A
• Shell continuity (with EMI ring):
Black zinc nickel plating: 2.5mΩ
Olive green plating: 2.5mΩ
Nickel plating: 1mΩ
-65°C +175°C
-65°C +175°C
-65°C +200°C
-65°C +200°C
• Salt spray to:
MIL-STD 1344 method 1001:
. 500 hours (plating B & Z)
. 48 hours (plating F & C)
NFC 93422: 48 hours (plating F & C)
• Damp heat:
MIL-C 38999: 10 cycles (24 hours)
NFC 93422: 56 days
• Resistance to fluids:
To MIL-L 38999:
MIL-L 7808, MIL-L 23699, MIL-H 5606,
MIL-A 8243, MIL-L 25769, MIL-G 3056,
MIL-T 5624 (JP5); hydraulic fluids; solvents
To NFC 93422:
F 46, F 54, 0/180, H 515, H 542, XH 45
8T Series
MIL-DTL-38999 Series II
Ordering information
Souriau - Part numbers
Basic Series
8T
0
-
14
B
35
P
N
Shell type:
0: Square flange receptacle (front mount with accessory threads)
1: In line receptacle (with accessory threads)
2: Square flange receptacle (rear mount without accessory threads)
3: Square flange receptacle (rear mount with accessory threads)
4: Square flange receptacle (front mount without accessory threads)
5: Plug with RFI shielding
6: Plug without RFI shielding
7: Jam nut receptacle (with accessory threads)
10: Square flange receptacle (front mount, rear knurling)
15: Plug with RFI shielding (rear knurling)
16: Plug without RFI shielding (rear knurling)
Contact style: (for more information please see page 27)
-: Connectors with standard crimp contacts
L: Receptacle with long PC tail
C: Receptacle with short PC tail
P: Receptacle with solder cup
Shell size: 08; 10; 12; 14; 16; 18; 20; 22; 24
Plating:
Z: Black zinc nickel
F: Nickel
B: Olive drab cadmium
C: Hard anodized
Contact layout: See pages 10 to 12
Contact type:
P: Pin
S: Socket
A: Connector supplied less pin contact or with specific contacts (connector marking : A + orientation)
B: Female connector without contact or with special contacts (connector marking : B + orientation)
Orientation: N, A, B, C & D
Special custom:
None: Standard plastic cap
M: Antistatic plastic cap
L: For P and S contact type only, connector delivered without contacts, connector marking P or S (without L)
© 2013 - SOURIAU
17
8T Series
MIL-DTL-38999 Series II
MIL-DTL-38999 Series II - Part numbers
Basic Series
MS
27497T
14
B
35
P
N
Shell type & Class:
27472T: Square flange receptacle (front mount with accessory threads)
27508E: Square flange receptacle (rear mount without accessory threads)
27497T: Square flange receptacle (rear mount with accessory threads)
27499E: Square flange receptacle (front mount without accessory threads)
27484T: Plug with RFI shielding
27473T: Plug without RFI shielding
27474T: Jam nut receptacle (with accessory threads)
27472E: Square flange receptacle (front mount, rear knurling)
27484E: Plug with RFI shielding (rear knurling)
27473E: Plug without RFI shielding (rear knurling)
Shell size: 08; 10; 12; 14; 16; 18; 20; 22; 24
Plating:
Z: Black zinc nickel
B: Olive drab cadmium
F: Nickel
Contact layout: See pages 10 to 12
Contact type:
P: Pin
S: Socket
A: Connector supplied less pin contact or with specific contacts (connector marking : A + orientation)
B: Female connector without contact or with special contacts (connector marking : B + orientation)
Orientation: N, A, B, C & D
L: For P and S contact type only, connector delivered without contacts, connector marking P or S (without L)
HE309 Series - Part numbers
Basic Series
Shell type:
03: Square flange receptacle with thread for back fitting
05: Square flange receptacle without thread for back fitting
06: Plug without RFI shielding
07: Jam nut receptacle
Class:
T: Sealed
Shell size: 08; 10; 12; 14; 16; 18; 20; 22; 24
Contact layout: See pages 10 to 12
Contact type:
P: Pin
S: Socket
Orientation: N, A, B, C & D
Plating:
6: Nickel
7: Olive drab cadmium
8: Hard anodized
Specification
-: Connector delivered with contacts
L: Connector delivered without contacts
18
© 2013 - SOURIAU
HE309
03
T
10
35
P
N
6
L
8T Series
MIL-DTL-38999 Series II
Dimensions
Plug 8T5 type & 8T15 type
A
ØB
C
8T5 type
Plug with
accessories thread,
with grounding ring
8T15 type
Plug with
integrated backshell,
with grounding ring
8T5 type
Shell size
A
8T15 type
08
10
12
14
16
18
20
22
24
Min.
21.26
21.26
21.26
21.26
21.26
21.26
21.26
21.26
21.26
Max.
22.59
22.59
22.59
22.59
22.59
22.59
22.59
22.59
22.59
21.73
24.87
28.93
32.43
35.63
38.43
41.10
44.78
47.93
Min.
23.38
23.38
23.38
23.38
23.38
23.38
23.38
23.38
23.38
Max.
23.57
23.57
23.57
23.57
23.57
23.57
23.57
23.57
23.57
ØB
C
8T5/8T15 types
Plug 8T6 type & 8T16 type
A
ØB
C
8T6 type
Plug with
accessories thread,
without grounding ring
8T16 type
Plug with
integrated backshell,
without grounding ring
8T6 type
Shell size
A
Min.
Max.
8T16 type
08
10
12
14
16
18
20
22
24
21.31
21.31
21.31
21.31
21.31
21.31
21.31
21.31
21.31
22.65
22.65
22.65
22.65
22.65
22.65
22.65
22.65
22.65
19.03
21.78
26.13
29.33
32.48
35.28
38.83
41.63
44.83
Min.
23.43
23.43
23.43
23.43
23.43
23.43
23.43
23.43
23.43
Max.
23.63
23.63
23.63
23.63
23.63
23.63
23.63
23.63
23.63
ØB ±0.1
C
8T6/8T16 types
Note: All dimensions are in millimeters (mm).
© 2013 - SOURIAU
19
8T Series
MIL-DTL-38999 Series II
In-line receptacle 8T1 type
C
ØB
ØA
11.28 ±0.06 9.08 ±0.79
ØD
1.57 ±0.08
Shell size
ØA
08
±0.07
13.19
ØB ±0.08
11.96
14.38
17.80
C
±0.25
ØD ±0.27
8T1 type
In line receptacle
with accessories thread
10
12
14
16
18
20
22
24
16.14
20.43
23.65
26.78
14.93
19.00
22.17
25.35
29.95
33.13
36.30
39.50
28.52
31.70
34.87
38.05
18.68
21.98
25.38
27.58
31.11
34.38
37.78
41.78
22.10
25.40
28.80
31.00
34.40
37.80
41.20
45.20
Jam nut receptacle 8T7 type
D
E
Max. panel
thickness: 2.8
2.5 ±0.22
ØF
8T7 type
Jam nut receptacle
with accessories thread
Panel cut-out
Shell size
08
10
12
14
16
18
20
22
24
A ±0.12
11.13
11.13
11.13
11.13
11.13
11.13
11.79
11.79
11.79
B ±0.99
8.36
8.36
8.36
8.36
8.36
8.36
7.70
7.70
7.70
ØC ±0.08
12.01
14.98
19.05
22.22
25.40
28.57
31.75
34.92
38.10
D
27.40
30.61
33.75
36.96
40.10
43.31
46.45
51.23
54.41
E
31.85
35.02
38.20
41.37
45.34
48.10
51.30
54.46
57.63
35.05
38.24
41.42
44.59
49.36
51.35
54.50
57.55
60.85
0
G -0.25
21.08
24.26
27.53
30.68
33.86
37.06
40.03
43.21
46.38
ØH +0.25
0
22.46
25.58
28.80
31.98
35.15
38.28
41.50
44.68
47.85
Max tightening
torque (mN)
9
10
13
20
23
25
26
27
29
±0.37
ØF ±0.32
Note: All dimensions are in millimeters (mm).
20
ØH
G
B
ØC
A
© 2013 - SOURIAU
8T Series
MIL-DTL-38999 Series II
Square flange receptacle 8T0 type, 8T4 type & 8T10 type
8.12 ±0.07 12.25 ±0.79
8.12 ±0.07 13.85 ±0.05
8T0 type
Square flange
receptacle with
accessories thread,
front mounting
1.57 ±0.08
B
ØA
ØA
ØA
8.12 ±0.07 7.8
8T4 type
Square flange
receptacle with
short grommet,
front mounting
1.57 ±0.08
B
8T0 type
8T10 type
Square flange
receptacle with
integrated backshell,
front mounting
1.57 ±0.08
B
8T4 type
8T10 type
D
D
D
C
ØE
ØG
Panel cut-out
8T0/8T4/8T10 types
Shell size
ØA
±0.08
B Max.
