Compact USB Port Isolator UH201

Compact USB Port Isolator
UH201
PRODUCT FEATURES
•
•
•
•
•
USB has become the standard for connecting everything from sensors to
controllers and motor drives to your PC or hand held computer. But USB
was not intended for use outside of the electrically clean office or home
environment. This can lead to expensive problems when you need to
access data from a device installed in the field or in the factory.
Any time you connect remote I/O equipment to your computer there will be
a risk for electrostatic discharge (ESD), power surges, ground loops, and
electromagnetic interference /radio frequency interference (EMI/RFI). Any
one of these events could damage your USB port or your entire PC. Why
take a chance? Protect your investment with isolation technology from B&B
Electronics.
2000 Volt isolation
ESD protection – 4 kV contact
Compact, portable USB “key style” enclosure
USB 2.0 – full speed (12 Mbps)
Wide operating temperature (-40 to 80 C°)
Ordering Information
Model Number
Description
UH201
Compact USB Port Isolator
Accessories
USBAMBM-3F - 3 ft. (0.9 m), Type A Male to Type B Male (Grey)
USBAMBM-6F - 6 ft. (1.8 m) Type A Male to Type B Male (Grey)
The compact UH201 fits easily inside your laptop case or pocket. It has
male and female type A USB connectors. It connects directly to your
USB port and provides protection up to 2000 Volts. Its high speed digital
isolation chip electrically separates your PC from the remote I/O device
while allowing full speed USB 2.0 communications at data rates up to 12
Mbps – the top of the line for isolation products.
Note: High speed, 480 Mbps USB 2.0 devices cannot be isolated with today’s technology.
www.bb-elec.com
|
UH201_1814ds
Compact USB Port Isolator
UH201
specifications
USB INTERFACE
Standards
USB 2.0 (at USB 1.1 speed)
Upstream Port
Type A Male
Downstream Port
Type A Female
12 Mbps
Speed
Note: High speed 480 Mbps not possible with existing isolation technology.
Isolation
ESD
Power
Source
Downstream Power
Mechanical
Dimensions
Enclosure
Weight
MTBF
MTBF Calc. Method
Environmental
Operating Temperature
Storage Temperature
6.81 cm
2.68 in
2.0 kV
Level 2, ± 4 kV
1.70 cm
0.67 in
Bus powered
400 mA when connected to a high power USB port
Approvals / Certifications
Emissions FCC Class A, CISPR Class A (EN55022)
CE
EN61000-6-2:2005
(Light Industrial)
EN61000-4-2:2008
(ESD)
+/-4kV Air
EN61000-4-3:2006
(RI)
3V/m
EN61000-4-4:2004
(EFT Burst) 500V
EN61000-4-6:2005
(CI)
3 VRMS
Information – FCC Rules
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference that may cause undesired operation.
6.8 x 3.0 x 1.7 cm (2.7 x 1.2 x 0.7 in)
IP 30, plastic overmolded
2.98 cm
22.7 g (0.05 lbs)
1.17 in
2,624,561 hours
MIL 217F Parts Count Reliability
-40 to 80°C (-40 to 176°F)
-40 to 85°C (-40 to 185°F)
Mechanical diagram
1.70 cm
0.67 in
2.98 cm
1.17 in
6.81 cm
2.68 in
orders@bb-elec.com
support@bb-elec.com
International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104
European Office: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445
Download PDF