DIPLOMAT™
PEDESTAL SINK
VITREOUS CHINA
DIPLOMAT™ PEDESTAL SINK
• Vitreous china lavatory and pedestal
• Front overflow
• Fitting ledge with generous shelf area
• Supplied with mounting kit
(Faucet not included)
❏ 051-3924 Faucet holes on 4" (102mm) centers
(Illustrated)
❏ 051-3928 Faucet holes on 8" (203mm) centers
Nominal Dimensions:
552 x 470 x 864mm
(21-3/4" x 18-1/2" x 34")
Separate Components:
❏ 051-3904 Pedestal top 4" (102mm) centers
❏ 051-3908 Pedestal top 8" (203mm) centers
❏ 281-3900 Pedestal only
457 mm
(18)
FINISHED
WALL
95 mm
(3-3/4)
102 mm
(4)
184 mm
(7-1/4)
Bowl sizes:
445mm (17-1/2") wide
292mm (11-1/2") front to back
127mm (5-1/2") deep
470mm
(18-1/2)
Compliance Certifications Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures
PEDESTAL ANCHORING
SCREW HOLES
8 mm (5/16) DIA.
540 mm
(21-1/4)
13 mm
(1/2)
REF.
375mm
(14-3/4)
267mm
(10-1/2)
114mm
(4-1/2)
ANCHOR BOLT HOLES
(REQUIRED FOR SECURE
INSTALLATION)
10 mm (3/8) DIA.
191 mm
(7-1/2)
DRAIN
CHASE
S-9 HANGER
To Be Specified:
❏ Color: ❏ White
❏ Faucet:
❏ Faucet Finish:
❏ Supplies:
❏1-1/4" Trap:
27mm x 14mm
(1-1/16 x 5/16) SLOTS
178 mm
(7)
SUPPLIES AS
REQUIRED
1-1/4 O.D.
WASTE
1-1/4 O.D.
TAILPIECE
FINISHED
FLOOR
*584(23)mm
*
533 mm
(21)
864mm
(34)
749mm
(29-1/2)
OPEN
TO
FLOOR
203 mm
(8)
203 mm
(8)
PEDESTAL
SIDE SECTION
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
*SUGGESTED.
▼ ANCHOR SCREWS FOR PEDESTAL NOT INCLUDED.
INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.
■ SUITABLE FOR REINFORCEMENT ONLY, ACTUAL DIMENSIONS MUST
BE TAKEN FROM FIXTURE.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
© 2009 Eljer
13
Revised 3/09
Download PDF