C
12
14
16
18
20
22
24
12.96
14.93
19.00
22.17
25.35
28.52
31.70
34.87
38.05
3.71
3.71
3.71
3.71
3.71
3.71
4.27
4.27
4.27
Min.
20.52
23.73
26.11
28.50
30.86
33.22
36.42
39.60
42.77
21.03
24.23
26.59
28.98
31.34
33.73
36.91
40.08
43.26
15.09
18.26
20.62
23.01
24.61
26.97
29.36
31.75
34.93
3.08
3.08
3.08
3.08
3.08
3.08
3.08
3.08
3.71
Min.
Max.
ØF
ØG
10
Max.
D
ØE
08
±0.15
3.30
3.30
3.30
3.30
3.30
3.30
3.30
3.30
3.99
14.15
17.32
21.69
24.87
28.04
31.22
34.39
37.57
40.74
3.25
3.25
3.25
3.25
3.25
3.25
3.25
3.25
3.91
Note: All dimensions are in millimeters (mm).
© 2013 - SOURIAU
21
8T Series
MIL-DTL-38999 Series II
Square flange receptacle 8T2 type & 8T3 type
11.29 ±0.07 9.08 ±0.79
11.29 ±0.07
ØB
ØA
ØB
ØA
4.74
±0.12
8T2 type
Square flange
receptacle with
short grommet,
rear mounting
1.63 ±0.09
C
8T3 type
Square flange
receptacle with
accessories thread,
rear mounting
1.63 ±0.09
C
8T2 type
8T3 type
E
D
ØF
ØG
8T2/8T3 types
Shell size
08
10
±0.08
13.25
16.20
ØB ±0.09
12.02
14.99
ØA
C Max.
D
G
14
16
18
20
22
24
20.49
23.71
19.06
22.25
26.84
30.01
33.19
36.36
39.56
25.41
28.58
31.76
34.93
38.11
3.71
3.71
3.71
3.71
3.71
3.71
4.27
4.27
4.27
20.57
23.78
26.16
28.55
30.91
33.27
36.47
39.65
42.82
Max.
21.10
24.31
26.69
29.08
31.71
34.10
37.28
40.45
43.63
15.09
18.26
20.62
23.01
24.61
26.97
29.36
31.75
34.93
3.08
3.08
3.08
3.08
3.08
3.08
3.08
3.08
3.71
Min.
Max.
±0.15
ØH Min.
3.30
3.30
3.30
3.30
3.30
3.30
3.30
3.30
3.99
3.25
3.25
3.25
3.25
3.25
3.25
3.25
3.25
3.91
14.15
17.32
21.69
24.87
28.04
31.22
34.39
37.57
40.74
Note: All dimensions are in millimeters (mm).
22
Panel cut-out
Min.
E
ØF
12
H
E
E
Ø
© 2013 - SOURIAU
8T Series
MIL-DTL-38999 Series II
Receptacle with straight PC tail contacts
D
L
0
L -0.20
ØA
0
ØA -0.05
B
8T0/8T10
types
B
C
L
L
C
D
ØA
ØA
8T3 type
8T7 type
Contact style
Size
Type
#22D
M/F
#22D
M/F
#20 / #16 / #12 M / F
#22D / 20
M/F
#16
M/F
#12
M/F
#22D
M
#22D
F
#20 / #16
M
#12
M
#22D
M
#22D
F
#20 / #16
M
#12
M
#22D
M
#22D
F
#20 / #16
M
#12
M
Length
L
C
C
C/L
C/L
C/L
C/L
L
C
C
C/L
L
C
C
C/L
L
C
C
Shell size
08 to 18 20 to 24
8.50
4.00
5.10
0.70
1.15
2.05
15.05
15.05
15.22
15.22
13.40
13.40
13.57
13.57
13.61
12.95
13.61
12.95
13.78
13.12
13.78
M: Male contact, F: Female contact, C: Short PC tail, L: Long PC tail
Mated/unmated dimensions
8T7 type
8T1 type
8T2/8T3 types
8T0/8T4/8T10 types
with 8T5/8T15/8T6/8T16 types
with 8T5/8T15/8T6/8T16 types
with 8T5/8T15/8T6/8T16 types
with 8T5/8T15/8T6/8T16 types
A
A
A
A
B
B
B
B
8T1 type in-line receptacle
8T2/8T3 types square flange receptacle
8T7 type jam nut receptacle
Shell
size
With plug
8T5
A
Max.
B
Max.
With plug
8T6
A
Max.
B
Max.
With plug
8T15
A
Max.
B
Max.
With plug
8T16
A
Max.
B
Max.
08 to
18
27.68 33.86 27.74 33.92 28.65 34.83 28.71 34.89
20 to
24
28.34 34.52 28.40 34.58 29.31 35.49 29.37 35.55
With plug
8T5
A
Max.
B
Max.
With plug
8T6
A
Max.
B
Max.
With plug
8T15
A
Max.
B
Max.
With plug
8T16
A
Max.
B
Max.
8T0/8T4/8T10 types
square flange receptacle
With plug
8T5
A
Max.
B
Max.
With plug
8T6
A
Max.
B
Max.
With plug
8T15
A
Max.
B
Max.
With plug
8T16
A
Max.
B
Max.
27.77 33.95 27.83 34.01 28.74 34.92 28.80 34.98 24.60 30.78 24.66 30.64 25.57 31.75 25.63 31.81
Note: All dimensions are in millimeters (mm).
© 2013 - SOURIAU
23
8T Series
Common Section
Orientation ..........................................................................................................................................
26
Contacts:
Crimp contacts ...........................................................................................................................
Straight PC tail contacts ...........................................................................................................
Filler plugs ....................................................................................................................................
27
27
27
Tooling:
Insertion & extraction tools .....................................................................................................
Crimping tools .............................................................................................................................
Backshell tightening tools .......................................................................................................
Tightening support ....................................................................................................................
Loosening tools ..........................................................................................................................
28
28
28
28
28
Wiring instructions ...........................................................................................................................
29
Accessories:
Backshells & backshells assembly ........................................................................................
Metalic protective caps ............................................................................................................
Gaskets .........................................................................................................................................
Dummy receptacles ..................................................................................................................
30
36
37
37
Coordinates for straight PC tail terminations ...........................................................................
38
8T Series
MIL-DTL-38999 Series II
Orientation
D
37
°
37
°
10°
C
°
28
°
28
°
°
°
28
28
100°
10°
100°
37°
100°
D
10°
37°
© 2013 - SOURIAU
C
10°
26
37°
37°
08
100°
B
10°
10°
37°
100°
Shell size
37
°
A
100°
28
N
View from front
face of plug
10°
B
10°
37
°
37
°
10°
10°
100°
28°
100°
28°
100°
28°
28°
28°
View from front
face of receptacle
A
N
Polarization is determined by the master keyway position. The secondary keyway positions remain fixed.
100°
Angles (degrees)
N
A
B
C
D
100
82
-
-
118
10
100
86
72
128
114
12
100
80
68
132
120
14
100
79
66
134
121
16
100
82
70
130
118
18
100
82
70
130
118
20
100
82
70
130
118
22
100
85
74
126
115
24
100
85
74
126
115
8T Series
MIL-DTL-38999 Series II
Contacts
Crimp contacts
Contact size
#22D
#20
#16
#12
Contact type
Pin
Socket
Pin
Socket
Pin
Socket
Pin
Socket
Ø
Conductor section
External Ø
over insulator
AWG
mm²
Min Max Min Max
Min
Max
0.76
26
22
0.12
0.38
0.71
1.37
1.00
24
20
0.21
0.60
1.02
2.11
1.60
20
16
0.60
1.34
1.65
2.77
2.40
14
12
1.91
3.18
2.46
3.61
Souriau
Part number
MIL-DTL-38999 contacts
without color code
Part number
Color code
85990702JJ
MS39029/58-360
Black/Blue/Orange
85990710900
MS39029/57-354
Yellow/Green/Orange
85990703SA
MS39029/58-363
Orange/Blue/Orange
85990711900
MS39029/57-357
Purple/Green/Orange
85990704MJ
MS39029/58-364
Yellow/Blue/Orange
85990712900
MS39029/57-358
Grey/Green/Orange
85990705MJ
MS39029/58-365
Green/Blue/Orange
85990713900
MS39029/57-359
White/Green/Orange
Straight PC tail contacts
Contact size
Contact type
#22D
Pin
#20
Pin
#16
Pin
#12
Pin
Contact length
Part number
L: Long PC tail
85990720900
C: Short PC tail
85990730900
L: Long PC tail
85990771900
C: Short PC tail
85990724900
L: Long PC tail
85997496A900
C: Short PC tail
85990726900
C: Short PC tail
85997711900
Filler plugs
Contact
size
Filler plugs
MS
Part number (Rev. N)
Souriau
Part number
Color
#22D
MS27488-22-2
8660-212
Black
#20
MS27488-20-2
8522-389A
Red
#16
MS27488-16-2
8522-390A
Green
#12
MS27488-12-2
8522-391A
Orange
Direction of introduction
in grommet
These filler plugs are installed
at the rear of unwired contact
to maintain connector sealing.
