CH-526RX
HDMI Splitter with Audio over CAT5e/6/7 Receiver
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer file, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2014 by Cypress Technology.
All Rights Reserved.
Version 1.0 July 2014
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
•
Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
•
To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
•
Never spill liquid of any kind on or into this product.
•
Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
•
Do not attach the power supply cabling to building surfaces.
•
Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
•
Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
•
To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO.
DATE DD/MM/YY SUMMARY OF CHANGE
VR0
19/03/15
Preliminary Release
CONTENTS
1. Introduction�������������������������������������������� 1
2. Applications������������������������������������������� 1
3. Package Contents�������������������������������� 1
4. System Requirements���������������������������� 1
5. Features�������������������������������������������������� 2
6. Operation Controls and Functions������� 3
6.1 Front Panel����������������������������������������3
6.2 Rear Panel�����������������������������������������4
6.3 IR Cable Pin Assignments����������������4
6.4 D-Sub 9 Pin Definition�����������������������5
7. Connection Diagram���������������������������� 6
8. Specifications���������������������������������������� 7
8.1 CAT5/6/7 Cable Specification�������8
9. Acronyms ���������������������������������������������� 8
1. INTRODUCTION
This HDMI and Audio over Single CAT5e/6/7 Receiver/Splitter can
receive uncompressed audio/video and data over a single run of
CAT5e/6/7 cable, from a Transmitter, up to distances of 100m. It has
the added benefit of simultaneous dual HDMI outputs with audio deembedding to a balanced or digital coaxial audio output and 2 bidirectional LAN serving connections, allowing devices such as Smart
TVs or games consoles to share a Internet connection. The unit has a
bidirectional PoC (Power over Cable) function that can power or be
powered by a compatible transmitter allowing for greater flexibility in
installations.
2. APPLICATIONS
• Extending incoming signal from CAT5e/6/7 to HDMI outputs
• Extending incoming signal from CAT5e/6/7 to both analog and
digital audio outputs
• Lecture room/Showroom/Meeting room/Classroom display and
control
3. PACKAGE CONTENTS
• 1 x HDMI Splitter with Audio over Single CAT5e/6/7 Receiver
• 1 x IR Receiver
• Operation Manual
4. SYSTEM REQUIREMENTS
HDBaseT compatible Transmitter input and output display with HDMI
input jack.
1
5. FEATURES
• Supports full range HDTV and PC output resolutions up to 4K2K and
WUXGA (RB)
• Receive uncompressed data over a single 100 m/328 ft CAT5e/6/7
cable
• 5Play™ convergence: Video, Audio, LAN, Bidirectional PoC &
Control (IR & RS-232 bypass)
• Supports bidirectional IR, Remote control and RS-232 (bypass)
• Provide with 24V DC power to or received from compatible PoC
Transmitter through CAT5e/6/7
• Supports Ethernet transmission rate up to 100Mbps
• Supports Balanced analog audio output (R/L) and HDMI input audio
sampling rate up to 192kHz
• Support coaxial digital audio up to 192kHz
Note:
1.The PoC function is designed for powering compatible Transmitter
units only—non-PoC Transmitter will need their own power supply.
Transmitters of another brand may not be compatible.
2.DO NOT connect the CAT5e/6/7 port with Transmitter's LAN/
CONTROL port. Doing so may trigger power shoot down and ruin
the device.
2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
DC 24V
LAN 1
LAN 2
CAT5e/6/7 IN
POWER
1
IR 1
IN
IR 2
OUT
USB
2
3
3
4
5
6
7
1 Power LED: This LED will illuminate when the device is connected to
a power supply.
2 DC 24V: Plug the 24 V DC power supply into the unit and connect
the adaptor to an AC outlet. Only one side of power is needed to
activate both Transmitter and Receiver when both obtain the PoC
function.
3 LAN 1/2: Connect to an active network for LAN sharing of a total
transmission rate up to 100Mbps. Or when a compatible LAN
equipped Transmitter is connected to an active network, this
allows the network access (including internet access if available)
to be shared between the Transmitter and Receiver. Connect any
Ethernet equipped device e.g. a Smart TV or games console to
the LAN port for that device to share the network internet access.
Note: DO NOT connect this slot with any of the CAT5e/6/7 port.
Doing so may trigger power shoot down and ruin the device.
4 CAT5e/6/7 IN: Connect from the Transmitter unit with a Single
CAT5e/6 cable for receiving all data signals.
5 IR IN: Connect to the supplied IR Receiver cables for IR signal
reception. Ensure that remote being used is within the direct lineof-sight of the IR Extender.