© 2013 - SOURIAU
27
8T Series
MIL-DTL-38999 Series II
Tooling
Insertion & extraction tools
Color
Contact
size
Material
Part number
MIL Standard
Insertion
Extraction
#22D
Plastic
M81969/14-01
Green
White
#20
Plastic
M81969/14-10
Red
Orange
#16
Plastic
M81969/14-03
Blue
White
#12
Plastic
M81969/14-04
Yellow
White
Crimping tools
Wire sizes
Contact
type
Contact
size
mm²
AWG
#22D
0.38
0.21
0.15
0.095
22
24
26
28
#20
0.60
0.38
0.21
20
22
24
#16
1.34
0.93
0.60
16
18
20
#12
3.18
1.91
14
12
Turret Part number
Locator Part number
Norm
Souriau
Norm
Souriau
Pin
-
-
M22520/2-09
8476-09
Socket
-
-
M22520/2-07
8476-07
M22520/1-04
8365-04
M22520/2-10
8476-10
M22520/1-04
8365-04
-
-
-
-
M22520/1-04
8365-04
-
-
-
-
Pin
Socket
Pin
Socket
Pin
Socket
Backshell tightening tools
Tightening support
Backshell tightening pliers,
part number: 8498-03
Square jaws (order 2 jaws),
part number: 8500-1015
8498-03
Plier
M22520/2-01
(Souriau 8476-01)
Plier
M22520/1-01
8599-0802
Part number: 8599-0802
This tool is made up of
dummy receptacle
housings of all 9 sizes for all
key polarisation, and secures
free connectors during wiring
and fitting of rear accessories.
Tightening of rear accessories:
Shell size
Max torque
in m/daN
28
8
10
12
14
0.62
© 2013 - SOURIAU
16
18
20
22
1.24
24
Loosening tools
8498-04
Strap clamp,
part number: 8498-04
Spare strap,
part number: 8498-103
8T Series
MIL-DTL-38999 Series II
Wiring instructions
Cable preparation and wire stripping
Contact size
L (mm)
#22D
4
L
#20
#16
6
#12
Insertion of wire in contact barrel
Conductor
insulation
0.5 to 0.8 mm
Wire
When inserting the stripped wire into the contact barrel check that no
strands are left outside and that the wire is visible through the wire
inspection hole in the barrel.
Barrel
Inspection hole
Important:
- Slide any accessories over wire strands before carrying out the following operations.
- Contacts are inserted and extracted from the rear of the connector.
Insertion of the contacts
Extraction of the contacts
1 - Engage the crimp cable /
contact asembly into the
longitudinal slot of the plastic
tool (coloured tip).
Slide the tool down the
cable until the tip of the tool
abuts the contact retention
shoulder.
1 - Engage the appropriate
cable into the longitudinal
slot of the tool with the white
tip towards connector.
2 - Introduce the contact into
the required contact cavity
in the insulator, pushing tool
axially, until the contact
snaps into position in clip.
3 - Withdraw the tool (from
rear). Check that contact is
firmly locked by pulling wire
gently.
When connector is fully
loaded, check the position of
contact tips. They should all
be in the same plane.
Note: For larger sizes of
cable which are stiff enough
manual insertion without tool
is preferable.
1
2
3
2 - Slide the tool down
towards the contact. Insert
the tool in the insulator until
it abuts the contact shoulder.
3 - Holding the tool-contact
and cable assembly together,
remove them simultaneously.
1
2
3
© 2013 - SOURIAU
29
8T Series
MIL-DTL-38999 Series II
Aluminum backshells
Ordering information
Basic Series
8T
AB
05
A
16
W
S
Accessories type
Type:
01: Backnut
04: Crimp ring
02: Cable clamp
05: Band lock
03: Shrink boot
06: Double cone
Angle:
A: Straight
B: 90° (Type 02 only)
Shell size:
08, 10, 12, 14, 16, 18, 20, 22, 24
Finish:
Z: Black zinc nickel
W: Olive green cadmium
F: Nickel
A: Black anodized
Self locking option:
None
S: Self locking (available for Types 01 & 02 - mandatory for Type 05)
Cable entry (Type 05 only):
01, 02 (02 mandatory for shell size 08 & 10)
Drain hole option:
None
D: Drain hole (Type 03 only)
Dimensions
Aluminum backshell Type 01 - Backnut
9.65 Max
(Self locking type)
ØA
Thread
ØB
6.35 Max
(Non self locking type)
Shell
size
ØA Min
ØB Max
08
6.7
17.9
10
9.95
20.9
12
12.85
24.3
14
17.0
27.9
16
19.25
31.3
18
21.7
35.3
20
24.7
38.1
22
27.8
41.5
24
32.0
44.5
Thread: See page 33 for information.
Note: All dimensions are in millimeters (mm).
30
© 2013 - SOURIAU
01
-
8T Series
MIL-DTL-38999 Series II
Aluminum backshell Type 02 - Cable clamp
A Angle - straight
B Angle - 90°
F
C
Thread
C
ØB
ØA
Thread
ØB
D
ØA
E
Thread: See page 33 for information.
ØA
Shell
size
Min
Max
ØB Max
C Max
D Max
E Max
F Max
08
2.49
5.94
17.9
21.5
23.1
29.5
20
10
3.89
5.94
20.9
21.5
23.1
29.5
21.5
12
4.83
8.33
24.3
24.5
25.6
31.5
23.5
14
6.60
11.61
27.9
27.5
26.9
35.8
25.5
16
7.19
15.6
31.3
31.5
29.4
40.1
27.5
18
8.26
16.1
35.3
35.5
35.8
40.6
30.5
20
8.71
17.73
38.1
37
38.3
42.7
31.5
22
9.68
20.9
41.5
40.5
42.1
46.2
34.5
24
10.62
21.67
44.5
45
44.7
49
36.5
Aluminum backshell Type 03 - Shrink boot
Shell
size
ØC
ØA
Thread
ØB
18 Max
ØA Min
ØB Max
C Max
08
6.7
19.0
11.3
10
9.95
21.5
14.9
12
12.85
25.3
17.8
14
16.05
29.1
21.27
16
19.2
31.7
24.3
18
21.5
35.5
26.4
20
24.7
39.3
30.8
22
27.8
41.8
34.1
24
31
46.9
36.6
Thread: See page 33 for information.
Note: All dimensions are in millimeters (mm).
© 2013 - SOURIAU
31
8T Series
MIL-DTL-38999 Series II
Aluminum backshell Type 04 - Crimp ring
ØA
Thread
ØB
22 Max
Shell
size
ØA Min
ØB Max
08
10
12
14
16
18
20
22
24
6
8.2
10.5
13.6
16.9
20
23.2
26.1
28.1
17.9
20.9
24.3
27.9
31.3
34.3
38.1
41.5
44.4
Thread: See page 33 for information.
Aluminum backshell Type 05 - Band lock
Shell
size
08
10
12
14
16
18
20
22
24
ØA
Thread
ØB
34 Max
ØA Max - Entry size
01
02
6.6
8
8
11.2
11.2
14.4
12.8
16
16
19.1
16
20.7
17.6
23.9
19.1
25.5
ØB Max
17.9
24.9
29.3
32.4
35.6
38.4
41.6
44.8
47.9
Thread: See page 33 for information.
Aluminum backshell Type 06 - Double cone
ØC
30.00 Max
Note: All dimensions are in millimeters (mm).
32
© 2013 - SOURIAU
D
Thread
ØA
ØB
HE 308 standard - Screen termination and heat shrink boot
Shell size
08
10
12
14
16
18
20
22
24
ØA±0.07
7.1
10.25
13.05
15.25
18.45
20.65
23.85
26.95
30.15
ØB±0.12
15.55
18.45
21.85
25.05
28.05
31.05
34.45
37.45
40.75
Thread: See page 33 for information.
ØC±0.12
19.35
23.35
25.35
28.35
31.35
34.35
38.35
41.35
44.35
D±0.07
16.7
20.7
22.7
25.7
28.7
31.7
35.7
38.7
41.7
8T Series
MIL-DTL-38999 Series II
Recommended installation torque
Thread information
UNEF Thread
Shell Size
Installation Torque
(Inch-Pounds)
08
7/16-28 2B
08
40
10
9/16-24 2B
10
40
12
11/16-24 2B
12
40
14
13/16-20 2B
14
40
16
15/16-20 2B
16
40
18
1 1/16 -18 2B
18
40
20
1 3/16 -18 2B
20
80
22
1 5/16 -18 2B
22
80
24
1 7/16 -18 2B
24
80
Shell size
Note: Torque values are based on 80% of
the coupling thread strength specified in
SAE-AS85049 standard.
Band-it
Flat stainless steel
standard band
Pre-coiled
stainless steel
standard band
Hand
banding tool
Part number
8599-9344
8599-9345
8599-9346
4.0 (REF.)
362.1 ±1.5
0.5 (REF.)
1.9 (REF.)
8.9 (REF.)
Tail length indicator mark
6.1 (REF.)
Designation
Note: All dimensions are in millimeters (mm).
© 2013 - SOURIAU
33
8T Series
MIL-DTL-38999 Series II
Backshells assembly
Band lock Type 05
Step 1: Prepare cable braid
Step 4: Install band
Terminate wires to connector and screw the backshell to connector.
Prepare the cable for termination process.
WARNING ! Banding must occur on an un-fixtured cable assembly.
Attaching a band to a firmly clamped cable will affect the applied forces
and will also interfere with the cut-off operation. The cut-off operation
causes a rotation of the band termination in order to lock the band.
a ) Squeeze the gripper release lever of the banding tool and insert
the band into the front end opening of the tool as shown on picture.
WARNING ! The circular portion of looped band must always face
downward.
Cut-off handle
Retention lip
Conductors
Braid
Gripper
release
lever
Step 2: Push braid over adaptor
Push the braid over the retention lip to the adaptor incline point or
ensuring 10.2mm [0.4”] minimum braid length over termination area.
Milk the braid as required to remove the slack and insure a snug fit
around the shield termination area.
10.2
Minimum length of braid
over termination area
Adaptor Incline
Pull-up handle
b ) Aligning the band and the tool with the shield termination area,
squeeze the black pull-up handle repeatedly using short strokes until it
locks against the tool body (this indicates that the band is compressed
to the tool pre-calibrated tension).
IMPORTANT ! Operator technique can affect the integrity of the band
installation. The operator should use abbreviated or partial strokes
of the pull-up handle as the band is pulling up against the braid. As
the band becomes completely tight, apply a full strokes of the pull-up
handle to ensure that the full calibrated force of the tool is applied as
the handle locks into position.
c ) Complete the clamping process by squeezing the gray cut-off
handle, allowing the cable to rotate slightly during cut-off.
Step 3: Prepare band
Step 5: Inspect the shield termination
Roll the band through the buckle slot twice. Pull on the band until the
tail length indicator mark is within approximately 6.4 mm (0.250 in) of
the buckle slot. The band may be tightened further if desired.
WARNING ! Always roll band through the buckle slot twice in order to
ensure correct functioning.
Remove the excess band from the tool. Inspect shield termination.
Install the heat shrinkable boot, if required.
WARNING ! Tools and Bands should never be lubricated.
Buckle
Note: All dimensions are in millimeters (mm).
34
© 2013 - SOURIAU
Tail length indicator mark
8T Series
MIL-DTL-38999 Series II
Double cone Type 06
Step 1: Prepare cable braid
Step 3-a: Double folding
Prepare the cable for termination process and slide the backshell parts
onto the cable the items in the order shown in above figure. Screw the
backshell at the rear of the connector.
Fold back the braid on the inner cone and fix it with an adhesive tape
on to the jacket of the cable. Slide the outer cone over the braid and
the inner cone. Screw the backnut at the rear of the backshell and
tighten it. Install heat shrinkable boot.
Please refer to Step 3-b for alternate method (Single folding).
Conductors
Braid
Inner Outer Backnut Cable
cone cone
jacket
Backnut
Braid
Step 2: Push braid over adaptor
Release the braid and slide the inner cone over the braid.
Step 3-b: Single folding
Cut the braid as shown. Slide the outer cone over the braid and the inner cone. Screw the backnut at the rear of the backshell and tighten it.
Install heat-shrinkable boot.
Braid
Inner cone
Braid
Note: All dimensions are in millimeters (mm).
© 2013 - SOURIAU
35
8T Series
MIL-DTL-38999 Series II
Metalic protective caps
Ordering information
Basic Series
8T
E
01
B
14
Cap type:
E: Cap for receptacle
F: Cap for plug
Fixing type:
Cap for receptacle
01: Plastic sleeved metal cord with eyelet
02: Plastic sleeved metal cord with ring
Cap for plug
01: Plastic sleeved metal cord with eyelet
Plating:
B: Olive green cadmium
F: Nickel
Shell size:
08; 10; 12; 14; 16; 18; 20; 22; 24
Dimensions
Cap for receptacle
Type 01
Cap for receptacle
Type 02
Cap for plug
Type 01
A
A
A
D
E
F
F
Shell size
08
10
Ø A Max.
20.83
20.83
20.83
B Max.
19.05
21.82
26.19
Ø C Max.
18.29
21.59
25.40
ØD
3.12
3.12
3.12
ØE
22.61
25.65
28.96
F
76.20
76.20
88.90
Note: All dimensions are in millimeters (mm).
36
C
B
B
D
© 2013 - SOURIAU
12
F
14
16
18
20
22
20.83
20.83
29.36
32.54
28.70
3.12
24
20.83
20.83
20.83
20.83
35.71
38.89
41.68
44.86
31.75
35.05
38.10
41.40
44.45
3.12
3.12
3.12
3.12
3.53
32.00
35.31
38.35
41.66
44.70
48.01
88.90
88.90
88.90
101.60 101.60 101.60
8T Series
MIL-DTL-38999 Series II
Gaskets
Part Numbers
Shell size
For receptacle
Type 0
For receptacle
Type 7
08
8525 1431
AS3582-022
10
8525 1432
AS3582-024
12
8525 1433
AS3582-026
14
8525 1434
AS3582-028
16
8525 1435
AS3582-029
18
8525 1436
AS3582-030
20
8525 1437
AS3582-031
22
8525 1438
AS3582-032
24
8525 1439
AS3582-033
Dummy receptacles
Dimensions & Ordering information
B
C
ØA
11.28 ±0.06
1.62 ±0.08
ØD
Shell
size
B
A
D
Min.
Max.
C
Part Numbers
Min.
Max.
Olive green
cadmium plating
Nickel plating
08
13.24
20.57
21.10
15.09
3.08
3.30
8T3-08 G UR
8T3-08F UR
10
16.19
23.78
24.31
18.26
3.08
3.30
8T3-10G UR
8T3-10F UR
12
20.48
26.16
26.69
20.62
3.08
3.30
8T3-12G UR
8T3-12F UR
14
23.70
28.55
29.08
23.01
3.08
3.30
8T3-14G UR
8T3-14F UR
16
26.84
30.91
31.71
24.61
3.08
3.30
8T3-16G UR
8T3-16F UR
18
30.00
33.27
34.10
26.97
3.08
3.30
8T3-18G UR
8T3-18F UR
20
33.18
36.47
37.28
29.36
3.08
3.30
8T3-20G UR
8T3-20F UR
22
36.35
39.65
40.45
31.75
3.08
3.30
8T3-22G UR
8T3-22F UR
24
39.55
42.82
43.63
34.93
3.71
3.99
8T3-24G UR
8T3-24F UR
Note: All dimensions are in millimeters (mm).
© 2013 - SOURIAU
37
8T Series
MIL-DTL-38999 Series II
Coordinates for straight PC tail terminations
Viewed from front face of male insulator
Hole sizes: 1mm min. (#22 and #20 contacts) and 1.3mm min. (#16 contact) coordinates in mm.