6 IR OUT: Connect to the supplied IR Blaster cable for IR signal
transmission. Place the IR Blaster in direct line-of-sight of the
equipment to be controlled.
7 USB: This port is reserved for firmware update only.
3
6.2 Rear Panel
- +
+ -
R
L
COAXIAL
OUT
1
2
RS-232
OUT
HDMI OUT 1
HDMI OUT 2
3
3
4
1 Balanced Analog R/L OUT: Connect to an amplifier or active
speaker with 3.5mm terminal block jack for audio output.
2 COAXIAL OUT: Connect to an amplifier or active speaker with
coaxial cable for audio output.
3 HDMI OUT 1/2: These slots are to connect with HDMI TV/Monitor for
output image display.
4 RS-232 OUT: This slot is to connect with D-Sub 9-pin cable from
device equipment for receiving RS-232 commands.
6.3 IR Cable Pin Assignments
IR Blaster
1 Power
2 IR Blaster Signal
3 NC
IR Receiver
1 IR Signal
2 Power
3 Grounding
4
6.4 D-Sub 9 Pin Definition
5
Pin
Define TX/RX
1
N/C
2
TxD / RxD
3
RxD / TxD
4
N/C
5
GND
6
N/C
7
N/C
8
N/C
9
N/C
7. CONNECTION DIAGRAM
DVD or Blu-ray Player
Compatible
Transmitter
IR2 Blaster
Link
Power
IR1 Extender
Internet Hub/
Router
(with Internet
Connection)
DC 24V
CAT5e/6 In
3m
7m
m
3m
60°
1.5m
60°
LAN 1
LAN 2
CAT5e/6/7 IN
POWER
IR 1
IN
IR 2
OUT
USB
- +
+ -
R
L
COAXIAL
OUT
RS-232
OUT
HDMI OUT 1
Digital Audio
Output (Optical)
HDMI OUT 2
RS-232 Equipped
PC or Notebook
Smart TV or
Game Console
6
8. SPECIFICATIONS
Ethernet Speed
100 Mbps
Video Bandwidth
340MHz / 10.2Gbps
Input Ports
1x CAT5e/6/7, 1 x IR Extender
Output Ports
2 x HDMI, 1 x Coaxial,
1 x Balanced Analog (R/L),
1×IR Blaster, 1 x RS-232, 2×LAN
CAT5e/6/7 Output Cable
Distance
Up to 100 Meters
HMDI Input/Output
Cable Distance
Up to 10 Meters@1080p or
5 Meters@4K2K
HDMI output Resolution
Up to 4K2K@24/25/30 & 4K2K@50/60
(YUV 420)
Audio Sampling Rate
Up to 96 kHz / Balanced Analog
Up to 192 kHz / Coaxial & HDMI
IR Frequency
30~50 kHz
ESD Protection
Human body model:
±8kV (air-gap discharge)
±6kV (contact discharge)
Power Supply
24 V/1.25 A DC (US/EU standards, CE/
FCC/UL certified)
Dimensions (mm)
145 (W) x 115 (D) x 30(H)/Jack Excluded
145 (W) x 128 (D) x 30(H)/Jack Included
Weight (g)
394
Chassis Material
Aluminum
Silkscreen Color
Black
Operating Temperature
0˚C ~ 40˚C / 32˚F ~ 104˚F
Storage Temperature
-20˚C ~ 60˚C / -4 ˚F ~ 140 ˚F
Relative Humidity
20 ~ 90% RH (non-condensing)
Power Consumption
12w
7
8.1 CAT5/6/7 Cable Specification
Cable
Range
Type
CAT5e/6/7
100 m
Pixel clock
Video Data
rate
Rate
<=225 MHz
<=5.3 Gbps
(HD Video)
CAT7
100m
CAT5e/6
70m
>225 MHz
Supported Video
Up to 1080p, 60 Hz,
36 bits, 3D (data
rates lower than 5.3
Gbps or below 225
MHz TMDS clock).
> 5.3 Gbps
4K2K, 30Hz video
(Ultra HD
formats
Video)
9. ACRONYMS
ACRONYM
COMPLETE TERM
CAT 5e
Category 5 Cable
CAT6
Category 6 Cable
CAT7
Category 7 Cable
HDMI
High-Definition Multimedia Interface
IR
Infrared
WUXGA (RB)
Widescreen Ultra Extended Graphics Array
(Reduce blanking)
8
CYPRESS TECHNOLOGY CO., LTD
Home page: http://www.cypress.com.tw
MPM-CH526RX
Download PDF