08
35
98
+Y
-X
+X
-Y
+Y
Ctc
X
Y
1
+1.14
+1.98
2
+1.98
-1.14
3
0.00
-2.29
4
+1.98
-1.14
5
+1.14
+1.98
6
0.00
0.00
-X
+X
Ctc
X
Y
A
+1.65
+0.97
B
0.00
-1.90
C
-1.65
+0.97
-Y
10
05
35
98
99
+Y
+Y
+Y
+Y
-X
+X
-X
+X
-Y
38
-X
+X
-X
+X
-Y
-Y
-Y
Ctc
X
Y
Ctc
X
Y
Ctc
X
Y
Ctc
X
Y
A
+1.65
+1.42
1
0.00
+3.71
A
0.00
+3.30
A
+1.65
+2.85
B
+2.86
-1.65
2
+2.16
+3.00
B
+3.30
0.00
B
+3.30
0.00
C
0.00
-3.30
3
+3.51
+1.14
C
+1.65
-2.87
C
+1.65
-2.87
D
-2.86
-1.65
4
+3.51
-1.14
D
-1.65
-2.87
D
-1.65
-2.87
E
-1.65
+1.42
5
+2.16
-3.00
E
-3.30
0.00
E
-3.30
0.00
6
0.00
-3.71
F
0.00
0.00
F
-1.65
+2.87
7
-2.16
-3.00
G
0.00
0.00
8
-3.51
-1.14
© 2013 - SOURIAU
9
-3.51
+1.14
10
-2.16
+3.00
11
0
+1.42
12
+1.24
-0.89
13
-1.24
-0.89
8T Series
MIL-DTL-38999 Series II
12
04
08
35
98
+Y
+Y
+Y
+Y
-X
+X
-X
+X
-Y
-X
+X
-Y
-X
+X
-Y
-Y
Ctc
X
Y
Ctc
X
Y
Ctc
X
Y
Ctc
X
Y
Ctc
X
Y
A
0.00
+3.81
A
+1.65
+3.99
1
+1.14
+5.00
12
-4.62
+2.24
A
0.00
+4.95
B
+3.71
+0.89
B
+4.32
0.00
2
+3.20
+4.01
13
-3.20
+4.01
B
+3.18
+3.81
C
0.00
-2.11
C
+3.05
-3.05
3
+4.62
+2.24
14
-1.14
+5.00
C
+4.90
+0.76
D
-3.71
+0.89
D
0.00
-4.32
4
+5.16
0.00
15
+1.14
+2.72
D
+4.17
-2.67
E
-3.05
-3.05
5
+4.62
-2.24
16
+2.97
+0.66
E
0.00
-3.43
F
-4.32
0.00
6
+3.20
-4.01
17
+2.36
-1.91
F
-4.17
-2.67
G
-1.65
+3.99
7
+1.14
-5.00
18
0.00
-3.05
G
-4.90
+0.76
H
0.00
+1.12
8
-1.14
-5.00
19
-2.36
-1.91
H
-3.18
+3.81
9
-3.20
-4.01
20
-2.97
+0.66
J
+1.65
-0.38
10
-4.62
-2.24
21
-1.14
+2.72
K
-1.65
-0.38
11
-5.16
0.00
22
0.00
-0.76
14
05
18
19
+Y
+Y
+Y
-X
+X
-X
+X
-Y
-X
+X
-Y
-Y
Ctc
X
Y
Ctc
X
Y
Ctc
X
Y
Ctc
X
Y
Ctc
X
Y
A
0
+2.54
A
+1.65
+6.40
K
-4.95
+2.87
A
0.00
+5.72
L
-4.95
+2.87
B
+4.42
+0.61
B
+4.95
+2.87
L
-1.65
+6.40
B
+3.30
+5.72
M
-3.30
+5.72
C
+2.39
+3.76
C
+6.60
0.00
M
-1.65
+2.87
C
+4.95
+2.87
N
-1.65
+2.87
D
-2.39
-3.76
D
+4.95
-2.87
N
+1.65
+2.87
D
+6.60
0.00
P
+1.65
+2.87
E
-4.42
+0.61
E
+3.30
-5.72
P
+3.30
0.00
E
+4.95
-2.87
R
+3.30
0.00
F
0.00
-5.72
R
+1.65
-2.87
F
+3.30
-5.72
S
+1.65
-2.87
G
-3.30
-5.72
S
-1.65
-2.87
G
0.00
-5.72
T
-1.65
-2.87
H
-4.95
-2.87
T
-3.30
0.00
H
-3.30
-5.72
U
-3.30
0.00
J
-6.60
0.00
U
0.00
0.00
J
-4.95
-2.87
V
0.00
0.00
K
-6.60
0.00
© 2013 - SOURIAU
39
8T Series
MIL-DTL-38999 Series II
14
35
97
+Y
+Y
-X
+X
-Y
Ctc
X
Y
Ctc
X
Y
Ctc
X
Y
1
+1.14
+6.65
20
+3.12
+3.02
A
+1.65
+5.94
2
+3.12
+5.51
21
+4.32
+1.02
3
+5.36
+4.06
22
+4.32
-1.27
B
+4.52
+4.52
C
+5.84
4
+6.45
+2.03
23
+3.12
-0.58
-3.23
D
+4.52
5
+6.75
-0.25
24
-4.52
+1.14
-4.37
E
+1.65
6
+6.27
-2.49
-5.94
25
-1.14
-4.37
F
-2.26
7
+5.08
-4.45
-5.97
26
-3.12
-3.23
G
-5.26
-2.41
8
+3.30
9
+1.14
-5.89
27
-4.32
-1.27
H
-5.94
+1.65
-6.65
28
-4.32
+1.02
J
-4.52
10
-1.14
+4.52
-6.65
29
-3.12
+3.02
K
-1.65
11
-3.30
+5.94
-5.89
30
-1.14
+4.37
L
-1.19
+2.06
12
-5.08
-4.45
13
-6.27
-2.49
31
+1.14
+1.88
M
+1.19
-2.06
32
+2.29
-0.10
14
-6.76
-0.25
33
+1.14
-2.08
15
-6.45
+2.03
34
-1.14
-2.08
16
-5.36
+4.06
35
-2.29
-0.10
17
-3.12
+5.51
36
-1.14
+1.88
18
-1.14
+6.65
37
0.00
-0.10
19
+1.14
+4.37
-X
+X
-Y
16
06
08
26
+Y
+Y
+Y
-X
+X
-X
+X
-Y
40
-Y
-X
+X
-Y
Ctc
X
Y
J
-1.70
-7.98
K
-4.80
-6.60
L
-7.06
-4.09
M
-8.10
-0.86
N
-7.75
+2.51
+5.44
P
-6.07
R
-3.33
+7.44
S
-1.78
+4.50
T
+1.78
+4.50
Ctc
X
Y
Ctc
X
Y
Ctc
X
Y
U
+4.45
+2.39
A
+3.07
+5.31
A
0.00
+5.99
A
0.00
+8.15
V
+4.53
-0.91
B
+6.12
0.00
B
+3.25
+2.18
B
+3.33
+7.44
W
+3.02
-3.84
C
0.00
-6.12
C
+5.84
-1.98
C
+6.07
+5.44
X
0.00
-5.16
D
-6.12
0.00
D
+2.39
-5.49
D
+7.75
+2.51
Y
-3.02
-3.84
E
-3.07
+5.31
E
-2.39
-5.49
E
+8.10
-0.86
Z
-4.53
-0.91
F
0.00
0.00
F
-5.84
-1.98
F
+7.06
-4.09
a
-4.45
+2.39
G
-3.25
+2.18
G
+4.80
-6.60
b
0.00
+1.65
H
0.00
-1.32
H
+1.70
-7.98
c
0.00
-1.65
© 2013 - SOURIAU
8T Series
MIL-DTL-38999 Series II
16
35
Ctc
X
Y
Ctc
X
Y
Ctc
X
Y
1
-7.92
+2.18
20
-1.98
+1.04
38
+1.98
-5.82
2
-7.92
-0.10
21
-1.98
-1.24
39
+1.98
-8.10
3
-7.92
-2.39
22
-1.98
-3.53
40
+4.37
+7.09
+Y
-X
+X
-Y
99
+Y
Ctc
X
Y
A
0.00
+8.15
B
+3.33
+7.44
C
+6.07
+5.44
+2.51
4
-6.15
+5.61
23
-1.98
-5.82
41
+3.96
+4.47
D
+7.75
5
-5.94
+3.33
24
-1.98
-8.10
42
+3.96
+2.18
E
+8.10
-0.86
6
-5.94
+1.04
25
0.00
+8.36
43
+3.96
-0.10
F
+7.06
-4.09
7
-5.94
-1.24
26
0.00
+4.47
44
+3.96
-2.39
G
+4.80
-6.60
8
-5.94
-3.53
27
0.00
+2.18
45
+3.96
-4.67
H
+1.70
-7.98
9
-5.94
-5.82
28
0.00
-0.10
46
+3.96
-6.96
J
-1.70
-7.98
-X
+X
-Y
10
-4.37
+7.09
29
0.00
-2.39
47
+6.15
+5.61
K
-4.80
-6.60
11
-3.96
+4.47
30
0.00
+4.67
48
+5.94
+3.33
L
-7.06
-4.09
12
-3.96
+2.18
31
0.00
-6.96
49
+5.94
+1.04
M
-8.10
-0.86
13
-3.96
-0.10
32
+2.26
+8.03
50
+5.94
-1.24
N
-7.75
+2.51
+5.44
14
-3.96
-2.39
33
+1.98
+5.61
51
+5.94
-3.53
P
-6.07
15
-3.96
-4.67
34
+1.98
+3.33
52
+5.94
-5.82
R
-3.33
+7.44
16
-3.96
-6.96
35
+1.98
+1.04
53
+7.92
+2.18
S
-1.78
+4.50
17
-2.26
+8.03
36
+1.98
-1.24
54
+7.92
-0.10
T
+1.78
+4.50
18
-1.98
+5.61
37
+1.98
-3.53
55
+7.92
2-.39
U
+4.45
+2.39
19
-1.98
+3.33
V
+3.81
-1.91
W
0.00
-4.09
X
-3.81
-1.91
Y
-4.45
+2.39
Z
0.00
+0.64
18
11
32
+Y
-X
+X
-Y
Ctc
X
Y
A
+2.67
+6.60
+Y
Ctc
X
Y
Ctc
X
Y
A
+1.68
+8.97
T
-1.68
+8.97
B
+6.35
+3.35
B
+4.80
+7.75
U
0.00
+5.84
C
+6.99
-1.35
C
+7.26
+5.51
V
+3.15
+4.90
D
+4.55
-5.46
D
+8.76
+2.49
W
+5.31
+2.41
E
0.00
-7.14
E
+9.07
-0.84
X
+5.79
-0.84
F
-4.55
-5.46
F
+8.15
-4.06
Y
+4.42
-3.84
G
-6.99
-1.35
G
+6.15
-6.73
Z
+1.65
-5.61
H
-6.35
+3.35
H
+3.30
-8.51
a
-1.65
-5.61
J
-2.67
+6.60
J
0.00
-9.12
b
-4.42
-3.84
K
0.00
+2.67
K
-3.30
-8.51
c
-5.79
-0.84
L
0.00
-2.34
L
-6.15
-6.73
d
-5.31
+2.41
M
-8.15
-4.06
e
-3.15
+4.90
N
-9.07
-0.84
f
0.00
+2.44
P
-8.76
+2.49
g
+2.44
0.00
R
-7.26
+5.51
h
0.00
-2.44
S
-4.80
+7.75
j
-2.44
0.00
-X
+X
-Y
© 2013 - SOURIAU
41
8T Series
MIL-DTL-38999 Series II
18
35
+Y
-X
+X
-Y
Ctc
X
Y
Ctc
X
Y
Ctc
X
Y
Ctc
X
Y
Ctc
X
Y
1
-9.07
+2.29
15
-5.11
-4.57
28
-1.14
+2.29
41
+1.14
-6.86
54
+5.11
0.00
2
-9.07
+0.08
16
-5.11
-6.86
29
-1.14
0.00
42
+1.14
-9.14
55
+5.11
-2.29
3
-9.07
-2.29
17
-3.12
+8.00
30
-1.14
-2.29
43
+3.12
+8.00
56
+5.11
-4.57
4
-7.09
+5.72
18
+3.12
+5.72
31
-1.14
-4.57
44
+3.12
+5.72
57
+5.11
-6.86
5
-7.09
+3.43
19
-3.12
+3.43
32
-1.14
-6.86
45
+3.12
+3.43
58
+7.09
+5.72
6
-7.09
+1.14
20
-3.12
+1.14
33
-1.14
-9.14
46
+3.12
+1.14
59
+7.09
+3.43
7
-7.09
-1.14
21
-3.12
-1.14
34
+1.14
+9.14
47
+3.12
-1.14
60
+7.09
+1.14
8
-7.09
-3.43
22
-3.12
-3.43
35
+1.14
+6.86
48
+3.12
-3.43
61
+7.09
-1.14
9
-7.09
-5.72
23
-3.12
-5.72
36
+1.14
+4.57
49
+3.12
-5.72
62
+7.09
-3.43
10
-5.11
+6.86
24
-3.12
-8.00
37
+1.14
+2.29
50
+3.12
-8.00
63
+7.09
-5.72
11
-5.11
+4.57
25
-1.14
+9.14
38
+1.14
0.00
51
+5.11
+6.86
64
+9.07
+2.29
12
-5.11
+2.29
26
-1.14
+6.86
39
+1.14
-2.29
52
+5.11
+4.57
65
+9.07
0.00
13
-5.11
0.00
27
-1.14
+4.57
40
+1.14
-4.57
53
+5.11
+2.29
66
+9.07
-2.29
14
-5.11
-2.29
20
16
35
+Y
+Y
-X
+X
-Y
42
-X
+X
-Y
Ctc
X
Y
Ctc
X
Y
Ctc
X
Y
17
-5.89
-9.19
38
+4.67
-7.11
59
+1.22
-6.12
18
-7.77
-7.67
39
+2.49
-8.18
60
-1.22
-6.12
19
-9.27
-5.77
40
0.00
-8.81
61
-3.40
-5.05
-3.53
20
-10.31
-3.58
41
-2.49
-8.18
62
-5.28
Ctc
X
Y
Ctc
X
Y
21
-10.85
-1.22
42
-4.67
-7.11
63
-6.02
-1.22
A
+3.00
+8.18
1
+1.35
+10.82
22
-10.85
+1.22
43
-6.55
-5.59
64
-6.02
+1.22
B
+6.88
+5.36
2
+3.71
+10.26
23
-10.31
+3.58
44
-7.90
-3.58
65
-5.28
+3.53
C
+8.66
+0.91
3
+5.89
+9.19
24
-9.27
+5.77
45
-8.43
-1.22
66
-3.40
+5.05
D
+7.82
-3.81
4
+7.77
+7.67
25
-7.77
+7.67
46
-8.43
+1.22
67
-1.22
+3.71
E
+4.62
-7.37
5
+9.27
+5.77
26
-5.89
+9.19
47
-7.90
+3.58
68
+1.22
+3.71
F
0.00
-8.71
6
+10.31
+3.58
27
-3.71
+10.26
48
-6.55
+5.59
69
+3.18
+2.29
G
-4.62
-7.37
7
+10.85
+1.22
28
-1.35
+10.82
49
-4.67
+7.11
70
+3.94
0.00
H
-7.82
-3.81
8
+10.85
-1.22
29
0.00
+8.20
50
-2.49
+8.18
71
+3.18
-2.29
J
-8.66
+0.91
9
+10.31
-3.58
30
+2.49
+8.18
51
-1.22
+6.12
72
+1.22
-3.71
K
-6.88
+5.36
10
+9.27
-5.77
31
+4.67
+7.11
52
+1.22
+6.12
73
-1.22
-3.71
-2.29
L
-3.00
+8.18
11
+7.77
-7.67
32
+6.55
+5.59
53
+3.40
+5.05
74
-3.18
M
0.00
+4.45
12
+5.89
-9.19
33
+7.90
+3.58
54
+5.28
+3.53
75
-3.94
0.00
N
+3.91
+1.57
13
+3.71
-10.26
34
+8.43
+1.22
55
+6.02
+1.22
76
-3.18
+2.29
P
+2.39
-3.10
14
+1.35
-10.82
35
+8.43
-1.22
56
+6.02
-1.22
77
0.00
+1.35
R
-2.39
-3.10
15
-1.35
-10.82
36
+7.90
-3.58
57
+5.28
-3.53
78
+1.22
-0.74
S
-3.91
+1.57
16
-3.71
-10.26
37
+6.55
-5.59
58
+3.40
-5.05
79
-1.22
-0.74
© 2013 - SOURIAU
8T Series
MIL-DTL-38999 Series II
20
39
Ctc
X
Y
Ctc
X
Y
41
Ctc
X
Y
Ctc
X
Y
+Y
A
+1.65
+10.44
X
0.00
+7.49
+Y
A
0.00
+10.60
Y
+3.35
+6.38
-X
+X
-Y
B
+4.80
+9.42
Y
+3.20
+6.50
B
+3.28
+10.09
Z
+5.92
+4.09
C
+7.47
+7.47
Z
+5.89
+4.55
C
+6.23
+8.58
a
+7.15
+0.87
D
+9.42
+4.80
a
+7.11
+1.45
D
+8.58
+6.23
b
+6.73
-2.55
E
+10.44
+1.65
b
+7.11
-1.88
E
+10.09
+3.28
c
+4.78
-5.39
F
+10.44
-1.65
c
+5.51
-4.80
F
+10.60
0.00
d
+1.73
-6.99
G
+9.42
-4.80
d
+2.84
-6.73
G
+10.09
-3.28
e
-1.73
-6.99
H
+7.47
-7.47
e
-2.84
-6.73
H
+8.58
-6.23
f
-4.78
-5.39
J
+4.80
-9.42
f
-5.51
-4.80
J
+6.23
-8.58
g
-6.73
-2.55
K
+1.65
-10.44
g
-7.11
-1.88
K
+3.28
-10.09
h
-7.15
+0.87
-X
+X
-Y
L
-1.65
-10.44
h
-7.11
+1.45
L
0.00
-10.60
i
-5.92
+4.09
M
-4.80
-9.42
i
-5.89
+4.55
M
-3.26
-10.09
j
-3.35
+6.38
N
-7.47
-7.47
j
-3.20
+6.50
N
-6.23
-8.58
k
0.00
+3.81
P
-9.42
-4.80
k
0.00
+4.17
P
-8.58
-6.23
m
+2.98
+2.38
R
-10.44
-1.65
m
+2.90
+1.22
R
-10.09
-3.28
n
+3.71
-0.85
S
-10.44
+1.65
n
+2.69
-2.72
S
-10.60
0.00
p
-1.66
-3.43
T
-9.42
+4.80
p
0.00
-4.80
T
-10.09
+3.28
q
+1.66
-3.43
U
-7.47
+7.47
q
-2.69
-2.72
U
-8.58
+6.23
r
-3.71
-0.85
V
-4.80
+9.42
r
-2.90
+1.22
V
-6.23
+8.58
s
-2.98
+2.38
W
-1.65
+10.44
W
-3.28
+10.09
t
0.00
0.00
X
0.00
+7.20
Ctc
X
Y
22
21
+Y
-X
+X
-Y
Ctc
X
Y
53
A
+3.25
+9.78
+Y
Ctc
X
Y
m
-5.72
+6.60
B
+7.34
+7.24
N
-11.43
+3.30
n
-2.84
+8.26
C
+9.80
+3.12
P
-8.53
+8.26
p
0.00
+6.60
D
+10.16
-1.65
R
-5.72
+9.91
q
+2.84
+4.95
E
+8.33
-6.07
S
-2.84
+11.56
r
+5.72
+3.30
F
+4.65
-9.19
T
0.00
+9.91
s
+5.72
0.00
G
0.00
-10.31
U
+2.84
+8.26
t
+5.72
-3.30
H
-4.65
-9.19
V
+5.72
+6.60
u
+2.84
-4.95
J
-8.33
-6.07
W
+8.53
+4.95
v
0.00
-6.60
K
-10.16
-1.65
X
+8.53
+1.65
w
-2.84
-4.95
L
-9.80
+3.12
Y
+8.53
-1.65
x
-5.72
-3.30
M
-7.34
+7.24
Z
+8.53
-4.95
y
-5.72
0.00
N
-3.25
+9.78
a
+5.72
-6.60
z
-5.72
+3.30
+4.95
-X
+X
-Y
P
0.00
+6.22
b
+2.84
-8.26
AA
-2.84
R
+4.06
+3.71
Ctc
X
Y
Ctc
X
Y
c
0.00
-9.91
BB
0.00
+3.30
S
+5.44
-0.89
A
+2.84
+11.56
G
+8.53
-8.26
d
-2.84
-8.26
CC
+2.84
+1.65
T
+2.39
-4.93
B
+5.72
+9.91
H
+5.72
-10.41
e
-5.72
-6.60
DD
+2.84
-1.65
U
-2.39
-4.93
C
+8.53
+8.26
J
-5.72
-10.41
f
-8.53
-4.95
EE
0.00
-3.30
V
-5.44
-0.89
D
+11.43
+3.30
K
-8.53
-8.26
g
-8.53
-1.65
FF
-2.84
-1.65
W
-4.06
+3.71
E
+11.43
0.00
L
-11.43
-3.30
h
-8.53
+1.65
GG
-2.84
+1.65
X
0.00
0.00
F
+11.43
-3.30
M
-11.43
0.00
k
-8.53
+4.95
HH
0.00
0.00
© 2013 - SOURIAU
43
8T Series
MIL-DTL-38999 Series II
22
35
Ctc
X
Y
Ctc
X
Y
Ctc
X
Y
Ctc
X
Y
Ctc
X
Y
+Y
1
-10.87
+6.12
21
-6.32
-2.41
41
-2.11
-2.41
61
+2.11
0.00
81
+6.32
0.00
-X
+X
-Y
2
-11.86
+3.91
22
-6.32
-4.83
42
-2.11
-4.83
62
+2.11
-2.41
82
+6.32
-2.41
3
-12.40
+1.55
23
-6.32
-7.24
43
-2.11
-7.24
63
+2.11
-4.83
83
+6.32
-4.83
4
-10.54
0.00
24
-6.32
-9.65
44
-2.11
-9.65
64
+2.11
-7.24
84
+6.32
-7.24
5
-12.40
-1.55
25
-4.22
+10.87
45
-2.11
-12.07
65
+2.11
-9.65
85
+6.32
-9.65
6
-10.87
-3.61
26
-4.22
+8.46
46
0.00
+10.87
66
+2.11
-12.07
86
+8.43
+8.46
7
-10.87
-6.02
27
-4.22
+6.05
47
0.00
+8.46
67
+4.22
+10.87
87
+8.43
+6.05
8
-8.43
+8.46
28
-4.22
+3.63
48
0.00
+6.05
68
+4.22
+8.46
88
+8.43
+3.63
9
-8.43
+6.05
29
-4.22
+1.22
49
0.00
+3.63
69
+4.22
+6.05
89
+8.43
+1.22
10
-8.43
+3.63
30
-4.22
-1.19
50
0.00
+1.22
70
+4.22
+3.63
90
+8.43
-1.19
11
-8.43
+1.22
31
-4.22
-3.61
51
0.00
-1.19
71
+4.22
+1.22
91
+8.43
-3.61
12
-8.43
-1.19
32
-4.22
-6.02
52
0.00
-3.61
72
+4.22
-1.19
92
+8.43
-6.02
13
-8.43
-3.61
33
-4.22
-8.43
53
0.00
-6.02
73
+4.22
-3.61
93
+8.43
-8.43
14
-8.43
-6.02
34
-4.22
-10.85
54
0.00
-8.43
74
+4.22
-6.02
94
+10.87
+6.12
15
-8.43
-8.43
35
-2.11
+12.07
55
0.00
-10.85
75
+4.22
-8.43
95
+11.86
+3.91
16
-6.32
+9.65
36
-2.11
+9.65
56
+2.11
+12.07
76
+4.22
-10.85
96
+12.40
+1.55
17
-6.32
+7.24
37
-2.11
+7.24
57
+2.11
+9.65
77
+6.32
+9.65
97
+10.54
0.00
18
-6.32
+4.83
38
-2.11
+4.83
58
+2.11
+7.24
78
+6.32
+7.24
98
+12.40
-1.55
19
-6.32
+2.41
39
-2.11
+2.41
59
+2.11
+4.83
79
+6.32
+4.83
99
+10.87
-3.61
20
-6.32
0.00
40
-2.11
0.00
60
+2.11
+2.41
80
+6.32
+2.41
100
+10.87
-6.02
24
04
Ctc
X
Y
Ctc
X
Y
29
Ctc
X
Y
+Y
R
-8.23
-10.80
q
-7.90
-6.38
+Y
J
-2.31
-11.99
S
-10.77
-8.28
r
-9.58
-3.35
K
-6.68
-10.31
T
-12.52
-5.21
s
-10.46
0.00
L
-10.03
-7.04
U
-13.49
-1.75
t
-9.58
+3.35
M
-11.91
-2.77
+2.77
-X
+X
-Y
Ctc
44
-13.49
+1.75
u
-7.90
+6.38
N
-11.91
-12.52
+5.21
v
-5.38
+8.78
P
-10.03
+7.04
X
-10.77
+8.28
w
-2.18
+10.08
R
-6.55
+10.31
Y
-8.23
+10.80
x
+1.75
+6.66
S
-2.31
+8.15
Z
-5.16
+12.57
y
+4.37
+3.78
T
+2.31
+8.15
+4.93
-X
+X
a
-1.75
+13.49
z
+6.55
0.00
U
+5.79
b
+2.18
+10.08
AA
+4.37
-3.78
V
+8.10
0.00
c
+5.38
+8.78
BB
+1.75
-6.66
W
+6.10
-4.60
-Y
d
+7.90
+6.38
CC
-1.75
-6.66
Ctc
X
Y
X
+2.31
-7.37
e
+9.58
+3.35
DD
-4.37
-3.78
A
0.00
+12.22
Y
-2.31
-7.37
-5.21
f
+10.46
0.00
EE
-6.55
0.00
B
+6.55
+10.31
Z
-6.10
-4.60
-8.28
g
+9.58
-3.35
FF
-4.37
-3.78
C
+10.03
+7.04
a
-8.10
0.00
h
+7.90
-6.38
GG
-1.75
-6.66
D
+11.91
+2.77
b
-5.79
+4.93
+5.38
-8.78
HH
0.00
+3.35
E
+11.91
-2.77
c
0.00
+4.09
+2.18
-10.08
JJ
+2.18
0.00
F
+10.03
-7.04
d
+3.40
0.00
-2.18
-10.08
KK
0.00
-3.35
G
+6.68
-10.31
e
0.00
-3.30
-5.38
-8.78
LL
-2.18
0.00
H
+2.31
-11.99
f
-3.40
0.00
X
Y
Ctc
A
+1.75
+13.49
H
+12.52
B
+5.16
+12.57
J
+10.77
C
+8.23
+10.80
K
+8.23
-10.80
D
+10.77
+8.28
L
+5.16
-12.57
k
E
+12.52
+5.21
M
+1.75
-13.49
m
F
+13.49
+1.75
N
-1.75
-13.49
n
G
+13.49
-1.75
P
-5.16
-12.57
p
© 2013 - SOURIAU
X
V
W
Y
8T Series
MIL-DTL-38999 Series II
24
35
Ctc
X
Y
Ctc
X
Y
Ctc
X
Y
Ctc
X
Y
Ctc
X
Y
+Y
1
-12.17
+7.09
27
-6.32
+7.24
53
-2.11
0.00
79
+2.11
-7.24
104
+6.32
-12.07
2
-13.21
+4.83
28
-6.32
+4.83
54
-2.11
-2.41
80
+2.11
-9.65
105
+8.43
+11.28
3
-13.87
+2.41
29
-6.32
+2.41
55
-2.11
-4.83
81
+2.11
-12.07
106
+8.43
+8.43
4
-14.10
0.00
30
-6.32
0.00
56
-2.11
-7.24
82
+4.06
+13.49
107
+8.43
+6.02
5
-13.87
-2.41
31
-6.32
-2.41
57
-2.11
-9.65
83
+4.22
+10.85
108
+8.43
+3.61
6
-13.21
-4.83
32
-6.32
-4.83
58
-2.11
-12.07
84
+4.22
+8.43
109
+8.43
+1.19
-X
+X
-Y
7
-12.17
-7.09
33
-6.32
-7.24
59
0.00
+13.26
85
+4.22
+6.02
110
+8.43
-1.19
8
-10.77
+9.07
34
-6.32
-9.65
60
0.00
+10.85
86
+4.22
+3.61
111
+8.43
-3.61
9
-10.54
+4.83
35
-6.32
-12.07
61
0.00
+8.43
87
+4.22
+1.19
112
+8.43
-6.02
10
-10.54
+2.41
36
-4.06
+13.49
62
0.00
+6.02
88
+4.22
-1.19
113
+8.43
-8.43
11
-10.54
0.00
37
-4.22
+10.85
63
0.00
+3.61
89
+4.22
-3.61
114
+8.43
-10.85
12
-10.54
-2.41
38
-4.22
+8.43
64
0.00
+1.19
90
+4.22
-6.02
115
+10.77
+9.07
13
-10.54
-4.83
39
-4.22
+6.02
65
0.00
-1.19
91
+4.22
-8.43
116
+10.54
+4.83
+2.41
14
-10.77
-9.07
40
-4.22
+3.61
66
0.00
-3.61
92
+4.22
-10.85
117
+10.54
15
-8.43
+11.28
41
-4.22
+1.19
67
0.00
-6.02
93
+4.22
-13.26
118
+10.54
0.00
16
-8.43
+8.43
42
-4.22
-1.19
68
0.00
-8.43
94
+6.32
+12.60
119
+10.54
-2.41
-4.83
17
-8.43
+6.02
43
-4.22
-3.61
69
0.00
-10.85
95
+6.32
+9.65
120
+10.54
18
-8.43
+3.61
44
-4.22
-6.02
70
0.00
-14.10
96
+6.32
+7.24
121
+10.77
-9.07
19
-8.43
+1.19
45
-4.22
-8.43
71
+2.11
+12.07
97
+6.32
+4.83
122
+12.17
+7.09
20
-8.43
-1.19
46
-4.22
-10.85
72
+2.11
+9.65
98
+6.32
+2.41
123
+13.21
+4.83
21
-8.43
-3.61
47
-4.22
-13.26
73
+2.11
+7.34
99
+6.32
0.00
124
+13.87
+2.41
22
-8.43
-6.02
48
-2.11
+12.07
74
+2.11
+4.83
100
+6.32
-2.41
125
+14.10
0.00
23
-8.43
-8.43
49
-2.11
+9.65
75
+2.11
+2.41
101
+6.32
-4.83
126
+13.87
-2.41
24
-8.43
-10.85
50
-2.11
+7.24
76
+2.11
0.00
102
+6.32
-7.24
127
+13.21
-4.83
25
-6.32
+12.60
51
-2.11
+4.83
77
+2.11
-2.41
103
+6.32
-9.65
128
+12.17
-7.09
26
-6.32
+9.65
52
-2.11
+2.41
78
+2.11
-4.83
61
Ctc
X
Y
Ctc
X
Y
Ctc
X
Y
Ctc
X
Y
+Y
A
+4.98
+12.70
T
-12.98
-4.17
i
+6.38
-7.98
z
+5.79
-3.53
-5.92
-X
+X
-Y
B
+7.98
+11.05
U
-13.61
-0.76
j
+3.38
-9.63
AA
+3.33
C
+10.49
+8.71
V
-13.39
+2.57
k
0.00
-10.21
BB
0.00
-6.78
D
+12.32
+5.84
W
-12.32
+5.84
m
-3.38
-9.63
CC
-3.33
-5.92
E
+13.39
+2.57
X
-10.49
+8.71
n
-6.38
-7.98
DD
-5.79
-3.53
F
+13.61
-0.76
Y
-7.98
-11.05
p
-8.66
-5.41
EE
-6.78
-0.25
G
+12.98
-4.17
Z
-4.98
+12.10
q
-9.96
-2.24
FF
-6.02
+3.10
H
+11.53
-7.29
a
-1.73
+11.53
r
-10.13
+1.17
GG
-3.73
+5.66
J
+9.35
-9.93
b
+1.73
+11.53
s
-9.19
+4.45
HH
0.00
+5.08
K
+6.58
-11.94
c
+4.39
+9.22
t
-7.24
+7.19
JJ
+2.67
+2.39
L
+3.40
-13.18
d
+7.24
+7.19
u
-4.39
+9.22
KK
+3.43
-1.04
M
0.00
-13.64
e
+9.19
+4.45
v
0.00
+8.59
LL
0.00
-3.35
N
-3.40
-13.18
f
+10.13
+1.17
w
+3.73
+5.66
MM
-3.43
-1.04
P
-6.58
-11.94
g
+9.96
-2.24
x
+6.02
+3.10
NN
-2.67
+2.39
R
-9.35
-9.93
h
+8.66
-5.41
y
+6.78
-0.25
PP
0.00
0.00
S
-11.53
-7.29
© 2013 - SOURIAU
45
8T Series
Range Extension
Box mount interconnect solutions ..............................................................................................
48
Rack & panel ......................................................................................................................................
48
microComp® Series .........................................................................................................................
49
Double flange ....................................................................................................................................
49
Integrated clinch nut .......................................................................................................................
50
PCB contact without shoulder ......................................................................................................
50
Range Extension
Product range extension
Box Mount
Interconnect Solutions
Box Interconnect Solutions: Inside/Outside.
Anything you need - we can do !
PCB terminations:
. with many lengths and different types of plating.
Shape of connector can be adapted:
. to meet the board application as double flange receptacles.
Receptacles with short shell:
. to minimize space inside the box.
Any customized design:
. to make box mount easier when space is a constraint.
Blindmate/hermetic/thin panel assembly solutions...
See «Box Mount Interconnect Solutions» catalog
on www.souriau.com
Rack & Panel
Sealed rack & panel for blind connection. A 100%
scoop proof connector with quick connection in
hard-to-reach areas.
Blind connection:
. Easy & fast connection without any coupling/uncoupling
between a float-mounting unit & a fixed unit.
Float-mounting unit - rack:
. Female crimp contacts.
. Mounting on the cabinet side.
. Angular orientation with a key.
. Possibility to supply rear accessories.
Misalignment catching:
. Longitudinal, axial and angular.
See «38999 Series I - Rack & Panel 8LT» product
news on www.souriau.com
48
© 2013 - SOURIAU
Range Extension
Products Range Extension
micro Comp® Series
To respond to miniaturization and weight saving
trends in aeronautical and defense applications
SOURIAU has developed an innovative high
density connector range.
Very light & high density:
. Shell in composite (or aluminum).
. Up to 66% lighter than HD D-Sub.
. Very high density up to 40% smaller than HD D-Sub.
Excellent features:
. With crimp removable contacts for wire AWG 24 to 28
. Temperature up to 175°C
. High vibration and shock withstanding
. Standard MIL-STD 83513 accessories
. Compatible with high speed data rates (Gigabit Ethernet...)
Quick connect version for harsh environment:
. 104 contacts push-push
See «microComp® Series - Miniature High Density»
catalog on www.souriau.com
Double Flange
Double flange solution for PCB mount.
Specially designed for PCB applications in harsh
environments, decoupling vibration from the board.
Excellent mechanical performance:
. Standoffs integrated into the connector.
. No risk of breaking contacts and no risk of micro-cuts.
Design flexibility:
. Square flange or Jam nut versions available.
. Versatile contact length options.
A wide range:
. Available in aluminum with a range of layouts from shell size 9
to 25.
User friendly:
. Easy to assemble & time saving.
See «38999 Series III - Double Flange» product
news on www.souriau.com
© 2013 - SOURIAU
49
Range Extension
Product range extension
Integrated Clinch Nut
Integrated clinch nut solution for box mount.
Equivalent mounting retention of the receptacle
ensured with only 4 clinch nuts. Designed for
severe applications.
User friendly:
. Easy to install.
Selflocking:
. Fast and secure.
Reduced mounting hardware:
. Elimination of nuts and washers.
Foreign Object Debris reduction
See «38999 Series III - Clinch Nut» product news
on www.souriau.com
PCB Contact without
Shoulder
Pin & socket PCB contacts without shoulder #22D &
#20 as per MIL-DTL-38999 Series I, II & III.
Contacts without shoulder allows a more flexible
mounting on variable PCB thicknesses or depths.
Ruggedized contacts:
. Material: copper alloy
. Finish: gold per MIL-G-45204 type I class 1 over nickel plate
. Sleeve: stainless steel
Flexible mounting:
. Various PCB thicknesses.
. Multiple PCB positioning.
See «PCB contacts without shoulder» product
news on www.souriau.com
50
© 2013 - SOURIAU
contactmilaero@souriau.com
© Copyright SOURIAU July 2013 - All information in this document presents only general particulars and shall not form part of any contract. All rights reserved to SOURIAU for changes without prior notification or public announcement. Any duplication is prohibited, unless approved in writing.
www.souriau.com
Download PDF